9637 lines
467 KiB
Plaintext
9637 lines
467 KiB
Plaintext
! DOE Commercial Reference Building
|
|
! Large office, new construction 90.1-2004
|
|
! Version 1.3_5.0
|
|
! EnergyPlus Version 5.0
|
|
! ASHRAE Standards 90.1-2004 and 62-1999
|
|
!
|
|
! Description: 12 story plus basement, office building.
|
|
! Form: Area = 46,320 m2 (498,588 ft2); Number of Stories = 12; Shape = rectangle, Aspect ratio = 1.5
|
|
! Envelope: Envelope thermal properties vary with climate according to ASHRAE Standard 90.1-2004.
|
|
! Opaque constructions: mass walls; built-up flat roof (insulation above deck); slab-on-grade floor
|
|
! Windows: window-to-wall ratio = 38.0%, equal distribution of windows
|
|
! Infiltration in perimeter zones only
|
|
! = 0.4 cfm/ft2 above grade wall area at 0.3 in wc (75 Pa) adjusted to 0.016 in wc (4 Pa).
|
|
! 25% of full value when ventilation system on.
|
|
! HVAC: 2 water-cooled chillers, VAV with reheat and plenum zones
|
|
! Economizer per 90.1-2004
|
|
!
|
|
! Int. gains: lights = 10.76 W/m2 (1.0 W/ft2) (building area method);
|
|
! elec. plug loads = 10.76 W/m2 (1.0 W/ft2)
|
|
! gas plug load = 0 W/m2 (0 W/ft2)
|
|
! people = 2,397 total, 5.38/100 m2 (5.0/1000 ft2); basement 2.69/100 m2 (2.5/1000 ft2)
|
|
! elevators = 12 @ 25 HP each, 91% motor efficiency, motor heat exhausted directly
|
|
!
|
|
! Detached Shading: None
|
|
! Daylight: None
|
|
! Natural Ventilation: None
|
|
! Zonal Equipment: None
|
|
! Air Primary Loops: VAV WITH REHEAT
|
|
! Plant Loops: SHWSys1, HeatSys1, CoolSys1, TowerWaterSys
|
|
! System Equipment Autosize: Yes
|
|
! Purchased Cooling: None
|
|
! Purchased Heating: None
|
|
! Coils: Coil:Cooling:Water; Coil:Heating:Water
|
|
! Pumps: Yes
|
|
! Boilers: Boiler:HotWater (gas-fired)
|
|
! Chillers: Chiller:Electric:ReformulatedEIR (water-cooled)
|
|
!***** NOTICE *****
|
|
!***** The Reference Buildings were prepared as an account of work sponsored by an *****
|
|
!***** agency of the United States government. Neither the United States *****
|
|
!***** government nor any agency thereof, nor any of their employees, makes *****
|
|
!***** any warranty, express or implied, or assumes any legal liability or *****
|
|
!***** responsibility for the accuracy, completeness, or usefulness of any *****
|
|
!***** information, apparatus, product, or process disclosed, or represents *****
|
|
!***** that its use would not infringe privately owned rights. Reference *****
|
|
!***** herein to any specific commercial product, process, or service by *****
|
|
!***** trade name, trademark, manufacturer, or otherwise does not necessarily *****
|
|
!***** constitute or imply its endorsement, recommendation, or favoring by *****
|
|
!***** the United States government or any agency thereof. The views and *****
|
|
!***** opinions of authors expressed herein do not necessarily state or *****
|
|
!***** reflect those of the United States government or any agency thereof. *****
|
|
!***** Access to and use of the Reference Buildings imposes the following obligations *****
|
|
!***** on the user. The user agrees to credit DOE, NREL, PNNL, and LBNL in *****
|
|
!***** any publication(s) that that result from the use of Reference Buildings. *****
|
|
!***** However, the names of DOE/NREL/PNNL/LBNL may not be used in any *****
|
|
!***** advertising or publicity that implies endorsement or promotion of any *****
|
|
!***** products, services or commercial entities. *****
|
|
! Reference citation for the Commercial Reference Buildings:
|
|
! Deru, M.; Field, K.; Studer, D.; Benne, K.; Griffith, B.; Torcellini, P;
|
|
! Halverson, M.; Winiarski, D.; Liu, B.; Rosenberg, M.; Huang, J.;
|
|
! Yazdanian, M.; Crawley, D. (2010).
|
|
! U.S. Department of Energy Commercial Reference Building Models of the National Building Stock.
|
|
! Washington, DC: U.S. Department of Energy, Energy Efficiency and
|
|
! Renewable Energy, Office of Building Technologies.
|
|
! ***GENERAL SIMULATION PARAMETERS***
|
|
! Number of Zones: 19
|
|
|
|
Version,9.6;
|
|
|
|
SimulationControl,
|
|
YES, !- Do Zone Sizing Calculation
|
|
YES, !- Do System Sizing Calculation
|
|
YES, !- Do Plant Sizing Calculation
|
|
NO, !- Run Simulation for Sizing Periods
|
|
YES, !- Run Simulation for Weather File Run Periods
|
|
No, !- Do HVAC Sizing Simulation for Sizing Periods
|
|
1; !- Maximum Number of HVAC Sizing Simulation Passes
|
|
|
|
Building,
|
|
Ref Bldg Large Office New2004_v1.3_5.0, !- Name
|
|
0.0000, !- North Axis {deg}
|
|
City, !- Terrain
|
|
0.0400, !- Loads Convergence Tolerance Value {W}
|
|
0.2000, !- Temperature Convergence Tolerance Value {deltaC}
|
|
FullInteriorAndExterior, !- Solar Distribution
|
|
25, !- Maximum Number of Warmup Days
|
|
6; !- Minimum Number of Warmup Days
|
|
|
|
RunPeriod,
|
|
RUNPERIOD 1, !- Name
|
|
1, !- Begin Month
|
|
1, !- Begin Day of Month
|
|
, !- Begin Year
|
|
12, !- End Month
|
|
31, !- End Day of Month
|
|
, !- End Year
|
|
Sunday, !- Day of Week for Start Day
|
|
No, !- Use Weather File Holidays and Special Days
|
|
No, !- Use Weather File Daylight Saving Period
|
|
No, !- Apply Weekend Holiday Rule
|
|
Yes, !- Use Weather File Rain Indicators
|
|
Yes, !- Use Weather File Snow Indicators
|
|
; !- Treat Weather as Actual
|
|
|
|
! ***HOLIDAYS & DAYLIGHT SAVINGS***
|
|
|
|
RunPeriodControl:DaylightSavingTime,
|
|
2nd Sunday in March, !- Start Date
|
|
1st Sunday in November; !- End Date
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
New Years Day, !- Name
|
|
January 1, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Veterans Day, !- Name
|
|
November 11, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Christmas, !- Name
|
|
December 25, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Independence Day, !- Name
|
|
July 4, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
MLK Day, !- Name
|
|
3rd Monday in January, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Presidents Day, !- Name
|
|
3rd Monday in February, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Memorial Day, !- Name
|
|
Last Monday in May, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Labor Day, !- Name
|
|
1st Monday in September, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Columbus Day, !- Name
|
|
2nd Monday in October, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Thanksgiving, !- Name
|
|
4th Thursday in November,!- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
! ***SCHEDULE TYPES***
|
|
|
|
ScheduleTypeLimits,
|
|
Any Number; !- Name
|
|
|
|
ScheduleTypeLimits,
|
|
Fraction, !- Name
|
|
0.0, !- Lower Limit Value
|
|
1.0, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Temperature, !- Name
|
|
-60, !- Lower Limit Value
|
|
200, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
On/Off, !- Name
|
|
0, !- Lower Limit Value
|
|
1, !- Upper Limit Value
|
|
DISCRETE; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Control Type, !- Name
|
|
0, !- Lower Limit Value
|
|
4, !- Upper Limit Value
|
|
DISCRETE; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Humidity, !- Name
|
|
10, !- Lower Limit Value
|
|
90, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Number; !- Name
|
|
|
|
! ***ALWAYS ON SCHEDULE***
|
|
|
|
Schedule:Compact,
|
|
ALWAYS_ON, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1; !- Field 3
|
|
|
|
! ***MISC SIMULATION PARAMETERS***
|
|
|
|
SurfaceConvectionAlgorithm:Inside,TARP;
|
|
|
|
SurfaceConvectionAlgorithm:Outside,DOE-2;
|
|
|
|
HeatBalanceAlgorithm,ConductionTransferFunction,200.0000;
|
|
|
|
ZoneAirHeatBalanceAlgorithm,
|
|
AnalyticalSolution; !- Algorithm
|
|
|
|
Sizing:Parameters,
|
|
1.33, !- Heating Sizing Factor
|
|
1.33, !- Cooling Sizing Factor
|
|
6; !- Timesteps in Averaging Window
|
|
|
|
ConvergenceLimits,
|
|
2, !- Minimum System Timestep {minutes}
|
|
25; !- Maximum HVAC Iterations
|
|
|
|
ShadowCalculation,
|
|
PolygonClipping, !- Shading Calculation Method
|
|
Periodic, !- Shading Calculation Update Frequency Method
|
|
7, !- Shading Calculation Update Frequency
|
|
15000; !- Maximum Figures in Shadow Overlap Calculations
|
|
|
|
Timestep,6;
|
|
|
|
! WeatherFileName=USA_IL_Chicago-OHare_TMY2.epw
|
|
|
|
Site:Location,
|
|
USA IL-CHICAGO-OHARE, !- Name
|
|
41.77, !- Latitude {deg}
|
|
-87.75, !- Longitude {deg}
|
|
-6.00, !- Time Zone {hr}
|
|
190; !- Elevation {m}
|
|
|
|
! CHICAGO_IL_USA Annual Heating 99.6%, MaxDB=-20.6°C
|
|
|
|
SizingPeriod:DesignDay,
|
|
CHICAGO Ann Htg 99.6% Condns DB, !- Name
|
|
1, !- Month
|
|
21, !- Day of Month
|
|
WinterDesignDay, !- Day Type
|
|
-20.6, !- Maximum Dry-Bulb Temperature {C}
|
|
0.0, !- Daily Dry-Bulb Temperature Range {deltaC}
|
|
, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Day Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
-20.6, !- Wetbulb or DewPoint at Maximum Dry-Bulb {C}
|
|
, !- Humidity Condition Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily Wet-Bulb Temperature Range {deltaC}
|
|
99063., !- Barometric Pressure {Pa}
|
|
4.9, !- Wind Speed {m/s}
|
|
270, !- Wind Direction {deg}
|
|
No, !- Rain Indicator
|
|
No, !- Snow Indicator
|
|
No, !- Daylight Saving Time Indicator
|
|
ASHRAEClearSky, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless}
|
|
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless}
|
|
0.00; !- Sky Clearness
|
|
|
|
! CHICAGO_IL_USA Annual Cooling (WB=>MDB) .4%, MDB=31.2°C WB=25.5°C
|
|
|
|
SizingPeriod:DesignDay,
|
|
CHICAGO Ann Clg .4% Condns WB=>MDB, !- Name
|
|
7, !- Month
|
|
21, !- Day of Month
|
|
SummerDesignDay, !- Day Type
|
|
31.2, !- Maximum Dry-Bulb Temperature {C}
|
|
10.7, !- Daily Dry-Bulb Temperature Range {deltaC}
|
|
, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Day Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
25.5, !- Wetbulb or DewPoint at Maximum Dry-Bulb {C}
|
|
, !- Humidity Condition Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily Wet-Bulb Temperature Range {deltaC}
|
|
99063., !- Barometric Pressure {Pa}
|
|
5.3, !- Wind Speed {m/s}
|
|
230, !- Wind Direction {deg}
|
|
No, !- Rain Indicator
|
|
No, !- Snow Indicator
|
|
No, !- Daylight Saving Time Indicator
|
|
ASHRAEClearSky, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless}
|
|
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless}
|
|
1.00; !- Sky Clearness
|
|
|
|
Site:WaterMainsTemperature,
|
|
CORRELATION, !- Calculation Method
|
|
, !- Temperature Schedule Name
|
|
9.69, !- Annual Average Outdoor Air Temperature {C}
|
|
28.10; !- Maximum Difference In Monthly Average Outdoor Air Temperatures {deltaC}
|
|
|
|
Site:GroundTemperature:BuildingSurface,19.527,19.502,19.536,19.598,20.002,21.640,22.225,22.375,21.449,20.121,19.802,19.633;
|
|
|
|
! ***OPAQUE CONSTRUCTIONS AND MATERIALS***
|
|
! Exterior Walls
|
|
|
|
Construction,
|
|
Mass Non-res Ext Wall, !- Name
|
|
1IN Stucco, !- Outside Layer
|
|
8IN Concrete HW, !- Layer 2
|
|
Mass NonRes Wall Insulation, !- Layer 3
|
|
1/2IN Gypsum; !- Layer 4
|
|
|
|
Material,
|
|
Mass NonRes Wall Insulation, !- Name
|
|
MediumRough, !- Roughness
|
|
0.0495494599433393, !- Thickness {m}
|
|
0.049, !- Conductivity {W/m-K}
|
|
265.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! Roof
|
|
|
|
Construction,
|
|
IEAD Non-res Roof, !- Name
|
|
Roof Membrane, !- Outside Layer
|
|
IEAD NonRes Roof Insulation, !- Layer 2
|
|
Metal Decking; !- Layer 3
|
|
|
|
Material,
|
|
IEAD NonRes Roof Insulation, !- Name
|
|
MediumRough, !- Roughness
|
|
0.127338688569477, !- Thickness {m}
|
|
0.049, !- Conductivity {W/m-K}
|
|
265.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! Slab on grade, unheated
|
|
|
|
Construction,
|
|
ext-slab, !- Name
|
|
HW CONCRETE, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
! Interior Walls
|
|
|
|
Construction,
|
|
int-walls, !- Name
|
|
1/2IN Gypsum, !- Outside Layer
|
|
1/2IN Gypsum; !- Layer 2
|
|
|
|
! Interior Floors
|
|
|
|
Construction,
|
|
INT-FLOOR-TOPSIDE, !- Name
|
|
MAT-CC05 4 HW CONCRETE, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
Construction,
|
|
INT-FLOOR-UNDERSIDE, !- Name
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
MAT-CC05 4 HW CONCRETE; !- Layer 2
|
|
|
|
Construction,
|
|
Underground Wall Non-res,!- Name
|
|
8IN Concrete HW, !- Outside Layer
|
|
UGWall NonRes Insulation;!- Layer 2
|
|
|
|
Material,
|
|
UGWall NonRes Insulation,!- Name
|
|
MediumRough, !- Roughness
|
|
0.0001, !- Thickness {m}
|
|
0.049, !- Conductivity {W/m-K}
|
|
265.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! ***WINDOW/DOOR CONSTRUCTIONS AND MATERIALS***
|
|
|
|
Construction,
|
|
Window Non-res Fixed, !- Name
|
|
NonRes Fixed Assembly Window; !- Outside Layer
|
|
|
|
WindowMaterial:SimpleGlazingSystem,
|
|
NonRes Fixed Assembly Window, !- Name
|
|
3.23646, !- U-Factor {W/m2-K}
|
|
0.39, !- Solar Heat Gain Coefficient
|
|
; !- Visible Transmittance
|
|
|
|
! ***COMMON CONSTRUCTIONS AND MATERIALS***
|
|
|
|
Construction,
|
|
DropCeiling, !- Name
|
|
Std AC02; !- Outside Layer
|
|
|
|
Construction,
|
|
AIR-WALL, !- Name
|
|
MAT-AIR-WALL; !- Outside Layer
|
|
|
|
Construction,
|
|
InteriorFurnishings, !- Name
|
|
Std Wood 6inch; !- Outside Layer
|
|
|
|
Material,
|
|
Std Wood 6inch, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.15, !- Thickness {m}
|
|
0.12, !- Conductivity {W/m-K}
|
|
540.0000, !- Density {kg/m3}
|
|
1210, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.7000000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Wood Siding, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0100, !- Thickness {m}
|
|
0.1100, !- Conductivity {W/m-K}
|
|
544.6200, !- Density {kg/m3}
|
|
1210.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7800, !- Solar Absorptance
|
|
0.7800; !- Visible Absorptance
|
|
|
|
Material,
|
|
1/2IN Gypsum, !- Name
|
|
Smooth, !- Roughness
|
|
0.0127, !- Thickness {m}
|
|
0.1600, !- Conductivity {W/m-K}
|
|
784.9000, !- Density {kg/m3}
|
|
830.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.9200, !- Solar Absorptance
|
|
0.9200; !- Visible Absorptance
|
|
|
|
Material,
|
|
1IN Stucco, !- Name
|
|
Smooth, !- Roughness
|
|
0.0253, !- Thickness {m}
|
|
0.6918, !- Conductivity {W/m-K}
|
|
1858.0000, !- Density {kg/m3}
|
|
837.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.9200, !- Solar Absorptance
|
|
0.9200; !- Visible Absorptance
|
|
|
|
Material,
|
|
8IN CONCRETE HW, !- Name
|
|
Rough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
1.3110, !- Conductivity {W/m-K}
|
|
2240.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Metal Siding, !- Name
|
|
Smooth, !- Roughness
|
|
0.0015, !- Thickness {m}
|
|
44.9600, !- Conductivity {W/m-K}
|
|
7688.8600, !- Density {kg/m3}
|
|
410.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.2000, !- Solar Absorptance
|
|
0.2000; !- Visible Absorptance
|
|
|
|
Material,
|
|
HW CONCRETE, !- Name
|
|
Rough, !- Roughness
|
|
0.1016, !- Thickness {m}
|
|
1.3110, !- Conductivity {W/m-K}
|
|
2240.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
CP02 CARPET PAD, !- Name
|
|
VeryRough, !- Roughness
|
|
0.2165, !- Thermal Resistance {m2-K/W}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.8000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Roof Membrane, !- Name
|
|
VeryRough, !- Roughness
|
|
0.0095, !- Thickness {m}
|
|
0.1600, !- Conductivity {W/m-K}
|
|
1121.2900, !- Density {kg/m3}
|
|
1460.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Metal Decking, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0015, !- Thickness {m}
|
|
45.0060, !- Conductivity {W/m-K}
|
|
7680.0000, !- Density {kg/m3}
|
|
418.4000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.3000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Metal Roofing, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0015, !- Thickness {m}
|
|
45.0060, !- Conductivity {W/m-K}
|
|
7680.0000, !- Density {kg/m3}
|
|
418.4000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.3000; !- Visible Absorptance
|
|
|
|
Material,
|
|
MAT-CC05 4 HW CONCRETE, !- Name
|
|
Rough, !- Roughness
|
|
0.1016, !- Thickness {m}
|
|
1.3110, !- Conductivity {W/m-K}
|
|
2240.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! Acoustic tile for drop ceiling
|
|
|
|
Material,
|
|
Std AC02, !- Name
|
|
MediumSmooth, !- Roughness
|
|
1.2700000E-02, !- Thickness {m}
|
|
5.7000000E-02, !- Conductivity {W/m-K}
|
|
288.0000, !- Density {kg/m3}
|
|
1339.000, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.2000000; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
MAT-AIR-WALL, !- Name
|
|
Rough, !- Roughness
|
|
0.2079491, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7; !- Solar Absorptance
|
|
|
|
! ZONE LIST:
|
|
! Basement
|
|
! Core_bottom
|
|
! Core_mid (mult=10)
|
|
! Core_top
|
|
! GroundFloor_Plenum
|
|
! MidFloor_Plenum (mult=10)
|
|
! Perimeter_bot_ZN_1
|
|
! Perimeter_bot_ZN_2
|
|
! Perimeter_bot_ZN_3
|
|
! Perimeter_bot_ZN_4
|
|
! Perimeter_mid_ZN_1 (mult=10)
|
|
! Perimeter_mid_ZN_2 (mult=10)
|
|
! Perimeter_mid_ZN_3 (mult=10)
|
|
! Perimeter_mid_ZN_4 (mult=10)
|
|
! Perimeter_top_ZN_1
|
|
! Perimeter_top_ZN_2
|
|
! Perimeter_top_ZN_3
|
|
! Perimeter_top_ZN_4
|
|
! TopFloor_Plenum
|
|
! ***ZONES***
|
|
|
|
Zone,
|
|
Basement, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0400, !- Y Origin {m}
|
|
0.2000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Core_bottom, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Core_mid, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Core_top, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
GroundFloor_Plenum, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
No; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
MidFloor_Plenum, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
No; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_bot_ZN_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_bot_ZN_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_bot_ZN_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_bot_ZN_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_mid_ZN_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_mid_ZN_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_mid_ZN_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_mid_ZN_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_top_ZN_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_top_ZN_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_top_ZN_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Perimeter_top_ZN_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
TopFloor_Plenum, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
No; !- Part of Total Floor Area
|
|
|
|
! ***WALLS***
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_1, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_1_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_2, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_2_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_3, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_3_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_4, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_4_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling_5, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_bot_ZN_5_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,-2.4390, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,-2.4390; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Underground Wall Non-res,!- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Underground Wall Non-res,!- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Underground Wall Non-res,!- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Underground Wall Non-res,!- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7381,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Building_Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,47.5584, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,47.5584, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,47.5584, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,47.5584; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_bot_ZN_5_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
GroundFloor_Plenum_Floor_5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_bot_ZN_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_bot_ZN_5_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_2_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_bot_ZN_5_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,44.1650,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_bot_ZN_5_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_1_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_bot_ZN_5_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Core_bottom, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_4_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,44.1650,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_mid_ZN_5_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
MidFloor_Plenum_Floor_5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_mid_ZN_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_mid_ZN_5_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,19.8160, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,19.8160; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_mid_ZN_5_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_2_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_mid_ZN_5_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,44.1650,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_mid_ZN_5_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_1_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_mid_ZN_5_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Core_mid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_4_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,44.1650,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_top_ZN_5_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
TopFloor_Plenum_Floor_5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_top_ZN_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_top_ZN_5_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,43.5952, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,43.5952; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_top_ZN_5_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_2_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_top_ZN_5_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,44.1650,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_top_ZN_5_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_1_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Core_top_ZN_5_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Core_top, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_4_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,44.1650,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
GroundFloor_Plenum_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
GroundFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
GroundFloor_Plenum_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,3.9632, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,3.9632, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,3.9632, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.9632; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
GroundFloor_Plenum_Floor_1, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
GroundFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
GroundFloor_Plenum_Floor_2, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
GroundFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
GroundFloor_Plenum_Floor_3, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
GroundFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,44.1650,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
GroundFloor_Plenum_Floor_4, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
GroundFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
GroundFloor_Plenum_Floor_5, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
GroundFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_bot_ZN_5_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
GroundFloor_Plenum_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
GroundFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,3.9632, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,3.9632; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
GroundFloor_Plenum_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
GroundFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,3.9632, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,3.9632; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
GroundFloor_Plenum_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
GroundFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.9632, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,0.0000,3.9632; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
GroundFloor_Plenum_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
GroundFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7381,3.9632, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.9632; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
MidFloor_Plenum_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
MidFloor_Plenum_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,23.7792, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,23.7792, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,23.7792, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,0.0000,23.7792; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
MidFloor_Plenum_Floor_1, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
MidFloor_Plenum_Floor_2, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
MidFloor_Plenum_Floor_3, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7381,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
MidFloor_Plenum_Floor_4, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
MidFloor_Plenum_Floor_5, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_mid_ZN_5_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
MidFloor_Plenum_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,23.7792, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,23.7792; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
MidFloor_Plenum_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,23.7792, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,23.7792; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
MidFloor_Plenum_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,23.7792, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,0.0000,23.7792; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
MidFloor_Plenum_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7381,23.7792, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,23.7792; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
GroundFloor_Plenum_Floor_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_2_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_bot_ZN_5_Wall_South,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,0.0000,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_4_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
GroundFloor_Plenum_Floor_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_3_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_1_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,0.0000,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_bot_ZN_5_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,44.1650,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
GroundFloor_Plenum_Floor_3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_2_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,44.1650,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_bot_ZN_5_Wall_North,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,44.1650,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_4_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7381,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
GroundFloor_Plenum_Floor_4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,2.7440, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,2.7440, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling_4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_bot_ZN_5_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_3_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,44.1650,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_bot_ZN_1_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7381,2.7440, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,2.7440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
MidFloor_Plenum_Floor_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_1_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_1_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,19.8160, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,19.8160; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_2_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_mid_ZN_5_Wall_South,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,0.0000,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_1_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_4_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
MidFloor_Plenum_Floor_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_2_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_2_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,19.8160, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,19.8160; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_3_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_1_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,0.0000,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_2_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_mid_ZN_5_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,44.1650,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
MidFloor_Plenum_Floor_3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_3_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_3_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,19.8160, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,19.8160; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_2_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,44.1650,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_mid_ZN_5_Wall_North,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,44.1650,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_4_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7381,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
MidFloor_Plenum_Floor_4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,22.5600, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,22.5600, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_4_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_4_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,19.8160, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,19.8160; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_4_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_mid_ZN_5_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_4_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_3_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,44.1650,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_mid_ZN_1_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_mid_ZN_4_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7381,22.5600, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,19.8160, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,19.8160, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,22.5600; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
TopFloor_Plenum_Floor_1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_1_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_1_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,43.5952, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,43.5952; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_2_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_top_ZN_5_Wall_South,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,0.0000,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_1_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_4_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
TopFloor_Plenum_Floor_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_2_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_2_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,43.5952, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,43.5952; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_3_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_1_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,4.5732,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,0.0000,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_2_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_top_ZN_5_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,44.1650,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
TopFloor_Plenum_Floor_3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_3_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_3_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,43.5952, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,43.5952; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_2_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
68.5340,44.1650,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,44.1650,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_top_ZN_5_Wall_North,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,44.1650,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,44.1650,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_4_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7381,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
TopFloor_Plenum_Floor_4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_4_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_4_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,43.5952, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,43.5952; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_4_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_top_ZN_5_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,4.5732,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,4.5732,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_4_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_3_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5732,44.1650,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_1_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Perimeter_top_ZN_4_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7381,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,43.5952, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,43.5952, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
TopFloor_Plenum_Floor_1, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,4.5732,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
68.5340,4.5732,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
TopFloor_Plenum_Floor_2, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,4.5732,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
TopFloor_Plenum_Floor_3, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7381,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,44.1650,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,44.1650,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
TopFloor_Plenum_Floor_4, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Perimeter_top_ZN_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5732,44.1650,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
TopFloor_Plenum_Floor_5, !- Name
|
|
Floor, !- Surface Type
|
|
DropCeiling, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Core_top_ZN_5_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5732,44.1650,46.3392, !- X,Y,Z ==> Vertex 1 {m}
|
|
68.5340,44.1650,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
68.5340,4.5732,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5732,4.5732,46.3392; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
TopFloor_Plenum_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,47.5584, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7381,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7381,47.5584; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
TopFloor_Plenum_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,47.5584, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,0.0000,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,0.0000,47.5584; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
TopFloor_Plenum_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
73.1072,48.7381,47.5584, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,48.7381,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,47.5584; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
TopFloor_Plenum_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7381,47.5584, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7381,46.3392, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,46.3392, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,47.5584; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
! ***WINDOWS***
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_1_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,2.5000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.9146, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1070,0.0000,0.9146, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1070,0.0000,2.5000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_2_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,2.5000, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,0.9146, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7380,0.9146, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7380,2.5000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_3_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
73.1070,48.7381,2.5000, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1070,48.7381,0.9146, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,0.9146, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,2.5000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_bot_ZN_4_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,48.7380,2.5000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7380,0.9146, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.9146, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,2.5000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_mid_ZN_1_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Perimeter_mid_ZN_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,22.3160, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,20.7306, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1070,0.0000,20.7306, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1070,0.0000,22.3160; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_mid_ZN_2_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Perimeter_mid_ZN_2_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,22.3160, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,20.7306, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7380,20.7306, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7380,22.3160; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_mid_ZN_3_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Perimeter_mid_ZN_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
73.1070,48.7381,22.3160, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1070,48.7381,20.7306, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,20.7306, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,22.3160; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_mid_ZN_4_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Perimeter_mid_ZN_4_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,48.7380,22.3160, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7380,20.7306, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,20.7306, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,22.3160; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_top_ZN_1_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Perimeter_top_ZN_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,46.0952, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,44.5098, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1070,0.0000,44.5098, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1070,0.0000,46.0952; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_top_ZN_2_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Perimeter_top_ZN_2_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
73.1072,0.0000,46.0952, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1072,0.0000,44.5098, !- X,Y,Z ==> Vertex 2 {m}
|
|
73.1072,48.7380,44.5098, !- X,Y,Z ==> Vertex 3 {m}
|
|
73.1072,48.7380,46.0952; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_top_ZN_3_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Perimeter_top_ZN_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
73.1070,48.7381,46.0952, !- X,Y,Z ==> Vertex 1 {m}
|
|
73.1070,48.7381,44.5098, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7381,44.5098, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7381,46.0952; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Perimeter_top_ZN_4_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Perimeter_top_ZN_4_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,48.7380,46.0952, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7380,44.5098, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,44.5098, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,46.0952; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
! ***GEOMETRY RULES***
|
|
|
|
GlobalGeometryRules,
|
|
UpperLeftCorner, !- Starting Vertex Position
|
|
Counterclockwise, !- Vertex Entry Direction
|
|
Relative, !- Coordinate System
|
|
Relative; !- Daylighting Reference Point Coordinate System
|
|
|
|
! ***PEOPLE***
|
|
|
|
People,
|
|
Basement People, !- Name
|
|
Basement, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
37.16, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Core_bottom People, !- Name
|
|
Core_bottom, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Core_mid People, !- Name
|
|
Core_mid, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Core_top People, !- Name
|
|
Core_top, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_bot_ZN_1 People, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_bot_ZN_2 People, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_bot_ZN_3 People, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_bot_ZN_4 People, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_mid_ZN_1 People, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_mid_ZN_2 People, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_mid_ZN_3 People, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_mid_ZN_4 People, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_top_ZN_1 People, !- Name
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_top_ZN_2 People, !- Name
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_top_ZN_3 People, !- Name
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Perimeter_top_ZN_4 People, !- Name
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.58, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
! ***LIGHTS***
|
|
|
|
Lights,
|
|
Basement_Lights, !- Name
|
|
Basement, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Core_bottom_Lights, !- Name
|
|
Core_bottom, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Core_mid_Lights, !- Name
|
|
Core_mid, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Core_top_Lights, !- Name
|
|
Core_top, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_bot_ZN_1_Lights, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_bot_ZN_2_Lights, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_bot_ZN_3_Lights, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_bot_ZN_4_Lights, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_mid_ZN_1_Lights, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_mid_ZN_2_Lights, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_mid_ZN_3_Lights, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_mid_ZN_4_Lights, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_top_ZN_1_Lights, !- Name
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_top_ZN_2_Lights, !- Name
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_top_ZN_3_Lights, !- Name
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Perimeter_top_ZN_4_Lights, !- Name
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
! ***EQUIPMENT GAINS***
|
|
|
|
ElectricEquipment,
|
|
Basement_PlugMisc_Equip, !- Name
|
|
Basement, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Core_bottom_PlugMisc_Equip, !- Name
|
|
Core_bottom, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Core_mid_PlugMisc_Equip, !- Name
|
|
Core_mid, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Core_top_PlugMisc_Equip, !- Name
|
|
Core_top, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_bot_ZN_1_PlugMisc_Equip, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_bot_ZN_2_PlugMisc_Equip, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_bot_ZN_3_PlugMisc_Equip, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_bot_ZN_4_PlugMisc_Equip, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_mid_ZN_1_PlugMisc_Equip, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_mid_ZN_2_PlugMisc_Equip, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_mid_ZN_3_PlugMisc_Equip, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_mid_ZN_4_PlugMisc_Equip, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_top_ZN_1_PlugMisc_Equip, !- Name
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_top_ZN_2_PlugMisc_Equip, !- Name
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_top_ZN_3_PlugMisc_Equip, !- Name
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Perimeter_top_ZN_4_PlugMisc_Equip, !- Name
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
! ***EXTERIOR LOADS***
|
|
|
|
Exterior:Lights,
|
|
Exterior Facade Lighting,!- Name
|
|
ALWAYS_ON, !- Schedule Name
|
|
51262, !- Design Level {W}
|
|
AstronomicalClock, !- Control Option
|
|
Exterior Facade Lighting;!- End-Use Subcategory
|
|
|
|
Exterior:FuelEquipment,
|
|
Elevators, !- Name
|
|
Electricity, !- Fuel Use Type
|
|
BLDG_ELEVATORS, !- Schedule Name
|
|
244443.956043956, !- Design Level {W}
|
|
Elevators; !- End-Use Subcategory
|
|
|
|
! ***INFILTRATION***
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
GroundFloor_Plenum_Infiltration, !- Name
|
|
GroundFloor_Plenum, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
MidFloor_Plenum_Infiltration, !- Name
|
|
MidFloor_Plenum, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_bot_ZN_1_Infiltration, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_bot_ZN_2_Infiltration, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_bot_ZN_3_Infiltration, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_bot_ZN_4_Infiltration, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_mid_ZN_1_Infiltration, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_mid_ZN_2_Infiltration, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_mid_ZN_3_Infiltration, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_mid_ZN_4_Infiltration, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_top_ZN_1_Infiltration, !- Name
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_top_ZN_2_Infiltration, !- Name
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_top_ZN_3_Infiltration, !- Name
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Perimeter_top_ZN_4_Infiltration, !- Name
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
TopFloor_Plenum_Infiltration, !- Name
|
|
TopFloor_Plenum, !- Zone or ZoneList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
! ***INTERNAL MASS***
|
|
|
|
InternalMass,
|
|
Basement Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Basement, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
7126.2120; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Core_bottom Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Core_bottom, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
5064.6464; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Core_mid Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Core_mid, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
5064.6464; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Core_top Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Core_top, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
5064.6464; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_bot_ZN_1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
626.8394; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_bot_ZN_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
403.9503; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_bot_ZN_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
626.8257; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_bot_ZN_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
403.9503; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_mid_ZN_1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
626.8394; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_mid_ZN_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
403.9503; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_mid_ZN_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
626.8257; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_mid_ZN_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
403.9503; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_top_ZN_1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
626.8394; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_top_ZN_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
403.9503; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_top_ZN_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
626.8257; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Perimeter_top_ZN_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
403.9503; !- Surface Area {m2}
|
|
|
|
! ***INTERNAL GAINS SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
BLDG_ELEVATORS, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 04:00,0.05, !- Field 3
|
|
Until: 05:00,0.10, !- Field 5
|
|
Until: 06:00,0.20, !- Field 7
|
|
Until: 07:00,0.40, !- Field 9
|
|
Until: 09:00,0.50, !- Field 11
|
|
Until: 10:00,0.35, !- Field 13
|
|
Until: 16:00,0.15, !- Field 15
|
|
Until: 17:00,0.35, !- Field 17
|
|
Until: 19:00,0.50, !- Field 19
|
|
Until: 21:00,0.40, !- Field 21
|
|
Until: 22:00,0.30, !- Field 23
|
|
Until: 23:00,0.20, !- Field 25
|
|
Until: 24:00,0.10; !- Field 27
|
|
|
|
Schedule:Compact,
|
|
INFIL_QUARTER_ON_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,1.0, !- Field 3
|
|
Until: 22:00,0.25, !- Field 5
|
|
Until: 24:00,1.0, !- Field 7
|
|
For: Saturday WinterDesignDay, !- Field 9
|
|
Until: 06:00,1.0, !- Field 10
|
|
Until: 18:00,0.25, !- Field 12
|
|
Until: 24:00,1.0, !- Field 14
|
|
For: Sunday Holidays AllOtherDays, !- Field 16
|
|
Until: 24:00,1.0; !- Field 17
|
|
|
|
Schedule:Compact,
|
|
BLDG_OCC_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay, !- Field 2
|
|
Until: 06:00,0.0, !- Field 3
|
|
Until: 22:00,1.0, !- Field 5
|
|
Until: 24:00,0.05, !- Field 7
|
|
For: Weekdays, !- Field 9
|
|
Until: 06:00,0.0, !- Field 10
|
|
Until: 07:00,0.1, !- Field 12
|
|
Until: 08:00,0.2, !- Field 14
|
|
Until: 12:00,0.95, !- Field 16
|
|
Until: 13:00,0.5, !- Field 18
|
|
Until: 17:00,0.95, !- Field 20
|
|
Until: 18:00,0.7, !- Field 22
|
|
Until: 20:00,0.4, !- Field 24
|
|
Until: 22:00,0.1, !- Field 26
|
|
Until: 24:00,0.05, !- Field 28
|
|
For: Saturday, !- Field 30
|
|
Until: 06:00,0.0, !- Field 31
|
|
Until: 08:00,0.1, !- Field 33
|
|
Until: 14:00,0.5, !- Field 35
|
|
Until: 17:00,0.1, !- Field 37
|
|
Until: 24:00,0.0, !- Field 39
|
|
For: AllOtherDays, !- Field 41
|
|
Until: 24:00,0.0; !- Field 42
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 05:00,0.05, !- Field 3
|
|
Until: 07:00,0.1, !- Field 5
|
|
Until: 08:00,0.3, !- Field 7
|
|
Until: 17:00,0.9, !- Field 9
|
|
Until: 18:00,0.7, !- Field 11
|
|
Until: 20:00,0.5, !- Field 13
|
|
Until: 22:00,0.3, !- Field 15
|
|
Until: 23:00,0.1, !- Field 17
|
|
Until: 24:00,0.05, !- Field 19
|
|
For: Saturday, !- Field 21
|
|
Until: 06:00,0.05, !- Field 22
|
|
Until: 08:00,0.1, !- Field 24
|
|
Until: 14:00,0.5, !- Field 26
|
|
Until: 17:00,0.15, !- Field 28
|
|
Until: 24:00,0.05, !- Field 30
|
|
For: SummerDesignDay, !- Field 32
|
|
Until: 24:00,1.0, !- Field 33
|
|
For: WinterDesignDay, !- Field 35
|
|
Until: 24:00,0.0, !- Field 36
|
|
For: AllOtherDays, !- Field 38
|
|
Until: 24:00,0.05; !- Field 39
|
|
|
|
Schedule:Compact,
|
|
BLDG_EQUIP_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 08:00,0.40, !- Field 3
|
|
Until: 12:00,0.90, !- Field 5
|
|
Until: 13:00,0.80, !- Field 7
|
|
Until: 17:00,0.90, !- Field 9
|
|
Until: 18:00,0.80, !- Field 11
|
|
Until: 20:00,0.60, !- Field 13
|
|
Until: 22:00,0.50, !- Field 15
|
|
Until: 24:00,0.40, !- Field 17
|
|
For: Saturday, !- Field 19
|
|
Until: 06:00,0.30, !- Field 20
|
|
Until: 08:00,0.4, !- Field 22
|
|
Until: 14:00,0.5, !- Field 24
|
|
Until: 17:00,0.35, !- Field 26
|
|
Until: 24:00,0.30, !- Field 28
|
|
For: SummerDesignDay, !- Field 30
|
|
Until: 24:00,1.0, !- Field 31
|
|
For: WinterDesignDay, !- Field 33
|
|
Until: 24:00,0.0, !- Field 34
|
|
For: AllOtherDays, !- Field 36
|
|
Until: 24:00,0.30; !- Field 37
|
|
|
|
Schedule:Compact,
|
|
ACTIVITY_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,120; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
WORK_EFF_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
AIR_VELO_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CLOTHING_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 04/30, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0, !- Field 3
|
|
Through: 09/30, !- Field 5
|
|
For: AllDays, !- Field 6
|
|
Until: 24:00,0.5, !- Field 7
|
|
Through: 12/31, !- Field 9
|
|
For: AllDays, !- Field 10
|
|
Until: 24:00,1.0; !- Field 11
|
|
|
|
! ***HVAC EQUIPMENT***
|
|
|
|
Fan:VariableVolume,
|
|
VAV_1_Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.6045, !- Fan Total Efficiency
|
|
1017.592, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method
|
|
, !- Fan Power Minimum Flow Fraction
|
|
0.0000, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.93, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0407598940, !- Fan Power Coefficient 1
|
|
0.08804497, !- Fan Power Coefficient 2
|
|
-0.072926120, !- Fan Power Coefficient 3
|
|
0.9437398230, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Air Inlet Node Name
|
|
VAV_1 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan Energy; !- End-Use Subcategory
|
|
|
|
Fan:VariableVolume,
|
|
VAV_2_Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.6175, !- Fan Total Efficiency
|
|
1017.592, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method
|
|
, !- Fan Power Minimum Flow Fraction
|
|
0.0000, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.95, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0407598940, !- Fan Power Coefficient 1
|
|
0.08804497, !- Fan Power Coefficient 2
|
|
-0.072926120, !- Fan Power Coefficient 3
|
|
0.9437398230, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Air Inlet Node Name
|
|
VAV_2 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan Energy; !- End-Use Subcategory
|
|
|
|
Fan:VariableVolume,
|
|
VAV_3_Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.6045, !- Fan Total Efficiency
|
|
1017.592, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method
|
|
, !- Fan Power Minimum Flow Fraction
|
|
0.0000, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.93, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0407598940, !- Fan Power Coefficient 1
|
|
0.08804497, !- Fan Power Coefficient 2
|
|
-0.072926120, !- Fan Power Coefficient 3
|
|
0.9437398230, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
VAV_3_HeatC-VAV_3_FanNode, !- Air Inlet Node Name
|
|
VAV_3 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan Energy; !- End-Use Subcategory
|
|
|
|
Fan:VariableVolume,
|
|
VAV_5_Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.5915, !- Fan Total Efficiency
|
|
1109.648, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method
|
|
, !- Fan Power Minimum Flow Fraction
|
|
0.0000, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.91, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0407598940, !- Fan Power Coefficient 1
|
|
0.08804497, !- Fan Power Coefficient 2
|
|
-0.072926120, !- Fan Power Coefficient 3
|
|
0.9437398230, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
VAV_5_HeatC-VAV_5_FanNode, !- Air Inlet Node Name
|
|
VAV_5 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan Energy; !- End-Use Subcategory
|
|
|
|
Coil:Heating:Water,
|
|
Basement VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Basement VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Basement VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Basement VAV Box Damper Node, !- Air Inlet Node Name
|
|
Basement VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Core_bottom VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Core_bottom VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Core_bottom VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Core_bottom VAV Box Damper Node, !- Air Inlet Node Name
|
|
Core_bottom VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Core_mid VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Core_mid VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Core_mid VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Core_mid VAV Box Damper Node, !- Air Inlet Node Name
|
|
Core_mid VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Core_top VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Core_top VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Core_top VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Core_top VAV Box Damper Node, !- Air Inlet Node Name
|
|
Core_top VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Perimeter_bot_ZN_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Perimeter_bot_ZN_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Perimeter_bot_ZN_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Perimeter_bot_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_bot_ZN_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Perimeter_bot_ZN_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Perimeter_bot_ZN_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Perimeter_bot_ZN_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Perimeter_bot_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_bot_ZN_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Perimeter_bot_ZN_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Perimeter_bot_ZN_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Perimeter_bot_ZN_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Perimeter_bot_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_bot_ZN_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Perimeter_bot_ZN_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Perimeter_bot_ZN_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Perimeter_bot_ZN_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Perimeter_bot_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_bot_ZN_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Perimeter_mid_ZN_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Perimeter_mid_ZN_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Perimeter_mid_ZN_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Perimeter_mid_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_mid_ZN_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Perimeter_mid_ZN_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Perimeter_mid_ZN_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Perimeter_mid_ZN_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Perimeter_mid_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_mid_ZN_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Perimeter_mid_ZN_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Perimeter_mid_ZN_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Perimeter_mid_ZN_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Perimeter_mid_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_mid_ZN_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Perimeter_mid_ZN_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Perimeter_mid_ZN_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Perimeter_mid_ZN_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Perimeter_mid_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_mid_ZN_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Perimeter_top_ZN_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Perimeter_top_ZN_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Perimeter_top_ZN_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Perimeter_top_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_top_ZN_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Perimeter_top_ZN_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Perimeter_top_ZN_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Perimeter_top_ZN_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Perimeter_top_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_top_ZN_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Perimeter_top_ZN_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Perimeter_top_ZN_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Perimeter_top_ZN_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Perimeter_top_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_top_ZN_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Perimeter_top_ZN_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Perimeter_top_ZN_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Perimeter_top_ZN_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Perimeter_top_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Perimeter_top_ZN_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
VAV_1_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
VAV_1_HeatCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV_1_HeatCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV_1_CoolC-VAV_1_HeatCNode, !- Air Inlet Node Name
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
VAV_2_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
VAV_2_HeatCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV_2_HeatCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV_2_CoolC-VAV_2_HeatCNode, !- Air Inlet Node Name
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
VAV_3_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
VAV_3_HeatCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV_3_HeatCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV_3_CoolC-VAV_3_HeatCNode, !- Air Inlet Node Name
|
|
VAV_3_HeatC-VAV_3_FanNode, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
VAV_5_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
VAV_5_HeatCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV_5_HeatCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV_5_CoolC-VAV_5_HeatCNode, !- Air Inlet Node Name
|
|
VAV_5_HeatC-VAV_5_FanNode, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Cooling:Water,
|
|
VAV_3_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
VAV_3_CoolCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV_3_CoolCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV_3_OA-VAV_3_CoolCNode,!- Air Inlet Node Name
|
|
VAV_3_CoolC-VAV_3_HeatCNode, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
VAV_2_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
VAV_2_CoolCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV_2_CoolCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV_2_OA-VAV_2_CoolCNode,!- Air Inlet Node Name
|
|
VAV_2_CoolC-VAV_2_HeatCNode, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
VAV_1_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
VAV_1_CoolCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV_1_CoolCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV_1_OA-VAV_1_CoolCNode,!- Air Inlet Node Name
|
|
VAV_1_CoolC-VAV_1_HeatCNode, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
Coil:Cooling:Water,
|
|
VAV_5_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Inlet Water Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Outlet Air Temperature {C}
|
|
AUTOSIZE, !- Design Inlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
AUTOSIZE, !- Design Outlet Air Humidity Ratio {kgWater/kgDryAir}
|
|
VAV_5_CoolCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV_5_CoolCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV_5_OA-VAV_5_CoolCNode,!- Air Inlet Node Name
|
|
VAV_5_CoolC-VAV_5_HeatCNode, !- Air Outlet Node Name
|
|
SimpleAnalysis, !- Type of Analysis
|
|
CrossFlow; !- Heat Exchanger Configuration
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Basement VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Basement VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Basement VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Basement VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Basement VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Core_bottom VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Core_bottom VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Core_bottom VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Core_bottom VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Core_bottom VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Core_mid VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Core_mid VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Core_mid VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Core_mid VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Core_mid VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Core_top VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Core_top VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Core_top VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Core_top VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Core_top VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_bot_ZN_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_bot_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_bot_ZN_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Perimeter_bot_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_bot_ZN_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_bot_ZN_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_bot_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_bot_ZN_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Perimeter_bot_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_bot_ZN_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_bot_ZN_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_bot_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_bot_ZN_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Perimeter_bot_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_bot_ZN_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_bot_ZN_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_bot_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_bot_ZN_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Perimeter_bot_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_bot_ZN_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_mid_ZN_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_mid_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_mid_ZN_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Perimeter_mid_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_mid_ZN_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_mid_ZN_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_mid_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_mid_ZN_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Perimeter_mid_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_mid_ZN_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_mid_ZN_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_mid_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_mid_ZN_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Perimeter_mid_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_mid_ZN_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_mid_ZN_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_mid_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_mid_ZN_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Perimeter_mid_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_mid_ZN_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_top_ZN_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_top_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_top_ZN_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Perimeter_top_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_top_ZN_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_top_ZN_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_top_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_top_ZN_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Perimeter_top_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_top_ZN_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_top_ZN_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_top_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_top_ZN_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Perimeter_top_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_top_ZN_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Perimeter_top_ZN_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Perimeter_top_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Perimeter_top_ZN_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Perimeter_top_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Perimeter_top_ZN_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Basement Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Basement VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Core_bottom Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Core_bottom VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Core_mid Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Core_mid VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Core_top Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Core_top VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_bot_ZN_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_bot_ZN_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_bot_ZN_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_bot_ZN_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_bot_ZN_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_bot_ZN_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_bot_ZN_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_bot_ZN_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_mid_ZN_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_mid_ZN_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_mid_ZN_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_mid_ZN_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_mid_ZN_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_mid_ZN_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_mid_ZN_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_mid_ZN_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_top_ZN_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_top_ZN_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_top_ZN_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_top_ZN_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_top_ZN_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_top_ZN_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Perimeter_top_ZN_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Perimeter_top_ZN_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
! ***SIZING & CONTROLS***
|
|
|
|
Sizing:Zone,
|
|
Basement, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Basement, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Basement, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Core_bottom, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Core_bottom, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Core_bottom, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Core_mid, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Core_mid, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Core_mid, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Core_top, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Core_top, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Core_top, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_bot_ZN_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_bot_ZN_1, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_bot_ZN_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_bot_ZN_2, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_bot_ZN_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_bot_ZN_3, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_bot_ZN_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_bot_ZN_4, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_mid_ZN_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_mid_ZN_1, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_mid_ZN_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_mid_ZN_2, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_mid_ZN_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_mid_ZN_3, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_mid_ZN_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_mid_ZN_4, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_top_ZN_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_top_ZN_1, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_top_ZN_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_top_ZN_2, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_top_ZN_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_top_ZN_3, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Perimeter_top_ZN_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Perimeter_top_ZN_4, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.0125, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
ZoneControl:Thermostat,
|
|
Basement Thermostat, !- Name
|
|
Basement, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Basement DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Core_bottom Thermostat, !- Name
|
|
Core_bottom, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Core_bottom DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Core_mid Thermostat, !- Name
|
|
Core_mid, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Core_mid DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Core_top Thermostat, !- Name
|
|
Core_top, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Core_top DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_bot_ZN_1 Thermostat, !- Name
|
|
Perimeter_bot_ZN_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_bot_ZN_2 Thermostat, !- Name
|
|
Perimeter_bot_ZN_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_bot_ZN_3 Thermostat, !- Name
|
|
Perimeter_bot_ZN_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_bot_ZN_4 Thermostat, !- Name
|
|
Perimeter_bot_ZN_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_mid_ZN_1 Thermostat, !- Name
|
|
Perimeter_mid_ZN_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_mid_ZN_2 Thermostat, !- Name
|
|
Perimeter_mid_ZN_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_mid_ZN_3 Thermostat, !- Name
|
|
Perimeter_mid_ZN_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_mid_ZN_4 Thermostat, !- Name
|
|
Perimeter_mid_ZN_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_top_ZN_1 Thermostat, !- Name
|
|
Perimeter_top_ZN_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_top_ZN_2 Thermostat, !- Name
|
|
Perimeter_top_ZN_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_top_ZN_3 Thermostat, !- Name
|
|
Perimeter_top_ZN_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Perimeter_top_ZN_4 Thermostat, !- Name
|
|
Perimeter_top_ZN_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Basement DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Core_bottom DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Core_mid DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Core_top DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_bot_ZN_1 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_bot_ZN_2 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_bot_ZN_3 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_bot_ZN_4 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_mid_ZN_1 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_mid_ZN_2 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_mid_ZN_3 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_mid_ZN_4 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_top_ZN_1 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_top_ZN_2 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_top_ZN_3 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Perimeter_top_ZN_4 DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
Sizing:System,
|
|
VAV_1, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
0.3, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
16.7000, !- Central Heating Design Supply Air Temperature {C}
|
|
NonCoincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
OnOff; !- Central Cooling Capacity Control Method
|
|
|
|
Sizing:System,
|
|
VAV_2, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
0.3, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
16.7000, !- Central Heating Design Supply Air Temperature {C}
|
|
NonCoincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
OnOff; !- Central Cooling Capacity Control Method
|
|
|
|
Sizing:System,
|
|
VAV_3, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
0.3, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
16.7000, !- Central Heating Design Supply Air Temperature {C}
|
|
NonCoincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
OnOff; !- Central Cooling Capacity Control Method
|
|
|
|
Sizing:System,
|
|
VAV_5, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
0.3, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
16.7000, !- Central Heating Design Supply Air Temperature {C}
|
|
NonCoincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
OnOff; !- Central Cooling Capacity Control Method
|
|
|
|
Controller:OutdoorAir,
|
|
VAV_1_OA_Controller, !- Name
|
|
VAV_1_OARelief Node, !- Relief Air Outlet Node Name
|
|
VAV_1 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
VAV_1_OA-VAV_1_CoolCNode,!- Mixed Air Node Name
|
|
VAV_1_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
-100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
NoLockout, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
, !- Maximum Fraction of Outdoor Air Schedule Name
|
|
; !- Mechanical Ventilation Controller Name
|
|
|
|
Controller:OutdoorAir,
|
|
VAV_2_OA_Controller, !- Name
|
|
VAV_2_OARelief Node, !- Relief Air Outlet Node Name
|
|
VAV_2 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
VAV_2_OA-VAV_2_CoolCNode,!- Mixed Air Node Name
|
|
VAV_2_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
-100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
NoLockout, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
, !- Maximum Fraction of Outdoor Air Schedule Name
|
|
; !- Mechanical Ventilation Controller Name
|
|
|
|
Controller:OutdoorAir,
|
|
VAV_3_OA_Controller, !- Name
|
|
VAV_3_OARelief Node, !- Relief Air Outlet Node Name
|
|
VAV_3 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
VAV_3_OA-VAV_3_CoolCNode,!- Mixed Air Node Name
|
|
VAV_3_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
-100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
NoLockout, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
, !- Maximum Fraction of Outdoor Air Schedule Name
|
|
; !- Mechanical Ventilation Controller Name
|
|
|
|
Controller:OutdoorAir,
|
|
VAV_5_OA_Controller, !- Name
|
|
VAV_5_OARelief Node, !- Relief Air Outlet Node Name
|
|
VAV_5 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
VAV_5_OA-VAV_5_CoolCNode,!- Mixed Air Node Name
|
|
VAV_5_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
-100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
NoLockout, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
, !- Maximum Fraction of Outdoor Air Schedule Name
|
|
; !- Mechanical Ventilation Controller Name
|
|
|
|
SetpointManager:Scheduled,
|
|
VAV_1 SAT setpoint, !- Name
|
|
Temperature, !- Control Variable
|
|
Seasonal-Reset-Supply-Air-Temp-Sch, !- Schedule Name
|
|
VAV_1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:Scheduled,
|
|
VAV_2 SAT setpoint, !- Name
|
|
Temperature, !- Control Variable
|
|
Seasonal-Reset-Supply-Air-Temp-Sch, !- Schedule Name
|
|
VAV_2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:Scheduled,
|
|
VAV_3 SAT setpoint, !- Name
|
|
Temperature, !- Control Variable
|
|
Seasonal-Reset-Supply-Air-Temp-Sch, !- Schedule Name
|
|
VAV_3 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:Scheduled,
|
|
VAV_5 SAT setpoint, !- Name
|
|
Temperature, !- Control Variable
|
|
Seasonal-Reset-Supply-Air-Temp-Sch, !- Schedule Name
|
|
VAV_5 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
! ***AIR LOOPS***
|
|
|
|
AirLoopHVAC,
|
|
VAV_1, !- Name
|
|
VAV_1_Controllers, !- Controller List Name
|
|
VAV_1 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
VAV_1 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
VAV_1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
VAV_1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
VAV_1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
VAV_1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
AirLoopHVAC,
|
|
VAV_2, !- Name
|
|
VAV_2_Controllers, !- Controller List Name
|
|
VAV_2 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
VAV_2 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
VAV_2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
VAV_2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
VAV_2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
VAV_2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
AirLoopHVAC,
|
|
VAV_3, !- Name
|
|
VAV_3_Controllers, !- Controller List Name
|
|
VAV_3 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
VAV_3 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
VAV_3 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
VAV_3 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
VAV_3 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
VAV_3 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
AirLoopHVAC,
|
|
VAV_5, !- Name
|
|
VAV_5_Controllers, !- Controller List Name
|
|
VAV_5 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
VAV_5 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
VAV_5 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
VAV_5 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
VAV_5 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
VAV_5 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
! ***CONNECTIONS***
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Basement, !- Zone Name
|
|
Basement Equipment, !- Zone Conditioning Equipment List Name
|
|
Basement Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Basement Air Node, !- Zone Air Node Name
|
|
Basement Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Core_bottom, !- Zone Name
|
|
Core_bottom Equipment, !- Zone Conditioning Equipment List Name
|
|
Core_bottom Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Core_bottom Air Node, !- Zone Air Node Name
|
|
Core_bottom Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Core_mid, !- Zone Name
|
|
Core_mid Equipment, !- Zone Conditioning Equipment List Name
|
|
Core_mid Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Core_mid Air Node, !- Zone Air Node Name
|
|
Core_mid Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Core_top, !- Zone Name
|
|
Core_top Equipment, !- Zone Conditioning Equipment List Name
|
|
Core_top Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Core_top Air Node, !- Zone Air Node Name
|
|
Core_top Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_bot_ZN_1, !- Zone Name
|
|
Perimeter_bot_ZN_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_bot_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_bot_ZN_1 Air Node, !- Zone Air Node Name
|
|
Perimeter_bot_ZN_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_bot_ZN_2, !- Zone Name
|
|
Perimeter_bot_ZN_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_bot_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_bot_ZN_2 Air Node, !- Zone Air Node Name
|
|
Perimeter_bot_ZN_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_bot_ZN_3, !- Zone Name
|
|
Perimeter_bot_ZN_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_bot_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_bot_ZN_3 Air Node, !- Zone Air Node Name
|
|
Perimeter_bot_ZN_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_bot_ZN_4, !- Zone Name
|
|
Perimeter_bot_ZN_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_bot_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_bot_ZN_4 Air Node, !- Zone Air Node Name
|
|
Perimeter_bot_ZN_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_mid_ZN_1, !- Zone Name
|
|
Perimeter_mid_ZN_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_mid_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_mid_ZN_1 Air Node, !- Zone Air Node Name
|
|
Perimeter_mid_ZN_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_mid_ZN_2, !- Zone Name
|
|
Perimeter_mid_ZN_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_mid_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_mid_ZN_2 Air Node, !- Zone Air Node Name
|
|
Perimeter_mid_ZN_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_mid_ZN_3, !- Zone Name
|
|
Perimeter_mid_ZN_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_mid_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_mid_ZN_3 Air Node, !- Zone Air Node Name
|
|
Perimeter_mid_ZN_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_mid_ZN_4, !- Zone Name
|
|
Perimeter_mid_ZN_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_mid_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_mid_ZN_4 Air Node, !- Zone Air Node Name
|
|
Perimeter_mid_ZN_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_top_ZN_1, !- Zone Name
|
|
Perimeter_top_ZN_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_top_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_top_ZN_1 Air Node, !- Zone Air Node Name
|
|
Perimeter_top_ZN_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_top_ZN_2, !- Zone Name
|
|
Perimeter_top_ZN_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_top_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_top_ZN_2 Air Node, !- Zone Air Node Name
|
|
Perimeter_top_ZN_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_top_ZN_3, !- Zone Name
|
|
Perimeter_top_ZN_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_top_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_top_ZN_3 Air Node, !- Zone Air Node Name
|
|
Perimeter_top_ZN_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Perimeter_top_ZN_4, !- Zone Name
|
|
Perimeter_top_ZN_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
Perimeter_top_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Perimeter_top_ZN_4 Air Node, !- Zone Air Node Name
|
|
Perimeter_top_ZN_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Basement VAV Box, !- Name
|
|
Basement VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Basement VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Core_bottom VAV Box, !- Name
|
|
Core_bottom VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Core_bottom VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Core_mid VAV Box, !- Name
|
|
Core_mid VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Core_mid VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Core_top VAV Box, !- Name
|
|
Core_top VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Core_top VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_bot_ZN_1 VAV Box, !- Name
|
|
Perimeter_bot_ZN_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_bot_ZN_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_bot_ZN_2 VAV Box, !- Name
|
|
Perimeter_bot_ZN_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_bot_ZN_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_bot_ZN_3 VAV Box, !- Name
|
|
Perimeter_bot_ZN_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_bot_ZN_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_bot_ZN_4 VAV Box, !- Name
|
|
Perimeter_bot_ZN_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_bot_ZN_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_mid_ZN_1 VAV Box, !- Name
|
|
Perimeter_mid_ZN_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_mid_ZN_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_mid_ZN_2 VAV Box, !- Name
|
|
Perimeter_mid_ZN_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_mid_ZN_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_mid_ZN_3 VAV Box, !- Name
|
|
Perimeter_mid_ZN_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_mid_ZN_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_mid_ZN_4 VAV Box, !- Name
|
|
Perimeter_mid_ZN_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_mid_ZN_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_top_ZN_1 VAV Box, !- Name
|
|
Perimeter_top_ZN_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_top_ZN_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_top_ZN_2 VAV Box, !- Name
|
|
Perimeter_top_ZN_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_top_ZN_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_top_ZN_3 VAV Box, !- Name
|
|
Perimeter_top_ZN_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_top_ZN_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Perimeter_top_ZN_4 VAV Box, !- Name
|
|
Perimeter_top_ZN_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Perimeter_top_ZN_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
NodeList,
|
|
Basement Inlet Nodes, !- Name
|
|
Basement VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Core_bottom Inlet Nodes, !- Name
|
|
Core_bottom VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Core_mid Inlet Nodes, !- Name
|
|
Core_mid VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Core_top Inlet Nodes, !- Name
|
|
Core_top VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_bot_ZN_1 Inlet Nodes, !- Name
|
|
Perimeter_bot_ZN_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_bot_ZN_2 Inlet Nodes, !- Name
|
|
Perimeter_bot_ZN_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_bot_ZN_3 Inlet Nodes, !- Name
|
|
Perimeter_bot_ZN_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_bot_ZN_4 Inlet Nodes, !- Name
|
|
Perimeter_bot_ZN_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_mid_ZN_1 Inlet Nodes, !- Name
|
|
Perimeter_mid_ZN_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_mid_ZN_2 Inlet Nodes, !- Name
|
|
Perimeter_mid_ZN_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_mid_ZN_3 Inlet Nodes, !- Name
|
|
Perimeter_mid_ZN_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_mid_ZN_4 Inlet Nodes, !- Name
|
|
Perimeter_mid_ZN_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_top_ZN_1 Inlet Nodes, !- Name
|
|
Perimeter_top_ZN_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_top_ZN_2 Inlet Nodes, !- Name
|
|
Perimeter_top_ZN_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_top_ZN_3 Inlet Nodes, !- Name
|
|
Perimeter_top_ZN_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Perimeter_top_ZN_4 Inlet Nodes, !- Name
|
|
Perimeter_top_ZN_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
VAV_1_OANode List, !- Name
|
|
VAV_1_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
VAV_2_OANode List, !- Name
|
|
VAV_2_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
VAV_3_OANode List, !- Name
|
|
VAV_3_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
VAV_5_OANode List, !- Name
|
|
VAV_5_OAInlet Node; !- Node 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
VAV_1 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
VAV_1 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
VAV_2 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
VAV_2 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
VAV_3 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
VAV_3 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
VAV_5 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
VAV_5 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManager:NightCycle,
|
|
VAV_1 Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
VAV_2 Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
VAV_3 Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
VAV_5 Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
BranchList,
|
|
VAV_1 Air Loop Branches, !- Name
|
|
VAV_1 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
VAV_2 Air Loop Branches, !- Name
|
|
VAV_2 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
VAV_3 Air Loop Branches, !- Name
|
|
VAV_3 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
VAV_5 Air Loop Branches, !- Name
|
|
VAV_5 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
Branch,
|
|
VAV_1 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
VAV_1_OA, !- Component 1 Name
|
|
VAV_1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_1_OA-VAV_1_CoolCNode,!- Component 1 Outlet Node Name
|
|
Coil:Cooling:Water, !- Component 2 Object Type
|
|
VAV_1_CoolC, !- Component 2 Name
|
|
VAV_1_OA-VAV_1_CoolCNode,!- Component 2 Inlet Node Name
|
|
VAV_1_CoolC-VAV_1_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Water, !- Component 3 Object Type
|
|
VAV_1_HeatC, !- Component 3 Name
|
|
VAV_1_CoolC-VAV_1_HeatCNode, !- Component 3 Inlet Node Name
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Component 3 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 4 Object Type
|
|
VAV_1_Fan, !- Component 4 Name
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Component 4 Inlet Node Name
|
|
VAV_1 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name
|
|
|
|
Branch,
|
|
VAV_2 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
VAV_2_OA, !- Component 1 Name
|
|
VAV_2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_2_OA-VAV_2_CoolCNode,!- Component 1 Outlet Node Name
|
|
Coil:Cooling:Water, !- Component 2 Object Type
|
|
VAV_2_CoolC, !- Component 2 Name
|
|
VAV_2_OA-VAV_2_CoolCNode,!- Component 2 Inlet Node Name
|
|
VAV_2_CoolC-VAV_2_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Water, !- Component 3 Object Type
|
|
VAV_2_HeatC, !- Component 3 Name
|
|
VAV_2_CoolC-VAV_2_HeatCNode, !- Component 3 Inlet Node Name
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Component 3 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 4 Object Type
|
|
VAV_2_Fan, !- Component 4 Name
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Component 4 Inlet Node Name
|
|
VAV_2 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name
|
|
|
|
Branch,
|
|
VAV_3 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
VAV_3_OA, !- Component 1 Name
|
|
VAV_3 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_3_OA-VAV_3_CoolCNode,!- Component 1 Outlet Node Name
|
|
Coil:Cooling:Water, !- Component 2 Object Type
|
|
VAV_3_CoolC, !- Component 2 Name
|
|
VAV_3_OA-VAV_3_CoolCNode,!- Component 2 Inlet Node Name
|
|
VAV_3_CoolC-VAV_3_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Water, !- Component 3 Object Type
|
|
VAV_3_HeatC, !- Component 3 Name
|
|
VAV_3_CoolC-VAV_3_HeatCNode, !- Component 3 Inlet Node Name
|
|
VAV_3_HeatC-VAV_3_FanNode, !- Component 3 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 4 Object Type
|
|
VAV_3_Fan, !- Component 4 Name
|
|
VAV_3_HeatC-VAV_3_FanNode, !- Component 4 Inlet Node Name
|
|
VAV_3 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name
|
|
|
|
Branch,
|
|
VAV_5 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
VAV_5_OA, !- Component 1 Name
|
|
VAV_5 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_5_OA-VAV_5_CoolCNode,!- Component 1 Outlet Node Name
|
|
Coil:Cooling:Water, !- Component 2 Object Type
|
|
VAV_5_CoolC, !- Component 2 Name
|
|
VAV_5_OA-VAV_5_CoolCNode,!- Component 2 Inlet Node Name
|
|
VAV_5_CoolC-VAV_5_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Water, !- Component 3 Object Type
|
|
VAV_5_HeatC, !- Component 3 Name
|
|
VAV_5_CoolC-VAV_5_HeatCNode, !- Component 3 Inlet Node Name
|
|
VAV_5_HeatC-VAV_5_FanNode, !- Component 3 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 4 Object Type
|
|
VAV_5_Fan, !- Component 4 Name
|
|
VAV_5_HeatC-VAV_5_FanNode, !- Component 4 Inlet Node Name
|
|
VAV_5 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV_1_Controllers, !- Name
|
|
Controller:WaterCoil, !- Controller 1 Object Type
|
|
VAV_1_CoolC_Controller, !- Controller 1 Name
|
|
Controller:WaterCoil, !- Controller 2 Object Type
|
|
VAV_1_HeatC_Controller; !- Controller 2 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV_1_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
VAV_1_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV_2_Controllers, !- Name
|
|
Controller:WaterCoil, !- Controller 1 Object Type
|
|
VAV_2_CoolC_Controller, !- Controller 1 Name
|
|
Controller:WaterCoil, !- Controller 2 Object Type
|
|
VAV_2_HeatC_Controller; !- Controller 2 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV_2_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
VAV_2_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV_3_Controllers, !- Name
|
|
Controller:WaterCoil, !- Controller 1 Object Type
|
|
VAV_3_CoolC_Controller, !- Controller 1 Name
|
|
Controller:WaterCoil, !- Controller 2 Object Type
|
|
VAV_3_HeatC_Controller; !- Controller 2 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV_3_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
VAV_3_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV_5_Controllers, !- Name
|
|
Controller:WaterCoil, !- Controller 1 Object Type
|
|
VAV_5_CoolC_Controller, !- Controller 1 Name
|
|
Controller:WaterCoil, !- Controller 2 Object Type
|
|
VAV_5_HeatC_Controller; !- Controller 2 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV_5_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
VAV_5_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
VAV_1_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
VAV_1_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
VAV_2_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
VAV_2_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
VAV_3_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
VAV_3_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
VAV_5_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
VAV_5_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
VAV_1_OA, !- Name
|
|
VAV_1_OA_Controllers, !- Controller List Name
|
|
VAV_1_OA_Equipment; !- Outdoor Air Equipment List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
VAV_2_OA, !- Name
|
|
VAV_2_OA_Controllers, !- Controller List Name
|
|
VAV_2_OA_Equipment; !- Outdoor Air Equipment List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
VAV_3_OA, !- Name
|
|
VAV_3_OA_Controllers, !- Controller List Name
|
|
VAV_3_OA_Equipment; !- Outdoor Air Equipment List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
VAV_5_OA, !- Name
|
|
VAV_5_OA_Controllers, !- Controller List Name
|
|
VAV_5_OA_Equipment; !- Outdoor Air Equipment List Name
|
|
|
|
OutdoorAir:NodeList,
|
|
VAV_1_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
VAV_2_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
VAV_3_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
VAV_5_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:Mixer,
|
|
VAV_1_OAMixing Box, !- Name
|
|
VAV_1_OA-VAV_1_CoolCNode,!- Mixed Air Node Name
|
|
VAV_1_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
VAV_1_OARelief Node, !- Relief Air Stream Node Name
|
|
VAV_1 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
VAV_2_OAMixing Box, !- Name
|
|
VAV_2_OA-VAV_2_CoolCNode,!- Mixed Air Node Name
|
|
VAV_2_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
VAV_2_OARelief Node, !- Relief Air Stream Node Name
|
|
VAV_2 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
VAV_3_OAMixing Box, !- Name
|
|
VAV_3_OA-VAV_3_CoolCNode,!- Mixed Air Node Name
|
|
VAV_3_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
VAV_3_OARelief Node, !- Relief Air Stream Node Name
|
|
VAV_3 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
VAV_5_OAMixing Box, !- Name
|
|
VAV_5_OA-VAV_5_CoolCNode,!- Mixed Air Node Name
|
|
VAV_5_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
VAV_5_OARelief Node, !- Relief Air Stream Node Name
|
|
VAV_5 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_1_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Fan Inlet Node Name
|
|
VAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_1_CoolC-VAV_1_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_1_HeatC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Fan Inlet Node Name
|
|
VAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_1_HeatC-VAV_1_FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_1_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Fan Inlet Node Name
|
|
VAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_1_OA-VAV_1_CoolCNode;!- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_2_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Fan Inlet Node Name
|
|
VAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_2_CoolC-VAV_2_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_2_HeatC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Fan Inlet Node Name
|
|
VAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_2_HeatC-VAV_2_FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_2_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Fan Inlet Node Name
|
|
VAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_2_OA-VAV_2_CoolCNode;!- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_3_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_3 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_3_HeatC-VAV_3_FanNode, !- Fan Inlet Node Name
|
|
VAV_3 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_3_CoolC-VAV_3_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_3_HeatC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_3 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_3_HeatC-VAV_3_FanNode, !- Fan Inlet Node Name
|
|
VAV_3 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_3_HeatC-VAV_3_FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_3_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_3 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_3_HeatC-VAV_3_FanNode, !- Fan Inlet Node Name
|
|
VAV_3 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_3_OA-VAV_3_CoolCNode;!- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_5_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_5 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_5_HeatC-VAV_5_FanNode, !- Fan Inlet Node Name
|
|
VAV_5 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_5_CoolC-VAV_5_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_5_HeatC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_5 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_5_HeatC-VAV_5_FanNode, !- Fan Inlet Node Name
|
|
VAV_5 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_5_HeatC-VAV_5_FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_5_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_5 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_5_HeatC-VAV_5_FanNode, !- Fan Inlet Node Name
|
|
VAV_5 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_5_OA-VAV_5_CoolCNode;!- Setpoint Node or NodeList Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
VAV_1, !- Name
|
|
VAV_1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
VAV_1 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
VAV_2, !- Name
|
|
VAV_2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
VAV_2 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
VAV_3, !- Name
|
|
VAV_3 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
VAV_3 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
VAV_5, !- Name
|
|
VAV_5 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
VAV_5 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
VAV_1 Supply Air Splitter, !- Name
|
|
VAV_1 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Core_bottom VAV Box Inlet Node Name, !- Outlet 1 Node Name
|
|
Perimeter_bot_ZN_3 VAV Box Inlet Node Name, !- Outlet 2 Node Name
|
|
Perimeter_bot_ZN_2 VAV Box Inlet Node Name, !- Outlet 3 Node Name
|
|
Perimeter_bot_ZN_1 VAV Box Inlet Node Name, !- Outlet 4 Node Name
|
|
Perimeter_bot_ZN_4 VAV Box Inlet Node Name; !- Outlet 5 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
VAV_2 Supply Air Splitter, !- Name
|
|
VAV_2 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Core_mid VAV Box Inlet Node Name, !- Outlet 1 Node Name
|
|
Perimeter_mid_ZN_3 VAV Box Inlet Node Name, !- Outlet 2 Node Name
|
|
Perimeter_mid_ZN_2 VAV Box Inlet Node Name, !- Outlet 3 Node Name
|
|
Perimeter_mid_ZN_1 VAV Box Inlet Node Name, !- Outlet 4 Node Name
|
|
Perimeter_mid_ZN_4 VAV Box Inlet Node Name; !- Outlet 5 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
VAV_3 Supply Air Splitter, !- Name
|
|
VAV_3 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Core_top VAV Box Inlet Node Name, !- Outlet 1 Node Name
|
|
Perimeter_top_ZN_3 VAV Box Inlet Node Name, !- Outlet 2 Node Name
|
|
Perimeter_top_ZN_2 VAV Box Inlet Node Name, !- Outlet 3 Node Name
|
|
Perimeter_top_ZN_1 VAV Box Inlet Node Name, !- Outlet 4 Node Name
|
|
Perimeter_top_ZN_4 VAV Box Inlet Node Name; !- Outlet 5 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
VAV_5 Supply Air Splitter, !- Name
|
|
VAV_5 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Basement VAV Box Inlet Node Name; !- Outlet 1 Node Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
VAV_1 Return Air Path, !- Name
|
|
VAV_1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type
|
|
VAV_1 Return Plenum, !- Component 1 Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 2 Object Type
|
|
VAV_1 Return Air Mixer; !- Component 2 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
VAV_2 Return Air Path, !- Name
|
|
VAV_2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type
|
|
VAV_2 Return Plenum, !- Component 1 Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 2 Object Type
|
|
VAV_2 Return Air Mixer; !- Component 2 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
VAV_3 Return Air Path, !- Name
|
|
VAV_3 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type
|
|
VAV_3 Return Plenum, !- Component 1 Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 2 Object Type
|
|
VAV_3 Return Air Mixer; !- Component 2 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
VAV_5 Return Air Path, !- Name
|
|
VAV_5 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
VAV_5 Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ReturnPlenum,
|
|
VAV_2 Return Plenum, !- Name
|
|
MidFloor_Plenum, !- Zone Name
|
|
MIDFLOOR_PLENUMPlenumNode, !- Zone Node Name
|
|
MIDFLOOR_PLENUMPlenumOutletNode, !- Outlet Node Name
|
|
, !- Induced Air Outlet Node or NodeList Name
|
|
Core_mid Return Air Node Name, !- Inlet 1 Node Name
|
|
Perimeter_mid_ZN_3 Return Air Node Name, !- Inlet 2 Node Name
|
|
Perimeter_mid_ZN_2 Return Air Node Name, !- Inlet 3 Node Name
|
|
Perimeter_mid_ZN_1 Return Air Node Name, !- Inlet 4 Node Name
|
|
Perimeter_mid_ZN_4 Return Air Node Name; !- Inlet 5 Node Name
|
|
|
|
AirLoopHVAC:ReturnPlenum,
|
|
VAV_1 Return Plenum, !- Name
|
|
GroundFloor_Plenum, !- Zone Name
|
|
GROUNDFLOOR_PLENUMPlenumNode, !- Zone Node Name
|
|
GROUNDFLOOR_PLENUMPlenumOutletNode, !- Outlet Node Name
|
|
, !- Induced Air Outlet Node or NodeList Name
|
|
Core_bottom Return Air Node Name, !- Inlet 1 Node Name
|
|
Perimeter_bot_ZN_3 Return Air Node Name, !- Inlet 2 Node Name
|
|
Perimeter_bot_ZN_2 Return Air Node Name, !- Inlet 3 Node Name
|
|
Perimeter_bot_ZN_1 Return Air Node Name, !- Inlet 4 Node Name
|
|
Perimeter_bot_ZN_4 Return Air Node Name; !- Inlet 5 Node Name
|
|
|
|
AirLoopHVAC:ReturnPlenum,
|
|
VAV_3 Return Plenum, !- Name
|
|
TopFloor_Plenum, !- Zone Name
|
|
TOPFLOOR_PLENUMPlenumNode, !- Zone Node Name
|
|
TOPFLOOR_PLENUMPlenumOutletNode, !- Outlet Node Name
|
|
, !- Induced Air Outlet Node or NodeList Name
|
|
Core_top Return Air Node Name, !- Inlet 1 Node Name
|
|
Perimeter_top_ZN_3 Return Air Node Name, !- Inlet 2 Node Name
|
|
Perimeter_top_ZN_2 Return Air Node Name, !- Inlet 3 Node Name
|
|
Perimeter_top_ZN_1 Return Air Node Name, !- Inlet 4 Node Name
|
|
Perimeter_top_ZN_4 Return Air Node Name; !- Inlet 5 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
VAV_1 Return Air Mixer, !- Name
|
|
VAV_1 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
GROUNDFLOOR_PLENUMPlenumOutletNode; !- Inlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
VAV_2 Return Air Mixer, !- Name
|
|
VAV_2 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
MIDFLOOR_PLENUMPlenumOutletNode; !- Inlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
VAV_3 Return Air Mixer, !- Name
|
|
VAV_3 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
TOPFLOOR_PLENUMPlenumOutletNode; !- Inlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
VAV_5 Return Air Mixer, !- Name
|
|
VAV_5 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
Basement Return Air Node Name; !- Inlet 1 Node Name
|
|
|
|
! ***SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,26.7, !- Field 3
|
|
Until: 22:00,24.0, !- Field 5
|
|
Until: 24:00,26.7, !- Field 7
|
|
For: Saturday, !- Field 9
|
|
Until: 06:00,26.7, !- Field 10
|
|
Until: 18:00,24.0, !- Field 12
|
|
Until: 24:00,26.7, !- Field 14
|
|
For WinterDesignDay, !- Field 16
|
|
Until: 24:00,26.7, !- Field 17
|
|
For: AllOtherDays, !- Field 19
|
|
Until: 24:00,26.7; !- Field 20
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 06:00,15.6, !- Field 3
|
|
Until: 22:00,21.0, !- Field 5
|
|
Until: 24:00,15.6, !- Field 7
|
|
For SummerDesignDay, !- Field 9
|
|
Until: 24:00,15.6, !- Field 10
|
|
For: Saturday, !- Field 12
|
|
Until: 06:00,15.6, !- Field 13
|
|
Until: 18:00,21.0, !- Field 15
|
|
Until: 24:00,15.6, !- Field 17
|
|
For: WinterDesignDay, !- Field 19
|
|
Until: 24:00,21.0, !- Field 20
|
|
For: AllOtherDays, !- Field 22
|
|
Until: 24:00,15.6; !- Field 23
|
|
|
|
Schedule:Compact,
|
|
Seasonal-Reset-Supply-Air-Temp-Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,12.8; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
MinOA_MotorizedDamper_Sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 07:00,0.0, !- Field 3
|
|
Until: 22:00,1.0, !- Field 5
|
|
Until: 24:00,0.0, !- Field 7
|
|
For: Saturday WinterDesignDay, !- Field 9
|
|
Until: 07:00,0.0, !- Field 10
|
|
Until: 18:00,1.0, !- Field 12
|
|
Until: 24:00,0.0, !- Field 14
|
|
For: AllOtherDays, !- Field 16
|
|
Until: 24:00,0.0; !- Field 17
|
|
|
|
Schedule:Compact,
|
|
Dual Zone Control Type Sched, !- Name
|
|
Control Type, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,4; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HVACOperationSchd, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,0.0, !- Field 3
|
|
Until: 22:00,1.0, !- Field 5
|
|
Until: 24:00,0.0, !- Field 7
|
|
For: Saturday WinterDesignDay, !- Field 9
|
|
Until: 06:00,0.0, !- Field 10
|
|
Until: 18:00,1.0, !- Field 12
|
|
Until: 24:00,0.0, !- Field 14
|
|
For: AllOtherDays, !- Field 16
|
|
Until: 24:00,0.0; !- Field 17
|
|
|
|
! ***EQUIPMENT***
|
|
|
|
Output:PreprocessorMessage,
|
|
Conversion 7.2 => 8.0, !- Preprocessor Name
|
|
Warning, !- Error Severity
|
|
Boiler:HotWater="HeatSys1 Boiler", !- Message Line 1
|
|
defaults for this object have changed. Results may be different than previous. See, !- Message Line 2
|
|
InputOutputReference document for details.; !- Message Line 3
|
|
|
|
Boiler:HotWater,
|
|
HeatSys1 Boiler, !- Name
|
|
NATURALGAS, !- Fuel Type
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
0.78, !- Nominal Thermal Efficiency
|
|
LeavingBoiler, !- Efficiency Curve Temperature Evaluation Variable
|
|
, !- Normalized Boiler Efficiency Curve Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Part Load Ratio
|
|
1.2, !- Maximum Part Load Ratio
|
|
1.0, !- Optimum Part Load Ratio
|
|
HeatSys1 Pump-HeatSys1 BoilerNode, !- Boiler Water Inlet Node Name
|
|
HeatSys1 Supply Equipment Outlet Node, !- Boiler Water Outlet Node Name
|
|
95.0, !- Water Outlet Upper Temperature Limit {C}
|
|
LeavingSetpointModulated,!- Boiler Flow Mode
|
|
0.0000, !- Parasitic Electric Load {W}
|
|
1.0000; !- Sizing Factor
|
|
|
|
SetpointManager:Scheduled,
|
|
HeatSys1 Boiler Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
HW-Loop-Temp-Schedule, !- Schedule Name
|
|
HeatSys1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
Output:PreprocessorMessage,
|
|
Conversion 7.2 => 8.0, !- Preprocessor Name
|
|
Warning, !- Error Severity
|
|
Chiller:Electric:ReformulatedEIR="CoolSys1 Chiller 1", !- Message Line 1
|
|
defaults for this object have changed. See InputOutputReference document for details.; !- Message Line 2
|
|
|
|
Chiller:Electric:ReformulatedEIR,
|
|
CoolSys1 Chiller 1, !- Name
|
|
AUTOSIZE, !- Reference Capacity {W}
|
|
5.5, !- Reference COP {W/W}
|
|
6.67, !- Reference Leaving Chilled Water Temperature {C}
|
|
35, !- Reference Leaving Condenser Water Temperature {C}
|
|
AutoSize, !- Reference Chilled Water Flow Rate {m3/s}
|
|
AutoSize, !- Reference Condenser Water Flow Rate {m3/s}
|
|
WC Screw Default 90.1-2004 Cap_fT, !- Cooling Capacity Function of Temperature Curve Name
|
|
WC Screw Default 90.1-2004 EIR_fT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
|
|
LeavingCondenserWaterTemperature, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Type
|
|
WC Screw GTE 300tons Default 90.1-2004 EIR_fPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
|
|
0.1, !- Minimum Part Load Ratio
|
|
1, !- Maximum Part Load Ratio
|
|
1, !- Optimum Part Load Ratio
|
|
0.2, !- Minimum Unloading Ratio
|
|
CoolSys1 Pump-CoolSys1 ChillerNode 1, !- Chilled Water Inlet Node Name
|
|
CoolSys1 Supply Equipment Outlet Node 1, !- Chilled Water Outlet Node Name
|
|
CoolSys1 Chiller Water Inlet Node 1, !- Condenser Inlet Node Name
|
|
CoolSys1 Chiller Water Outlet Node 1, !- Condenser Outlet Node Name
|
|
1, !- Fraction of Compressor Electric Consumption Rejected by Condenser
|
|
2, !- Leaving Chilled Water Lower Temperature Limit {C}
|
|
LeavingSetpointModulated,!- Chiller Flow Mode Type
|
|
, !- Design Heat Recovery Water Flow Rate {m3/s}
|
|
, !- Heat Recovery Inlet Node Name
|
|
, !- Heat Recovery Outlet Node Name
|
|
0.4; !- Sizing Factor
|
|
|
|
SetpointManager:Scheduled,
|
|
CoolSys1 Chiller 1 Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CW-Loop-Temp-Schedule, !- Schedule Name
|
|
CoolSys1 Supply Equipment Outlet Node 1; !- Setpoint Node or NodeList Name
|
|
|
|
Output:PreprocessorMessage,
|
|
Conversion 7.2 => 8.0, !- Preprocessor Name
|
|
Warning, !- Error Severity
|
|
Chiller:Electric:ReformulatedEIR="CoolSys1 Chiller 2", !- Message Line 1
|
|
defaults for this object have changed. See InputOutputReference document for details.; !- Message Line 2
|
|
|
|
Chiller:Electric:ReformulatedEIR,
|
|
CoolSys1 Chiller 2, !- Name
|
|
AUTOSIZE, !- Reference Capacity {W}
|
|
5.5, !- Reference COP {W/W}
|
|
6.67, !- Reference Leaving Chilled Water Temperature {C}
|
|
35, !- Reference Leaving Condenser Water Temperature {C}
|
|
AutoSize, !- Reference Chilled Water Flow Rate {m3/s}
|
|
AutoSize, !- Reference Condenser Water Flow Rate {m3/s}
|
|
WC Screw Default 90.1-2004 Cap_fT, !- Cooling Capacity Function of Temperature Curve Name
|
|
WC Screw Default 90.1-2004 EIR_fT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
|
|
LeavingCondenserWaterTemperature, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Type
|
|
WC Screw GTE 300tons Default 90.1-2004 EIR_fPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
|
|
0.1, !- Minimum Part Load Ratio
|
|
1, !- Maximum Part Load Ratio
|
|
1, !- Optimum Part Load Ratio
|
|
0.2, !- Minimum Unloading Ratio
|
|
CoolSys1 Pump-CoolSys1 ChillerNode 2, !- Chilled Water Inlet Node Name
|
|
CoolSys1 Supply Equipment Outlet Node 2, !- Chilled Water Outlet Node Name
|
|
CoolSys1 Chiller Water Inlet Node 2, !- Condenser Inlet Node Name
|
|
CoolSys1 Chiller Water Outlet Node 2, !- Condenser Outlet Node Name
|
|
1, !- Fraction of Compressor Electric Consumption Rejected by Condenser
|
|
2, !- Leaving Chilled Water Lower Temperature Limit {C}
|
|
LeavingSetpointModulated,!- Chiller Flow Mode Type
|
|
, !- Design Heat Recovery Water Flow Rate {m3/s}
|
|
, !- Heat Recovery Inlet Node Name
|
|
, !- Heat Recovery Outlet Node Name
|
|
0.4; !- Sizing Factor
|
|
|
|
SetpointManager:Scheduled,
|
|
CoolSys1 Chiller 2 Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CW-Loop-Temp-Schedule, !- Schedule Name
|
|
CoolSys1 Supply Equipment Outlet Node 2; !- Setpoint Node or NodeList Name
|
|
|
|
CoolingTower:SingleSpeed,
|
|
TowerWaterSys CoolTower, !- Name
|
|
TowerWaterSys Pump-TowerWaterSys CoolTowerNode, !- Water Inlet Node Name
|
|
TowerWaterSys Supply Equipment Outlet Node, !- Water Outlet Node Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Fan Power {W}
|
|
AUTOSIZE, !- Design U-Factor Times Area Value {W/K}
|
|
autocalculate, !- Free Convection Regime Air Flow Rate {m3/s}
|
|
, !- Free Convection Regime Air Flow Rate Sizing Factor
|
|
autocalculate, !- Free Convection Regime U-Factor Times Area Value {W/K}
|
|
, !- Free Convection U-Factor Times Area Value Sizing Factor
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
, !- Heat Rejection Capacity and Nominal Capacity Sizing Ratio
|
|
, !- Nominal Capacity {W}
|
|
, !- Free Convection Capacity {W}
|
|
, !- Free Convection Nominal Capacity Sizing Factor
|
|
, !- Design Inlet Air Dry-Bulb Temperature {C}
|
|
, !- Design Inlet Air Wet-Bulb Temperature {C}
|
|
, !- Design Approach Temperature {deltaC}
|
|
, !- Design Range Temperature {deltaC}
|
|
, !- Basin Heater Capacity {W/K}
|
|
, !- Basin Heater Setpoint Temperature {C}
|
|
, !- Basin Heater Operating Schedule Name
|
|
SaturatedExit, !- Evaporation Loss Mode
|
|
, !- Evaporation Loss Factor {percent/K}
|
|
0.0080, !- Drift Loss Percent {percent}
|
|
ConcentrationRatio, !- Blowdown Calculation Mode
|
|
3.0000, !- Blowdown Concentration Ratio
|
|
, !- Blowdown Makeup Water Usage Schedule Name
|
|
, !- Supply Water Storage Tank Name
|
|
TowerWaterSys CoolTower OA ref Node, !- Outdoor Air Inlet Node Name
|
|
FanCycling, !- Capacity Control
|
|
, !- Number of Cells
|
|
, !- Cell Control
|
|
, !- Cell Minimum Water Flow Rate Fraction
|
|
, !- Cell Maximum Water Flow Rate Fraction
|
|
1.0000; !- Sizing Factor
|
|
|
|
Pump:VariableSpeed,
|
|
CoolSys1 Pump, !- Name
|
|
CoolSys1 Supply Inlet Node, !- Inlet Node Name
|
|
CoolSys1 Pump-CoolSys1 ChillerNodeviaConnector, !- Outlet Node Name
|
|
AUTOSIZE, !- Design Maximum Flow Rate {m3/s}
|
|
179352, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.9, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
0, !- Coefficient 1 of the Part Load Performance Curve
|
|
1, !- Coefficient 2 of the Part Load Performance Curve
|
|
0, !- Coefficient 3 of the Part Load Performance Curve
|
|
0, !- Coefficient 4 of the Part Load Performance Curve
|
|
0.0, !- Design Minimum Flow Rate {m3/s}
|
|
Intermittent, !- Pump Control Type
|
|
; !- Pump Flow Rate Schedule Name
|
|
|
|
Pump:VariableSpeed,
|
|
HeatSys1 Pump, !- Name
|
|
HeatSys1 Supply Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector, !- Outlet Node Name
|
|
AUTOSIZE, !- Design Maximum Flow Rate {m3/s}
|
|
179352, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.875, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
0, !- Coefficient 1 of the Part Load Performance Curve
|
|
1, !- Coefficient 2 of the Part Load Performance Curve
|
|
0, !- Coefficient 3 of the Part Load Performance Curve
|
|
0, !- Coefficient 4 of the Part Load Performance Curve
|
|
0.0, !- Design Minimum Flow Rate {m3/s}
|
|
Intermittent, !- Pump Control Type
|
|
; !- Pump Flow Rate Schedule Name
|
|
|
|
Pump:ConstantSpeed,
|
|
TowerWaterSys Pump, !- Name
|
|
TowerWaterSys Supply Inlet Node, !- Inlet Node Name
|
|
TowerWaterSys Pump-TowerWaterSys CoolTowerNodeviaConnector, !- Outlet Node Name
|
|
AUTOSIZE, !- Design Flow Rate {m3/s}
|
|
179352, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.87, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
Intermittent, !- Pump Control Type
|
|
; !- Pump Flow Rate Schedule Name
|
|
|
|
PlantEquipmentList,
|
|
CoolSys1 Equipment List, !- Name
|
|
Chiller:Electric:ReformulatedEIR, !- Equipment 1 Object Type
|
|
CoolSys1 Chiller 1, !- Equipment 1 Name
|
|
Chiller:Electric:ReformulatedEIR, !- Equipment 2 Object Type
|
|
CoolSys1 Chiller 2; !- Equipment 2 Name
|
|
|
|
PlantEquipmentList,
|
|
HeatSys1 Equipment List, !- Name
|
|
Boiler:HotWater, !- Equipment 1 Object Type
|
|
HeatSys1 Boiler; !- Equipment 1 Name
|
|
|
|
CondenserEquipmentList,
|
|
TowerWaterSys Equipment List, !- Name
|
|
CoolingTower:SingleSpeed,!- Equipment 1 Object Type
|
|
TowerWaterSys CoolTower; !- Equipment 1 Name
|
|
|
|
! ***SIZING & CONTROLS***
|
|
|
|
Sizing:Plant,
|
|
CoolSys1, !- Plant or Condenser Loop Name
|
|
Cooling, !- Loop Type
|
|
6.67, !- Design Loop Exit Temperature {C}
|
|
6.67; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
Sizing:Plant,
|
|
HeatSys1, !- Plant or Condenser Loop Name
|
|
Heating, !- Loop Type
|
|
82.2, !- Design Loop Exit Temperature {C}
|
|
11.1; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
Sizing:Plant,
|
|
TowerWaterSys, !- Plant or Condenser Loop Name
|
|
CONDENSER, !- Loop Type
|
|
29.4, !- Design Loop Exit Temperature {C}
|
|
5.6; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
Controller:WaterCoil,
|
|
VAV_1_CoolC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Reverse, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV_1_CoolC-VAV_1_HeatCNode, !- Sensor Node Name
|
|
VAV_1_CoolCDemand Inlet Node, !- Actuator Node Name
|
|
, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
VAV_1_HeatC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Normal, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Sensor Node Name
|
|
VAV_1_HeatCDemand Inlet Node, !- Actuator Node Name
|
|
0.0001, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
VAV_2_CoolC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Reverse, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV_2_CoolC-VAV_2_HeatCNode, !- Sensor Node Name
|
|
VAV_2_CoolCDemand Inlet Node, !- Actuator Node Name
|
|
, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
VAV_2_HeatC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Normal, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Sensor Node Name
|
|
VAV_2_HeatCDemand Inlet Node, !- Actuator Node Name
|
|
0.0001, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
VAV_3_CoolC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Reverse, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV_3_CoolC-VAV_3_HeatCNode, !- Sensor Node Name
|
|
VAV_3_CoolCDemand Inlet Node, !- Actuator Node Name
|
|
, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
VAV_3_HeatC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Normal, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV_3_HeatC-VAV_3_FanNode, !- Sensor Node Name
|
|
VAV_3_HeatCDemand Inlet Node, !- Actuator Node Name
|
|
0.0001, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
VAV_5_CoolC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Reverse, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV_5_CoolC-VAV_5_HeatCNode, !- Sensor Node Name
|
|
VAV_5_CoolCDemand Inlet Node, !- Actuator Node Name
|
|
, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
VAV_5_HeatC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Normal, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV_5_HeatC-VAV_5_FanNode, !- Sensor Node Name
|
|
VAV_5_HeatCDemand Inlet Node, !- Actuator Node Name
|
|
0.0001, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
! Curve adapted by R. Lord for ANSI/ASHRAE/IESNA 90.1-2004 performance
|
|
! for a water-cooled, screw/scroll chiller
|
|
|
|
Curve:Biquadratic,
|
|
WC Screw Default 90.1-2004 Cap_fT, !- Name
|
|
0.9061150, !- Coefficient1 Constant
|
|
0.0292277, !- Coefficient2 x
|
|
-0.0003647, !- Coefficient3 x**2
|
|
-0.0009709, !- Coefficient4 y
|
|
-0.0000905, !- Coefficient5 y**2
|
|
0.0002527, !- Coefficient6 x*y
|
|
0.0, !- Minimum Value of x
|
|
20.0, !- Maximum Value of x
|
|
0.0, !- Minimum Value of y
|
|
50.0; !- Maximum Value of y
|
|
|
|
! Curve adapted by R. Lord for ANSI/ASHRAE/IESNA 90.1-2004 performance
|
|
! for a water-cooled, screw/scroll chiller
|
|
|
|
Curve:Biquadratic,
|
|
WC Screw Default 90.1-2004 EIR_fT, !- Name
|
|
0.3617105, !- Coefficient1 Constant
|
|
-0.0229833, !- Coefficient2 x
|
|
-0.0009519, !- Coefficient3 x**2
|
|
0.0131889, !- Coefficient4 y
|
|
0.0003752, !- Coefficient5 y**2
|
|
-0.0007059, !- Coefficient6 x*y
|
|
0.0, !- Minimum Value of x
|
|
20.0, !- Maximum Value of x
|
|
0.0, !- Minimum Value of y
|
|
50.0; !- Maximum Value of y
|
|
|
|
SetpointManager:Scheduled,
|
|
CoolSys1 Loop Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CW-Loop-Temp-Schedule, !- Schedule Name
|
|
CoolSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:Scheduled,
|
|
HeatSys1 Loop Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
HW-Loop-Temp-Schedule, !- Schedule Name
|
|
HeatSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
PlantEquipmentOperationSchemes,
|
|
CoolSys1 Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:CoolingLoad, !- Control Scheme 1 Object Type
|
|
CoolSys1 Operation Scheme, !- Control Scheme 1 Name
|
|
ALWAYS_ON; !- Control Scheme 1 Schedule Name
|
|
|
|
PlantEquipmentOperationSchemes,
|
|
HeatSys1 Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type
|
|
HeatSys1 Operation Scheme, !- Control Scheme 1 Name
|
|
ALWAYS_ON; !- Control Scheme 1 Schedule Name
|
|
|
|
CondenserEquipmentOperationSchemes,
|
|
TowerWaterSys Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:CoolingLoad, !- Control Scheme 1 Object Type
|
|
TowerWaterSys Operation Scheme, !- Control Scheme 1 Name
|
|
ALWAYS_ON; !- Control Scheme 1 Schedule Name
|
|
|
|
PlantEquipmentOperation:HeatingLoad,
|
|
HeatSys1 Operation Scheme, !- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
1000000000000000, !- Load Range 1 Upper Limit {W}
|
|
HeatSys1 Equipment List; !- Range 1 Equipment List Name
|
|
|
|
PlantEquipmentOperation:CoolingLoad,
|
|
CoolSys1 Operation Scheme, !- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
100000000000000, !- Load Range 1 Upper Limit {W}
|
|
CoolSys1 Equipment List; !- Range 1 Equipment List Name
|
|
|
|
PlantEquipmentOperation:CoolingLoad,
|
|
TowerWaterSys Operation Scheme, !- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
1000000000000, !- Load Range 1 Upper Limit {W}
|
|
TowerWaterSys Equipment List; !- Range 1 Equipment List Name
|
|
|
|
! ***LOOPS***
|
|
|
|
PlantLoop,
|
|
CoolSys1, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
CoolSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
|
|
CoolSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
|
|
98.0, !- Maximum Loop Temperature {C}
|
|
1.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Plant Loop Volume {m3}
|
|
CoolSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
|
|
CoolSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
|
|
CoolSys1 Supply Branches,!- Plant Side Branch List Name
|
|
CoolSys1 Supply Connectors, !- Plant Side Connector List Name
|
|
CoolSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
CoolSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
CoolSys1 Demand Branches,!- Demand Side Branch List Name
|
|
CoolSys1 Demand Connectors, !- Demand Side Connector List Name
|
|
UniformLoad; !- Load Distribution Scheme
|
|
|
|
PlantLoop,
|
|
HeatSys1, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
HeatSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
|
|
HeatSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
|
|
100.0, !- Maximum Loop Temperature {C}
|
|
10.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Plant Loop Volume {m3}
|
|
HeatSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
|
|
HeatSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
|
|
HeatSys1 Supply Branches,!- Plant Side Branch List Name
|
|
HeatSys1 Supply Connectors, !- Plant Side Connector List Name
|
|
HeatSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
HeatSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
HeatSys1 Demand Branches,!- Demand Side Branch List Name
|
|
HeatSys1 Demand Connectors, !- Demand Side Connector List Name
|
|
Optimal; !- Load Distribution Scheme
|
|
|
|
CondenserLoop,
|
|
TowerWaterSys, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
TowerWaterSys Loop Operation Scheme List, !- Condenser Equipment Operation Scheme Name
|
|
TowerWaterSys Supply Outlet Node, !- Condenser Loop Temperature Setpoint Node Name
|
|
80.0, !- Maximum Loop Temperature {C}
|
|
5.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Condenser Loop Volume {m3}
|
|
TowerWaterSys Supply Inlet Node, !- Condenser Side Inlet Node Name
|
|
TowerWaterSys Supply Outlet Node, !- Condenser Side Outlet Node Name
|
|
TowerWaterSys Supply Branches, !- Condenser Side Branch List Name
|
|
TowerWaterSys Supply Connectors, !- Condenser Side Connector List Name
|
|
TowerWaterSys Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
TowerWaterSys Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
TowerWaterSys Demand Branches, !- Condenser Demand Side Branch List Name
|
|
TowerWaterSys Demand Connectors, !- Condenser Demand Side Connector List Name
|
|
SequentialLoad; !- Load Distribution Scheme
|
|
|
|
SetpointManager:FollowOutdoorAirTemperature,
|
|
TowerWaterSys, !- Name
|
|
Temperature, !- Control Variable
|
|
OutdoorAirWetBulb, !- Reference Temperature Type
|
|
0, !- Offset Temperature Difference {deltaC}
|
|
80.0, !- Maximum Setpoint Temperature {C}
|
|
5.0, !- Minimum Setpoint Temperature {C}
|
|
TowerWaterSys Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
! ***CONNECTIONS***
|
|
|
|
BranchList,
|
|
CoolSys1 Demand Branches,!- Name
|
|
CoolSys1 Demand Inlet Branch, !- Branch 1 Name
|
|
CoolSys1 Demand Load Branch 1, !- Branch 2 Name
|
|
CoolSys1 Demand Load Branch 2, !- Branch 3 Name
|
|
CoolSys1 Demand Load Branch 3, !- Branch 4 Name
|
|
CoolSys1 Demand Load Branch 4, !- Branch 5 Name
|
|
CoolSys1 Demand Bypass Branch, !- Branch 6 Name
|
|
CoolSys1 Demand Outlet Branch; !- Branch 7 Name
|
|
|
|
BranchList,
|
|
CoolSys1 Supply Branches,!- Name
|
|
CoolSys1 Supply Inlet Branch, !- Branch 1 Name
|
|
CoolSys1 Supply Equipment Branch 1, !- Branch 2 Name
|
|
CoolSys1 Supply Equipment Branch 2, !- Branch 3 Name
|
|
CoolSys1 Supply Equipment Bypass Branch, !- Branch 4 Name
|
|
CoolSys1 Supply Outlet Branch; !- Branch 5 Name
|
|
|
|
BranchList,
|
|
HeatSys1 Demand Branches,!- Name
|
|
HeatSys1 Demand Inlet Branch, !- Branch 1 Name
|
|
HeatSys1 Demand Load Branch 1, !- Branch 2 Name
|
|
HeatSys1 Demand Load Branch 2, !- Branch 3 Name
|
|
HeatSys1 Demand Load Branch 3, !- Branch 4 Name
|
|
HeatSys1 Demand Load Branch 4, !- Branch 5 Name
|
|
HeatSys1 Demand Load Branch 5, !- Branch 6 Name
|
|
HeatSys1 Demand Load Branch 6, !- Branch 7 Name
|
|
HeatSys1 Demand Load Branch 7, !- Branch 8 Name
|
|
HeatSys1 Demand Load Branch 8, !- Branch 9 Name
|
|
HeatSys1 Demand Load Branch 9, !- Branch 10 Name
|
|
HeatSys1 Demand Load Branch 10, !- Branch 11 Name
|
|
HeatSys1 Demand Load Branch 11, !- Branch 12 Name
|
|
HeatSys1 Demand Load Branch 12, !- Branch 13 Name
|
|
HeatSys1 Demand Load Branch 13, !- Branch 14 Name
|
|
HeatSys1 Demand Load Branch 14, !- Branch 15 Name
|
|
HeatSys1 Demand Load Branch 15, !- Branch 16 Name
|
|
HeatSys1 Demand Load Branch 16, !- Branch 17 Name
|
|
HeatSys1 Demand Load Branch 17, !- Branch 18 Name
|
|
HeatSys1 Demand Load Branch 18, !- Branch 19 Name
|
|
HeatSys1 Demand Load Branch 19, !- Branch 20 Name
|
|
HeatSys1 Demand Load Branch 20, !- Branch 21 Name
|
|
HeatSys1 Demand Bypass Branch, !- Branch 22 Name
|
|
HeatSys1 Demand Outlet Branch; !- Branch 23 Name
|
|
|
|
BranchList,
|
|
HeatSys1 Supply Branches,!- Name
|
|
HeatSys1 Supply Inlet Branch, !- Branch 1 Name
|
|
HeatSys1 Supply Equipment Branch, !- Branch 2 Name
|
|
HeatSys1 Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
HeatSys1 Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
BranchList,
|
|
TowerWaterSys Demand Branches, !- Name
|
|
TowerWaterSys Demand Inlet Branch, !- Branch 1 Name
|
|
TowerWaterSys Demand Load Branch 1, !- Branch 2 Name
|
|
TowerWaterSys Demand Load Branch 2, !- Branch 3 Name
|
|
TowerWaterSys Demand Bypass Branch, !- Branch 4 Name
|
|
TowerWaterSys Demand Outlet Branch; !- Branch 5 Name
|
|
|
|
BranchList,
|
|
TowerWaterSys Supply Branches, !- Name
|
|
TowerWaterSys Supply Inlet Branch, !- Branch 1 Name
|
|
TowerWaterSys Supply Equipment Branch, !- Branch 2 Name
|
|
TowerWaterSys Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
TowerWaterSys Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Demand Bypass Pipe, !- Component 1 Name
|
|
CoolSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
CoolSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Demand Inlet Pipe, !- Component 1 Name
|
|
CoolSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
CoolSys1 Demand Inlet Pipe-CoolSys1 Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
VAV_5_CoolC, !- Component 1 Name
|
|
VAV_5_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_5_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
VAV_1_CoolC, !- Component 1 Name
|
|
VAV_1_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_1_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 3, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
VAV_2_CoolC, !- Component 1 Name
|
|
VAV_2_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_2_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 4, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water, !- Component 1 Object Type
|
|
VAV_3_CoolC, !- Component 1 Name
|
|
VAV_3_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_3_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Demand Outlet Pipe, !- Component 1 Name
|
|
CoolSys1 Demand Mixer-CoolSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
CoolSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Equipment Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Chiller:Electric:ReformulatedEIR, !- Component 1 Object Type
|
|
CoolSys1 Chiller 1, !- Component 1 Name
|
|
CoolSys1 Pump-CoolSys1 ChillerNode 1, !- Component 1 Inlet Node Name
|
|
CoolSys1 Supply Equipment Outlet Node 1; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Equipment Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Chiller:Electric:ReformulatedEIR, !- Component 1 Object Type
|
|
CoolSys1 Chiller 2, !- Component 1 Name
|
|
CoolSys1 Pump-CoolSys1 ChillerNode 2, !- Component 1 Inlet Node Name
|
|
CoolSys1 Supply Equipment Outlet Node 2; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
CoolSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
CoolSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:VariableSpeed, !- Component 1 Object Type
|
|
CoolSys1 Pump, !- Component 1 Name
|
|
CoolSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
CoolSys1 Pump-CoolSys1 ChillerNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Supply Outlet Pipe, !- Component 1 Name
|
|
CoolSys1 Supply Mixer-CoolSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
CoolSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Demand Bypass Pipe, !- Component 1 Name
|
|
HeatSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Demand Inlet Pipe, !- Component 1 Name
|
|
HeatSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Basement VAV Box Reheat Coil, !- Component 1 Name
|
|
Basement VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Basement VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 10, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Perimeter_mid_ZN_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
Perimeter_mid_ZN_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_mid_ZN_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 11, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Perimeter_mid_ZN_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Perimeter_mid_ZN_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_mid_ZN_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 12, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Perimeter_mid_ZN_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
Perimeter_mid_ZN_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_mid_ZN_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 13, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Perimeter_top_ZN_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
Perimeter_top_ZN_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_top_ZN_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 14, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Perimeter_top_ZN_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
Perimeter_top_ZN_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_top_ZN_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 15, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Perimeter_top_ZN_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Perimeter_top_ZN_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_top_ZN_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 16, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Perimeter_top_ZN_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
Perimeter_top_ZN_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_top_ZN_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 17, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
VAV_5_HeatC, !- Component 1 Name
|
|
VAV_5_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_5_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 18, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
VAV_1_HeatC, !- Component 1 Name
|
|
VAV_1_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_1_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 19, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
VAV_2_HeatC, !- Component 1 Name
|
|
VAV_2_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_2_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Core_bottom VAV Box Reheat Coil, !- Component 1 Name
|
|
Core_bottom VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Core_bottom VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 20, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
VAV_3_HeatC, !- Component 1 Name
|
|
VAV_3_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_3_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 3, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Core_mid VAV Box Reheat Coil, !- Component 1 Name
|
|
Core_mid VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Core_mid VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 4, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Core_top VAV Box Reheat Coil, !- Component 1 Name
|
|
Core_top VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Core_top VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 5, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Perimeter_bot_ZN_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
Perimeter_bot_ZN_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_bot_ZN_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 6, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Perimeter_bot_ZN_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
Perimeter_bot_ZN_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_bot_ZN_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 7, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Perimeter_bot_ZN_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Perimeter_bot_ZN_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_bot_ZN_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 8, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Perimeter_bot_ZN_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
Perimeter_bot_ZN_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_bot_ZN_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 9, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Perimeter_mid_ZN_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
Perimeter_mid_ZN_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Perimeter_mid_ZN_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Demand Outlet Pipe, !- Component 1 Name
|
|
HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
HeatSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Boiler:HotWater, !- Component 1 Object Type
|
|
HeatSys1 Boiler, !- Component 1 Name
|
|
HeatSys1 Pump-HeatSys1 BoilerNode, !- Component 1 Inlet Node Name
|
|
HeatSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
HeatSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:VariableSpeed, !- Component 1 Object Type
|
|
HeatSys1 Pump, !- Component 1 Name
|
|
HeatSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Supply Outlet Pipe, !- Component 1 Name
|
|
HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
HeatSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
TowerWaterSys Demand Bypass Pipe, !- Component 1 Name
|
|
TowerWaterSys Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
TowerWaterSys Demand Inlet Pipe, !- Component 1 Name
|
|
TowerWaterSys Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Demand Inlet Pipe-TowerWaterSys Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Chiller:Electric:ReformulatedEIR, !- Component 1 Object Type
|
|
CoolSys1 Chiller 1, !- Component 1 Name
|
|
CoolSys1 Chiller Water Inlet Node 1, !- Component 1 Inlet Node Name
|
|
CoolSys1 Chiller Water Outlet Node 1; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Chiller:Electric:ReformulatedEIR, !- Component 1 Object Type
|
|
CoolSys1 Chiller 2, !- Component 1 Name
|
|
CoolSys1 Chiller Water Inlet Node 2, !- Component 1 Inlet Node Name
|
|
CoolSys1 Chiller Water Outlet Node 2; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
TowerWaterSys Demand Outlet Pipe, !- Component 1 Name
|
|
TowerWaterSys Demand Mixer-TowerWaterSys Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
CoolingTower:SingleSpeed,!- Component 1 Object Type
|
|
TowerWaterSys CoolTower, !- Component 1 Name
|
|
TowerWaterSys Pump-TowerWaterSys CoolTowerNode, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
TowerWaterSys Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
TowerWaterSys Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:ConstantSpeed, !- Component 1 Object Type
|
|
TowerWaterSys Pump, !- Component 1 Name
|
|
TowerWaterSys Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Pump-TowerWaterSys CoolTowerNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
TowerWaterSys Supply Outlet Pipe, !- Component 1 Name
|
|
TowerWaterSys Supply Mixer-TowerWaterSys Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
OutdoorAir:Node,
|
|
TowerWaterSys CoolTower OA ref Node; !- Name
|
|
|
|
ConnectorList,
|
|
CoolSys1 Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
CoolSys1 Demand Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
CoolSys1 Demand Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
CoolSys1 Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
CoolSys1 Supply Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
CoolSys1 Supply Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
HeatSys1 Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
HeatSys1 Demand Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
HeatSys1 Demand Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
HeatSys1 Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
HeatSys1 Supply Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
HeatSys1 Supply Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
TowerWaterSys Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
TowerWaterSys Demand Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
TowerWaterSys Demand Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
TowerWaterSys Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
TowerWaterSys Supply Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
TowerWaterSys Supply Mixer; !- Connector 2 Name
|
|
|
|
Connector:Splitter,
|
|
CoolSys1 Demand Splitter,!- Name
|
|
CoolSys1 Demand Inlet Branch, !- Inlet Branch Name
|
|
CoolSys1 Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
CoolSys1 Demand Load Branch 2, !- Outlet Branch 2 Name
|
|
CoolSys1 Demand Load Branch 3, !- Outlet Branch 3 Name
|
|
CoolSys1 Demand Load Branch 4, !- Outlet Branch 4 Name
|
|
CoolSys1 Demand Bypass Branch; !- Outlet Branch 5 Name
|
|
|
|
Connector:Splitter,
|
|
CoolSys1 Supply Splitter,!- Name
|
|
CoolSys1 Supply Inlet Branch, !- Inlet Branch Name
|
|
CoolSys1 Supply Equipment Branch 1, !- Outlet Branch 1 Name
|
|
CoolSys1 Supply Equipment Branch 2, !- Outlet Branch 2 Name
|
|
CoolSys1 Supply Equipment Bypass Branch; !- Outlet Branch 3 Name
|
|
|
|
Connector:Splitter,
|
|
HeatSys1 Demand Splitter,!- Name
|
|
HeatSys1 Demand Inlet Branch, !- Inlet Branch Name
|
|
HeatSys1 Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
HeatSys1 Demand Load Branch 2, !- Outlet Branch 2 Name
|
|
HeatSys1 Demand Load Branch 3, !- Outlet Branch 3 Name
|
|
HeatSys1 Demand Load Branch 4, !- Outlet Branch 4 Name
|
|
HeatSys1 Demand Load Branch 5, !- Outlet Branch 5 Name
|
|
HeatSys1 Demand Load Branch 6, !- Outlet Branch 6 Name
|
|
HeatSys1 Demand Load Branch 7, !- Outlet Branch 7 Name
|
|
HeatSys1 Demand Load Branch 8, !- Outlet Branch 8 Name
|
|
HeatSys1 Demand Load Branch 9, !- Outlet Branch 9 Name
|
|
HeatSys1 Demand Load Branch 10, !- Outlet Branch 10 Name
|
|
HeatSys1 Demand Load Branch 11, !- Outlet Branch 11 Name
|
|
HeatSys1 Demand Load Branch 12, !- Outlet Branch 12 Name
|
|
HeatSys1 Demand Load Branch 13, !- Outlet Branch 13 Name
|
|
HeatSys1 Demand Load Branch 14, !- Outlet Branch 14 Name
|
|
HeatSys1 Demand Load Branch 15, !- Outlet Branch 15 Name
|
|
HeatSys1 Demand Load Branch 16, !- Outlet Branch 16 Name
|
|
HeatSys1 Demand Load Branch 17, !- Outlet Branch 17 Name
|
|
HeatSys1 Demand Load Branch 18, !- Outlet Branch 18 Name
|
|
HeatSys1 Demand Load Branch 19, !- Outlet Branch 19 Name
|
|
HeatSys1 Demand Load Branch 20, !- Outlet Branch 20 Name
|
|
HeatSys1 Demand Bypass Branch; !- Outlet Branch 21 Name
|
|
|
|
Connector:Splitter,
|
|
HeatSys1 Supply Splitter,!- Name
|
|
HeatSys1 Supply Inlet Branch, !- Inlet Branch Name
|
|
HeatSys1 Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
HeatSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Splitter,
|
|
TowerWaterSys Demand Splitter, !- Name
|
|
TowerWaterSys Demand Inlet Branch, !- Inlet Branch Name
|
|
TowerWaterSys Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
TowerWaterSys Demand Load Branch 2, !- Outlet Branch 2 Name
|
|
TowerWaterSys Demand Bypass Branch; !- Outlet Branch 3 Name
|
|
|
|
Connector:Splitter,
|
|
TowerWaterSys Supply Splitter, !- Name
|
|
TowerWaterSys Supply Inlet Branch, !- Inlet Branch Name
|
|
TowerWaterSys Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
TowerWaterSys Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
CoolSys1 Demand Mixer, !- Name
|
|
CoolSys1 Demand Outlet Branch, !- Outlet Branch Name
|
|
CoolSys1 Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
CoolSys1 Demand Load Branch 2, !- Inlet Branch 2 Name
|
|
CoolSys1 Demand Load Branch 3, !- Inlet Branch 3 Name
|
|
CoolSys1 Demand Load Branch 4, !- Inlet Branch 4 Name
|
|
CoolSys1 Demand Bypass Branch; !- Inlet Branch 5 Name
|
|
|
|
Connector:Mixer,
|
|
CoolSys1 Supply Mixer, !- Name
|
|
CoolSys1 Supply Outlet Branch, !- Outlet Branch Name
|
|
CoolSys1 Supply Equipment Branch 1, !- Inlet Branch 1 Name
|
|
CoolSys1 Supply Equipment Branch 2, !- Inlet Branch 2 Name
|
|
CoolSys1 Supply Equipment Bypass Branch; !- Inlet Branch 3 Name
|
|
|
|
Connector:Mixer,
|
|
HeatSys1 Demand Mixer, !- Name
|
|
HeatSys1 Demand Outlet Branch, !- Outlet Branch Name
|
|
HeatSys1 Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
HeatSys1 Demand Load Branch 2, !- Inlet Branch 2 Name
|
|
HeatSys1 Demand Load Branch 3, !- Inlet Branch 3 Name
|
|
HeatSys1 Demand Load Branch 4, !- Inlet Branch 4 Name
|
|
HeatSys1 Demand Load Branch 5, !- Inlet Branch 5 Name
|
|
HeatSys1 Demand Load Branch 6, !- Inlet Branch 6 Name
|
|
HeatSys1 Demand Load Branch 7, !- Inlet Branch 7 Name
|
|
HeatSys1 Demand Load Branch 8, !- Inlet Branch 8 Name
|
|
HeatSys1 Demand Load Branch 9, !- Inlet Branch 9 Name
|
|
HeatSys1 Demand Load Branch 10, !- Inlet Branch 10 Name
|
|
HeatSys1 Demand Load Branch 11, !- Inlet Branch 11 Name
|
|
HeatSys1 Demand Load Branch 12, !- Inlet Branch 12 Name
|
|
HeatSys1 Demand Load Branch 13, !- Inlet Branch 13 Name
|
|
HeatSys1 Demand Load Branch 14, !- Inlet Branch 14 Name
|
|
HeatSys1 Demand Load Branch 15, !- Inlet Branch 15 Name
|
|
HeatSys1 Demand Load Branch 16, !- Inlet Branch 16 Name
|
|
HeatSys1 Demand Load Branch 17, !- Inlet Branch 17 Name
|
|
HeatSys1 Demand Load Branch 18, !- Inlet Branch 18 Name
|
|
HeatSys1 Demand Load Branch 19, !- Inlet Branch 19 Name
|
|
HeatSys1 Demand Load Branch 20, !- Inlet Branch 20 Name
|
|
HeatSys1 Demand Bypass Branch; !- Inlet Branch 21 Name
|
|
|
|
Connector:Mixer,
|
|
HeatSys1 Supply Mixer, !- Name
|
|
HeatSys1 Supply Outlet Branch, !- Outlet Branch Name
|
|
HeatSys1 Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
HeatSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
TowerWaterSys Demand Mixer, !- Name
|
|
TowerWaterSys Demand Outlet Branch, !- Outlet Branch Name
|
|
TowerWaterSys Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
TowerWaterSys Demand Load Branch 2, !- Inlet Branch 2 Name
|
|
TowerWaterSys Demand Bypass Branch; !- Inlet Branch 3 Name
|
|
|
|
Connector:Mixer,
|
|
TowerWaterSys Supply Mixer, !- Name
|
|
TowerWaterSys Supply Outlet Branch, !- Outlet Branch Name
|
|
TowerWaterSys Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
TowerWaterSys Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Demand Bypass Pipe, !- Name
|
|
CoolSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
CoolSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Demand Inlet Pipe, !- Name
|
|
CoolSys1 Demand Inlet Node, !- Inlet Node Name
|
|
CoolSys1 Demand Inlet Pipe-CoolSys1 Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Demand Outlet Pipe, !- Name
|
|
CoolSys1 Demand Mixer-CoolSys1 Demand Outlet Pipe, !- Inlet Node Name
|
|
CoolSys1 Demand Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Supply Equipment Bypass Pipe, !- Name
|
|
CoolSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
CoolSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Supply Outlet Pipe, !- Name
|
|
CoolSys1 Supply Mixer-CoolSys1 Supply Outlet Pipe, !- Inlet Node Name
|
|
CoolSys1 Supply Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Demand Bypass Pipe, !- Name
|
|
HeatSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Demand Inlet Pipe, !- Name
|
|
HeatSys1 Demand Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Demand Outlet Pipe, !- Name
|
|
HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Inlet Node Name
|
|
HeatSys1 Demand Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Supply Equipment Bypass Pipe, !- Name
|
|
HeatSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Supply Outlet Pipe, !- Name
|
|
HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Inlet Node Name
|
|
HeatSys1 Supply Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
TowerWaterSys Demand Bypass Pipe, !- Name
|
|
TowerWaterSys Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
TowerWaterSys Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
TowerWaterSys Demand Inlet Pipe, !- Name
|
|
TowerWaterSys Demand Inlet Node, !- Inlet Node Name
|
|
TowerWaterSys Demand Inlet Pipe-TowerWaterSys Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
TowerWaterSys Demand Outlet Pipe, !- Name
|
|
TowerWaterSys Demand Mixer-TowerWaterSys Demand Outlet Pipe, !- Inlet Node Name
|
|
TowerWaterSys Demand Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
TowerWaterSys Supply Equipment Bypass Pipe, !- Name
|
|
TowerWaterSys Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
TowerWaterSys Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
TowerWaterSys Supply Outlet Pipe, !- Name
|
|
TowerWaterSys Supply Mixer-TowerWaterSys Supply Outlet Pipe, !- Inlet Node Name
|
|
TowerWaterSys Supply Outlet Node; !- Outlet Node Name
|
|
|
|
! ***SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
CW-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,6.7; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HW-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,82.2; !- Field 3
|
|
|
|
! ***SWH EQUIPMENT***
|
|
|
|
WaterHeater:Mixed,
|
|
SWHSys1 Water Heater, !- Name
|
|
0.7571, !- Tank Volume {m3}
|
|
SWHSys1 Water Heater Setpoint Temperature Schedule Name, !- Setpoint Temperature Schedule Name
|
|
2.0, !- Deadband Temperature Difference {deltaC}
|
|
82.2222, !- Maximum Temperature Limit {C}
|
|
Cycle, !- Heater Control Type
|
|
845000, !- Heater Maximum Capacity {W}
|
|
, !- Heater Minimum Capacity {W}
|
|
, !- Heater Ignition Minimum Flow Rate {m3/s}
|
|
, !- Heater Ignition Delay {s}
|
|
NATURALGAS, !- Heater Fuel Type
|
|
0.8, !- Heater Thermal Efficiency
|
|
, !- Part Load Factor Curve Name
|
|
20, !- Off Cycle Parasitic Fuel Consumption Rate {W}
|
|
NATURALGAS, !- Off Cycle Parasitic Fuel Type
|
|
0.8, !- Off Cycle Parasitic Heat Fraction to Tank
|
|
, !- On Cycle Parasitic Fuel Consumption Rate {W}
|
|
NATURALGAS, !- On Cycle Parasitic Fuel Type
|
|
, !- On Cycle Parasitic Heat Fraction to Tank
|
|
SCHEDULE, !- Ambient Temperature Indicator
|
|
SWHSys1 Water Heater Ambient Temperature Schedule Name, !- Ambient Temperature Schedule Name
|
|
, !- Ambient Temperature Zone Name
|
|
, !- Ambient Temperature Outdoor Air Node Name
|
|
6.0, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- Off Cycle Loss Fraction to Zone
|
|
6.0, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- On Cycle Loss Fraction to Zone
|
|
, !- Peak Use Flow Rate {m3/s}
|
|
, !- Use Flow Rate Fraction Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNode, !- Use Side Inlet Node Name
|
|
SWHSys1 Supply Equipment Outlet Node, !- Use Side Outlet Node Name
|
|
1.0, !- Use Side Effectiveness
|
|
, !- Source Side Inlet Node Name
|
|
, !- Source Side Outlet Node Name
|
|
1.0, !- Source Side Effectiveness
|
|
AUTOSIZE, !- Use Side Design Flow Rate {m3/s}
|
|
AUTOSIZE, !- Source Side Design Flow Rate {m3/s}
|
|
1.5; !- Indirect Water Heating Recovery Time {hr}
|
|
|
|
WaterUse:Equipment,
|
|
Core_bottom Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
2.24e-005, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Core_bottom, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Core_mid Water Equipment,!- Name
|
|
, !- End-Use Subcategory
|
|
2.24e-005, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Core_mid, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Core_top Water Equipment,!- Name
|
|
, !- End-Use Subcategory
|
|
2.24e-005, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Core_top, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
PlantEquipmentList,
|
|
SWHSys1 Equipment List, !- Name
|
|
WaterHeater:Mixed, !- Equipment 1 Object Type
|
|
SWHSys1 Water Heater; !- Equipment 1 Name
|
|
|
|
Pump:VariableSpeed,
|
|
SWHSys1 Pump, !- Name
|
|
SWHSys1 Supply Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNodeviaConnector, !- Outlet Node Name
|
|
AUTOSIZE, !- Design Maximum Flow Rate {m3/s}
|
|
179352, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.85, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
0, !- Coefficient 1 of the Part Load Performance Curve
|
|
1, !- Coefficient 2 of the Part Load Performance Curve
|
|
0, !- Coefficient 3 of the Part Load Performance Curve
|
|
0, !- Coefficient 4 of the Part Load Performance Curve
|
|
0.0, !- Design Minimum Flow Rate {m3/s}
|
|
Intermittent, !- Pump Control Type
|
|
; !- Pump Flow Rate Schedule Name
|
|
|
|
! ***SWH SIZING & CONTROLS***
|
|
|
|
Sizing:Plant,
|
|
SWHSys1, !- Plant or Condenser Loop Name
|
|
Heating, !- Loop Type
|
|
60, !- Design Loop Exit Temperature {C}
|
|
5.0; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
SetpointManager:Scheduled,
|
|
SWHSys1 Loop Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
SWHSys1-Loop-Temp-Schedule, !- Schedule Name
|
|
SWHSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
PlantEquipmentOperationSchemes,
|
|
SWHSys1 Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type
|
|
SWHSys1 Operation Scheme,!- Control Scheme 1 Name
|
|
ALWAYS_ON; !- Control Scheme 1 Schedule Name
|
|
|
|
PlantEquipmentOperation:HeatingLoad,
|
|
SWHSys1 Operation Scheme,!- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
1000000000000000, !- Load Range 1 Upper Limit {W}
|
|
SWHSys1 Equipment List; !- Range 1 Equipment List Name
|
|
|
|
! ***SWH LOOP***
|
|
|
|
PlantLoop,
|
|
SWHSys1, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
SWHSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
|
|
SWHSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
|
|
60.0, !- Maximum Loop Temperature {C}
|
|
10.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Plant Loop Volume {m3}
|
|
SWHSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
|
|
SWHSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
|
|
SWHSys1 Supply Branches, !- Plant Side Branch List Name
|
|
SWHSys1 Supply Connectors, !- Plant Side Connector List Name
|
|
SWHSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
SWHSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
SWHSys1 Demand Branches, !- Demand Side Branch List Name
|
|
SWHSys1 Demand Connectors, !- Demand Side Connector List Name
|
|
Optimal; !- Load Distribution Scheme
|
|
|
|
! ***SWH CONNECTIONS***
|
|
|
|
BranchList,
|
|
SWHSys1 Demand Branches, !- Name
|
|
SWHSys1 Demand Inlet Branch, !- Branch 1 Name
|
|
SWHSys1 Demand Load Branch 1, !- Branch 2 Name
|
|
SWHSys1 Demand Load Branch 2, !- Branch 3 Name
|
|
SWHSys1 Demand Load Branch 3, !- Branch 4 Name
|
|
SWHSys1 Demand Bypass Branch, !- Branch 5 Name
|
|
SWHSys1 Demand Outlet Branch; !- Branch 6 Name
|
|
|
|
BranchList,
|
|
SWHSys1 Supply Branches, !- Name
|
|
SWHSys1 Supply Inlet Branch, !- Branch 1 Name
|
|
SWHSys1 Supply Equipment Branch, !- Branch 2 Name
|
|
SWHSys1 Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
SWHSys1 Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Demand Bypass Pipe, !- Component 1 Name
|
|
SWHSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Demand Inlet Pipe, !- Component 1 Name
|
|
SWHSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Demand Inlet Pipe-SWHSys1 Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Core_bottom Water Equipment, !- Component 1 Name
|
|
Core_bottom Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Core_bottom Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Core_mid Water Equipment,!- Component 1 Name
|
|
Core_mid Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Core_mid Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 3, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Core_top Water Equipment,!- Component 1 Name
|
|
Core_top Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Core_top Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Demand Outlet Pipe, !- Component 1 Name
|
|
SWHSys1 Demand Mixer-SWHSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
SWHSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterHeater:Mixed, !- Component 1 Object Type
|
|
SWHSys1 Water Heater, !- Component 1 Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNode, !- Component 1 Inlet Node Name
|
|
SWHSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
SWHSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:VariableSpeed, !- Component 1 Object Type
|
|
SWHSys1 Pump, !- Component 1 Name
|
|
SWHSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Supply Outlet Pipe, !- Component 1 Name
|
|
SWHSys1 Supply Mixer-SWHSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
SWHSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
ConnectorList,
|
|
SWHSys1 Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
SWHSys1 Demand Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
SWHSys1 Demand Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
SWHSys1 Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
SWHSys1 Supply Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
SWHSys1 Supply Mixer; !- Connector 2 Name
|
|
|
|
WaterUse:Connections,
|
|
Core_bottom Water Equipment, !- Name
|
|
Core_bottom Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Core_bottom Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Core_bottom Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Core_mid Water Equipment,!- Name
|
|
Core_mid Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Core_mid Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Core_mid Water Equipment;!- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Core_top Water Equipment,!- Name
|
|
Core_top Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Core_top Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Core_top Water Equipment;!- Water Use Equipment 1 Name
|
|
|
|
Connector:Splitter,
|
|
SWHSys1 Demand Splitter, !- Name
|
|
SWHSys1 Demand Inlet Branch, !- Inlet Branch Name
|
|
SWHSys1 Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
SWHSys1 Demand Load Branch 2, !- Outlet Branch 2 Name
|
|
SWHSys1 Demand Load Branch 3, !- Outlet Branch 3 Name
|
|
SWHSys1 Demand Bypass Branch; !- Outlet Branch 4 Name
|
|
|
|
Connector:Splitter,
|
|
SWHSys1 Supply Splitter, !- Name
|
|
SWHSys1 Supply Inlet Branch, !- Inlet Branch Name
|
|
SWHSys1 Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
SWHSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
SWHSys1 Demand Mixer, !- Name
|
|
SWHSys1 Demand Outlet Branch, !- Outlet Branch Name
|
|
SWHSys1 Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
SWHSys1 Demand Load Branch 2, !- Inlet Branch 2 Name
|
|
SWHSys1 Demand Load Branch 3, !- Inlet Branch 3 Name
|
|
SWHSys1 Demand Bypass Branch; !- Inlet Branch 4 Name
|
|
|
|
Connector:Mixer,
|
|
SWHSys1 Supply Mixer, !- Name
|
|
SWHSys1 Supply Outlet Branch, !- Outlet Branch Name
|
|
SWHSys1 Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
SWHSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Demand Bypass Pipe, !- Name
|
|
SWHSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Demand Inlet Pipe, !- Name
|
|
SWHSys1 Demand Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Demand Inlet Pipe-SWHSys1 Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Demand Outlet Pipe, !- Name
|
|
SWHSys1 Demand Mixer-SWHSys1 Demand Outlet Pipe, !- Inlet Node Name
|
|
SWHSys1 Demand Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Supply Equipment Bypass Pipe, !- Name
|
|
SWHSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Supply Outlet Pipe, !- Name
|
|
SWHSys1 Supply Mixer-SWHSys1 Supply Outlet Pipe, !- Inlet Node Name
|
|
SWHSys1 Supply Outlet Node; !- Outlet Node Name
|
|
|
|
! ***SWH SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
BLDG_SWH_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 05:00,0.05, !- Field 3
|
|
Until: 06:00,0.08, !- Field 5
|
|
Until: 07:00,0.07, !- Field 7
|
|
Until: 08:00,0.19, !- Field 9
|
|
Until: 09:00,0.35, !- Field 11
|
|
Until: 10:00,0.38, !- Field 13
|
|
Until: 11:00,0.39, !- Field 15
|
|
Until: 12:00,0.47, !- Field 17
|
|
Until: 13:00,0.57, !- Field 19
|
|
Until: 14:00,0.54, !- Field 21
|
|
Until: 15:00,0.34, !- Field 23
|
|
Until: 16:00,0.33, !- Field 25
|
|
Until: 17:00,0.44, !- Field 27
|
|
Until: 18:00,0.26, !- Field 29
|
|
Until: 19:00,0.21, !- Field 31
|
|
Until: 20:00,0.15, !- Field 33
|
|
Until: 21:00,0.17, !- Field 35
|
|
Until: 22:00,0.08, !- Field 37
|
|
Until: 24:00,0.05, !- Field 39
|
|
For: Saturday WinterDesignDay, !- Field 41
|
|
Until: 05:00,0.05, !- Field 42
|
|
Until: 06:00,0.08, !- Field 44
|
|
Until: 07:00,0.07, !- Field 46
|
|
Until: 08:00,0.11, !- Field 48
|
|
Until: 09:00,0.15, !- Field 50
|
|
Until: 10:00,0.21, !- Field 52
|
|
Until: 11:00,0.19, !- Field 54
|
|
Until: 12:00,0.23, !- Field 56
|
|
Until: 13:00,0.20, !- Field 58
|
|
Until: 14:00,0.19, !- Field 60
|
|
Until: 15:00,0.15, !- Field 62
|
|
Until: 16:00,0.13, !- Field 64
|
|
Until: 17:00,0.14, !- Field 66
|
|
Until: 21:00,0.07, !- Field 68
|
|
Until: 22:00,0.09, !- Field 70
|
|
Until: 24:00,0.05, !- Field 72
|
|
For: AllOtherDays, !- Field 74
|
|
Until: 05:00,0.04, !- Field 75
|
|
Until: 06:00,0.07, !- Field 77
|
|
Until: 11:00,0.04, !- Field 79
|
|
Until: 13:00,0.06, !- Field 81
|
|
Until: 14:00,0.09, !- Field 83
|
|
Until: 15:00,0.06, !- Field 85
|
|
Until: 21:00,0.04, !- Field 87
|
|
Until: 22:00,0.07, !- Field 89
|
|
Until: 24:00,0.04; !- Field 91
|
|
|
|
Schedule:Compact,
|
|
Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
SWHSys1 Water Heater Ambient Temperature Schedule Name, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,22.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,43.3; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,43.3; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
SWHSys1 Water Heater Setpoint Temperature Schedule Name, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
SWHSys1-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
! ***ECONOMICS***
|
|
! IN_EIAMonthlyRateGas, Source EIA historical Nov2003 thru Oct2004
|
|
! Indiana 1999 state average electricity emissions factors based on eGRID, 1065, AirData
|
|
! PSI_CS_CommercialElectricService, source http://www.cinergypsi.com/pdfs/RateCS.pdf, effective 2004-05-24
|
|
! PSI_LLF_LowLoadFactorService,source http://www.cinergypsi.com/pdfs/RATELLF.pdf, effective 2004-05-24
|
|
|
|
UtilityCost:Tariff,
|
|
PSI_LLF_LowLoadFactorService, !- Name
|
|
Electricity:Facility, !- Output Meter Name
|
|
kWh, !- Conversion Factor Choice
|
|
, !- Energy Conversion Factor
|
|
, !- Demand Conversion Factor
|
|
, !- Time of Use Period Schedule Name
|
|
, !- Season Schedule Name
|
|
, !- Month Schedule Name
|
|
HalfHour, !- Demand Window Length
|
|
15.00, !- Monthly Charge or Variable Name
|
|
, !- Minimum Monthly Charge or Variable Name
|
|
, !- Real Time Pricing Charge Schedule Name
|
|
, !- Customer Baseline Load Schedule Name
|
|
Comm Elect; !- Group Name
|
|
|
|
UtilityCost:Charge:Block,
|
|
AnnualEnergyCharge, !- Utility Cost Charge Block Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
, !- Remaining Into Variable
|
|
, !- Block Size Multiplier Value or Variable Name
|
|
300, !- Block Size 1 Value or Variable Name
|
|
0.108222, !- Block 1 Cost per Unit Value or Variable Name
|
|
700, !- Block Size 2 Value or Variable Name
|
|
0.087021, !- Block 2 Cost per Unit Value or Variable Name
|
|
1500, !- Block Size 3 Value or Variable Name
|
|
0.078420, !- Block 3 Cost per Unit Value or Variable Name
|
|
remaining, !- Block Size 4 Value or Variable Name
|
|
0.058320; !- Block 4 Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Block,
|
|
AnnualDemandBaseCharge, !- Utility Cost Charge Block Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
, !- Remaining Into Variable
|
|
TotalDemand, !- Block Size Multiplier Value or Variable Name
|
|
190, !- Block Size 1 Value or Variable Name
|
|
0.0, !- Block 1 Cost per Unit Value or Variable Name
|
|
110, !- Block Size 2 Value or Variable Name
|
|
0.051773, !- Block 2 Cost per Unit Value or Variable Name
|
|
remaining, !- Block Size 3 Value or Variable Name
|
|
0.046965; !- Block 3 Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
FuelCostAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.002028; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
QualPollutionControlAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000536; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
SoxNoxRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.001127; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
DSMRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000370; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
PurchPowerTrackerAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000031; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
MidwestISOAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000216; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
CleanCoalRiderEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000833; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Qualify,
|
|
MinDemand75kw, !- Utility Cost Qualify Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
TotalDemand, !- Variable Name
|
|
Minimum, !- Qualify Type
|
|
75, !- Threshold Value or Variable Name
|
|
Annual, !- Season
|
|
Count, !- Threshold Test
|
|
12; !- Number of Months
|
|
|
|
UtilityCost:Charge:Simple,
|
|
TaxofeightPercent, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
SubTotal, !- Source Variable
|
|
Annual, !- Season
|
|
Taxes, !- Category Variable Name
|
|
0.08; !- Cost per Unit Value or Variable Name
|
|
|
|
!end PSI_LLF_LowLoadFactorService
|
|
|
|
UtilityCost:Tariff,
|
|
PSI_CS_CommercialElectricService, !- Name
|
|
Electricity:Facility, !- Output Meter Name
|
|
kWh, !- Conversion Factor Choice
|
|
, !- Energy Conversion Factor
|
|
, !- Demand Conversion Factor
|
|
, !- Time of Use Period Schedule Name
|
|
, !- Season Schedule Name
|
|
, !- Month Schedule Name
|
|
, !- Demand Window Length
|
|
9.40, !- Monthly Charge or Variable Name
|
|
, !- Minimum Monthly Charge or Variable Name
|
|
, !- Real Time Pricing Charge Schedule Name
|
|
, !- Customer Baseline Load Schedule Name
|
|
Comm Elect; !- Group Name
|
|
|
|
UtilityCost:Charge:Block,
|
|
AnnualEnergyCharge, !- Utility Cost Charge Block Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
, !- Remaining Into Variable
|
|
, !- Block Size Multiplier Value or Variable Name
|
|
300, !- Block Size 1 Value or Variable Name
|
|
0.082409, !- Block 1 Cost per Unit Value or Variable Name
|
|
700, !- Block Size 2 Value or Variable Name
|
|
0.072873, !- Block 2 Cost per Unit Value or Variable Name
|
|
1500, !- Block Size 3 Value or Variable Name
|
|
0.061696, !- Block 3 Cost per Unit Value or Variable Name
|
|
remaining, !- Block Size 4 Value or Variable Name
|
|
0.041179; !- Block 4 Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
FuelCostAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.002028; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
QualPollutionControlAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000536; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
SoxNoxRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.001127; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
DSMRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000021; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
PurchPowerTrackerAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000034; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
MidwestISOAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000203; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
CleanCoalRiderEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000807; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Qualify,
|
|
MaxDemand75kw, !- Utility Cost Qualify Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
TotalDemand, !- Variable Name
|
|
Maximum, !- Qualify Type
|
|
75, !- Threshold Value or Variable Name
|
|
Annual, !- Season
|
|
Count, !- Threshold Test
|
|
1; !- Number of Months
|
|
|
|
UtilityCost:Charge:Simple,
|
|
TaxofeightPercent, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
SubTotal, !- Source Variable
|
|
Annual, !- Season
|
|
Taxes, !- Category Variable Name
|
|
0.08; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Tariff,
|
|
IN_EIAMonthlyRateGas, !- Name
|
|
NaturalGas:Facility, !- Output Meter Name
|
|
MCF, !- Conversion Factor Choice
|
|
, !- Energy Conversion Factor
|
|
, !- Demand Conversion Factor
|
|
, !- Time of Use Period Schedule Name
|
|
, !- Season Schedule Name
|
|
, !- Month Schedule Name
|
|
, !- Demand Window Length
|
|
0.0, !- Monthly Charge or Variable Name
|
|
, !- Minimum Monthly Charge or Variable Name
|
|
, !- Real Time Pricing Charge Schedule Name
|
|
, !- Customer Baseline Load Schedule Name
|
|
Comm Gas; !- Group Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
MonthlyRateGasCharge, !- Utility Cost Charge Simple Name
|
|
IN_EIAMonthlyRateGas, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
IN_MonthlyGasRates; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Variable,
|
|
IN_MonthlyGasRates, !- Name
|
|
IN_EIAMonthlyRateGas, !- Tariff Name
|
|
Currency, !- Variable Type
|
|
8.22, !- January Value
|
|
7.51, !- February Value
|
|
8.97, !- March Value
|
|
9.01, !- April Value
|
|
9.16, !- May Value
|
|
10.44, !- June Value
|
|
10.32, !- July Value
|
|
10.13, !- August Value
|
|
9.20, !- September Value
|
|
8.18, !- October Value
|
|
7.83, !- November Value
|
|
7.63; !- December Value
|
|
|
|
UtilityCost:Charge:Simple,
|
|
TaxofEightPercent, !- Utility Cost Charge Simple Name
|
|
IN_EIAMonthlyRateGas, !- Tariff Name
|
|
SubTotal, !- Source Variable
|
|
Annual, !- Season
|
|
Taxes, !- Category Variable Name
|
|
0.08; !- Cost per Unit Value or Variable Name
|
|
|
|
! ***GENERAL REPORTING***
|
|
|
|
OutputControl:ReportingTolerances,
|
|
0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC}
|
|
0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC}
|
|
|
|
Output:SQLite,
|
|
SimpleAndTabular; !- Option Type
|
|
|
|
EnvironmentalImpactFactors,
|
|
0.663, !- District Heating Efficiency
|
|
4.18, !- District Cooling COP {W/W}
|
|
0.585, !- Steam Conversion Efficiency
|
|
80.7272, !- Total Carbon Equivalent Emission Factor From N2O {kg/kg}
|
|
6.2727, !- Total Carbon Equivalent Emission Factor From CH4 {kg/kg}
|
|
0.2727; !- Total Carbon Equivalent Emission Factor From CO2 {kg/kg}
|
|
|
|
! Indiana electricity source and emission factors based on Deru and Torcellini 2007
|
|
|
|
FuelFactors,
|
|
Electricity, !- Existing Fuel Resource Name
|
|
kg, !- Units of Measure
|
|
, !- Energy per Unit Factor
|
|
3.546, !- Source Energy Factor {J/J}
|
|
, !- Source Energy Schedule Name
|
|
3.417E+02, !- CO2 Emission Factor {g/MJ}
|
|
, !- CO2 Emission Factor Schedule Name
|
|
1.186E-01, !- CO Emission Factor {g/MJ}
|
|
, !- CO Emission Factor Schedule Name
|
|
7.472E-01, !- CH4 Emission Factor {g/MJ}
|
|
, !- CH4 Emission Factor Schedule Name
|
|
6.222E-01, !- NOx Emission Factor {g/MJ}
|
|
, !- NOx Emission Factor Schedule Name
|
|
8.028E-03, !- N2O Emission Factor {g/MJ}
|
|
, !- N2O Emission Factor Schedule Name
|
|
1.872E+00, !- SO2 Emission Factor {g/MJ}
|
|
, !- SO2 Emission Factor Schedule Name
|
|
0.0, !- PM Emission Factor {g/MJ}
|
|
, !- PM Emission Factor Schedule Name
|
|
1.739E-02, !- PM10 Emission Factor {g/MJ}
|
|
, !- PM10 Emission Factor Schedule Name
|
|
0.0, !- PM2.5 Emission Factor {g/MJ}
|
|
, !- PM2.5 Emission Factor Schedule Name
|
|
0.0, !- NH3 Emission Factor {g/MJ}
|
|
, !- NH3 Emission Factor Schedule Name
|
|
1.019E-02, !- NMVOC Emission Factor {g/MJ}
|
|
, !- NMVOC Emission Factor Schedule Name
|
|
5.639E-06, !- Hg Emission Factor {g/MJ}
|
|
, !- Hg Emission Factor Schedule Name
|
|
2.778E-05, !- Pb Emission Factor {g/MJ}
|
|
, !- Pb Emission Factor Schedule Name
|
|
0.4309556, !- Water Emission Factor {L/MJ}
|
|
, !- Water Emission Factor Schedule Name
|
|
0, !- Nuclear High Level Emission Factor {g/MJ}
|
|
, !- Nuclear High Level Emission Factor Schedule Name
|
|
0; !- Nuclear Low Level Emission Factor {m3/MJ}
|
|
|
|
! Deru and Torcellini 2007
|
|
! Source Energy and Emission Factors for Energy Use in Buildings
|
|
! NREL/TP-550-38617
|
|
! source factor and Higher Heating Values from Table 5
|
|
! post-combustion emission factors for boiler from Table 9 (with factor of 1000 correction for natural gas)
|
|
|
|
FuelFactors,
|
|
NaturalGas, !- Existing Fuel Resource Name
|
|
m3, !- Units of Measure
|
|
37631000, !- Energy per Unit Factor
|
|
1.092, !- Source Energy Factor {J/J}
|
|
, !- Source Energy Schedule Name
|
|
5.21E+01, !- CO2 Emission Factor {g/MJ}
|
|
, !- CO2 Emission Factor Schedule Name
|
|
3.99E-02, !- CO Emission Factor {g/MJ}
|
|
, !- CO Emission Factor Schedule Name
|
|
1.06E-03, !- CH4 Emission Factor {g/MJ}
|
|
, !- CH4 Emission Factor Schedule Name
|
|
4.73E-02, !- NOx Emission Factor {g/MJ}
|
|
, !- NOx Emission Factor Schedule Name
|
|
1.06E-03, !- N2O Emission Factor {g/MJ}
|
|
, !- N2O Emission Factor Schedule Name
|
|
2.68E-04, !- SO2 Emission Factor {g/MJ}
|
|
, !- SO2 Emission Factor Schedule Name
|
|
0.0, !- PM Emission Factor {g/MJ}
|
|
, !- PM Emission Factor Schedule Name
|
|
3.59E-03, !- PM10 Emission Factor {g/MJ}
|
|
, !- PM10 Emission Factor Schedule Name
|
|
0.0, !- PM2.5 Emission Factor {g/MJ}
|
|
, !- PM2.5 Emission Factor Schedule Name
|
|
0, !- NH3 Emission Factor {g/MJ}
|
|
, !- NH3 Emission Factor Schedule Name
|
|
2.61E-03, !- NMVOC Emission Factor {g/MJ}
|
|
, !- NMVOC Emission Factor Schedule Name
|
|
1.11E-07, !- Hg Emission Factor {g/MJ}
|
|
, !- Hg Emission Factor Schedule Name
|
|
2.13E-07, !- Pb Emission Factor {g/MJ}
|
|
, !- Pb Emission Factor Schedule Name
|
|
0, !- Water Emission Factor {L/MJ}
|
|
, !- Water Emission Factor Schedule Name
|
|
0, !- Nuclear High Level Emission Factor {g/MJ}
|
|
, !- Nuclear High Level Emission Factor Schedule Name
|
|
0; !- Nuclear Low Level Emission Factor {m3/MJ}
|
|
|
|
Curve:Bicubic,
|
|
WC Screw GTE 300tons Default 90.1-2004 EIR_fPLR, !- Name
|
|
-2.737954E-01, !- Coefficient1 Constant
|
|
2.822257E-02, !- Coefficient2 x
|
|
-8.097657E-05, !- Coefficient3 x**2
|
|
9.612284E-01, !- Coefficient4 y
|
|
3.029741E-01, !- Coefficient5 y**2
|
|
-2.421933E-02, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
-3.885224E-02, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
18.54, !- Minimum Value of x
|
|
31.63, !- Maximum Value of x
|
|
0.20, !- Minimum Value of y
|
|
1.02; !- Maximum Value of y
|
|
|
|
OutputControl:Table:Style,
|
|
HTML; !- Column Separator
|
|
|
|
Output:Table:SummaryReports,
|
|
AllSummary; !- Report 1 Name
|
|
|
|
Output:Meter,Electricity:Facility,hourly;
|
|
|
|
Output:Meter,Heating:Electricity,hourly;
|
|
|
|
Output:Meter,Cooling:Electricity,hourly;
|
|
|
|
Output:Meter,InteriorLights:Electricity,hourly;
|
|
|
|
Output:Meter,ExteriorLights:Electricity,hourly;
|
|
|
|
Output:Meter,InteriorEquipment:Electricity,hourly;
|
|
|
|
Output:Meter,ExteriorEquipment:Electricity,hourly;
|
|
|
|
Output:Meter,Fans:Electricity,hourly;
|
|
|
|
Output:Meter,Pumps:Electricity,hourly;
|
|
|
|
Output:Meter,HeatRejection:Electricity,hourly;
|
|
|
|
Output:Meter,Humidifier:Electricity,hourly;
|
|
|
|
Output:Meter,Refrigeration:Electricity,hourly;
|
|
|
|
Output:Meter,WaterSystems:Electricity,hourly;
|
|
|
|
Output:Meter,NaturalGas:Facility,hourly;
|
|
|
|
Output:Meter,Heating:NaturalGas,hourly;
|
|
|
|
Output:Meter,InteriorEquipment:NaturalGas,hourly;
|
|
|
|
Output:Meter,WaterSystems:NaturalGas,hourly;
|
|
|