3117 lines
145 KiB
Plaintext
3117 lines
145 KiB
Plaintext
! RefBldgWarehouseNew2004_Chicago.idf
|
|
!
|
|
! This example file is based on Version 1.3_5.0 and was transitioned to Version 6.0 using the transition utility
|
|
!
|
|
! DOE Commercial Reference Building
|
|
! Warehouse, new construction 90.1-2004
|
|
! Version 1.3_5.0
|
|
! EnergyPlus Version 6.0
|
|
! ASHRAE Standards 90.1-2004 and 62-1999
|
|
!
|
|
! Description: Single story, three zones
|
|
! Form: Area = 4,835 m2 (52,045 ft2); Number of Stories = 1; Shape = rectangle; Aspect ratio = 2.2
|
|
! Envelope: Envelope thermal properties vary with climate according to ASHRAE Standard 90.1-2004.
|
|
! Opaque constructions: metal building walls; metal building roof; slab-on-grade floor
|
|
! Windows: window-to-wall ratio = 0.58%
|
|
! Infiltration = 0.4 cfm/ft2 above grade wall area at 0.3 in wc (75 Pa) adjusted to 0.016 in wc (4 Pa).
|
|
! 100% of full value when ventilation system on.
|
|
! HVAC: PSZ-AC with gas furnace in office and fine storage,
|
|
! unit heater and ventilation in bulk storage
|
|
! Economizers per 90.1-2004
|
|
!
|
|
! Int. gains: W/m2 (W/ft2) lights elec plug gas plug people
|
|
! Office 11.8 (1.1) 8.1 (0.75) 0 5
|
|
! Fine Storage 15.1 (1.4) 0.0 (0.0) 0 0
|
|
! Bulk Storage 9.7 (0.9) 2.56 (0.24) 0 0
|
|
!
|
|
! Detached Shading: None
|
|
! Daylight: None
|
|
! Natural Ventilation: None
|
|
! Zonal Equipment: ZoneHVAC:UnitHeater (gas)
|
|
! Air Primary Loops: PSZ-AC
|
|
! Plant Loops: None
|
|
! System Equipment Autosize: Yes
|
|
! Purchased Cooling: None
|
|
! Purchased Heating: None
|
|
! Coils: Coil:Cooling:DX:SingleSpeed; Coil:Heating:Fuel
|
|
! Pumps: None
|
|
! Boilers: None
|
|
! Chillers: None
|
|
!***** NOTICE *****
|
|
!***** The Reference Buildings were prepared as an account of work sponsored by an *****
|
|
!***** agency of the United States government. Neither the United States *****
|
|
!***** government nor any agency thereof, nor any of their employees, makes *****
|
|
!***** any warranty, express or implied, or assumes any legal liability or *****
|
|
!***** responsibility for the accuracy, completeness, or usefulness of any *****
|
|
!***** information, apparatus, product, or process disclosed, or represents *****
|
|
!***** that its use would not infringe privately owned rights. Reference *****
|
|
!***** herein to any specific commercial product, process, or service by *****
|
|
!***** trade name, trademark, manufacturer, or otherwise does not necessarily *****
|
|
!***** constitute or imply its endorsement, recommendation, or favoring by *****
|
|
!***** the United States government or any agency thereof. The views and *****
|
|
!***** opinions of authors expressed herein do not necessarily state or *****
|
|
!***** reflect those of the United States government or any agency thereof. *****
|
|
!***** Access to and use of the Reference Buildings imposes the following obligations *****
|
|
!***** on the user. The user agrees to credit DOE, NREL, PNNL, and LBNL in *****
|
|
!***** any publication(s) that that result from the use of Reference Buildings. *****
|
|
!***** However, the names of DOE/NREL/PNNL/LBNL may not be used in any *****
|
|
!***** advertising or publicity that implies endorsement or promotion of any *****
|
|
!***** products, services or commercial entities. *****
|
|
! Reference citation for the Commercial Reference Buildings:
|
|
! Deru, M.; Field, K.; Studer, D.; Benne, K.; Griffith, B.; Torcellini, P;
|
|
! Halverson, M.; Winiarski, D.; Liu, B.; Rosenberg, M.; Huang, J.;
|
|
! Yazdanian, M.; Crawley, D. (2010).
|
|
! U.S. Department of Energy Commercial Reference Building Models of the National Building Stock.
|
|
! Washington, DC: U.S. Department of Energy, Energy Efficiency and
|
|
! Renewable Energy, Office of Building Technologies.
|
|
! ***GENERAL SIMULATION PARAMETERS***
|
|
! Number of Zones: 3
|
|
|
|
Version,25.1;
|
|
|
|
SimulationControl,
|
|
YES, !- Do Zone Sizing Calculation
|
|
YES, !- Do System Sizing Calculation
|
|
YES, !- Do Plant Sizing Calculation
|
|
YES, !- Run Simulation for Sizing Periods
|
|
NO, !- Run Simulation for Weather File Run Periods
|
|
No, !- Do HVAC Sizing Simulation for Sizing Periods
|
|
1; !- Maximum Number of HVAC Sizing Simulation Passes
|
|
|
|
Building,
|
|
Ref Bldg Warehouse New2004_v1.3_5.0, !- Name
|
|
0.0000, !- North Axis {deg}
|
|
City, !- Terrain
|
|
0.0400, !- Loads Convergence Tolerance Value {W}
|
|
0.2000, !- Temperature Convergence Tolerance Value {deltaC}
|
|
FullInteriorAndExterior, !- Solar Distribution
|
|
40, !- Maximum Number of Warmup Days
|
|
6; !- Minimum Number of Warmup Days
|
|
|
|
RunPeriod,
|
|
Run Period 1, !- Name
|
|
1, !- Begin Month
|
|
1, !- Begin Day of Month
|
|
, !- Begin Year
|
|
12, !- End Month
|
|
31, !- End Day of Month
|
|
, !- End Year
|
|
Sunday, !- Day of Week for Start Day
|
|
No, !- Use Weather File Holidays and Special Days
|
|
No, !- Use Weather File Daylight Saving Period
|
|
No, !- Apply Weekend Holiday Rule
|
|
Yes, !- Use Weather File Rain Indicators
|
|
Yes; !- Use Weather File Snow Indicators
|
|
|
|
! ***HOLIDAYS & DAYLIGHT SAVINGS***
|
|
|
|
RunPeriodControl:DaylightSavingTime,
|
|
2nd Sunday in March, !- Start Date
|
|
1st Sunday in November; !- End Date
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
New Years Day, !- Name
|
|
January 1, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Veterans Day, !- Name
|
|
November 11, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Christmas, !- Name
|
|
December 25, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Independence Day, !- Name
|
|
July 4, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
MLK Day, !- Name
|
|
3rd Monday in January, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Presidents Day, !- Name
|
|
3rd Monday in February, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Memorial Day, !- Name
|
|
Last Monday in May, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Labor Day, !- Name
|
|
1st Monday in September, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Columbus Day, !- Name
|
|
2nd Monday in October, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Thanksgiving, !- Name
|
|
4th Thursday in November,!- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
! ***SCHEDULE TYPES***
|
|
|
|
ScheduleTypeLimits,
|
|
Any Number; !- Name
|
|
|
|
ScheduleTypeLimits,
|
|
Fraction, !- Name
|
|
0.0, !- Lower Limit Value
|
|
1.0, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Temperature, !- Name
|
|
-60, !- Lower Limit Value
|
|
200, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
On/Off, !- Name
|
|
0, !- Lower Limit Value
|
|
1, !- Upper Limit Value
|
|
DISCRETE; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Control Type, !- Name
|
|
0, !- Lower Limit Value
|
|
4, !- Upper Limit Value
|
|
DISCRETE; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Humidity, !- Name
|
|
10, !- Lower Limit Value
|
|
90, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Number; !- Name
|
|
|
|
! ***ALWAYS ON SCHEDULE***
|
|
|
|
Schedule:Compact,
|
|
ALWAYS_ON, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1; !- Field 3
|
|
|
|
! ***MISC SIMULATION PARAMETERS***
|
|
|
|
SurfaceConvectionAlgorithm:Inside,TARP;
|
|
|
|
SurfaceConvectionAlgorithm:Outside,DOE-2;
|
|
|
|
HeatBalanceAlgorithm,ConductionTransferFunction,200.0000;
|
|
|
|
ZoneAirHeatBalanceAlgorithm,
|
|
AnalyticalSolution; !- Algorithm
|
|
|
|
Sizing:Parameters,
|
|
1.2, !- Heating Sizing Factor
|
|
1.2, !- Cooling Sizing Factor
|
|
6; !- Timesteps in Averaging Window
|
|
|
|
ConvergenceLimits,
|
|
2, !- Minimum System Timestep {minutes}
|
|
25; !- Maximum HVAC Iterations
|
|
|
|
ShadowCalculation,
|
|
PolygonClipping, !- Shading Calculation Method
|
|
Periodic, !- Shading Calculation Update Frequency Method
|
|
7, !- Shading Calculation Update Frequency
|
|
15000; !- Maximum Figures in Shadow Overlap Calculations
|
|
|
|
Timestep,6;
|
|
|
|
! WeatherFileName=USA_IL_Chicago-OHare_TMY2.epw
|
|
|
|
Site:Location,
|
|
USA IL-CHICAGO-OHARE, !- Name
|
|
41.77, !- Latitude {deg}
|
|
-87.75, !- Longitude {deg}
|
|
-6.00, !- Time Zone {hr}
|
|
190; !- Elevation {m}
|
|
|
|
! CHICAGO_IL_USA Annual Heating 99.6%, MaxDB=-20.6°C
|
|
|
|
SizingPeriod:DesignDay,
|
|
CHICAGO Ann Htg 99.6% Condns DB, !- Name
|
|
1, !- Month
|
|
21, !- Day of Month
|
|
WinterDesignDay, !- Day Type
|
|
-20.6, !- Maximum Dry-Bulb Temperature {C}
|
|
0.0, !- Daily Dry-Bulb Temperature Range {deltaC}
|
|
, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Day Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
-20.6, !- Wetbulb or DewPoint at Maximum Dry-Bulb {C}
|
|
, !- Humidity Condition Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily Wet-Bulb Temperature Range {deltaC}
|
|
99063., !- Barometric Pressure {Pa}
|
|
4.9, !- Wind Speed {m/s}
|
|
270, !- Wind Direction {deg}
|
|
No, !- Rain Indicator
|
|
No, !- Snow Indicator
|
|
No, !- Daylight Saving Time Indicator
|
|
ASHRAEClearSky, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless}
|
|
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless}
|
|
0.00; !- Sky Clearness
|
|
|
|
! CHICAGO_IL_USA Annual Cooling (WB=>MDB) .4%, MDB=31.2°C WB=25.5°C
|
|
|
|
SizingPeriod:DesignDay,
|
|
CHICAGO Ann Clg .4% Condns WB=>MDB, !- Name
|
|
7, !- Month
|
|
21, !- Day of Month
|
|
SummerDesignDay, !- Day Type
|
|
31.2, !- Maximum Dry-Bulb Temperature {C}
|
|
10.7, !- Daily Dry-Bulb Temperature Range {deltaC}
|
|
, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Day Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
25.5, !- Wetbulb or DewPoint at Maximum Dry-Bulb {C}
|
|
, !- Humidity Condition Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily Wet-Bulb Temperature Range {deltaC}
|
|
99063., !- Barometric Pressure {Pa}
|
|
5.3, !- Wind Speed {m/s}
|
|
230, !- Wind Direction {deg}
|
|
No, !- Rain Indicator
|
|
No, !- Snow Indicator
|
|
No, !- Daylight Saving Time Indicator
|
|
ASHRAEClearSky, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless}
|
|
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless}
|
|
1.00; !- Sky Clearness
|
|
|
|
Site:WaterMainsTemperature,
|
|
CORRELATION, !- Calculation Method
|
|
, !- Temperature Schedule Name
|
|
9.69, !- Annual Average Outdoor Air Temperature {C}
|
|
28.10; !- Maximum Difference In Monthly Average Outdoor Air Temperatures {deltaC}
|
|
|
|
Site:GroundTemperature:BuildingSurface,10.34,10.19,11.31,13.07,16.39,19.30,22.10,24.20,21.69,17.32,14.23,11.34;
|
|
|
|
! ***OPAQUE CONSTRUCTIONS AND MATERIALS***
|
|
! Exterior Walls
|
|
|
|
Construction,
|
|
Metal Bldg Semi-Cond Ext Wall, !- Name
|
|
Metal Siding, !- Outside Layer
|
|
Metal Building Semi-Cond Wall Insulation, !- Layer 2
|
|
1/2IN Gypsum; !- Layer 3
|
|
|
|
Material,
|
|
Metal Building Semi-Cond Wall Insulation, !- Name
|
|
MediumRough, !- Roughness
|
|
0.0495494599433393, !- Thickness {m}
|
|
0.049, !- Conductivity {W/m-K}
|
|
265.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! Roof
|
|
|
|
Construction,
|
|
Metal Bldg Semi-Cond Roof, !- Name
|
|
Metal Roofing, !- Outside Layer
|
|
Metal Semi-Cond Roof Insulation; !- Layer 2
|
|
|
|
Material,
|
|
Metal Semi-Cond Roof Insulation, !- Name
|
|
MediumRough, !- Roughness
|
|
0.0822341258092582, !- Thickness {m}
|
|
0.049, !- Conductivity {W/m-K}
|
|
265.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! Slab on grade, unheated
|
|
|
|
Construction,
|
|
ext-slab, !- Name
|
|
HW CONCRETE; !- Outside Layer
|
|
|
|
! Interior Walls
|
|
|
|
Construction,
|
|
int-walls, !- Name
|
|
1/2IN Gypsum, !- Outside Layer
|
|
1/2IN Gypsum; !- Layer 2
|
|
|
|
! ***WINDOW/DOOR CONSTRUCTIONS AND MATERIALS***
|
|
|
|
Construction,
|
|
Window Semi-Cond Fixed, !- Name
|
|
Semi-Cond Fixed Assembly Window; !- Outside Layer
|
|
|
|
WindowMaterial:SimpleGlazingSystem,
|
|
Semi-Cond Fixed Assembly Window, !- Name
|
|
6.92716, !- U-Factor {W/m2-K}
|
|
0.7, !- Solar Heat Gain Coefficient
|
|
; !- Visible Transmittance
|
|
|
|
Construction,
|
|
Swinging Door Semi-Cond, !- Name
|
|
Opaque Door panel Semi-Cond; !- Outside Layer
|
|
|
|
Material:NoMass,
|
|
Opaque Door panel Semi-Cond, !- Name
|
|
MediumRough, !- Roughness
|
|
0.101897046243647, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
Construction,
|
|
Overhead Door Semi-Cond, !- Name
|
|
Std Overhead Door Panel Semi-Cond; !- Outside Layer
|
|
|
|
Material:NoMass,
|
|
Std Overhead Door Panel Semi-Cond, !- Name
|
|
MediumRough, !- Roughness
|
|
0.001, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
! ***COMMON CONSTRUCTIONS AND MATERIALS***
|
|
|
|
Construction,
|
|
InteriorFurnishings, !- Name
|
|
Std Wood 6inch; !- Outside Layer
|
|
|
|
Material,
|
|
Std Wood 6inch, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.15, !- Thickness {m}
|
|
0.12, !- Conductivity {W/m-K}
|
|
540.0000, !- Density {kg/m3}
|
|
1210, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.7000000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Wood Siding, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0100, !- Thickness {m}
|
|
0.1100, !- Conductivity {W/m-K}
|
|
544.6200, !- Density {kg/m3}
|
|
1210.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7800, !- Solar Absorptance
|
|
0.7800; !- Visible Absorptance
|
|
|
|
Material,
|
|
1/2IN Gypsum, !- Name
|
|
Smooth, !- Roughness
|
|
0.0127, !- Thickness {m}
|
|
0.1600, !- Conductivity {W/m-K}
|
|
784.9000, !- Density {kg/m3}
|
|
830.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.9200, !- Solar Absorptance
|
|
0.9200; !- Visible Absorptance
|
|
|
|
Material,
|
|
1IN Stucco, !- Name
|
|
Smooth, !- Roughness
|
|
0.0253, !- Thickness {m}
|
|
0.6918, !- Conductivity {W/m-K}
|
|
1858.0000, !- Density {kg/m3}
|
|
837.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.9200, !- Solar Absorptance
|
|
0.9200; !- Visible Absorptance
|
|
|
|
Material,
|
|
8IN CONCRETE HW, !- Name
|
|
Rough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
1.3110, !- Conductivity {W/m-K}
|
|
2240.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Metal Siding, !- Name
|
|
Smooth, !- Roughness
|
|
0.0015, !- Thickness {m}
|
|
44.9600, !- Conductivity {W/m-K}
|
|
7688.8600, !- Density {kg/m3}
|
|
410.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.2000, !- Solar Absorptance
|
|
0.2000; !- Visible Absorptance
|
|
|
|
Material,
|
|
HW CONCRETE, !- Name
|
|
Rough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
1.3110, !- Conductivity {W/m-K}
|
|
2240.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
CP02 CARPET PAD, !- Name
|
|
VeryRough, !- Roughness
|
|
0.2165, !- Thermal Resistance {m2-K/W}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.8000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Roof Membrane, !- Name
|
|
VeryRough, !- Roughness
|
|
0.0095, !- Thickness {m}
|
|
0.1600, !- Conductivity {W/m-K}
|
|
1121.2900, !- Density {kg/m3}
|
|
1460.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Metal Decking, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0015, !- Thickness {m}
|
|
45.0060, !- Conductivity {W/m-K}
|
|
7680.0000, !- Density {kg/m3}
|
|
418.4000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.3000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Metal Roofing, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0015, !- Thickness {m}
|
|
45.0060, !- Conductivity {W/m-K}
|
|
7680.0000, !- Density {kg/m3}
|
|
418.4000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.3000; !- Visible Absorptance
|
|
|
|
Material,
|
|
MAT-CC05 4 HW CONCRETE, !- Name
|
|
Rough, !- Roughness
|
|
0.1016, !- Thickness {m}
|
|
1.3110, !- Conductivity {W/m-K}
|
|
2240.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! Acoustic tile for drop ceiling
|
|
|
|
Material,
|
|
Std AC02, !- Name
|
|
MediumSmooth, !- Roughness
|
|
1.2700000E-02, !- Thickness {m}
|
|
5.7000000E-02, !- Conductivity {W/m-K}
|
|
288.0000, !- Density {kg/m3}
|
|
1339.000, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.2000000; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
MAT-AIR-WALL, !- Name
|
|
Rough, !- Roughness
|
|
0.2079491, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7; !- Solar Absorptance
|
|
|
|
! ZONE LIST:
|
|
! BulkStorage
|
|
! FineStorage
|
|
! Office
|
|
! ***ZONES***
|
|
|
|
Zone,
|
|
BulkStorage, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
FineStorage, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Office, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
! ***WALLS***
|
|
|
|
BuildingSurface:Detailed,
|
|
BulkStorage_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
Metal Bldg Semi-Cond Roof, !- Construction Name
|
|
BulkStorage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,100.5790,8.5340, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,30.4785,8.5340, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.7178,30.4785,8.5340, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.7178,100.5790,8.5340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BulkStorage_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
BulkStorage, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.7178,100.5790,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7178,30.4785,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,30.4785,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,100.5790,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BulkStorage_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Metal Bldg Semi-Cond Ext Wall, !- Construction Name
|
|
BulkStorage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.7178,30.4785,8.5340, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7178,30.4785,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.7178,100.5790,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.7178,100.5790,8.5340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BulkStorage_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Metal Bldg Semi-Cond Ext Wall, !- Construction Name
|
|
BulkStorage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.7178,100.5790,8.5340, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7178,100.5790,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,100.5790,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,100.5790,8.5340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BulkStorage_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Metal Bldg Semi-Cond Ext Wall, !- Construction Name
|
|
BulkStorage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,100.5790,8.5340, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,100.5790,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,30.4785,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,30.4785,8.5340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Fine Storage Office_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Metal Bldg Semi-Cond Ext Wall, !- Construction Name
|
|
FineStorage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,8.5340, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,4.2670, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.9067,0.0000,4.2670, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.9067,0.0000,8.5340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Fine Storage Office_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Metal Bldg Semi-Cond Ext Wall, !- Construction Name
|
|
FineStorage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1435,8.5340, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1435,4.2670, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,4.2670, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,8.5340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FineStorage_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
Metal Bldg Semi-Cond Roof, !- Construction Name
|
|
FineStorage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.7178,0.0000,8.5340, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7178,30.4785,8.5340, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,30.4785,8.5340, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,8.5340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FineStorage_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
FineStorage, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
45.7178,30.4785,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7178,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.9067,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.9067,9.1435,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
0.0000,9.1435,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
0.0000,30.4785,0.0000; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FineStorage_Floor_2, !- Name
|
|
Floor, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
FineStorage, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,4.2670, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1435,4.2670, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.9067,9.1435,4.2670, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.9067,0.0000,4.2670; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FineStorage_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Metal Bldg Semi-Cond Ext Wall, !- Construction Name
|
|
FineStorage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.7178,0.0000,8.5340, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7178,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.7178,30.4785,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.7178,30.4785,8.5340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FineStorage_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
FineStorage, !- Zone Name
|
|
, !- Space Name
|
|
Zone, !- Outside Boundary Condition
|
|
BulkStorage, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.7178,30.4785,8.5340, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7178,30.4785,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,30.4785,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,30.4785,8.5340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FineStorage_Wall_South_1,!- Name
|
|
Wall, !- Surface Type
|
|
Metal Bldg Semi-Cond Ext Wall, !- Construction Name
|
|
FineStorage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.9067,0.0000,8.5340, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.9067,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.7178,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.7178,0.0000,8.5340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FineStorage_Wall_West_1, !- Name
|
|
Wall, !- Surface Type
|
|
Metal Bldg Semi-Cond Ext Wall, !- Construction Name
|
|
FineStorage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,30.4785,8.5340, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,30.4785,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1435,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,9.1435,8.5340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FineStorage_Floor_2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.9067,0.0000,4.2670, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.9067,9.1435,4.2670, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1435,4.2670, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,4.2670; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Office, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.9067,9.1435,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.9067,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,9.1435,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Metal Bldg Semi-Cond Ext Wall, !- Construction Name
|
|
Office, !- Zone Name
|
|
, !- Space Name
|
|
Zone, !- Outside Boundary Condition
|
|
FineStorage, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.9067,0.0000,4.2670, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.9067,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.9067,9.1435,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.9067,9.1435,4.2670; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Metal Bldg Semi-Cond Ext Wall, !- Construction Name
|
|
Office, !- Zone Name
|
|
, !- Space Name
|
|
Zone, !- Outside Boundary Condition
|
|
FineStorage, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
25.9067,9.1435,4.2670, !- X,Y,Z ==> Vertex 1 {m}
|
|
25.9067,9.1435,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1435,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,9.1435,4.2670; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Metal Bldg Semi-Cond Ext Wall, !- Construction Name
|
|
Office, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,4.2670, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
25.9067,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
25.9067,0.0000,4.2670; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Metal Bldg Semi-Cond Ext Wall, !- Construction Name
|
|
Office, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1435,4.2670, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1435,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,4.2670; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
! ***WINDOWS & DOORS***
|
|
|
|
FenestrationSurface:Detailed,
|
|
BulkStorage_Wall_East_Door_1, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Semi-Cond, !- Construction Name
|
|
BulkStorage_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
45.718,47.5465,2.1335, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.718,47.5465,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.718,48.4608,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.718,48.4608,2.1335; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
BulkStorage_Wall_East_Door_2, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Semi-Cond, !- Construction Name
|
|
BulkStorage_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
45.718,65.0716,2.1335, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.718,65.0716,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.718,65.9860,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.718,65.9860,2.1335; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
BulkStorage_Wall_East_Door_3, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Semi-Cond, !- Construction Name
|
|
BulkStorage_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
45.718,82.5968,2.1335, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.718,82.5968,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.718,83.5111,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.718,83.5111,2.1335; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
BulkStorage_Wall_West_OHDoor_1, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door Semi-Cond, !- Construction Name
|
|
BulkStorage_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,93.9500,3.0478, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,93.9500,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,91.5117,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,91.5117,3.0478; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
BulkStorage_Wall_West_OHDoor_2, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door Semi-Cond, !- Construction Name
|
|
BulkStorage_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,84.8827,3.0478, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,84.8827,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,82.4444,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,82.4444,3.0478; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
BulkStorage_Wall_West_OHDoor_3, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door Semi-Cond, !- Construction Name
|
|
BulkStorage_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,75.8153,3.0478, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,75.8153,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,73.3770,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,73.3770,3.0478; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
BulkStorage_Wall_West_OHDoor_4, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door Semi-Cond, !- Construction Name
|
|
BulkStorage_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,66.7479,3.0478, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,66.7479,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,64.3097,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,64.3097,3.0478; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
BulkStorage_Wall_West_OHDoor_5, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door Semi-Cond, !- Construction Name
|
|
BulkStorage_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,57.6806,3.0478, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,57.6806,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,55.2423,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,55.2423,3.0478; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
BulkStorage_Wall_West_OHDoor_6, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door Semi-Cond, !- Construction Name
|
|
BulkStorage_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,48.6132,3.0478, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,48.6132,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,46.1749,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,46.1749,3.0478; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
BulkStorage_Wall_West_OHDoor_7, !- Name
|
|
Door, !- Surface Type
|
|
Overhead Door Semi-Cond, !- Construction Name
|
|
BulkStorage_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,39.5459,3.0478, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,39.5459,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,37.1076,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,37.1076,3.0478; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
FineStorage_Wall_East_Door_1, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Semi-Cond, !- Construction Name
|
|
FineStorage_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
45.718,14.7821,2.1335, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.718,14.7821,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.718,15.6964,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.718,15.6964,2.1335; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
FineStorage_Wall_West_1_Door_1, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Semi-Cond, !- Construction Name
|
|
FineStorage_Wall_West_1, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,20.2682,2.1335, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,20.2682,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,19.3539,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,19.3539,2.1335; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office_Wall_South Window 1, !- Name
|
|
Window, !- Surface Type
|
|
Window Semi-Cond Fixed, !- Construction Name
|
|
Office_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
3.6574,0.0000,2.4393, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6574,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
7.3148,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
7.3148,0.0000,2.4393; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office_Wall_South Window2, !- Name
|
|
Window, !- Surface Type
|
|
Window Semi-Cond Fixed, !- Construction Name
|
|
Office_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
18.5919,0.0000,2.4393, !- X,Y,Z ==> Vertex 1 {m}
|
|
18.5919,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
22.2493,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
22.2493,0.0000,2.4393; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office_Wall_South_Door_1,!- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Semi-Cond, !- Construction Name
|
|
Office_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
12.039,0.0000,2.1335, !- X,Y,Z ==> Vertex 1 {m}
|
|
12.039,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
13.868,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
13.868,0.0000,2.1335; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office_Wall_West Door, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Semi-Cond, !- Construction Name
|
|
Office_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,5.0290,2.1335, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,5.0290,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,4.1146,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,4.1146,2.1335; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office_Wall_West Window1,!- Name
|
|
Window, !- Surface Type
|
|
Window Semi-Cond Fixed, !- Construction Name
|
|
Office_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,7.5191,2.4393, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,7.5191,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.3856,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.3856,2.4393; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office_Wall_West Window2,!- Name
|
|
Window, !- Surface Type
|
|
Window Semi-Cond Fixed, !- Construction Name
|
|
Office_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,3.7580,2.4393, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.7580,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,1.6245,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,1.6245,2.4393; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
! ***GEOMETRY RULES***
|
|
|
|
GlobalGeometryRules,
|
|
UpperLeftCorner, !- Starting Vertex Position
|
|
Counterclockwise, !- Vertex Entry Direction
|
|
Relative, !- Coordinate System
|
|
Relative; !- Daylighting Reference Point Coordinate System
|
|
|
|
! ***PEOPLE***
|
|
|
|
People,
|
|
Office People, !- Name
|
|
Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
People, !- Number of People Calculation Method
|
|
5.0, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
! ***LIGHTS***
|
|
|
|
Lights,
|
|
BulkStorage_Lights, !- Name
|
|
BulkStorage, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.68, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.5000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
FineStorage_Lights, !- Name
|
|
FineStorage, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
15.06, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.5000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Office_Lights, !- Name
|
|
Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.5000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
! ***EQUIPMENT GAINS***
|
|
|
|
ElectricEquipment,
|
|
BulkStorage_MiscPlug_Equip, !- Name
|
|
BulkStorage, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
2.56, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Office_MiscPlug_Equip, !- Name
|
|
Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
8.07, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
! ***EXTERIOR LOADS***
|
|
|
|
Exterior:Lights,
|
|
Exterior Facade Lighting,!- Name
|
|
ALWAYS_ON, !- Schedule Name
|
|
8923, !- Design Level {W}
|
|
AstronomicalClock, !- Control Option
|
|
Exterior Facade Lighting;!- End-Use Subcategory
|
|
|
|
! ***INFILTRATION***
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
BulkStorage_Infiltration,!- Name
|
|
BulkStorage, !- Zone or ZoneList or Space or SpaceList Name
|
|
ALWAYS_ON, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
FineStorage_Infiltration,!- Name
|
|
FineStorage, !- Zone or ZoneList or Space or SpaceList Name
|
|
ALWAYS_ON, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Office_Infiltration, !- Name
|
|
Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
ALWAYS_ON, !- Schedule Name
|
|
Flow/ExteriorArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
! ***INTERNAL MASS***
|
|
|
|
InternalMass,
|
|
BulkStorage Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
BulkStorage, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
6409.6813; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
FineStorage Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
FineStorage, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
2786.8199; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Office Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Office, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
473.7584; !- Surface Area {m2}
|
|
|
|
! ***INTERNAL GAINS SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
ACTIVITY_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,120.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
AIR_VELO_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
BLDG_EQUIP_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 07:00,0.1, !- Field 3
|
|
Until: 08:00,0.5, !- Field 5
|
|
Until: 09:00,0.8, !- Field 7
|
|
Until: 12:00,0.9, !- Field 9
|
|
Until: 13:00,0.8, !- Field 11
|
|
Until: 17:00,0.9, !- Field 13
|
|
Until: 18:00,0.4, !- Field 15
|
|
Until: 24:00,0.1, !- Field 17
|
|
For: Saturday, !- Field 19
|
|
Until: 08:00,0.1, !- Field 20
|
|
Until: 09:00,0.2, !- Field 22
|
|
Until: 12:00,0.4, !- Field 24
|
|
Until: 24:00,0.1, !- Field 26
|
|
For: SummerDesignDay, !- Field 28
|
|
Until: 24:00,1.0, !- Field 29
|
|
For: WinterDesignDay, !- Field 31
|
|
Until: 24:00,0.0, !- Field 32
|
|
For: Sunday Holidays AllOtherDays, !- Field 34
|
|
Until: 24:00,0.1; !- Field 35
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 07:00,0.1, !- Field 3
|
|
Until: 08:00,0.4, !- Field 5
|
|
Until: 09:00,0.7, !- Field 7
|
|
Until: 12:00,0.9, !- Field 9
|
|
Until: 13:00,0.8, !- Field 11
|
|
Until: 17:00,0.9, !- Field 13
|
|
Until: 18:00,0.3, !- Field 15
|
|
Until: 24:00,0.1, !- Field 17
|
|
For: Saturday, !- Field 19
|
|
Until: 08:00,0.1, !- Field 20
|
|
Until: 09:00,0.1, !- Field 22
|
|
Until: 12:00,0.24, !- Field 24
|
|
Until: 24:00,0.1, !- Field 26
|
|
For: SummerDesignDay, !- Field 28
|
|
Until: 24:00,1.0, !- Field 29
|
|
For: WinterDesignDay, !- Field 31
|
|
Until: 24:00,0.0, !- Field 32
|
|
For: Sunday Holidays AllOtherDays, !- Field 34
|
|
Until: 24:00,0.1; !- Field 35
|
|
|
|
Schedule:Compact,
|
|
BLDG_OCC_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 07:00,0.0, !- Field 3
|
|
Until: 08:00,0.15, !- Field 5
|
|
Until: 09:00,0.7, !- Field 7
|
|
Until: 12:00,0.9, !- Field 9
|
|
Until: 13:00,0.5, !- Field 11
|
|
Until: 16:00,0.85, !- Field 13
|
|
Until: 17:00,0.2, !- Field 15
|
|
Until: 24:00,0.0, !- Field 17
|
|
For: SummerDesignDay, !- Field 19
|
|
Until: 24:00,1.0, !- Field 20
|
|
For: Saturday, !- Field 22
|
|
Until: 08:00,0.0, !- Field 23
|
|
Until: 12:00,0.2, !- Field 25
|
|
Until: 16:00,0.1, !- Field 27
|
|
Until: 24:00,0.0, !- Field 29
|
|
For: WinterDesignDay, !- Field 31
|
|
Until: 24:00,0.0, !- Field 32
|
|
For: Sunday Holidays AllOtherDays, !- Field 34
|
|
Until: 24:00,0.0; !- Field 35
|
|
|
|
Schedule:Compact,
|
|
CLOTHING_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 04/30, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0, !- Field 3
|
|
Through: 09/30, !- Field 5
|
|
For: AllDays, !- Field 6
|
|
Until: 24:00,0.5, !- Field 7
|
|
Through: 12/31, !- Field 9
|
|
For: AllDays, !- Field 10
|
|
Until: 24:00,1.0; !- Field 11
|
|
|
|
Schedule:Compact,
|
|
WORK_EFF_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
! ***HVAC EQUIPMENT***
|
|
|
|
Fan:OnOff,
|
|
FURNACE_PACU_CAV_1:1_Unitary_Package_fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.546, !- Fan Total Efficiency
|
|
622.0, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.84, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
FURNACE_PACU_CAV_1:1_OA-FURNACE_PACU_CAV_1:1_Unitary_PackageNode, !- Air Inlet Node Name
|
|
FURNACE_PACU_CAV_1:1_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
|
|
, !- Fan Power Ratio Function of Speed Ratio Curve Name
|
|
, !- Fan Efficiency Ratio Function of Speed Ratio Curve Name
|
|
Unitary Fans; !- End-Use Subcategory
|
|
|
|
Fan:OnOff,
|
|
FURNACE_PACU_CAV_2:2_Unitary_Package_fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.5915, !- Fan Total Efficiency
|
|
1109.648, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.91, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
FURNACE_PACU_CAV_2:2_OA-FURNACE_PACU_CAV_2:2_Unitary_PackageNode, !- Air Inlet Node Name
|
|
FURNACE_PACU_CAV_2:2_Unitary_PackageCoolCoil air inlet, !- Air Outlet Node Name
|
|
, !- Fan Power Ratio Function of Speed Ratio Curve Name
|
|
, !- Fan Efficiency Ratio Function of Speed Ratio Curve Name
|
|
Unitary Fans; !- End-Use Subcategory
|
|
|
|
Fan:ConstantVolume,
|
|
BulkStorage Unit HeaterFan, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
0.53625, !- Fan Total Efficiency
|
|
49.8, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
0.825, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
BulkStorage Unit Heater Exhaust Node, !- Air Inlet Node Name
|
|
BulkStorage Unit Heater Post Fan Node, !- Air Outlet Node Name
|
|
Unit Heater Fans; !- End-Use Subcategory
|
|
|
|
Coil:Heating:Fuel,
|
|
BulkStorage Unit Heater Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NaturalGas, !- Fuel Type
|
|
0.78, !- Burner Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
BulkStorage Unit Heater Post Fan Node, !- Air Inlet Node Name
|
|
BulkStorage Unit Heater Inlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Fuel,
|
|
FURNACE_PACU_CAV_1:1_Unitary_Package_HeatCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NaturalGas, !- Fuel Type
|
|
0.8, !- Burner Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
FURNACE_PACU_CAV_1:1_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
|
|
FURNACE_PACU_CAV_1:1 Supply Equipment Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Fuel,
|
|
FURNACE_PACU_CAV_2:2_Unitary_Package_HeatCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NaturalGas, !- Fuel Type
|
|
0.78, !- Burner Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
FURNACE_PACU_CAV_2:2_Unitary_PackageHeatCoil air inlet, !- Air Inlet Node Name
|
|
FURNACE_PACU_CAV_2:2 Supply Equipment Outlet Node; !- Air Outlet Node Name
|
|
|
|
Coil:Cooling:DX:SingleSpeed,
|
|
FURNACE_PACU_CAV_1:1_Unitary_Package_CoolCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Gross Rated Total Cooling Capacity {W}
|
|
AUTOSIZE, !- Gross Rated Sensible Heat Ratio
|
|
3.50015986358308, !- Gross Rated Cooling COP {W/W}
|
|
AUTOSIZE, !- Rated Air Flow Rate {m3/s}
|
|
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
|
|
934.4, !- 2023 Rated Evaporator Fan Power Per Volume Flow {W/(m3/s)}
|
|
FURNACE_PACU_CAV_1:1_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
|
|
FURNACE_PACU_CAV_1:1_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
|
|
Cool-Cap-fT, !- Total Cooling Capacity Function of Temperature Curve Name
|
|
ConstantCubic, !- Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
Cool-EIR-fT, !- Energy Input Ratio Function of Temperature Curve Name
|
|
ConstantCubic, !- Energy Input Ratio Function of Flow Fraction Curve Name
|
|
Cool-PLF-fPLR; !- Part Load Fraction Correlation Curve Name
|
|
|
|
Coil:Cooling:DX:SingleSpeed,
|
|
FURNACE_PACU_CAV_2:2_Unitary_Package_CoolCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Gross Rated Total Cooling Capacity {W}
|
|
AUTOSIZE, !- Gross Rated Sensible Heat Ratio
|
|
3.23372055845678, !- Gross Rated Cooling COP {W/W}
|
|
AUTOSIZE, !- Rated Air Flow Rate {m3/s}
|
|
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
|
|
934.4, !- 2023 Rated Evaporator Fan Power Per Volume Flow {W/(m3/s)}
|
|
FURNACE_PACU_CAV_2:2_Unitary_PackageCoolCoil air inlet, !- Air Inlet Node Name
|
|
FURNACE_PACU_CAV_2:2_Unitary_PackageHeatCoil air inlet, !- Air Outlet Node Name
|
|
Measured_CoolCStandard10Ton_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
|
|
Measured_CoolCStandard10Ton_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
Measured_CoolCStandard10Ton_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
|
|
Measured_CoolCStandard10Ton_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
|
|
No_PLR_Degredation; !- Part Load Fraction Correlation Curve Name
|
|
|
|
ZoneHVAC:UnitHeater,
|
|
BulkStorage Unit Heater, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
BulkStorage Unit Heater Exhaust Node, !- Air Inlet Node Name
|
|
BulkStorage Unit Heater Inlet Node Name, !- Air Outlet Node Name
|
|
Fan:ConstantVolume, !- Supply Air Fan Object Type
|
|
BulkStorage Unit HeaterFan, !- Supply Air Fan Name
|
|
AUTOSIZE, !- Maximum Supply Air Flow Rate {m3/s}
|
|
Coil:Heating:Fuel, !- Heating Coil Object Type
|
|
BulkStorage Unit Heater Coil, !- Heating Coil Name
|
|
, !- Supply Air Fan Operating Mode Schedule Name
|
|
No, !- Supply Air Fan Operation During No Heating
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
0.001; !- Heating Convergence Tolerance
|
|
|
|
ZoneVentilation:DesignFlowRate,
|
|
BulkStorage_Ventilation, !- Name
|
|
BulkStorage, !- Zone or ZoneList or Space or SpaceList Name
|
|
MinOA_Sched, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00025, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
INTAKE, !- Ventilation Type
|
|
49.8, !- Fan Pressure Rise {Pa}
|
|
0.53625, !- Fan Total Efficiency
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000, !- Velocity Squared Term Coefficient
|
|
7.5, !- Minimum Indoor Temperature {C}
|
|
, !- Minimum Indoor Temperature Schedule Name
|
|
35.0000, !- Maximum Indoor Temperature {C}
|
|
, !- Maximum Indoor Temperature Schedule Name
|
|
-27.5, !- Delta Temperature {deltaC}
|
|
, !- Delta Temperature Schedule Name
|
|
-30.0000, !- Minimum Outdoor Temperature {C}
|
|
, !- Minimum Outdoor Temperature Schedule Name
|
|
50.0000, !- Maximum Outdoor Temperature {C}
|
|
, !- Maximum Outdoor Temperature Schedule Name
|
|
6.0000; !- Maximum Wind Speed {m/s}
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
BulkStorage Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:UnitHeater, !- Zone Equipment 1 Object Type
|
|
BulkStorage Unit Heater, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
FineStorage Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
FineStorage Direct Air ADU, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Office Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Office Direct Air ADU, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
! ***SIZING & CONTROLS***
|
|
|
|
Sizing:Zone,
|
|
BulkStorage, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
14.0000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA BulkStorage, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA BulkStorage, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.00025, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
FineStorage, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
14.0000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA FineStorage, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA FineStorage, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.00025, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Office, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
14.0000, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0000, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Office, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Office, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
ZoneControl:Thermostat,
|
|
BulkStorage Thermostat, !- Name
|
|
BulkStorage, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
BulkStorage DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
FineStorage Thermostat, !- Name
|
|
FineStorage, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
FineStorage DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Office Thermostat, !- Name
|
|
Office, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Office DualSPSched; !- Control 1 Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
BulkStorage DualSPSched, !- Name
|
|
HTGSETP_BulkStorage_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
FineStorage DualSPSched, !- Name
|
|
HTGSETP_FineStorage_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_FineStorage_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Office DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
SetpointManager:SingleZone:Reheat,
|
|
SupAirTemp MngrFineStorage, !- Name
|
|
Temperature, !- Control Variable
|
|
10.0, !- Minimum Supply Air Temperature {C}
|
|
50.0, !- Maximum Supply Air Temperature {C}
|
|
FineStorage, !- Control Zone Name
|
|
FineStorage Air Node, !- Zone Node Name
|
|
FineStorage Direct Air Inlet Node Name, !- Zone Inlet Node Name
|
|
FURNACE_PACU_CAV_2:2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:SingleZone:Reheat,
|
|
SupAirTemp MngrOffice, !- Name
|
|
Temperature, !- Control Variable
|
|
10.0, !- Minimum Supply Air Temperature {C}
|
|
50.0, !- Maximum Supply Air Temperature {C}
|
|
Office, !- Control Zone Name
|
|
Office Air Node, !- Zone Node Name
|
|
Office Direct Air Inlet Node Name, !- Zone Inlet Node Name
|
|
FURNACE_PACU_CAV_1:1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
Sizing:System,
|
|
FURNACE_PACU_CAV_1:1, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
1.0, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
40.0, !- Central Heating Design Supply Air Temperature {C}
|
|
NonCoincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
VAV; !- Central Cooling Capacity Control Method
|
|
|
|
Sizing:System,
|
|
FURNACE_PACU_CAV_2:2, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
1.0, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
12.8000, !- Central Cooling Design Supply Air Temperature {C}
|
|
40.0, !- Central Heating Design Supply Air Temperature {C}
|
|
NonCoincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0080, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
VAV; !- Central Cooling Capacity Control Method
|
|
|
|
Controller:OutdoorAir,
|
|
FURNACE_PACU_CAV_1:1_OA_Controller, !- Name
|
|
FURNACE_PACU_CAV_1:1_OARelief Node, !- Relief Air Outlet Node Name
|
|
FURNACE_PACU_CAV_1:1 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
FURNACE_PACU_CAV_1:1_OA-FURNACE_PACU_CAV_1:1_Unitary_PackageNode, !- Mixed Air Node Name
|
|
FURNACE_PACU_CAV_1:1_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
NoEconomizer, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
-100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
NoLockout, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
, !- Maximum Fraction of Outdoor Air Schedule Name
|
|
; !- Mechanical Ventilation Controller Name
|
|
|
|
Controller:OutdoorAir,
|
|
FURNACE_PACU_CAV_2:2_OA_Controller, !- Name
|
|
FURNACE_PACU_CAV_2:2_OARelief Node, !- Relief Air Outlet Node Name
|
|
FURNACE_PACU_CAV_2:2 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
FURNACE_PACU_CAV_2:2_OA-FURNACE_PACU_CAV_2:2_Unitary_PackageNode, !- Mixed Air Node Name
|
|
FURNACE_PACU_CAV_2:2_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
-100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
NoLockout, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
MinOA_Sched, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
, !- Maximum Fraction of Outdoor Air Schedule Name
|
|
; !- Mechanical Ventilation Controller Name
|
|
|
|
Curve:Quadratic,
|
|
Cool-PLF-fPLR, !- Name
|
|
0.90949556, !- Coefficient1 Constant
|
|
0.09864773, !- Coefficient2 x
|
|
-0.00819488, !- Coefficient3 x**2
|
|
0, !- Minimum Value of x
|
|
1, !- Maximum Value of x
|
|
0.7, !- Minimum Curve Output
|
|
1; !- Maximum Curve Output
|
|
|
|
Curve:Cubic,
|
|
ConstantCubic, !- Name
|
|
1, !- Coefficient1 Constant
|
|
0, !- Coefficient2 x
|
|
0, !- Coefficient3 x**2
|
|
0, !- Coefficient4 x**3
|
|
-100, !- Minimum Value of x
|
|
100; !- Maximum Value of x
|
|
|
|
Curve:Biquadratic,
|
|
Cool-Cap-fT, !- Name
|
|
0.9712123, !- Coefficient1 Constant
|
|
-0.015275502, !- Coefficient2 x
|
|
0.0014434524, !- Coefficient3 x**2
|
|
-0.00039321, !- Coefficient4 y
|
|
-0.0000068364, !- Coefficient5 y**2
|
|
-0.0002905956, !- Coefficient6 x*y
|
|
-100, !- Minimum Value of x
|
|
100, !- Maximum Value of x
|
|
-100, !- Minimum Value of y
|
|
100; !- Maximum Value of y
|
|
|
|
Curve:Biquadratic,
|
|
Cool-EIR-fT, !- Name
|
|
0.28687133, !- Coefficient1 Constant
|
|
0.023902164, !- Coefficient2 x
|
|
-0.000810648, !- Coefficient3 x**2
|
|
0.013458546, !- Coefficient4 y
|
|
0.0003389364, !- Coefficient5 y**2
|
|
-0.0004870044, !- Coefficient6 x*y
|
|
-100, !- Minimum Value of x
|
|
100, !- Maximum Value of x
|
|
-100, !- Minimum Value of y
|
|
100; !- Maximum Value of y
|
|
|
|
!- Stage 1 : Lennox LGE Measured Total Cooling Capacity Function of Temperature Curve
|
|
!- bi-quadratic curve = a + b*wb + c*wb**2 + d*edb + e*edb**2 + f*wb*edb
|
|
!- wb = entering wet-bulb temperature (C)
|
|
!- edb = dry-bulb temperature seen by the condenser (C)
|
|
|
|
Curve:Biquadratic,
|
|
Measured_LowSpeedCoolCapLSFT, !- Name
|
|
0.4136, !- Coefficient1 Constant
|
|
0.03105, !- Coefficient2 x
|
|
0, !- Coefficient3 x**2
|
|
0.006952, !- Coefficient4 y
|
|
-0.00021280, !- Coefficient5 y**2
|
|
0, !- Coefficient6 x*y
|
|
11.1, !- Minimum Value of x
|
|
29.4, !- Maximum Value of x
|
|
10.0, !- Minimum Value of y
|
|
50.3; !- Maximum Value of y
|
|
|
|
!- Stage 2 : Lennox LGE Measured Total Cooling Capacity Function of Temperature Curve
|
|
!- bi-quadratic curve = a + b*wb + c*wb**2 + d*edb + e*edb**2 + f*wb*edb
|
|
!- wb = entering wet-bulb temperature (C)
|
|
!- edb = dry-bulb temperature seen by the condenser (C)
|
|
|
|
Curve:Biquadratic,
|
|
Measured_CoolCStandard10Ton_CapFT, !- Name
|
|
0.52357, !- Coefficient1 Constant
|
|
0.03478, !- Coefficient2 x
|
|
0, !- Coefficient3 x**2
|
|
-0.001915, !- Coefficient4 y
|
|
-0.00010838, !- Coefficient5 y**2
|
|
0, !- Coefficient6 x*y
|
|
11.1, !- Minimum Value of x
|
|
29.4, !- Maximum Value of x
|
|
10.0, !- Minimum Value of y
|
|
50.3; !- Maximum Value of y
|
|
|
|
!- Stage 2 : Lennox LGE Measured Total Cooling Capacity Function of Flow Fraction Curve
|
|
!- quadratic curve = a + b*ff + c*ff**2
|
|
!- ff = fraction of the full load flow
|
|
|
|
Curve:Quadratic,
|
|
Measured_CoolCStandard10Ton_CapFF, !- Name
|
|
0.7685, !- Coefficient1 Constant
|
|
0.2315, !- Coefficient2 x
|
|
0, !- Coefficient3 x**2
|
|
0.776, !- Minimum Value of x
|
|
1.197; !- Maximum Value of x
|
|
|
|
!- Stage 1 : Lennox LGE Measured Energy Input Ratio Function of Temperature Curve
|
|
!- bi-quadratic curve = a + b*wb + c*wb**2 + d*edb + e*edb**2 + f*wb*edb
|
|
!- wb = entering wet-bulb temperature (C)
|
|
!- edb = dry-bulb temperature seen by the condenser (C)
|
|
|
|
Curve:Biquadratic,
|
|
Measured_LowSpeedCoolEIRLSFT, !- Name
|
|
1.1389, !- Coefficient1 Constant
|
|
-0.04518, !- Coefficient2 x
|
|
0.0014298, !- Coefficient3 x**2
|
|
0.006044, !- Coefficient4 y
|
|
0.0006745, !- Coefficient5 y**2
|
|
-0.0012325, !- Coefficient6 x*y
|
|
11.1, !- Minimum Value of x
|
|
29.4, !- Maximum Value of x
|
|
10.0, !- Minimum Value of y
|
|
50.3; !- Maximum Value of y
|
|
|
|
!- Stage 2 : Lennox LGE Measured Energy Input Ratio Function of Temperature Curve
|
|
!- bi-quadratic curve = a + b*wb + c*wb**2 + d*edb + e*edb**2 + f*wb*edb
|
|
!- wb = entering wet-bulb temperature (C)
|
|
!- edb = dry-bulb temperature seen by the condenser (C)
|
|
|
|
Curve:Biquadratic,
|
|
Measured_CoolCStandard10Ton_EIRFT, !- Name
|
|
0.9847, !- Coefficient1 Constant
|
|
-0.04285, !- Coefficient2 x
|
|
0.0013562, !- Coefficient3 x**2
|
|
0.009934, !- Coefficient4 y
|
|
0.0006398, !- Coefficient5 y**2
|
|
-0.0011690, !- Coefficient6 x*y
|
|
11.1, !- Minimum Value of x
|
|
29.4, !- Maximum Value of x
|
|
10.0, !- Minimum Value of y
|
|
50.3; !- Maximum Value of y
|
|
|
|
!- Stage 2 : Lennox LGE Measured Energy Input Ratio Function of Flow Fraction Curve
|
|
!- quadratic curve = a + b*ff + c*ff**2
|
|
!- ff = fraction of the full load flow
|
|
|
|
Curve:Quadratic,
|
|
Measured_CoolCStandard10Ton_EIRFFF, !- Name
|
|
1.192, !- Coefficient1 Constant
|
|
-0.1917, !- Coefficient2 x
|
|
0, !- Coefficient3 x**2
|
|
0.776, !- Minimum Value of x
|
|
1.197; !- Maximum Value of x
|
|
|
|
!- Part Load Fraction Correlation Curve [Assuming no compressor cycling degredation at part loads]
|
|
!- quadratic curve = a + b*PLR + c*PLR**2
|
|
!- PLR = part load ratio (sensible cooling load/steady-state sensible cooling capacity)
|
|
|
|
Curve:Quadratic,
|
|
No_PLR_Degredation, !- Name
|
|
1.0, !- Coefficient1 Constant
|
|
0, !- Coefficient2 x
|
|
0, !- Coefficient3 x**2
|
|
0.0, !- Minimum Value of x
|
|
1.0; !- Maximum Value of x
|
|
|
|
! ***AIR LOOPS***
|
|
|
|
AirLoopHVAC,
|
|
FURNACE_PACU_CAV_1:1, !- Name
|
|
, !- Controller List Name
|
|
FURNACE_PACU_CAV_1:1 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
FURNACE_PACU_CAV_1:1 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
FURNACE_PACU_CAV_1:1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
FURNACE_PACU_CAV_1:1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
FURNACE_PACU_CAV_1:1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
FURNACE_PACU_CAV_1:1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
AirLoopHVAC,
|
|
FURNACE_PACU_CAV_2:2, !- Name
|
|
, !- Controller List Name
|
|
FURNACE_PACU_CAV_2:2 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
FURNACE_PACU_CAV_2:2 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
FURNACE_PACU_CAV_2:2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
FURNACE_PACU_CAV_2:2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
FURNACE_PACU_CAV_2:2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
FURNACE_PACU_CAV_2:2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
AirLoopHVAC:UnitaryHeatCool,
|
|
FURNACE_PACU_CAV_1:1_Unitary_Package, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
FURNACE_PACU_CAV_1:1_OA-FURNACE_PACU_CAV_1:1_Unitary_PackageNode, !- Unitary System Air Inlet Node Name
|
|
FURNACE_PACU_CAV_1:1 Supply Equipment Outlet Node, !- Unitary System Air Outlet Node Name
|
|
HVACOperationSchd, !- Supply Air Fan Operating Mode Schedule Name
|
|
AUTOSIZE, !- Maximum Supply Air Temperature {C}
|
|
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
|
|
Office, !- Controlling Zone or Thermostat Location
|
|
Fan:OnOff, !- Supply Fan Object Type
|
|
FURNACE_PACU_CAV_1:1_Unitary_Package_fan, !- Supply Fan Name
|
|
BlowThrough, !- Fan Placement
|
|
Coil:Heating:Fuel, !- Heating Coil Object Type
|
|
FURNACE_PACU_CAV_1:1_Unitary_Package_HeatCoil, !- Heating Coil Name
|
|
Coil:Cooling:DX:SingleSpeed, !- Cooling Coil Object Type
|
|
FURNACE_PACU_CAV_1:1_Unitary_Package_CoolCoil, !- Cooling Coil Name
|
|
None, !- Dehumidification Control Type
|
|
, !- Reheat Coil Object Type
|
|
; !- Reheat Coil Name
|
|
|
|
AirLoopHVAC:UnitaryHeatCool,
|
|
FURNACE_PACU_CAV_2:2_Unitary_Package, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
FURNACE_PACU_CAV_2:2_OA-FURNACE_PACU_CAV_2:2_Unitary_PackageNode, !- Unitary System Air Inlet Node Name
|
|
FURNACE_PACU_CAV_2:2 Supply Equipment Outlet Node, !- Unitary System Air Outlet Node Name
|
|
HVACOperationSchd, !- Supply Air Fan Operating Mode Schedule Name
|
|
AUTOSIZE, !- Maximum Supply Air Temperature {C}
|
|
AUTOSIZE, !- Cooling Supply Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Heating Supply Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- No Load Supply Air Flow Rate {m3/s}
|
|
FineStorage, !- Controlling Zone or Thermostat Location
|
|
Fan:OnOff, !- Supply Fan Object Type
|
|
FURNACE_PACU_CAV_2:2_Unitary_Package_fan, !- Supply Fan Name
|
|
BlowThrough, !- Fan Placement
|
|
Coil:Heating:Fuel, !- Heating Coil Object Type
|
|
FURNACE_PACU_CAV_2:2_Unitary_Package_HeatCoil, !- Heating Coil Name
|
|
Coil:Cooling:DX:SingleSpeed, !- Cooling Coil Object Type
|
|
FURNACE_PACU_CAV_2:2_Unitary_Package_CoolCoil, !- Cooling Coil Name
|
|
None, !- Dehumidification Control Type
|
|
, !- Reheat Coil Object Type
|
|
; !- Reheat Coil Name
|
|
|
|
! ***CONNECTIONS***
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
BulkStorage, !- Zone Name
|
|
BulkStorage Equipment, !- Zone Conditioning Equipment List Name
|
|
BulkStorage Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
BulkStorage Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
BulkStorage Air Node, !- Zone Air Node Name
|
|
BulkStorage Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
FineStorage, !- Zone Name
|
|
FineStorage Equipment, !- Zone Conditioning Equipment List Name
|
|
FineStorage Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
FineStorage Air Node, !- Zone Air Node Name
|
|
FineStorage Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Office, !- Zone Name
|
|
Office Equipment, !- Zone Conditioning Equipment List Name
|
|
Office Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Office Air Node, !- Zone Air Node Name
|
|
Office Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
NodeList,
|
|
BulkStorage Exhaust Nodes, !- Name
|
|
BulkStorage Unit Heater Exhaust Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
BulkStorage Inlet Nodes, !- Name
|
|
BulkStorage Unit Heater Inlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
FURNACE_PACU_CAV_1:1_OANode List, !- Name
|
|
FURNACE_PACU_CAV_1:1_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
FURNACE_PACU_CAV_2:2_OANode List, !- Name
|
|
FURNACE_PACU_CAV_2:2_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
FineStorage Inlet Nodes, !- Name
|
|
FineStorage Direct Air Inlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Office Inlet Nodes, !- Name
|
|
Office Direct Air Inlet Node Name; !- Node 1 Name
|
|
|
|
AirTerminal:SingleDuct:ConstantVolume:NoReheat,
|
|
FineStorage Direct Air, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
FineStorage Direct Air Inlet Node Name ATInlet, !- Air Inlet Node Name
|
|
FineStorage Direct Air Inlet Node Name, !- Air Outlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
, !- Design Specification Outdoor Air Object Name
|
|
; !- Per Person Ventilation Rate Mode
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
FineStorage Direct Air ADU, !- Name
|
|
FineStorage Direct Air Inlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:ConstantVolume:NoReheat, !- Air Terminal Object Type
|
|
FineStorage Direct Air, !- Air Terminal Name
|
|
, !- Nominal Upstream Leakage Fraction
|
|
, !- Constant Downstream Leakage Fraction
|
|
; !- Design Specification Air Terminal Sizing Object Name
|
|
|
|
AirTerminal:SingleDuct:ConstantVolume:NoReheat,
|
|
Office Direct Air, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Office Direct Air Inlet Node Name ATInlet, !- Air Inlet Node Name
|
|
Office Direct Air Inlet Node Name, !- Air Outlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
, !- Design Specification Outdoor Air Object Name
|
|
; !- Per Person Ventilation Rate Mode
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Office Direct Air ADU, !- Name
|
|
Office Direct Air Inlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:ConstantVolume:NoReheat, !- Air Terminal Object Type
|
|
Office Direct Air, !- Air Terminal Name
|
|
, !- Nominal Upstream Leakage Fraction
|
|
, !- Constant Downstream Leakage Fraction
|
|
; !- Design Specification Air Terminal Sizing Object Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
FURNACE_PACU_CAV_1:1 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
FURNACE_PACU_CAV_1:1 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
FURNACE_PACU_CAV_2:2 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
FURNACE_PACU_CAV_2:2 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManager:NightCycle,
|
|
FURNACE_PACU_CAV_1:1 Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
FURNACE_PACU_CAV_2:2 Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
BranchList,
|
|
FURNACE_PACU_CAV_1:1 Air Loop Branches, !- Name
|
|
FURNACE_PACU_CAV_1:1 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
FURNACE_PACU_CAV_2:2 Air Loop Branches, !- Name
|
|
FURNACE_PACU_CAV_2:2 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
Branch,
|
|
FURNACE_PACU_CAV_1:1 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
FURNACE_PACU_CAV_1:1_OA, !- Component 1 Name
|
|
FURNACE_PACU_CAV_1:1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
FURNACE_PACU_CAV_1:1_OA-FURNACE_PACU_CAV_1:1_Unitary_PackageNode, !- Component 1 Outlet Node Name
|
|
AirLoopHVAC:UnitaryHeatCool, !- Component 2 Object Type
|
|
FURNACE_PACU_CAV_1:1_Unitary_Package, !- Component 2 Name
|
|
FURNACE_PACU_CAV_1:1_OA-FURNACE_PACU_CAV_1:1_Unitary_PackageNode, !- Component 2 Inlet Node Name
|
|
FURNACE_PACU_CAV_1:1 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
|
|
|
|
Branch,
|
|
FURNACE_PACU_CAV_2:2 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
FURNACE_PACU_CAV_2:2_OA, !- Component 1 Name
|
|
FURNACE_PACU_CAV_2:2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
FURNACE_PACU_CAV_2:2_OA-FURNACE_PACU_CAV_2:2_Unitary_PackageNode, !- Component 1 Outlet Node Name
|
|
AirLoopHVAC:UnitaryHeatCool, !- Component 2 Object Type
|
|
FURNACE_PACU_CAV_2:2_Unitary_Package, !- Component 2 Name
|
|
FURNACE_PACU_CAV_2:2_OA-FURNACE_PACU_CAV_2:2_Unitary_PackageNode, !- Component 2 Inlet Node Name
|
|
FURNACE_PACU_CAV_2:2 Supply Equipment Outlet Node; !- Component 2 Outlet Node Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
FURNACE_PACU_CAV_1:1_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
FURNACE_PACU_CAV_1:1_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
FURNACE_PACU_CAV_2:2_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
FURNACE_PACU_CAV_2:2_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
FURNACE_PACU_CAV_1:1_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
FURNACE_PACU_CAV_1:1_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
FURNACE_PACU_CAV_2:2_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
FURNACE_PACU_CAV_2:2_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
FURNACE_PACU_CAV_1:1_OA, !- Name
|
|
FURNACE_PACU_CAV_1:1_OA_Controllers, !- Controller List Name
|
|
FURNACE_PACU_CAV_1:1_OA_Equipment; !- Outdoor Air Equipment List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
FURNACE_PACU_CAV_2:2_OA, !- Name
|
|
FURNACE_PACU_CAV_2:2_OA_Controllers, !- Controller List Name
|
|
FURNACE_PACU_CAV_2:2_OA_Equipment; !- Outdoor Air Equipment List Name
|
|
|
|
OutdoorAir:NodeList,
|
|
FURNACE_PACU_CAV_1:1_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
FURNACE_PACU_CAV_2:2_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:Mixer,
|
|
FURNACE_PACU_CAV_1:1_OAMixing Box, !- Name
|
|
FURNACE_PACU_CAV_1:1_OA-FURNACE_PACU_CAV_1:1_Unitary_PackageNode, !- Mixed Air Node Name
|
|
FURNACE_PACU_CAV_1:1_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
FURNACE_PACU_CAV_1:1_OARelief Node, !- Relief Air Stream Node Name
|
|
FURNACE_PACU_CAV_1:1 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
FURNACE_PACU_CAV_2:2_OAMixing Box, !- Name
|
|
FURNACE_PACU_CAV_2:2_OA-FURNACE_PACU_CAV_2:2_Unitary_PackageNode, !- Mixed Air Node Name
|
|
FURNACE_PACU_CAV_2:2_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
FURNACE_PACU_CAV_2:2_OARelief Node, !- Relief Air Stream Node Name
|
|
FURNACE_PACU_CAV_2:2 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
SetpointManager:MixedAir,
|
|
FURNACE_PACU_CAV_1:1_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
FURNACE_PACU_CAV_1:1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
FURNACE_PACU_CAV_1:1_OA-FURNACE_PACU_CAV_1:1_Unitary_PackageNode, !- Fan Inlet Node Name
|
|
FURNACE_PACU_CAV_1:1_Unitary_PackageCoolCoil air inlet, !- Fan Outlet Node Name
|
|
FURNACE_PACU_CAV_1:1_OA-FURNACE_PACU_CAV_1:1_Unitary_PackageNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
FURNACE_PACU_CAV_2:2_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
FURNACE_PACU_CAV_2:2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
FURNACE_PACU_CAV_2:2_OA-FURNACE_PACU_CAV_2:2_Unitary_PackageNode, !- Fan Inlet Node Name
|
|
FURNACE_PACU_CAV_2:2_Unitary_PackageCoolCoil air inlet, !- Fan Outlet Node Name
|
|
FURNACE_PACU_CAV_2:2_OA-FURNACE_PACU_CAV_2:2_Unitary_PackageNode; !- Setpoint Node or NodeList Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
FURNACE_PACU_CAV_1:1, !- Name
|
|
FURNACE_PACU_CAV_1:1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
FURNACE_PACU_CAV_1:1 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
FURNACE_PACU_CAV_2:2, !- Name
|
|
FURNACE_PACU_CAV_2:2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
FURNACE_PACU_CAV_2:2 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
FURNACE_PACU_CAV_1:1 Supply Air Splitter, !- Name
|
|
FURNACE_PACU_CAV_1:1 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Office Direct Air Inlet Node Name ATInlet; !- Outlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
FURNACE_PACU_CAV_2:2 Supply Air Splitter, !- Name
|
|
FURNACE_PACU_CAV_2:2 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
FineStorage Direct Air Inlet Node Name ATInlet; !- Outlet 1 Node Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
FURNACE_PACU_CAV_1:1 Return Air Path, !- Name
|
|
FURNACE_PACU_CAV_1:1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
FURNACE_PACU_CAV_1:1 Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
FURNACE_PACU_CAV_2:2 Return Air Path, !- Name
|
|
FURNACE_PACU_CAV_2:2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
FURNACE_PACU_CAV_2:2 Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
FURNACE_PACU_CAV_1:1 Return Air Mixer, !- Name
|
|
FURNACE_PACU_CAV_1:1 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
Office Return Air Node Name; !- Inlet 1 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
FURNACE_PACU_CAV_2:2 Return Air Mixer, !- Name
|
|
FURNACE_PACU_CAV_2:2 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
FineStorage Return Air Node Name; !- Inlet 1 Node Name
|
|
|
|
! ***SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_FineStorage_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,26.7; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 07:00,30.0, !- Field 3
|
|
Until: 17:00,24.0, !- Field 5
|
|
Until: 24:00,30.0, !- Field 7
|
|
For: Saturday, !- Field 9
|
|
Until: 08:00,30.0, !- Field 10
|
|
Until: 16:00,24.0, !- Field 12
|
|
Until: 24:00,30.0, !- Field 14
|
|
For: AllOtherDays, !- Field 16
|
|
Until: 24:00,30.0; !- Field 17
|
|
|
|
Schedule:Compact,
|
|
Dual Zone Control Type Sched, !- Name
|
|
Control Type, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,4; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_BulkStorage_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,7.2; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_FineStorage_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,15.6; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 06:00,15.5, !- Field 3
|
|
Until: 17:00,21.0, !- Field 5
|
|
Until: 24:00,15.5, !- Field 7
|
|
For WinterDesignDay, !- Field 9
|
|
Until: 24:00,21.0, !- Field 10
|
|
For: Saturday, !- Field 12
|
|
Until: 07:00,15.5, !- Field 13
|
|
Until: 16:00,21.0, !- Field 15
|
|
Until: 24:00,15.5, !- Field 17
|
|
For: AllOtherDays, !- Field 19
|
|
Until: 24:00,15.5; !- Field 20
|
|
|
|
Schedule:Compact,
|
|
HVACOperationSchd, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,0.0, !- Field 3
|
|
Until: 17:00,1.0, !- Field 5
|
|
Until: 24:00,0.0, !- Field 7
|
|
For: Saturday WinterDesignDay, !- Field 9
|
|
Until: 07:00,0.0, !- Field 10
|
|
Until: 16:00,1.0, !- Field 12
|
|
Until: 24:00,0.0, !- Field 14
|
|
For: AllOtherDays, !- Field 16
|
|
Until: 24:00,0.0; !- Field 17
|
|
|
|
Schedule:Compact,
|
|
MinOA_Sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 06:00,0.0, !- Field 3
|
|
Until: 17:00,1.0, !- Field 5
|
|
Until: 24:00,0.0, !- Field 7
|
|
For: Saturday WinterDesignDay, !- Field 9
|
|
Until: 07:00,0.0, !- Field 10
|
|
Until: 16:00,1.0, !- Field 12
|
|
Until: 24:00,0.0, !- Field 14
|
|
For: AllOtherDays, !- Field 16
|
|
Until: 24:00,0.0; !- Field 17
|
|
|
|
! ***ECONOMICS***
|
|
! IN_EIAMonthlyRateGas, Source EIA historical Nov2003 thru Oct2004
|
|
! Indiana 1999 state average electricity emissions factors based on eGRID, 1065, AirData
|
|
! PSI_CS_CommercialElectricService, source http://www.cinergypsi.com/pdfs/RateCS.pdf, effective 2004-05-24
|
|
! PSI_LLF_LowLoadFactorService,source http://www.cinergypsi.com/pdfs/RATELLF.pdf, effective 2004-05-24
|
|
|
|
UtilityCost:Tariff,
|
|
PSI_LLF_LowLoadFactorService, !- Name
|
|
Electricity:Facility, !- Output Meter Name
|
|
kWh, !- Conversion Factor Choice
|
|
, !- Energy Conversion Factor
|
|
, !- Demand Conversion Factor
|
|
, !- Time of Use Period Schedule Name
|
|
, !- Season Schedule Name
|
|
, !- Month Schedule Name
|
|
HalfHour, !- Demand Window Length
|
|
15.00, !- Monthly Charge or Variable Name
|
|
, !- Minimum Monthly Charge or Variable Name
|
|
, !- Real Time Pricing Charge Schedule Name
|
|
, !- Customer Baseline Load Schedule Name
|
|
Comm Elect; !- Group Name
|
|
|
|
UtilityCost:Charge:Block,
|
|
AnnualEnergyCharge, !- Utility Cost Charge Block Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
, !- Remaining Into Variable
|
|
, !- Block Size Multiplier Value or Variable Name
|
|
300, !- Block Size 1 Value or Variable Name
|
|
0.108222, !- Block 1 Cost per Unit Value or Variable Name
|
|
700, !- Block Size 2 Value or Variable Name
|
|
0.087021, !- Block 2 Cost per Unit Value or Variable Name
|
|
1500, !- Block Size 3 Value or Variable Name
|
|
0.078420, !- Block 3 Cost per Unit Value or Variable Name
|
|
remaining, !- Block Size 4 Value or Variable Name
|
|
0.058320; !- Block 4 Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Block,
|
|
AnnualDemandBaseCharge, !- Utility Cost Charge Block Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
, !- Remaining Into Variable
|
|
TotalDemand, !- Block Size Multiplier Value or Variable Name
|
|
190, !- Block Size 1 Value or Variable Name
|
|
0.0, !- Block 1 Cost per Unit Value or Variable Name
|
|
110, !- Block Size 2 Value or Variable Name
|
|
0.051773, !- Block 2 Cost per Unit Value or Variable Name
|
|
remaining, !- Block Size 3 Value or Variable Name
|
|
0.046965; !- Block 3 Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
FuelCostAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.002028; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
QualPollutionControlAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000536; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
SoxNoxRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.001127; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
DSMRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000370; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
PurchPowerTrackerAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000031; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
MidwestISOAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000216; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
CleanCoalRiderEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000833; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Qualify,
|
|
MinDemand75kw, !- Utility Cost Qualify Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
TotalDemand, !- Variable Name
|
|
Minimum, !- Qualify Type
|
|
75, !- Threshold Value or Variable Name
|
|
Annual, !- Season
|
|
Count, !- Threshold Test
|
|
12; !- Number of Months
|
|
|
|
UtilityCost:Charge:Simple,
|
|
TaxofeightPercent, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
SubTotal, !- Source Variable
|
|
Annual, !- Season
|
|
Taxes, !- Category Variable Name
|
|
0.08; !- Cost per Unit Value or Variable Name
|
|
|
|
!end PSI_LLF_LowLoadFactorService
|
|
|
|
UtilityCost:Tariff,
|
|
PSI_CS_CommercialElectricService, !- Name
|
|
Electricity:Facility, !- Output Meter Name
|
|
kWh, !- Conversion Factor Choice
|
|
, !- Energy Conversion Factor
|
|
, !- Demand Conversion Factor
|
|
, !- Time of Use Period Schedule Name
|
|
, !- Season Schedule Name
|
|
, !- Month Schedule Name
|
|
, !- Demand Window Length
|
|
9.40, !- Monthly Charge or Variable Name
|
|
, !- Minimum Monthly Charge or Variable Name
|
|
, !- Real Time Pricing Charge Schedule Name
|
|
, !- Customer Baseline Load Schedule Name
|
|
Comm Elect; !- Group Name
|
|
|
|
UtilityCost:Charge:Block,
|
|
AnnualEnergyCharge, !- Utility Cost Charge Block Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
, !- Remaining Into Variable
|
|
, !- Block Size Multiplier Value or Variable Name
|
|
300, !- Block Size 1 Value or Variable Name
|
|
0.082409, !- Block 1 Cost per Unit Value or Variable Name
|
|
700, !- Block Size 2 Value or Variable Name
|
|
0.072873, !- Block 2 Cost per Unit Value or Variable Name
|
|
1500, !- Block Size 3 Value or Variable Name
|
|
0.061696, !- Block 3 Cost per Unit Value or Variable Name
|
|
remaining, !- Block Size 4 Value or Variable Name
|
|
0.041179; !- Block 4 Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
FuelCostAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.002028; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
QualPollutionControlAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000536; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
SoxNoxRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.001127; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
DSMRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000021; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
PurchPowerTrackerAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000034; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
MidwestISOAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000203; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
CleanCoalRiderEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000807; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Qualify,
|
|
MaxDemand75kw, !- Utility Cost Qualify Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
TotalDemand, !- Variable Name
|
|
Maximum, !- Qualify Type
|
|
75, !- Threshold Value or Variable Name
|
|
Annual, !- Season
|
|
Count, !- Threshold Test
|
|
1; !- Number of Months
|
|
|
|
UtilityCost:Charge:Simple,
|
|
TaxofeightPercent, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
SubTotal, !- Source Variable
|
|
Annual, !- Season
|
|
Taxes, !- Category Variable Name
|
|
0.08; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Tariff,
|
|
IN_EIAMonthlyRateGas, !- Name
|
|
NaturalGas:Facility, !- Output Meter Name
|
|
MCF, !- Conversion Factor Choice
|
|
, !- Energy Conversion Factor
|
|
, !- Demand Conversion Factor
|
|
, !- Time of Use Period Schedule Name
|
|
, !- Season Schedule Name
|
|
, !- Month Schedule Name
|
|
, !- Demand Window Length
|
|
0.0, !- Monthly Charge or Variable Name
|
|
, !- Minimum Monthly Charge or Variable Name
|
|
, !- Real Time Pricing Charge Schedule Name
|
|
, !- Customer Baseline Load Schedule Name
|
|
Comm Gas; !- Group Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
MonthlyRateGasCharge, !- Utility Cost Charge Simple Name
|
|
IN_EIAMonthlyRateGas, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
IN_MonthlyGasRates; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Variable,
|
|
IN_MonthlyGasRates, !- Name
|
|
IN_EIAMonthlyRateGas, !- Tariff Name
|
|
Currency, !- Variable Type
|
|
8.22, !- January Value
|
|
7.51, !- February Value
|
|
8.97, !- March Value
|
|
9.01, !- April Value
|
|
9.16, !- May Value
|
|
10.44, !- June Value
|
|
10.32, !- July Value
|
|
10.13, !- August Value
|
|
9.20, !- September Value
|
|
8.18, !- October Value
|
|
7.83, !- November Value
|
|
7.63; !- December Value
|
|
|
|
UtilityCost:Charge:Simple,
|
|
TaxofEightPercent, !- Utility Cost Charge Simple Name
|
|
IN_EIAMonthlyRateGas, !- Tariff Name
|
|
SubTotal, !- Source Variable
|
|
Annual, !- Season
|
|
Taxes, !- Category Variable Name
|
|
0.08; !- Cost per Unit Value or Variable Name
|
|
|
|
! ***GENERAL REPORTING***
|
|
|
|
OutputControl:ReportingTolerances,
|
|
0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC}
|
|
0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC}
|
|
|
|
Output:SQLite,
|
|
Simple; !- Option Type
|
|
|
|
Output:VariableDictionary,IDF,Unsorted;
|
|
|
|
Output:Surfaces:List,Details;
|
|
|
|
Output:Surfaces:Drawing,DXF;
|
|
|
|
Output:Constructions,Constructions;
|
|
|
|
! ***REPORT METERS/VARIABLES***
|
|
|
|
Output:Meter,Electricity:Facility,HOURLY;
|
|
|
|
Output:Meter,Fans:Electricity,HOURLY;
|
|
|
|
Output:Meter,Cooling:Electricity,HOURLY;
|
|
|
|
Output:Meter,Heating:Electricity,HOURLY;
|
|
|
|
Output:Meter,InteriorLights:Electricity,HOURLY;
|
|
|
|
Output:Meter,InteriorEquipment:Electricity,HOURLY;
|
|
|
|
Output:Meter,NaturalGas:Facility,HOURLY;
|
|
|
|
Output:Meter,Heating:NaturalGas,HOURLY;
|
|
|
|
Output:Meter,InteriorEquipment:NaturalGas,HOURLY;
|
|
|
|
Output:Meter,Water Heater:WaterSystems:NaturalGas,HOURLY;
|
|
|
|
Output:Variable,*,Site Outdoor Air Drybulb Temperature,HOURLY;
|
|
|
|
Output:Variable,*,Site Outdoor Air Humidity Ratio,HOURLY;
|
|
|
|
Output:Variable,*,Site Outdoor Air Relative Humidity,HOURLY;
|
|
|
|
Output:Variable,*,Air System Outdoor Air Flow Fraction,HOURLY;
|
|
|
|
Output:Variable,*,Air System Simulation Cycle On Off Status,HOURLY;
|
|
|
|
Output:Variable,*,Air System Outdoor Air Economizer Status,HOURLY;
|
|
|
|
Output:Variable,*,Air System Total Heating Energy,HOURLY;
|
|
|
|
Output:Variable,*,Air System Total Cooling Energy,HOURLY;
|
|
|
|
Output:Variable,*,Air System Fan Electricity Energy,HOURLY;
|
|
|
|
Output:Variable,*,Zone Mean Air Temperature,hourly;
|
|
|
|
! ***REPORT TABLES***
|
|
|
|
OutputControl:Table:Style,
|
|
HTML; !- Column Separator
|
|
|
|
Output:Table:SummaryReports,
|
|
AnnualBuildingUtilityPerformanceSummary, !- Report 1 Name
|
|
InputVerificationandResultsSummary, !- Report 2 Name
|
|
ClimaticDataSummary, !- Report 3 Name
|
|
EnvelopeSummary, !- Report 4 Name
|
|
EquipmentSummary, !- Report 5 Name
|
|
ComponentSizingSummary, !- Report 6 Name
|
|
HVACSizingSummary, !- Report 7 Name
|
|
SystemSummary; !- Report 8 Name
|
|
|
|
Output:Table:Monthly,
|
|
Emissions Data Summary, !- Name
|
|
4, !- Digits After Decimal
|
|
CO2:Facility, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
NOx:Facility, !- Variable or Meter 2 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 2
|
|
SO2:Facility, !- Variable or Meter 3 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 3
|
|
PM:Facility, !- Variable or Meter 4 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 4
|
|
Hg:Facility, !- Variable or Meter 5 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 5
|
|
WaterEnvironmentalFactors:Facility, !- Variable or Meter 6 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 6
|
|
Carbon Equivalent:Facility, !- Variable or Meter 7 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 7
|
|
|
|
Output:Table:Monthly,
|
|
Components of Peak Electrical Demand, !- Name
|
|
3, !- Digits After Decimal
|
|
Electricity:Facility, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Electricity:Facility, !- Variable or Meter 2 Name
|
|
Maximum, !- Aggregation Type for Variable or Meter 2
|
|
InteriorLights:Electricity, !- Variable or Meter 3 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 3
|
|
InteriorEquipment:Electricity, !- Variable or Meter 4 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 4
|
|
Fans:Electricity, !- Variable or Meter 5 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 5
|
|
Heating:Electricity, !- Variable or Meter 6 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 6
|
|
Cooling:Electricity, !- Variable or Meter 7 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 7
|
|
ExteriorLights:Electricity, !- Variable or Meter 8 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 8
|
|
Pumps:Electricity, !- Variable or Meter 9 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 9
|
|
HeatRejection:Electricity, !- Variable or Meter 10 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 10
|
|
ExteriorEquipment:Electricity, !- Variable or Meter 11 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 11
|
|
Humidification:Electricity, !- Variable or Meter 12 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 12
|
|
HeatRecovery:Electricity,!- Variable or Meter 13 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 13
|
|
WaterSystems:Electricity,!- Variable or Meter 14 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 14
|
|
Refrigeration:Electricity, !- Variable or Meter 15 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 15
|
|
Generators:Electricity, !- Variable or Meter 16 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 16
|
|
ElectricityProduced:Facility, !- Variable or Meter 17 Name
|
|
ValueWhenMaximumOrMinimum; !- Aggregation Type for Variable or Meter 17
|
|
|
|
Output:Table:Monthly,
|
|
Heating Part Load Performance, !- Name
|
|
0, !- Digits After Decimal
|
|
Heating Coil NaturalGas Rate, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Heating Coil NaturalGas Rate, !- Variable or Meter 2 Name
|
|
Maximum; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
Cooling Part Load Performance, !- Name
|
|
0, !- Digits After Decimal
|
|
Cooling Coil Electricity Rate, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Cooling Coil Electricity Rate, !- Variable or Meter 2 Name
|
|
Maximum; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
Fan Part Load Performance, !- Name
|
|
0, !- Digits After Decimal
|
|
Fan Electricity Rate, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Fan Electricity Rate, !- Variable or Meter 2 Name
|
|
Maximum; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:TimeBins,
|
|
*, !- Key Value
|
|
Zone Air Relative Humidity, !- Variable Name
|
|
60, !- Interval Start
|
|
10, !- Interval Size
|
|
4; !- Interval Count
|
|
|
|
Output:Table:TimeBins,
|
|
*, !- Key Value
|
|
Air System Outdoor Air Flow Fraction, !- Variable Name
|
|
0.00, !- Interval Start
|
|
0.20, !- Interval Size
|
|
5; !- Interval Count
|
|
|
|
Output:Table:TimeBins,
|
|
*, !- Key Value
|
|
Availability Manager Night Cycle Control Status, !- Variable Name
|
|
0, !- Interval Start
|
|
1, !- Interval Size
|
|
4; !- Interval Count
|
|
|
|
! ***ENVIRONMENTAL FACTORS REPORTING***
|
|
|
|
Output:EnvironmentalImpactFactors,
|
|
Monthly; !- Reporting Frequency
|
|
|
|
EnvironmentalImpactFactors,
|
|
0.663, !- District Heating Efficiency
|
|
4.18, !- District Cooling COP {W/W}
|
|
0.585, !- Steam Conversion Efficiency
|
|
80.7272, !- Total Carbon Equivalent Emission Factor From N2O {kg/kg}
|
|
6.2727, !- Total Carbon Equivalent Emission Factor From CH4 {kg/kg}
|
|
0.2727; !- Total Carbon Equivalent Emission Factor From CO2 {kg/kg}
|
|
|
|
! Indiana electricity source and emission factors based on Deru and Torcellini 2007
|
|
|
|
FuelFactors,
|
|
Electricity, !- Existing Fuel Resource Name
|
|
3.546, !- Source Energy Factor {J/J}
|
|
, !- Source Energy Schedule Name
|
|
3.417E+02, !- CO2 Emission Factor {g/MJ}
|
|
, !- CO2 Emission Factor Schedule Name
|
|
1.186E-01, !- CO Emission Factor {g/MJ}
|
|
, !- CO Emission Factor Schedule Name
|
|
7.472E-01, !- CH4 Emission Factor {g/MJ}
|
|
, !- CH4 Emission Factor Schedule Name
|
|
6.222E-01, !- NOx Emission Factor {g/MJ}
|
|
, !- NOx Emission Factor Schedule Name
|
|
8.028E-03, !- N2O Emission Factor {g/MJ}
|
|
, !- N2O Emission Factor Schedule Name
|
|
1.872E+00, !- SO2 Emission Factor {g/MJ}
|
|
, !- SO2 Emission Factor Schedule Name
|
|
0.0, !- PM Emission Factor {g/MJ}
|
|
, !- PM Emission Factor Schedule Name
|
|
1.739E-02, !- PM10 Emission Factor {g/MJ}
|
|
, !- PM10 Emission Factor Schedule Name
|
|
0.0, !- PM2.5 Emission Factor {g/MJ}
|
|
, !- PM2.5 Emission Factor Schedule Name
|
|
0.0, !- NH3 Emission Factor {g/MJ}
|
|
, !- NH3 Emission Factor Schedule Name
|
|
1.019E-02, !- NMVOC Emission Factor {g/MJ}
|
|
, !- NMVOC Emission Factor Schedule Name
|
|
5.639E-06, !- Hg Emission Factor {g/MJ}
|
|
, !- Hg Emission Factor Schedule Name
|
|
2.778E-05, !- Pb Emission Factor {g/MJ}
|
|
, !- Pb Emission Factor Schedule Name
|
|
0.4309556, !- Water Emission Factor {L/MJ}
|
|
, !- Water Emission Factor Schedule Name
|
|
0, !- Nuclear High Level Emission Factor {g/MJ}
|
|
, !- Nuclear High Level Emission Factor Schedule Name
|
|
0; !- Nuclear Low Level Emission Factor {m3/MJ}
|
|
|
|
! Deru and Torcellini 2007
|
|
! Source Energy and Emission Factors for Energy Use in Buildings
|
|
! NREL/TP-550-38617
|
|
! source factor and Higher Heating Values from Table 5
|
|
! post-combustion emission factors for boiler from Table 9 (with factor of 1000 correction for natural gas)
|
|
|
|
FuelFactors,
|
|
NaturalGas, !- Existing Fuel Resource Name
|
|
1.092, !- Source Energy Factor {J/J}
|
|
, !- Source Energy Schedule Name
|
|
5.21E+01, !- CO2 Emission Factor {g/MJ}
|
|
, !- CO2 Emission Factor Schedule Name
|
|
3.99E-02, !- CO Emission Factor {g/MJ}
|
|
, !- CO Emission Factor Schedule Name
|
|
1.06E-03, !- CH4 Emission Factor {g/MJ}
|
|
, !- CH4 Emission Factor Schedule Name
|
|
4.73E-02, !- NOx Emission Factor {g/MJ}
|
|
, !- NOx Emission Factor Schedule Name
|
|
1.06E-03, !- N2O Emission Factor {g/MJ}
|
|
, !- N2O Emission Factor Schedule Name
|
|
2.68E-04, !- SO2 Emission Factor {g/MJ}
|
|
, !- SO2 Emission Factor Schedule Name
|
|
0.0, !- PM Emission Factor {g/MJ}
|
|
, !- PM Emission Factor Schedule Name
|
|
3.59E-03, !- PM10 Emission Factor {g/MJ}
|
|
, !- PM10 Emission Factor Schedule Name
|
|
0.0, !- PM2.5 Emission Factor {g/MJ}
|
|
, !- PM2.5 Emission Factor Schedule Name
|
|
0, !- NH3 Emission Factor {g/MJ}
|
|
, !- NH3 Emission Factor Schedule Name
|
|
2.61E-03, !- NMVOC Emission Factor {g/MJ}
|
|
, !- NMVOC Emission Factor Schedule Name
|
|
1.11E-07, !- Hg Emission Factor {g/MJ}
|
|
, !- Hg Emission Factor Schedule Name
|
|
2.13E-07, !- Pb Emission Factor {g/MJ}
|
|
, !- Pb Emission Factor Schedule Name
|
|
0, !- Water Emission Factor {L/MJ}
|
|
, !- Water Emission Factor Schedule Name
|
|
0, !- Nuclear High Level Emission Factor {g/MJ}
|
|
, !- Nuclear High Level Emission Factor Schedule Name
|
|
0; !- Nuclear Low Level Emission Factor {m3/MJ}
|
|
|