24768 lines
1.2 MiB
Plaintext
24768 lines
1.2 MiB
Plaintext
!-Generator IDFEditor 1.42
|
|
!-Option OriginalOrderTop UseSpecialFormat
|
|
!-NOTE: All comments with '!-' are ignored by the IDFEditor and are generated automatically.
|
|
!- Use '!' comments if they need to be retained when using the IDFEditor.
|
|
! RefBldgHospitalNew2004_Chicago.idf
|
|
!
|
|
! This example file is based on Version 1.3_5.0 and was transitioned to Version 6.0 using the transition utility
|
|
!
|
|
! DOE Commercial Reference Building
|
|
! Hospital, new construction 90.1-2004
|
|
! Version 1.3_5.0
|
|
! EnergyPlus Version 6.0
|
|
! ASHRAE Standards 90.1-2004 and 62-1999
|
|
!
|
|
! Description: Five story hospital
|
|
! Form: Area = 22,422 m2 (241,351 ft2); Number of Stories = 5 + Basement; Aspect ratio = 1.31
|
|
! Envelope: Envelope thermal properties vary with climate according to ASHRAE Standard 90.1-2004.
|
|
! Opaque constructions: mass walls; built-up flat roof (insulation above deck); basement
|
|
! Windows: window-to-wall ratio = 11.2% (N), 12.1% (E), 13.3% (S), 23.2%(W), 14.6% (overall)
|
|
! Infiltration in perimeter zones only
|
|
! = 0.4 cfm/ft2 above grade wall area at 0.3 in wc (75 Pa) adjusted to 0.016 in wc (4 Pa).
|
|
! 25% of full value when ventilation system on.
|
|
! HVAC: Water cooled electric chiller, natural gas boiler, 2 VAV systems, 2 CAV systems
|
|
! Economizer per 90.1-2004 on VAV systems
|
|
! Chiller part load curve corrected from original
|
|
!
|
|
! Exhaust: Kitchen exhaust 2501 L/s (5300 cfm), 30% of exhaust make-up air from dining
|
|
! Kitchen exhaust fan modeled as exterior load to avoid getting double make-up air
|
|
! Refrigeration: Walk-in cooler and walk-in freezer
|
|
! Elevators: 8 @ 25 HP each, 91% motor efficiency, motor heat exhausted directly
|
|
!
|
|
! Int. gains: W/m2 (W/ft2) lights elec plug gas plug
|
|
! Basement 11.8 (1.1) 8.07 (0.75) 0
|
|
! ER Rooms 29.1 (2.7) 16.0 (1.5) 0
|
|
! Trauma 29.1 (2.7) 43.0 (4.0) 0
|
|
! Triage 29.1 (2.7) 29.1 (2.7) 0
|
|
! OR Rooms 23.7 (2.2) 43.0 (4.0) 0
|
|
! Nurse Stat. 12.7 (1.2) 11.2 (1.0) 0
|
|
! ICU Rooms 8.61 (0.8) 32.3 (3.0) 0
|
|
! Pat. Rooms 7.53 (0.7) 21.5 (2.0) 0
|
|
! Lobby 15.8 (1.5) 1.08 (0.1) 0
|
|
! Corridor 10.7 (1.0) 0.0 (0.0) 0
|
|
! Office 11.8 (1.1) 10.8 (1.0) 0
|
|
! Lab 15.1 (1.4) 43.0 (4.0) 0
|
|
! Kitchen 12.9 (1.2) 80.7 (7.5) 305 (28.3)
|
|
! Dining areas 9.68 (0.9) 10.8 (1.0) 0
|
|
!
|
|
! Detached Shading: None
|
|
! Daylight: None
|
|
! Natural Ventilation: None
|
|
! Zonal Equipment: None
|
|
! Air Primary Loops: VAV with Hot Water Reheat, CAV with Hot Water Reheat
|
|
! Plant Loops: SHWSys1, HeatSys1, CoolSys1, TowerWaterSys
|
|
! System Equipment Autosize: Yes
|
|
! Purchased Cooling: None
|
|
! Purchased Heating: None
|
|
! Coils: Coil:Cooling:Water:DetailedGeometry; Coil:Heating:Water
|
|
! Pumps: Yes
|
|
! Boilers: Boiler:HotWater (gas-fired)
|
|
! Chillers: Chiller:Electric:ReformulatedEIR (water-cooled)
|
|
!***** NOTICE *****
|
|
!***** The Reference Buildings were prepared as an account of work sponsored by an *****
|
|
!***** agency of the United States government. Neither the United States *****
|
|
!***** government nor any agency thereof, nor any of their employees, makes *****
|
|
!***** any warranty, express or implied, or assumes any legal liability or *****
|
|
!***** responsibility for the accuracy, completeness, or usefulness of any *****
|
|
!***** information, apparatus, product, or process disclosed, or represents *****
|
|
!***** that its use would not infringe privately owned rights. Reference *****
|
|
!***** herein to any specific commercial product, process, or service by *****
|
|
!***** trade name, trademark, manufacturer, or otherwise does not necessarily *****
|
|
!***** constitute or imply its endorsement, recommendation, or favoring by *****
|
|
!***** the United States government or any agency thereof. The views and *****
|
|
!***** opinions of authors expressed herein do not necessarily state or *****
|
|
!***** reflect those of the United States government or any agency thereof. *****
|
|
!***** Access to and use of the Reference Buildings imposes the following obligations *****
|
|
!***** on the user. The user agrees to credit DOE, NREL, PNNL, and LBNL in *****
|
|
!***** any publication(s) that that result from the use of Reference Buildings. *****
|
|
!***** However, the names of DOE/NREL/PNNL/LBNL may not be used in any *****
|
|
!***** advertising or publicity that implies endorsement or promotion of any *****
|
|
!***** products, services or commercial entities. *****
|
|
! Reference citation for the Commercial Reference Buildings:
|
|
! Deru, M.; Field, K.; Studer, D.; Benne, K.; Griffith, B.; Torcellini, P;
|
|
! Halverson, M.; Winiarski, D.; Liu, B.; Rosenberg, M.; Huang, J.;
|
|
! Yazdanian, M.; Crawley, D. (2010).
|
|
! U.S. Department of Energy Commercial Reference Building Models of the National Building Stock.
|
|
! Washington, DC: U.S. Department of Energy, Energy Efficiency and
|
|
! Renewable Energy, Office of Building Technologies.
|
|
! ***GENERAL SIMULATION PARAMETERS***
|
|
! Number of Zones: 55
|
|
|
|
Version,25.1;
|
|
|
|
SimulationControl,
|
|
YES, !- Do Zone Sizing Calculation
|
|
YES, !- Do System Sizing Calculation
|
|
YES, !- Do Plant Sizing Calculation
|
|
YES, !- Run Simulation for Sizing Periods
|
|
NO, !- Run Simulation for Weather File Run Periods
|
|
No, !- Do HVAC Sizing Simulation for Sizing Periods
|
|
1; !- Maximum Number of HVAC Sizing Simulation Passes
|
|
|
|
Building,
|
|
Ref Bldg Hospital New2004_v1.3_5.0, !- Name
|
|
0.0000, !- North Axis {deg}
|
|
City, !- Terrain
|
|
0.0400, !- Loads Convergence Tolerance Value {W}
|
|
0.2000, !- Temperature Convergence Tolerance Value {deltaC}
|
|
FullInteriorAndExterior, !- Solar Distribution
|
|
25, !- Maximum Number of Warmup Days
|
|
6; !- Minimum Number of Warmup Days
|
|
|
|
RunPeriod,
|
|
Run Period 1, !- Name
|
|
1, !- Begin Month
|
|
1, !- Begin Day of Month
|
|
, !- Begin Year
|
|
12, !- End Month
|
|
31, !- End Day of Month
|
|
, !- End Year
|
|
Sunday, !- Day of Week for Start Day
|
|
No, !- Use Weather File Holidays and Special Days
|
|
No, !- Use Weather File Daylight Saving Period
|
|
No, !- Apply Weekend Holiday Rule
|
|
Yes, !- Use Weather File Rain Indicators
|
|
Yes; !- Use Weather File Snow Indicators
|
|
|
|
! ***HOLIDAYS & DAYLIGHT SAVINGS***
|
|
|
|
RunPeriodControl:DaylightSavingTime,
|
|
2nd Sunday in March, !- Start Date
|
|
1st Sunday in November; !- End Date
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
New Years Day, !- Name
|
|
January 1, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Veterans Day, !- Name
|
|
November 11, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Christmas, !- Name
|
|
December 25, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Independence Day, !- Name
|
|
July 4, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
MLK Day, !- Name
|
|
3rd Monday in January, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Presidents Day, !- Name
|
|
3rd Monday in February, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Memorial Day, !- Name
|
|
Last Monday in May, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Labor Day, !- Name
|
|
1st Monday in September, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Columbus Day, !- Name
|
|
2nd Monday in October, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Thanksgiving, !- Name
|
|
4th Thursday in November,!- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
! ***SCHEDULE TYPES***
|
|
|
|
ScheduleTypeLimits,
|
|
Any Number; !- Name
|
|
|
|
ScheduleTypeLimits,
|
|
Fraction, !- Name
|
|
0.0, !- Lower Limit Value
|
|
1.0, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Temperature, !- Name
|
|
-60, !- Lower Limit Value
|
|
200, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
On/Off, !- Name
|
|
0, !- Lower Limit Value
|
|
1, !- Upper Limit Value
|
|
DISCRETE; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Control Type, !- Name
|
|
0, !- Lower Limit Value
|
|
4, !- Upper Limit Value
|
|
DISCRETE; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Humidity, !- Name
|
|
10, !- Lower Limit Value
|
|
90, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Number; !- Name
|
|
|
|
! ***ALWAYS ON SCHEDULE***
|
|
|
|
Schedule:Compact,
|
|
ALWAYS_ON, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1; !- Field 3
|
|
|
|
! ***MISC SIMULATION PARAMETERS***
|
|
|
|
SurfaceConvectionAlgorithm:Inside,TARP;
|
|
|
|
SurfaceConvectionAlgorithm:Outside,DOE-2;
|
|
|
|
HeatBalanceAlgorithm,ConductionTransferFunction,200.0000;
|
|
|
|
ZoneAirHeatBalanceAlgorithm,
|
|
AnalyticalSolution; !- Algorithm
|
|
|
|
Sizing:Parameters,
|
|
1.2, !- Heating Sizing Factor
|
|
1.2, !- Cooling Sizing Factor
|
|
4; !- Timesteps in Averaging Window
|
|
|
|
ConvergenceLimits,
|
|
2, !- Minimum System Timestep {minutes}
|
|
25; !- Maximum HVAC Iterations
|
|
|
|
ShadowCalculation,
|
|
PolygonClipping, !- Shading Calculation Method
|
|
Periodic, !- Shading Calculation Update Frequency Method
|
|
7, !- Shading Calculation Update Frequency
|
|
15000; !- Maximum Figures in Shadow Overlap Calculations
|
|
|
|
Timestep,4;
|
|
|
|
! WeatherFileName=USA_IL_Chicago-OHare_TMY2.epw
|
|
|
|
Site:Location,
|
|
USA IL-CHICAGO-OHARE, !- Name
|
|
41.77, !- Latitude {deg}
|
|
-87.75, !- Longitude {deg}
|
|
-6.00, !- Time Zone {hr}
|
|
190; !- Elevation {m}
|
|
|
|
! CHICAGO_IL_USA Annual Heating 99.6%, MaxDB=-20.6°C
|
|
|
|
SizingPeriod:DesignDay,
|
|
CHICAGO Ann Htg 99.6% Condns DB, !- Name
|
|
1, !- Month
|
|
21, !- Day of Month
|
|
WinterDesignDay, !- Day Type
|
|
-20.6, !- Maximum Dry-Bulb Temperature {C}
|
|
0.0, !- Daily Dry-Bulb Temperature Range {deltaC}
|
|
, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Day Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
-20.6, !- Wetbulb or DewPoint at Maximum Dry-Bulb {C}
|
|
, !- Humidity Condition Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily Wet-Bulb Temperature Range {deltaC}
|
|
99063., !- Barometric Pressure {Pa}
|
|
4.9, !- Wind Speed {m/s}
|
|
270, !- Wind Direction {deg}
|
|
No, !- Rain Indicator
|
|
No, !- Snow Indicator
|
|
No, !- Daylight Saving Time Indicator
|
|
ASHRAEClearSky, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless}
|
|
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless}
|
|
0.00; !- Sky Clearness
|
|
|
|
! CHICAGO_IL_USA Annual Cooling (WB=>MDB) .4%, MDB=31.2°C WB=25.5°C
|
|
|
|
SizingPeriod:DesignDay,
|
|
CHICAGO Ann Clg .4% Condns WB=>MDB, !- Name
|
|
7, !- Month
|
|
21, !- Day of Month
|
|
SummerDesignDay, !- Day Type
|
|
31.2, !- Maximum Dry-Bulb Temperature {C}
|
|
10.7, !- Daily Dry-Bulb Temperature Range {deltaC}
|
|
, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Day Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
25.5, !- Wetbulb or DewPoint at Maximum Dry-Bulb {C}
|
|
, !- Humidity Condition Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily Wet-Bulb Temperature Range {deltaC}
|
|
99063., !- Barometric Pressure {Pa}
|
|
5.3, !- Wind Speed {m/s}
|
|
230, !- Wind Direction {deg}
|
|
No, !- Rain Indicator
|
|
No, !- Snow Indicator
|
|
No, !- Daylight Saving Time Indicator
|
|
ASHRAEClearSky, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless}
|
|
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless}
|
|
1.00; !- Sky Clearness
|
|
|
|
Site:WaterMainsTemperature,
|
|
CORRELATION, !- Calculation Method
|
|
, !- Temperature Schedule Name
|
|
9.69, !- Annual Average Outdoor Air Temperature {C}
|
|
28.10; !- Maximum Difference In Monthly Average Outdoor Air Temperatures {deltaC}
|
|
|
|
Site:GroundTemperature:BuildingSurface,19.527,19.502,19.536,19.598,20.002,21.640,22.225,22.375,21.449,20.121,19.802,19.633;
|
|
|
|
! ***OPAQUE CONSTRUCTIONS AND MATERIALS***
|
|
! Exterior Walls
|
|
|
|
Construction,
|
|
Mass Non-res Ext Wall, !- Name
|
|
1IN Stucco, !- Outside Layer
|
|
8IN Concrete HW, !- Layer 2
|
|
Mass NonRes Wall Insulation, !- Layer 3
|
|
1/2IN Gypsum; !- Layer 4
|
|
|
|
Material,
|
|
Mass NonRes Wall Insulation, !- Name
|
|
MediumRough, !- Roughness
|
|
0.0495494599433393, !- Thickness {m}
|
|
0.049, !- Conductivity {W/m-K}
|
|
265.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! Roof
|
|
|
|
Construction,
|
|
IEAD Non-res Roof, !- Name
|
|
Roof Membrane, !- Outside Layer
|
|
IEAD NonRes Roof Insulation, !- Layer 2
|
|
Metal Decking; !- Layer 3
|
|
|
|
Material,
|
|
IEAD NonRes Roof Insulation, !- Name
|
|
MediumRough, !- Roughness
|
|
0.127338688569477, !- Thickness {m}
|
|
0.049, !- Conductivity {W/m-K}
|
|
265.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! Slab on grade, unheated
|
|
|
|
Construction,
|
|
ext-slab, !- Name
|
|
HW CONCRETE; !- Outside Layer
|
|
|
|
! Interior Walls
|
|
|
|
Construction,
|
|
int-walls, !- Name
|
|
1/2IN Gypsum, !- Outside Layer
|
|
1/2IN Gypsum; !- Layer 2
|
|
|
|
! Interior Floors
|
|
|
|
Construction,
|
|
INT-FLOOR-TOPSIDE, !- Name
|
|
MAT-CC05 4 HW CONCRETE, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
Construction,
|
|
INT-FLOOR-UNDERSIDE, !- Name
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
MAT-CC05 4 HW CONCRETE; !- Layer 2
|
|
|
|
Construction,
|
|
Underground Wall Non-res,!- Name
|
|
8IN Concrete HW, !- Outside Layer
|
|
UGWall NonRes Insulation;!- Layer 2
|
|
|
|
Material,
|
|
UGWall NonRes Insulation,!- Name
|
|
MediumRough, !- Roughness
|
|
0.0001, !- Thickness {m}
|
|
0.049, !- Conductivity {W/m-K}
|
|
265.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! ***WINDOW/DOOR CONSTRUCTIONS AND MATERIALS***
|
|
|
|
Construction,
|
|
Window Non-res Fixed, !- Name
|
|
NonRes Fixed Assembly Window; !- Outside Layer
|
|
|
|
WindowMaterial:SimpleGlazingSystem,
|
|
NonRes Fixed Assembly Window, !- Name
|
|
3.23646, !- U-Factor {W/m2-K}
|
|
0.39; !- Solar Heat Gain Coefficient
|
|
|
|
Construction,
|
|
Window Res Fixed, !- Name
|
|
Res Fixed Assembly Window; !- Outside Layer
|
|
|
|
WindowMaterial:SimpleGlazingSystem,
|
|
Res Fixed Assembly Window, !- Name
|
|
3.23646, !- U-Factor {W/m2-K}
|
|
0.39; !- Solar Heat Gain Coefficient
|
|
|
|
! ***COMMON CONSTRUCTIONS AND MATERIALS***
|
|
|
|
Construction,
|
|
AIR-WALL, !- Name
|
|
MAT-AIR-WALL; !- Outside Layer
|
|
|
|
Construction,
|
|
InteriorFurnishings, !- Name
|
|
Std Wood 6inch; !- Outside Layer
|
|
|
|
Material,
|
|
Std Wood 6inch, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.15, !- Thickness {m}
|
|
0.12, !- Conductivity {W/m-K}
|
|
540.0000, !- Density {kg/m3}
|
|
1210, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.7000000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Wood Siding, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0100, !- Thickness {m}
|
|
0.1100, !- Conductivity {W/m-K}
|
|
544.6200, !- Density {kg/m3}
|
|
1210.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7800, !- Solar Absorptance
|
|
0.7800; !- Visible Absorptance
|
|
|
|
Material,
|
|
1/2IN Gypsum, !- Name
|
|
Smooth, !- Roughness
|
|
0.0127, !- Thickness {m}
|
|
0.1600, !- Conductivity {W/m-K}
|
|
784.9000, !- Density {kg/m3}
|
|
830.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.9200, !- Solar Absorptance
|
|
0.9200; !- Visible Absorptance
|
|
|
|
Material,
|
|
1IN Stucco, !- Name
|
|
Smooth, !- Roughness
|
|
0.0253, !- Thickness {m}
|
|
0.6918, !- Conductivity {W/m-K}
|
|
1858.0000, !- Density {kg/m3}
|
|
837.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.9200, !- Solar Absorptance
|
|
0.9200; !- Visible Absorptance
|
|
|
|
Material,
|
|
8IN CONCRETE HW, !- Name
|
|
Rough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
1.3110, !- Conductivity {W/m-K}
|
|
2240.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Metal Siding, !- Name
|
|
Smooth, !- Roughness
|
|
0.0015, !- Thickness {m}
|
|
44.9600, !- Conductivity {W/m-K}
|
|
7688.8600, !- Density {kg/m3}
|
|
410.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.2000, !- Solar Absorptance
|
|
0.2000; !- Visible Absorptance
|
|
|
|
Material,
|
|
HW CONCRETE, !- Name
|
|
Rough, !- Roughness
|
|
0.1016, !- Thickness {m}
|
|
1.3110, !- Conductivity {W/m-K}
|
|
2240.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
CP02 CARPET PAD, !- Name
|
|
VeryRough, !- Roughness
|
|
0.2165, !- Thermal Resistance {m2-K/W}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.8000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Roof Membrane, !- Name
|
|
VeryRough, !- Roughness
|
|
0.0095, !- Thickness {m}
|
|
0.1600, !- Conductivity {W/m-K}
|
|
1121.2900, !- Density {kg/m3}
|
|
1460.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Metal Decking, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0015, !- Thickness {m}
|
|
45.0060, !- Conductivity {W/m-K}
|
|
7680.0000, !- Density {kg/m3}
|
|
418.4000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.3000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Metal Roofing, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0015, !- Thickness {m}
|
|
45.0060, !- Conductivity {W/m-K}
|
|
7680.0000, !- Density {kg/m3}
|
|
418.4000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.3000; !- Visible Absorptance
|
|
|
|
Material,
|
|
MAT-CC05 4 HW CONCRETE, !- Name
|
|
Rough, !- Roughness
|
|
0.1016, !- Thickness {m}
|
|
1.3110, !- Conductivity {W/m-K}
|
|
2240.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! Acoustic tile for drop ceiling
|
|
|
|
Material,
|
|
Std AC02, !- Name
|
|
MediumSmooth, !- Roughness
|
|
1.2700000E-02, !- Thickness {m}
|
|
5.7000000E-02, !- Conductivity {W/m-K}
|
|
288.0000, !- Density {kg/m3}
|
|
1339.000, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.2000000; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
MAT-AIR-WALL, !- Name
|
|
Rough, !- Roughness
|
|
0.2079491, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7; !- Solar Absorptance
|
|
|
|
! ZONE LIST:
|
|
! Basement
|
|
! Corridor_Flr_1
|
|
! Corridor_Flr_2
|
|
! Corridor_Flr_5
|
|
! Corridor_NW_Flr_3
|
|
! Corridor_NW_Flr_4
|
|
! Corridor_SE_Flr_3
|
|
! Corridor_SE_Flr_4
|
|
! Dining_Flr_5
|
|
! ER_Exam1_Mult4_Flr_1
|
|
! ER_Exam3_Mult4_Flr_1
|
|
! ER_NurseStn_Lobby_Flr_1
|
|
! ER_Trauma1_Flr_1
|
|
! ER_Trauma2_Flr_1
|
|
! ER_Triage_Mult4_Flr_1
|
|
! ICU_Flr_2
|
|
! ICU_NurseStn_Lobby_Flr_2
|
|
! IC_PatRoom1_Mult5_Flr_2
|
|
! IC_PatRoom2_Flr_2
|
|
! IC_PatRoom3_Mult6_Flr_2
|
|
! Kitchen_Flr_5
|
|
! Lab_Flr_3
|
|
! Lab_Flr_4
|
|
! Lobby_Records_Flr_1
|
|
! NurseStn_Lobby_Flr_3
|
|
! NurseStn_Lobby_Flr_4
|
|
! NurseStn_Lobby_Flr_5
|
|
! OR1_Flr_2
|
|
! OR2_Mult5_Flr_2
|
|
! OR3_Flr_2
|
|
! OR4_Flr_2
|
|
! OR_NurseStn_Lobby_Flr_2
|
|
! Office1_Flr_5
|
|
! Office1_Mult4_Flr_1
|
|
! Office2_Mult5_Flr_5
|
|
! Office3_Flr_5
|
|
! Office4_Mult6_Flr_5
|
|
! PatRoom1_Mult10_Flr_3
|
|
! PatRoom1_Mult10_Flr_4
|
|
! PatRoom2_Flr_3
|
|
! PatRoom2_Flr_4
|
|
! PatRoom3_Mult10_Flr_3
|
|
! PatRoom3_Mult10_Flr_4
|
|
! PatRoom4_Flr_3
|
|
! PatRoom4_Flr_4
|
|
! PatRoom5_Mult10_Flr_3
|
|
! PatRoom5_Mult10_Flr_4
|
|
! PatRoom6_Flr_3
|
|
! PatRoom6_Flr_4
|
|
! PatRoom7_Mult10_Flr_3
|
|
! PatRoom7_Mult10_Flr_4
|
|
! PatRoom8_Flr_3
|
|
! PatRoom8_Flr_4
|
|
! PhysTherapy_Flr_3
|
|
! Radiology_Flr_4
|
|
! ***ZONES***
|
|
|
|
Zone,
|
|
Basement, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Corridor_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Corridor_Flr_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Corridor_Flr_5, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Corridor_NW_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Corridor_NW_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Corridor_SE_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Corridor_SE_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Dining_Flr_5, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
ER_Exam1_Mult4_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
4, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
ER_Exam3_Mult4_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
4, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
ER_NurseStn_Lobby_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
ER_Trauma1_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
ER_Trauma2_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
ER_Triage_Mult4_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
4, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
ICU_Flr_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
ICU_NurseStn_Lobby_Flr_2,!- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
IC_PatRoom1_Mult5_Flr_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
5, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
IC_PatRoom2_Flr_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
IC_PatRoom3_Mult6_Flr_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
6, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Kitchen_Flr_5, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Lab_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Lab_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Lobby_Records_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
NurseStn_Lobby_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
NurseStn_Lobby_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
NurseStn_Lobby_Flr_5, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
OR1_Flr_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
OR2_Mult5_Flr_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
5, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
OR3_Flr_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
OR4_Flr_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
OR_NurseStn_Lobby_Flr_2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Office1_Flr_5, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Office1_Mult4_Flr_1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
4, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Office2_Mult5_Flr_5, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
5, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Office3_Flr_5, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Office4_Mult6_Flr_5, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
6, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom1_Mult10_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom1_Mult10_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom2_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom2_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom3_Mult10_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom3_Mult10_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom4_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom4_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom5_Mult10_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom5_Mult10_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom6_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom6_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom7_Mult10_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom7_Mult10_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
10, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom8_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PatRoom8_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
PhysTherapy_Flr_3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Radiology_Flr_4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
! ***WALLS***
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Basement_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,53.3400,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,53.3400,-2.4390, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,53.3400,-2.4390; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Underground Wall Non-res,!- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,53.3400,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.3400,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Underground Wall Non-res,!- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,53.3400,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,53.3400,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,53.3400,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,53.3400,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Underground Wall Non-res,!- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,0.0000,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Basement_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Underground Wall Non-res,!- Construction Name
|
|
Basement, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,53.3400,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,53.3400,-2.4390, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,-2.4390, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Corridor_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Corridor_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,53.3400,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_1_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,15.2400,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,15.2400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_1_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,15.2400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,15.2400,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_1_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_1_Wall_East,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Corridor_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Corridor_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Corridor_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_2_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Corridor_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_2_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_2_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_2_Wall_East,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Corridor_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Corridor_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_2_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_2_Wall_West,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,0.0000,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_5_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Corridor_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
9.1440,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,0.0000,21.3415, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,42.6720,21.3415, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,42.6720,21.3415, !- X,Y,Z ==> Vertex 4 {m}
|
|
39.6240,53.3400,21.3415, !- X,Y,Z ==> Vertex 5 {m}
|
|
27.4320,53.3400,21.3415, !- X,Y,Z ==> Vertex 6 {m}
|
|
27.4320,48.7680,21.3415, !- X,Y,Z ==> Vertex 7 {m}
|
|
9.1440,48.7680,21.3415; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Corridor_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_5_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
9.1440,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
27.4320,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
27.4320,53.3400,17.0732, !- X,Y,Z ==> Vertex 4 {m}
|
|
39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 5 {m}
|
|
39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 6 {m}
|
|
15.2400,42.6720,17.0732, !- X,Y,Z ==> Vertex 7 {m}
|
|
15.2400,0.0000,17.0732; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_5_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Flr_5_Wall_West,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,42.6720,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_5_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Corridor_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
27.4320,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
27.4320,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_5_Wall_1_South, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Flr_5_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,42.6720,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,42.6720,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,42.6720,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_5_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_5_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,48.7680,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_5_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Kitchen_Flr_5_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,42.6720,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_5_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_5_Wall_2_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
27.4320,48.7680,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
27.4320,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,48.7680,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_5_Wall_2_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Corridor_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_Flr_5_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_5_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
27.4320,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
27.4320,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
27.4320,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
27.4320,48.7680,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 4 {m}
|
|
65.5320,48.7680,12.8049, !- X,Y,Z ==> Vertex 5 {m}
|
|
39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 6 {m}
|
|
39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 7 {m}
|
|
28.9560,53.3400,12.8049, !- X,Y,Z ==> Vertex 8 {m}
|
|
28.9560,48.7680,12.8049, !- X,Y,Z ==> Vertex 9 {m}
|
|
4.5720,48.7680,12.8049; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
4.5720,10.6680,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,53.3400,8.5366, !- X,Y,Z ==> Vertex 4 {m}
|
|
39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 5 {m}
|
|
39.6240,48.7680,8.5366, !- X,Y,Z ==> Vertex 6 {m}
|
|
65.5320,48.7680,8.5366, !- X,Y,Z ==> Vertex 7 {m}
|
|
65.5320,42.6720,8.5366, !- X,Y,Z ==> Vertex 8 {m}
|
|
9.1440,42.6720,8.5366, !- X,Y,Z ==> Vertex 9 {m}
|
|
9.1440,10.6680,8.5366; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_3_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,33.5820,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,33.5820,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_1_South, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_5_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_2_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_2_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PhysTherapy_Flr_3_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_3_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_3_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_3_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_3_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_3_South, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_3_Wall_2_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_4_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_3_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,33.5820,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,33.5820,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_4_South, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Wall_3_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_3_Wall_5_South, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_1_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
4.5720,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,10.6680,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,42.6720,17.0732, !- X,Y,Z ==> Vertex 4 {m}
|
|
65.5320,48.7680,17.0732, !- X,Y,Z ==> Vertex 5 {m}
|
|
39.6240,48.7680,17.0732, !- X,Y,Z ==> Vertex 6 {m}
|
|
39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 7 {m}
|
|
28.9560,53.3400,17.0732, !- X,Y,Z ==> Vertex 8 {m}
|
|
28.9560,48.7680,17.0732, !- X,Y,Z ==> Vertex 9 {m}
|
|
4.5720,48.7680,17.0732; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,53.3400,12.8049, !- X,Y,Z ==> Vertex 4 {m}
|
|
39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 5 {m}
|
|
39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 6 {m}
|
|
65.5320,48.7680,12.8049, !- X,Y,Z ==> Vertex 7 {m}
|
|
65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 8 {m}
|
|
9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 9 {m}
|
|
9.1440,10.6680,12.8049; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_4_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,33.5820,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,33.5820,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_1_South, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_5_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_2_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_2_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Radiology_Flr_4_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_3_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_3_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_3_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_3_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_3_South, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_4_Wall_2_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_4_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_4_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,33.5820,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,33.5820,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_4_South, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Wall_3_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_NW_Flr_4_Wall_5_South, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_1_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 4 {m}
|
|
39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 5 {m}
|
|
65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 6 {m}
|
|
65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 7 {m}
|
|
60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 8 {m}
|
|
60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 9 {m}
|
|
4.5720,10.6680,12.8049; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
4.5720,4.5720,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 4 {m}
|
|
65.5320,42.6720,8.5366, !- X,Y,Z ==> Vertex 5 {m}
|
|
65.5320,4.5720,8.5366, !- X,Y,Z ==> Vertex 6 {m}
|
|
39.6240,4.5720,8.5366, !- X,Y,Z ==> Vertex 7 {m}
|
|
39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 8 {m}
|
|
28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 9 {m}
|
|
28.9560,4.5720,8.5366; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_3_Wall_1_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Wall_1_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PhysTherapy_Flr_3_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Wall_2_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Wall_2_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_3_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Wall_3_North, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_4_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Wall_3_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Wall_3_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Wall_3_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Wall_3_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_3_Wall_4_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Wall_4_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
4.5720,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,4.5720,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 4 {m}
|
|
39.6240,4.5720,17.0732, !- X,Y,Z ==> Vertex 5 {m}
|
|
65.5320,4.5720,17.0732, !- X,Y,Z ==> Vertex 6 {m}
|
|
65.5320,42.6720,17.0732, !- X,Y,Z ==> Vertex 7 {m}
|
|
60.9600,42.6720,17.0732, !- X,Y,Z ==> Vertex 8 {m}
|
|
60.9600,10.6680,17.0732, !- X,Y,Z ==> Vertex 9 {m}
|
|
4.5720,10.6680,17.0732; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 4 {m}
|
|
65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 5 {m}
|
|
65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 6 {m}
|
|
39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 7 {m}
|
|
39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 8 {m}
|
|
28.9560,0.0000,12.8049, !- X,Y,Z ==> Vertex 9 {m}
|
|
28.9560,4.5720,12.8049; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_4_Wall_1_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Wall_1_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Radiology_Flr_4_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_4_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Wall_2_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Wall_2_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_4_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Wall_3_North, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_4_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Wall_3_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Wall_3_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Wall_3_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Wall_3_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Corridor_SE_Flr_4_Wall_4_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Wall_4_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Dining_Flr_5_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Dining_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,21.3415, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,22.8600,21.3415, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,22.8600,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Dining_Flr_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Dining_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Dining_Flr_5_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Dining_Flr_5_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Dining_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,22.8600,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Dining_Flr_5_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Dining_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Kitchen_Flr_5_Wall_South,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,22.8600,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,22.8600,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Dining_Flr_5_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Dining_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Dining_Flr_5_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Dining_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Flr_5_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,22.8600,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam1_Mult4_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam1_Mult4_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.7200,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.7200,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam1_Mult4_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam1_Mult4_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.7200,4.5720,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,4.5720,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam1_Mult4_Flr_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam1_Mult4_Flr_1_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.7200,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.7200,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.7200,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam1_Mult4_Flr_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam1_Mult4_Flr_1_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.7200,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7200,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam1_Mult4_Flr_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.7200,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.7200,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam1_Mult4_Flr_1_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam1_Mult4_Flr_1_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam2_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
ER_Trauma1_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam2_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam2_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
ER_Trauma1_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam2_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,4.5720,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,4.5720,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam2_Flr_1_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
ER_Trauma1_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam2_Flr_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Trauma1_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam2_Flr_1_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam2_Flr_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
ER_Trauma1_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam2_Flr_1_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Trauma1_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam2_Flr_1_Wall_West,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam3_Mult4_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam3_Mult4_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,9.1440,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,4.5720,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,4.5720,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,9.1440,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam3_Mult4_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam3_Mult4_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,9.1440,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,9.1440,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam3_Mult4_Flr_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,9.1440,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam3_Mult4_Flr_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam3_Mult4_Flr_1_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,9.1440,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,9.1440,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam3_Mult4_Flr_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam3_Mult4_Flr_1_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam3_Mult4_Flr_1_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam3_Mult4_Flr_1_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,9.1440,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam4_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
ER_Trauma2_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam4_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam4_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
ER_Trauma2_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam4_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,53.3400,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,53.3400,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam4_Flr_1_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
ER_Trauma2_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam4_Flr_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
ER_Trauma2_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam4_Flr_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Trauma2_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam4_Flr_1_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam4_Flr_1_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Trauma2_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam4_Flr_1_Wall_West,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam5_Mult4_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam5_Mult4_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.7200,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.7200,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam5_Mult4_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam5_Mult4_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.7200,53.3400,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7200,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam5_Mult4_Flr_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam5_Mult4_Flr_1_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.7200,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7200,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.7200,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.7200,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam5_Mult4_Flr_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
45.7200,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
45.7200,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam5_Mult4_Flr_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam5_Mult4_Flr_1_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
45.7200,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
45.7200,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_Exam5_Mult4_Flr_1_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_Exam5_Mult4_Flr_1_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_NurseStat_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_NurseStat_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
39.6240,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,4.5720,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,13.7160,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,13.7160,4.2683, !- X,Y,Z ==> Vertex 4 {m}
|
|
70.1040,39.6240,4.2683, !- X,Y,Z ==> Vertex 5 {m}
|
|
64.0080,39.6240,4.2683, !- X,Y,Z ==> Vertex 6 {m}
|
|
64.0080,48.7680,4.2683, !- X,Y,Z ==> Vertex 7 {m}
|
|
39.6240,48.7680,4.2683; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_NurseStat_Flr_1_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_NurseStat_Flr_1_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
39.6240,4.5720,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,39.6240,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
70.1040,39.6240,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
70.1040,13.7160,0.0000, !- X,Y,Z ==> Vertex 6 {m}
|
|
64.0080,13.7160,0.0000, !- X,Y,Z ==> Vertex 7 {m}
|
|
64.0080,4.5720,0.0000; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_NurseStat_Flr_1_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,13.7160,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,13.7160,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,39.6240,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,39.6240,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_NurseStat_Flr_1_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_NurseStat_Flr_1_Wall_1_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_NurseStat_Flr_1_Wall_1_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_NurseStat_Flr_1_Wall_1_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_NurseStat_Flr_1_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_NurseStat_Flr_1_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,48.7680,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_NurseStat_Flr_1_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_NurseStat_Flr_1_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,13.7160,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,13.7160,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_NurseStat_Flr_1_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_NurseStat_Flr_1_Wall_2_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,39.6240,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,39.6240,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,39.6240,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,39.6240,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_NurseStat_Flr_1_Wall_2_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_NurseStat_Flr_1_Wall_2_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,13.7160,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,13.7160,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,13.7160,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,13.7160,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ER_NurseStat_Flr_1_Wall_3_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ER_NurseStat_Flr_1_Wall_3_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
64.0080,39.6240,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
64.0080,39.6240,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
64.0080,48.7680,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
64.0080,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ICU_Flr_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
ICU_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ICU_Flr_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,21.3415,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,21.3415,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ICU_Flr_2_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
ICU_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ICU_Flr_2_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,21.3415,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,21.3415,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ICU_Flr_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ICU_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ICU_Flr_2_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,21.3415,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,21.3415,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ICU_Flr_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ICU_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ICU_Flr_2_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,21.3415,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,21.3415,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,21.3415,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,21.3415,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ICU_Flr_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
ICU_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,0.0000,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ICU_Flr_2_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
ICU_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,21.3415,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,21.3415,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ICU_NurseSat_Flr_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ICU_NurseSat_Flr_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,21.3415,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,21.3415,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ICU_NurseSat_Flr_2_Floor,!- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ICU_NurseSat_Flr_2_Floor,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,21.3415,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,21.3415,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ICU_NurseSat_Flr_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ICU_NurseSat_Flr_2_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,21.3415,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,21.3415,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ICU_NurseSat_Flr_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ICU_NurseSat_Flr_2_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ICU_NurseSat_Flr_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ICU_NurseSat_Flr_2_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,21.3415,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,21.3415,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,21.3415,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,21.3415,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ICU_NurseSat_Flr_2_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ICU_NurseSat_Flr_2_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,21.3415,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,21.3415,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom1_Mult5_Flr_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom1_Mult5_Flr_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
24.3840,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
24.3840,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom1_Mult5_Flr_2_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom1_Mult5_Flr_2_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
24.3840,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
24.3840,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom1_Mult5_Flr_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom1_Mult5_Flr_2_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom1_Mult5_Flr_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
24.3840,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
24.3840,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom1_Mult5_Flr_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom1_Mult5_Flr_2_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
24.3840,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
24.3840,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom1_Mult5_Flr_2_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom1_Mult5_Flr_2_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
24.3840,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
24.3840,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
24.3840,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
24.3840,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom2_Flr_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
IC_PatRoom2_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom2_Flr_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom2_Flr_2_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
IC_PatRoom2_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom2_Flr_2_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom2_Flr_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
IC_PatRoom2_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom2_Flr_2_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom2_Flr_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
IC_PatRoom2_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom2_Flr_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
IC_PatRoom2_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom2_Flr_2_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom2_Flr_2_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
IC_PatRoom2_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom3_Mult6_Flr_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom3_Mult6_Flr_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,44.1960,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,44.1960,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom3_Mult6_Flr_2_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom3_Mult6_Flr_2_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,48.7680,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,44.1960,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,44.1960,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7680,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom3_Mult6_Flr_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom3_Mult6_Flr_2_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,44.1960,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,44.1960,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom3_Mult6_Flr_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom3_Mult6_Flr_2_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7680,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7680,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom3_Mult6_Flr_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
IC_PatRoom3_Mult6_Flr_2_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,44.1960,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,44.1960,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,44.1960,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,44.1960,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
IC_PatRoom3_Mult6_Flr_2_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7680,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,44.1960,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,44.1960,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_5_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Kitchen_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,22.8600,21.3415, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,22.8600,21.3415, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Kitchen_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Kitchen_Flr_5_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_5_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Kitchen_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Flr_5_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,42.6720,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,22.8600,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_5_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Kitchen_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_5_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,42.6720,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_5_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Kitchen_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,22.8600,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_5_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Kitchen_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Kitchen_Flr_5_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Kitchen_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Dining_Flr_5_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,22.8600,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,22.8600,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Lab_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 4 {m}
|
|
15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 5 {m}
|
|
15.2400,33.5280,12.8049; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Lab_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
9.1440,33.5280,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,33.5280,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,19.8120,8.5366, !- X,Y,Z ==> Vertex 4 {m}
|
|
28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 5 {m}
|
|
9.1440,10.6680,8.5366; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_3_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lab_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_3_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,33.5280,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,33.5280,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_3_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lab_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_3_Wall_2_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,33.5280,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,33.5280,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,33.5280,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_3_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lab_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_3_Wall_3_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_3_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lab_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_3_Wall_3_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lab_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Wall_2_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lab_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_4_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,33.5280,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Lab_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
9.1440,33.5280,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,10.6680,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,10.6680,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,19.8120,17.0732, !- X,Y,Z ==> Vertex 4 {m}
|
|
15.2400,19.8120,17.0732, !- X,Y,Z ==> Vertex 5 {m}
|
|
15.2400,33.5280,17.0732; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Lab_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 4 {m}
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 5 {m}
|
|
9.1440,10.6680,12.8049; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_4_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lab_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_4_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,33.5280,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_4_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lab_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_4_Wall_2_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,33.5280,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,33.5280,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_4_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lab_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_4_Wall_3_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_4_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lab_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_4_Wall_3_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lab_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Wall_2_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lab_Flr_4_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lab_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_4_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,33.5280,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Lobby_Records_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
0.0000,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,4.5720,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
21.3415,4.5720,4.2683, !- X,Y,Z ==> Vertex 4 {m}
|
|
21.3415,0.0000,4.2683, !- X,Y,Z ==> Vertex 5 {m}
|
|
28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 6 {m}
|
|
28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 7 {m}
|
|
0.0000,53.3400,4.2683; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Lobby_Records_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,0.0000,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
21.3415,0.0000,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
21.3415,4.5720,0.0000, !- X,Y,Z ==> Vertex 6 {m}
|
|
6.0960,4.5720,0.0000, !- X,Y,Z ==> Vertex 7 {m}
|
|
6.0960,0.0000,0.0000; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
Lobby_Records_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_1_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,15.2400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,15.2400,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_1_South,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Lobby_Records_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Lobby_Records_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lobby_Records_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_1_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,15.2400,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,15.2400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_2_South,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Lobby_Records_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
21.3415,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
21.3415,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_3_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lobby_Records_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_3_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_3_South,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lobby_Records_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_3_South,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
21.3415,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
21.3415,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_3_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Lobby_Records_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lobby_Flr_1_Wall_3_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
21.3415,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
21.3415,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
21.3415,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
21.3415,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Lobby_Flr_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Lobby_Records_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,53.3400,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,53.3400,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Flr_5_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
NurseStn_Lobby_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,21.3415, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,42.6720,21.3415, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,42.6720,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Flr_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
NurseStn_Lobby_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Flr_5_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,42.6720,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Flr_5_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Dining_Flr_5_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,22.8600,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Flr_5_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Kitchen_Flr_5_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,22.8600,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,22.8600,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,42.6720,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Flr_5_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
NurseStn_Lobby_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_5_Wall_1_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,42.6720,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,42.6720,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,42.6720,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Flr_5_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
NurseStn_Lobby_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Flr_5_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_Flr_5_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,42.6720,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,42.6720,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 4 {m}
|
|
28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 5 {m}
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 6 {m}
|
|
60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 7 {m}
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 8 {m}
|
|
39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 9 {m}
|
|
39.6240,42.6720,12.8049; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
9.1440,42.6720,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 4 {m}
|
|
60.9600,10.6680,8.5366, !- X,Y,Z ==> Vertex 5 {m}
|
|
28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 6 {m}
|
|
28.9560,19.8120,8.5366, !- X,Y,Z ==> Vertex 7 {m}
|
|
15.2400,19.8120,8.5366, !- X,Y,Z ==> Vertex 8 {m}
|
|
15.2400,33.5280,8.5366, !- X,Y,Z ==> Vertex 9 {m}
|
|
9.1440,33.5280,8.5366; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_3_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PhysTherapy_Flr_3_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_3_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PhysTherapy_Flr_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_3_Wall_1_South, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Wall_1_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_3_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,33.5280,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,33.5280,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_3_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,10.6680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_3_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_3_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_3_Wall_2_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_3_Wall_1_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,33.5280,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,33.5280,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,33.5280,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_3_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_3_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,33.5280,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_3_Wall_3_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_3_Wall_2_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_3_Wall_3_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_3_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,10.6680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,10.6680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
9.1440,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,33.5280,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,33.5280,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,19.8120,17.0732, !- X,Y,Z ==> Vertex 4 {m}
|
|
28.9560,19.8120,17.0732, !- X,Y,Z ==> Vertex 5 {m}
|
|
28.9560,10.6680,17.0732, !- X,Y,Z ==> Vertex 6 {m}
|
|
60.9600,10.6680,17.0732, !- X,Y,Z ==> Vertex 7 {m}
|
|
60.9600,19.8120,17.0732, !- X,Y,Z ==> Vertex 8 {m}
|
|
39.6240,19.8120,17.0732, !- X,Y,Z ==> Vertex 9 {m}
|
|
39.6240,42.6720,17.0732; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 4 {m}
|
|
60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 5 {m}
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 6 {m}
|
|
28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 7 {m}
|
|
15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 8 {m}
|
|
15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 9 {m}
|
|
9.1440,33.5280,12.8049; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_4_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Radiology_Flr_4_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_4_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Radiology_Flr_4_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_4_Wall_1_South, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Wall_1_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_4_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,33.5280,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_4_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,10.6680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,10.6680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_4_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
AIR-WALL, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_3_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_4_Wall_2_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_4_Wall_1_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,33.5280,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,33.5280,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,33.5280,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_4_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_4_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,33.5280,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,33.5280,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.2400,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_4_Wall_3_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_4_Wall_2_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.2400,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.2400,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NurseSat_Lobby_Flr_4_Wall_3_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Lab_Flr_4_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
28.9560,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.9560,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
28.9560,10.6680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
28.9560,10.6680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR1_Flr_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
OR1_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR1_Flr_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,47.2440,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,47.2440,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR1_Flr_2_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
OR1_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR1_Flr_2_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR1_Flr_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
OR1_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR1_Flr_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
OR1_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR1_Flr_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR1_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR1_Flr_2_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR1_Flr_2_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR1_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR1_Flr_2_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR2_Mult5_Flr_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
OR2_Mult5_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR2_Mult5_Flr_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,41.1480,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,41.1480,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR2_Mult5_Flr_2_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
OR2_Mult5_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR2_Mult5_Flr_2_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,47.2440,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,41.1480,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,41.1480,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,47.2440,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR2_Mult5_Flr_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
OR2_Mult5_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,41.1480,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,41.1480,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR2_Mult5_Flr_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR2_Mult5_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR2_Mult5_Flr_2_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR2_Mult5_Flr_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR2_Mult5_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR2_Mult5_Flr_2_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,41.1480,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,41.1480,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,41.1480,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,41.1480,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR2_Mult5_Flr_2_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR2_Mult5_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR2_Mult5_Flr_2_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,41.1480,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,41.1480,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR3_Flr_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
OR3_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR3_Flr_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,47.2440,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
48.7680,47.2440,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
48.7680,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR3_Flr_2_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
OR3_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR3_Flr_2_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
48.7680,53.3400,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
48.7680,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR3_Flr_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR3_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR3_Flr_2_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
48.7680,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
48.7680,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
48.7680,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
48.7680,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR3_Flr_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
OR3_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
48.7680,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
48.7680,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR3_Flr_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR3_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR3_Flr_2_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
48.7680,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
48.7680,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR3_Flr_2_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR3_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR3_Flr_2_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR4_Flr_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
OR4_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR4_Flr_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,22.8600,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
48.7680,22.8600,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
48.7680,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR4_Flr_2_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
OR4_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR4_Flr_2_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
48.7680,47.2440,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
48.7680,22.8600,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,22.8600,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,47.2440,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR4_Flr_2_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR4_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR4_Flr_2_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
48.7680,22.8600,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
48.7680,22.8600,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
48.7680,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
48.7680,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR4_Flr_2_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR4_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR4_Flr_2_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
48.7680,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
48.7680,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,47.2440,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,47.2440,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR4_Flr_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR4_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR4_Flr_2_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,22.8600,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,22.8600,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
48.7680,22.8600,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
48.7680,22.8600,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR4_Flr_2_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR4_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR4_Flr_2_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,47.2440,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,47.2440,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,22.8600,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,22.8600,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR_NurseSat_Flr_2_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR_NurseSat_Flr_2_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,16.7640,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,16.7640,8.5366, !- X,Y,Z ==> Vertex 4 {m}
|
|
60.9600,53.3400,8.5366, !- X,Y,Z ==> Vertex 5 {m}
|
|
48.7680,53.3400,8.5366, !- X,Y,Z ==> Vertex 6 {m}
|
|
48.7680,22.8600,8.5366, !- X,Y,Z ==> Vertex 7 {m}
|
|
39.6240,22.8600,8.5366; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR_NurseSat_Flr_2_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR_NurseSat_Flr_2_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,22.8600,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
48.7680,22.8600,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
48.7680,53.3400,4.2683, !- X,Y,Z ==> Vertex 4 {m}
|
|
60.9600,53.3400,4.2683, !- X,Y,Z ==> Vertex 5 {m}
|
|
60.9600,16.7640,4.2683, !- X,Y,Z ==> Vertex 6 {m}
|
|
70.1040,16.7640,4.2683, !- X,Y,Z ==> Vertex 7 {m}
|
|
70.1040,0.0000,4.2683; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR_NurseSat_Flr_2_Wall_1_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR_NurseSat_Flr_2_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,16.7640,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,16.7640,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR_NurseSat_Flr_2_Wall_1_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
48.7680,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
48.7680,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR_NurseSat_Flr_2_Wall_1_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR_NurseSat_Flr_2_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,22.8600,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,22.8600,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR_NurseSat_Flr_2_Wall_2_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR_NurseSat_Flr_2_Wall_2_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,16.7640,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,16.7640,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,53.3400,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR_NurseSat_Flr_2_Wall_2_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR_NurseSat_Flr_2_Wall_2_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
48.7680,22.8600,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
48.7680,22.8600,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,22.8600,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,22.8600,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR_NurseSat_Flr_2_Wall_2_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR_NurseSat_Flr_2_Wall_2_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
48.7680,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
48.7680,53.3400,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
48.7680,22.8600,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
48.7680,22.8600,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR_NurseSat_Flr_2_Wall_3_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
OR_NurseSat_Flr_2_Wall_3_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,16.7640,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,16.7640,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,16.7640,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,16.7640,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
OR_NurseSat_Flr_2_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,0.0000,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office1_Flr_5_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Office1_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.6220,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,21.3415, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,0.0000,21.3415, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,7.6220,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office1_Flr_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Office1_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office1_Flr_5_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,7.6220,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,7.6220,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office1_Flr_5_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office1_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office1_Flr_5_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,7.6220,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,7.6220,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office1_Flr_5_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office1_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office1_Flr_5_Wall_North,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,7.6220,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,7.6220,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,7.6220,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,7.6220,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office1_Flr_5_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Office1_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office1_Flr_5_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Office1_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.6220,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,7.6220,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office1_Mult4_Flr_1_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Office1_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office1_Mult4_Flr_1_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,0.0000,4.2683, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,0.0000,4.2683, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office1_Mult4_Flr_1_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Office1_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office1_Mult4_Flr_1_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,4.5720,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,4.5720,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office1_Mult4_Flr_1_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office1_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office1_Mult4_Flr_1_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office1_Mult4_Flr_1_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office1_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office1_Mult4_Flr_1_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,4.5720,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office1_Mult4_Flr_1_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Office1_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,0.0000,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office1_Mult4_Flr_1_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office1_Mult4_Flr_1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office1_Mult4_Flr_1_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,4.5720,4.2683, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,0.0000,4.2683; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office2_Mult5_Flr_5_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Office2_Mult5_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,15.2400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,7.6200,21.3415, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,7.6200,21.3415, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,15.2400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office2_Mult5_Flr_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Office2_Mult5_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office2_Mult5_Flr_5_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,15.2400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,7.6200,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,7.6200,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,15.2400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office2_Mult5_Flr_5_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office2_Mult5_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office2_Mult5_Flr_5_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,7.6220,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,7.6220,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,15.2400,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,15.2400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office2_Mult5_Flr_5_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office2_Mult5_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office2_Mult5_Flr_5_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,15.2400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,15.2400,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,15.2400,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,15.2400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office2_Mult5_Flr_5_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office2_Mult5_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office2_Mult5_Flr_5_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.6220,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,7.6220,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,7.6220,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,7.6220,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office2_Mult5_Flr_5_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Office2_Mult5_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,15.2400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,15.2400,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,7.6220,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,7.6220,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office3_Flr_5_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Office3_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,45.7200,21.3415, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,45.7200,21.3415, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office3_Flr_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Office3_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office3_Flr_5_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,45.7200,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,45.7200,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office3_Flr_5_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office3_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office3_Flr_5_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,45.7200,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,45.7200,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office3_Flr_5_Wall_North,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Office3_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office3_Flr_5_Wall_South,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office3_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office3_Flr_5_Wall_South,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,45.7200,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,45.7200,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,45.7200,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,45.7200,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office3_Flr_5_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Office3_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,45.7200,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,45.7200,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office4_Mult6_Flr_5_Ceiling, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Office4_Mult6_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,48.7680,21.3415, !- X,Y,Z ==> Vertex 2 {m}
|
|
12.1920,48.7680,21.3415, !- X,Y,Z ==> Vertex 3 {m}
|
|
12.1920,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office4_Mult6_Flr_5_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Office4_Mult6_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office4_Mult6_Flr_5_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
12.1920,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
12.1920,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office4_Mult6_Flr_5_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office4_Mult6_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office4_Mult6_Flr_5_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
12.1920,48.7680,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
12.1920,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
12.1920,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
12.1920,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office4_Mult6_Flr_5_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
Office4_Mult6_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
12.1920,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
12.1920,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,53.3400,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,53.3400,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office4_Mult6_Flr_5_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office4_Mult6_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office4_Mult6_Flr_5_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,48.7680,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
12.1920,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
12.1920,48.7680,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Office4_Mult6_Flr_5_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Office4_Mult6_Flr_5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Office4_Mult6_Flr_5_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
9.1440,53.3400,21.3415, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.1440,53.3400,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.1440,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.1440,48.7680,21.3415; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom1_Mult10_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
44.1960,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
44.1960,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom1_Mult10_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
44.1960,4.5720,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.1960,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,4.5720,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom1_Mult10_Flr_3_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
44.1960,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.1960,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
44.1960,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
44.1960,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom1_Mult10_Flr_3_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
44.1960,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.1960,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
44.1960,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
44.1960,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom1_Mult10_Flr_3_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom1_Mult10_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
44.1960,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
44.1960,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom1_Mult10_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
44.1960,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.1960,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_4_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom1_Mult10_Flr_4_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
44.1960,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.1960,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
44.1960,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
44.1960,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_4_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom1_Mult10_Flr_4_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
44.1960,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.1960,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
44.1960,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
44.1960,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_4_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom1_Mult10_Flr_4_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom2_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom2_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom2_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
62.4840,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.4840,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom2_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom2_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom2_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,4.5720,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.4840,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.4840,4.5720,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom2_Flr_3_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom2_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom2_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom2_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom2_Flr_3_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.4840,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.4840,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom2_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom2_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
62.4840,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.4840,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom2_Flr_3_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom2_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom2_Flr_3_Wall_West,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
62.4840,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.4840,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.4840,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.4840,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom2_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom2_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom2_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
62.4840,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.4840,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom2_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom2_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom2_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.4840,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.4840,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom2_Flr_4_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom2_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom2_Flr_4_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom2_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom2_Flr_4_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.4840,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.4840,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom2_Flr_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom2_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
62.4840,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.4840,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom2_Flr_4_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom2_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom2_Flr_4_Wall_West,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
62.4840,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.4840,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.4840,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.4840,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom3_Mult10_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom3_Mult10_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,8.9920,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,8.9920,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,8.9920,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom3_Mult10_Flr_3_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,8.9920,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,8.9920,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom3_Mult10_Flr_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom3_Mult10_Flr_3_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,8.9920,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom3_Mult10_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,8.9920,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,4.5720,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,4.5720,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,8.9920,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom3_Mult10_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_4_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,8.9920,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,8.9920,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_4_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom3_Mult10_Flr_4_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,8.9920,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,8.9920,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,8.9920,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,8.9920,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom3_Mult10_Flr_4_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_4_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom3_Mult10_Flr_4_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
65.5320,8.9920,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
65.5320,8.9920,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
65.5320,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
65.5320,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom4_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom4_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom4_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
62.4840,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.4840,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom4_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom4_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom4_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.4840,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.4840,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom4_Flr_3_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom4_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom4_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom4_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.4840,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.4840,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom4_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom4_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom4_Flr_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
62.4840,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.4840,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom4_Flr_3_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom4_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom4_Flr_3_Wall_West,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
62.4840,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.4840,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.4840,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.4840,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom4_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom4_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom4_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
62.4840,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.4840,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom4_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom4_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom4_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.4840,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.4840,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom4_Flr_4_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom4_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom4_Flr_4_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom4_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
70.1040,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.4840,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.4840,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom4_Flr_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom4_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom4_Flr_4_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
62.4840,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.4840,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom4_Flr_4_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom4_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom4_Flr_4_Wall_West,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
62.4840,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.4840,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.4840,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.4840,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom5_Mult10_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
44.1960,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
44.1960,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom5_Mult10_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
44.1960,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.1960,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom5_Mult10_Flr_3_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
44.1960,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.1960,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
44.1960,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
44.1960,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
44.1960,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.1960,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom5_Mult10_Flr_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
44.1960,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
44.1960,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom5_Mult10_Flr_3_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom5_Mult10_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
44.1960,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
44.1960,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom5_Mult10_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
44.1960,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.1960,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_4_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom5_Mult10_Flr_4_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
44.1960,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.1960,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
44.1960,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
44.1960,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_4_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
44.1960,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
44.1960,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom5_Mult10_Flr_4_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
44.1960,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
44.1960,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_4_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom5_Mult10_Flr_4_Wall_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom6_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom6_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom6_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom6_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom6_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom6_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,4.5720,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.5720,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom6_Flr_3_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom6_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom6_Flr_3_Wall_East,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom6_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom6_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom6_Flr_3_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom6_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom6_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom6_Flr_3_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom6_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom6_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom6_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom6_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,0.0000,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom6_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom6_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom6_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom6_Flr_4_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom6_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom6_Flr_4_Wall_East,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom6_Flr_4_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom6_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom6_Flr_4_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom6_Flr_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom6_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom6_Flr_4_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom6_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom7_Mult10_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom7_Mult10_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,8.9920,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,8.9920,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom7_Mult10_Flr_3_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,8.9920,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom7_Mult10_Flr_3_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,8.9920,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,8.9920,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom7_Mult10_Flr_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.5720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,8.9920,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.5720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.5720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom7_Mult10_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,8.9920,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.5720,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,4.5720,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,8.9920,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom7_Mult10_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,8.9920,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,8.9920,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_4_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom7_Mult10_Flr_4_Wall_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,8.9920,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,8.9920,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_4_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom7_Mult10_Flr_4_Wall_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,8.9920,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,8.9920,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,8.9920,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,8.9920,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom7_Mult10_Flr_4_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,4.5720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_4_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,8.9920,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,8.9920,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.5720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.5720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom8_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom8_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom8_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom8_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom8_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom8_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,53.3400,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,53.3400,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom8_Flr_3_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom8_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom8_Flr_3_Wall_East,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom8_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom8_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,53.3400,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom8_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom8_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom8_Flr_3_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7680,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom8_Flr_3_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom8_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,53.3400,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7680,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7680,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom8_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PatRoom8_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom8_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7680,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,48.7680,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom8_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PatRoom8_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom8_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,53.3400,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,53.3400,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom8_Flr_4_Wall_East,!- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom8_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom8_Flr_4_Wall_East,!- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom8_Flr_4_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom8_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,53.3400,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,53.3400,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom8_Flr_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PatRoom8_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PatRoom8_Flr_4_Wall_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,48.7680,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.7680,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PatRoom8_Flr_4_Wall_West,!- Name
|
|
Wall, !- Surface Type
|
|
Mass Non-res Ext Wall, !- Construction Name
|
|
PatRoom8_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,53.3400,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,53.3400,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,48.7680,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,48.7680,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PhysTherapy_Flr_3_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
PhysTherapy_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PhysTherapy_Flr_3_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PhysTherapy_Flr_3_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
PhysTherapy_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
PhysTherapy_Flr_3_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,42.6720,8.5366; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PhysTherapy_Flr_3_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PhysTherapy_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_3_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PhysTherapy_Flr_3_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PhysTherapy_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_3_Wall_2_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PhysTherapy_Flr_3_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PhysTherapy_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_3_Wall_1_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,19.8120,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
PhysTherapy_Flr_3_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
PhysTherapy_Flr_3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_3_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,42.6720,8.5366, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,19.8120,8.5366, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,19.8120,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Radiology_Flr_4_Ceiling, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Radiology_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Radiology_Flr_4_Ceiling, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,19.8120,17.0732, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,19.8120,17.0732, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Radiology_Flr_4_Floor, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Radiology_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Radiology_Flr_4_Floor, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,42.6720,12.8049; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Radiology_Flr_4_Wall_East, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Radiology_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_SE_Flr_4_Wall_1_West, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Radiology_Flr_4_Wall_North, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Radiology_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
Corridor_NW_Flr_4_Wall_2_South, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
60.9600,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
60.9600,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,42.6720,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Radiology_Flr_4_Wall_South, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Radiology_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_4_Wall_1_North, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,19.8120,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
60.9600,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
60.9600,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Radiology_Flr_4_Wall_West, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Radiology_Flr_4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
NurseSat_Lobby_Flr_4_Wall_1_East, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
39.6240,42.6720,17.0732, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.6240,42.6720,12.8049, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.6240,19.8120,12.8049, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.6240,19.8120,17.0732; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
! ***WINDOWS & DOORS***
|
|
|
|
FenestrationSurface:Detailed,
|
|
Dining_Flr_5_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Dining_Flr_5_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
40.1950,0.0000,19.2020, !- X,Y,Z ==> Vertex 1 {m}
|
|
40.1950,0.0000,17.9830, !- X,Y,Z ==> Vertex 2 {m}
|
|
69.5330,0.0000,17.9830, !- X,Y,Z ==> Vertex 3 {m}
|
|
69.5330,0.0000,19.2020; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
ER_NurseStat_Flr_1_Wall_1_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
ER_NurseStat_Flr_1_Wall_1_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
70.1040,14.2020,2.1340, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,14.2020,0.9140, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,39.1380,0.9140, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,39.1380,2.1340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
ICU_Flr_2_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
ICU_Flr_2_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,20.9360,6.4010, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,20.9360,5.1820, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.4000,5.1820, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.4000,6.4010; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
IC_PatRoom1_Mult5_Flr_2_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
IC_PatRoom1_Mult5_Flr_2_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
28.6820,53.3400,6.4010, !- X,Y,Z ==> Vertex 1 {m}
|
|
28.6820,53.3400,5.1820, !- X,Y,Z ==> Vertex 2 {m}
|
|
24.6580,53.3400,5.1820, !- X,Y,Z ==> Vertex 3 {m}
|
|
24.6580,53.3400,6.4010; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
IC_PatRoom2_Flr_2_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
IC_PatRoom2_Flr_2_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
5.7300,53.3400,6.4010, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7300,53.3400,5.1820, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.3660,53.3400,5.1820, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.3660,53.3400,6.4010; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
IC_PatRoom2_Flr_2_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
IC_PatRoom2_Flr_2_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,53.0660,6.4010, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,53.0660,5.1820, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,49.0420,5.1820, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,49.0420,6.4010; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
IC_PatRoom3_Mult6_Flr_2_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
IC_PatRoom3_Mult6_Flr_2_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,48.4940,6.4010, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,48.4940,5.1820, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,44.4700,5.1820, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,44.4700,6.4010; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Lobby_Flr_1_Wall_2_West, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Lobby_Flr_1_Wall_1_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,52.3400,2.1340, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,52.3400,0.9140, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,1.0000,0.9140, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,1.0000,2.1340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
OR_NurseSat_Flr_2_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
OR_NurseSat_Flr_2_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
40.1950,0.0000,6.4010, !- X,Y,Z ==> Vertex 1 {m}
|
|
40.1950,0.0000,5.1820, !- X,Y,Z ==> Vertex 2 {m}
|
|
69.5330,0.0000,5.1820, !- X,Y,Z ==> Vertex 3 {m}
|
|
69.5330,0.0000,6.4010; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office1_Flr_5_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Office1_Flr_5_Wall_South,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.5490,0.0000,19.2020, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.5490,0.0000,17.9830, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.5950,0.0000,17.9830, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.5950,0.0000,19.2020; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office1_Flr_5_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Office1_Flr_5_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,7.1630,19.2020, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,7.1630,17.9830, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.4570,17.9830, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.4570,19.2020; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office1_Mult4_Flr_1_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Office1_Mult4_Flr_1_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
6.4050,0.0000,2.1340, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.4050,0.0000,0.9140, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.8350,0.0000,0.9140, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.8350,0.0000,2.1340; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office2_Mult5_Flr_5_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Office2_Mult5_Flr_5_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,14.7830,19.2020, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,14.7830,17.9830, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,8.0770,17.9830, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,8.0770,19.2020; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office3_Flr_5_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Office3_Flr_5_Wall_North,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
8.5950,53.3400,19.2020, !- X,Y,Z ==> Vertex 1 {m}
|
|
8.5950,53.3400,17.9830, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.5490,53.3400,17.9830, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.5490,53.3400,19.2020; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office3_Flr_5_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Office3_Flr_5_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,52.8830,19.2020, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,52.8830,17.9830, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,46.1770,17.9830, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,46.1770,19.2020; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
Office4_Mult6_Flr_5_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
Office4_Mult6_Flr_5_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
11.8830,53.3400,19.2020, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.8830,53.3400,17.9830, !- X,Y,Z ==> Vertex 2 {m}
|
|
9.4530,53.3400,17.9830, !- X,Y,Z ==> Vertex 3 {m}
|
|
9.4530,53.3400,19.2020; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_3_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom1_Mult10_Flr_3_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
39.8980,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.8980,0.0000,9.4490, !- X,Y,Z ==> Vertex 2 {m}
|
|
43.9220,0.0000,9.4490, !- X,Y,Z ==> Vertex 3 {m}
|
|
43.9220,0.0000,10.6680; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom1_Mult10_Flr_4_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom1_Mult10_Flr_4_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
39.8980,0.0000,14.9350, !- X,Y,Z ==> Vertex 1 {m}
|
|
39.8980,0.0000,13.7160, !- X,Y,Z ==> Vertex 2 {m}
|
|
43.9220,0.0000,13.7160, !- X,Y,Z ==> Vertex 3 {m}
|
|
43.9220,0.0000,14.9350; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom2_Flr_3_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom2_Flr_3_Wall_East,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
70.1040,0.2740,10.6680, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.2740,9.4490, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,4.2980,9.4490, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,4.2980,10.6680; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom2_Flr_3_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom2_Flr_3_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
62.9410,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.9410,0.0000,9.4490, !- X,Y,Z ==> Vertex 2 {m}
|
|
69.6470,0.0000,9.4490, !- X,Y,Z ==> Vertex 3 {m}
|
|
69.6470,0.0000,10.6680; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom2_Flr_4_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom2_Flr_4_Wall_East,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
70.1040,0.2740,14.9350, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,0.2740,13.7160, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,4.2980,13.7160, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,4.2980,14.9350; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom2_Flr_4_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom2_Flr_4_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
62.9410,0.0000,14.9350, !- X,Y,Z ==> Vertex 1 {m}
|
|
62.9410,0.0000,13.7160, !- X,Y,Z ==> Vertex 2 {m}
|
|
69.6470,0.0000,13.7160, !- X,Y,Z ==> Vertex 3 {m}
|
|
69.6470,0.0000,14.9350; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_3_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom3_Mult10_Flr_3_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
70.1040,4.8370,10.6680, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,4.8370,9.4490, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,8.7260,9.4490, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,8.7260,10.6680; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom3_Mult10_Flr_4_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom3_Mult10_Flr_4_Wall_East, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
70.1040,4.8370,14.9350, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,4.8370,13.7160, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,8.7260,13.7160, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,8.7260,14.9350; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom4_Flr_3_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom4_Flr_3_Wall_East,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
70.1040,49.0420,10.6680, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,49.0420,9.4490, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,53.0660,9.4490, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.0660,10.6680; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom4_Flr_3_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom4_Flr_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
69.6470,53.3400,10.6680, !- X,Y,Z ==> Vertex 1 {m}
|
|
69.6470,53.3400,9.4490, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.9410,53.3400,9.4490, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.9410,53.3400,10.6680; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom4_Flr_4_Wall_East_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom4_Flr_4_Wall_East,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
70.1040,49.0420,14.9350, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.1040,49.0420,13.7160, !- X,Y,Z ==> Vertex 2 {m}
|
|
70.1040,53.0660,13.7160, !- X,Y,Z ==> Vertex 3 {m}
|
|
70.1040,53.0660,14.9350; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom4_Flr_4_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom4_Flr_4_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
69.6470,53.3400,14.9350, !- X,Y,Z ==> Vertex 1 {m}
|
|
69.6470,53.3400,13.7160, !- X,Y,Z ==> Vertex 2 {m}
|
|
62.9410,53.3400,13.7160, !- X,Y,Z ==> Vertex 3 {m}
|
|
62.9410,53.3400,14.9350; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_3_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom5_Mult10_Flr_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
43.9220,53.3400,10.6680, !- X,Y,Z ==> Vertex 1 {m}
|
|
43.9220,53.3400,9.4490, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.8980,53.3400,9.4490, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.8980,53.3400,10.6680; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom5_Mult10_Flr_4_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom5_Mult10_Flr_4_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
43.9220,53.3400,14.9350, !- X,Y,Z ==> Vertex 1 {m}
|
|
43.9220,53.3400,13.7160, !- X,Y,Z ==> Vertex 2 {m}
|
|
39.8980,53.3400,13.7160, !- X,Y,Z ==> Vertex 3 {m}
|
|
39.8980,53.3400,14.9350; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom6_Flr_3_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom6_Flr_3_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.3660,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.3660,0.0000,9.4490, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.7300,0.0000,9.4490, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.7300,0.0000,10.6680; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom6_Flr_3_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom6_Flr_3_Wall_West,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,4.2980,10.6680, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.2980,9.4490, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.2740,9.4490, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.2740,10.6680; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom6_Flr_4_Wall_South_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom6_Flr_4_Wall_South, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.3660,0.0000,14.9350, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.3660,0.0000,13.7160, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.7300,0.0000,13.7160, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.7300,0.0000,14.9350; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom6_Flr_4_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom6_Flr_4_Wall_West,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,4.2980,14.9350, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.2980,13.7160, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.2740,13.7160, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.2740,14.9350; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_3_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom7_Mult10_Flr_3_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,8.7260,10.6680, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,8.7260,9.4490, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.8370,9.4490, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.8370,10.6680; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom7_Mult10_Flr_4_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom7_Mult10_Flr_4_Wall_West, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,8.7260,14.9350, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,8.7260,13.7160, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.8370,13.7160, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.8370,14.9350; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom8_Flr_3_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom8_Flr_3_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
5.7300,53.3400,10.6680, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7300,53.3400,9.4490, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.3660,53.3400,9.4490, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.3660,53.3400,10.6680; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom8_Flr_3_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom8_Flr_3_Wall_West,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,53.0660,10.6680, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,53.0660,9.4490, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,49.0420,9.4490, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,49.0420,10.6680; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom8_Flr_4_Wall_North_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom8_Flr_4_Wall_North, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
5.7300,53.3400,14.9350, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7300,53.3400,13.7160, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.3660,53.3400,13.7160, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.3660,53.3400,14.9350; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
PatRoom8_Flr_4_Wall_West_Window, !- Name
|
|
Window, !- Surface Type
|
|
Window Res Fixed, !- Construction Name
|
|
PatRoom8_Flr_4_Wall_West,!- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,53.0660,14.9350, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,53.0660,13.7160, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,49.0420,13.7160, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,49.0420,14.9350; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
! *** SHADING ***
|
|
|
|
Shading:Building:Detailed,
|
|
Canopy, !- Name
|
|
, !- Transmittance Schedule Name
|
|
4, !- Number of Vertices
|
|
70.104000,31.242000,4.268300, !- X,Y,Z ==> Vertex 1 {m}
|
|
70.104000,22.098000,4.268300, !- X,Y,Z ==> Vertex 2 {m}
|
|
79.248000,22.098000,4.268300, !- X,Y,Z ==> Vertex 3 {m}
|
|
79.248000,31.242000,4.268300; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
! ***GEOMETRY RULES***
|
|
|
|
GlobalGeometryRules,
|
|
UpperLeftCorner, !- Starting Vertex Position
|
|
Counterclockwise, !- Vertex Entry Direction
|
|
Relative, !- Coordinate System
|
|
Relative; !- Daylighting Reference Point Coordinate System
|
|
|
|
! ***PEOPLE***
|
|
|
|
People,
|
|
Basement People, !- Name
|
|
Basement, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
37.1747, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Corridor_Flr_1 People, !- Name
|
|
Corridor_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
92.5926, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Corridor_Flr_2 People, !- Name
|
|
Corridor_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
92.5926, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Corridor_Flr_5 People, !- Name
|
|
Corridor_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
92.5926, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Corridor_NW_Flr_3 People,!- Name
|
|
Corridor_NW_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
92.5926, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Corridor_NW_Flr_4 People,!- Name
|
|
Corridor_NW_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
92.5926, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Corridor_SE_Flr_3 People,!- Name
|
|
Corridor_SE_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
92.5926, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Corridor_SE_Flr_4 People,!- Name
|
|
Corridor_SE_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
92.5926, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Dining_Flr_5 People, !- Name
|
|
Dining_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
9.2937, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
ER_Exam1_Mult4_Flr_1 People, !- Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
4.6512, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
ER_Exam3_Mult4_Flr_1 People, !- Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
4.6512, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
ER_NurseStn_Lobby_Flr_1 People, !- Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
69.9301, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
ER_Trauma1_Flr_1 People, !- Name
|
|
ER_Trauma1_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
4.6512, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
ER_Trauma2_Flr_1 People, !- Name
|
|
ER_Trauma2_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
4.6512, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
ER_Triage_Mult4_Flr_1 People, !- Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
4.6512, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
ICU_Flr_2 People, !- Name
|
|
ICU_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
ICU_NurseStn_Lobby_Flr_2 People, !- Name
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
69.9301, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
IC_PatRoom1_Mult5_Flr_2 People, !- Name
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
IC_PatRoom2_Flr_2 People,!- Name
|
|
IC_PatRoom2_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
IC_PatRoom3_Mult6_Flr_2 People, !- Name
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Kitchen_Flr_5 People, !- Name
|
|
Kitchen_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Lab_Flr_3 People, !- Name
|
|
Lab_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Lab_Flr_4 People, !- Name
|
|
Lab_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Lobby_Records_Flr_1 People, !- Name
|
|
Lobby_Records_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
69.9301, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
NurseStn_Lobby_Flr_3 People, !- Name
|
|
NurseStn_Lobby_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
69.9301, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
NurseStn_Lobby_Flr_4 People, !- Name
|
|
NurseStn_Lobby_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
69.9301, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
NurseStn_Lobby_Flr_5 People, !- Name
|
|
NurseStn_Lobby_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
69.9301, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
OR1_Flr_2 People, !- Name
|
|
OR1_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
OR2_Mult5_Flr_2 People, !- Name
|
|
OR2_Mult5_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
OR3_Flr_2 People, !- Name
|
|
OR3_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
OR4_Flr_2 People, !- Name
|
|
OR4_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
OR_NurseStn_Lobby_Flr_2 People, !- Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
69.9301, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Office1_Flr_5 People, !- Name
|
|
Office1_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
13.2802, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Office1_Mult4_Flr_1 People, !- Name
|
|
Office1_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
13.2802, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Office2_Mult5_Flr_5 People, !- Name
|
|
Office2_Mult5_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
13.2802, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Office3_Flr_5 People, !- Name
|
|
Office3_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
13.2802, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Office4_Mult6_Flr_5 People, !- Name
|
|
Office4_Mult6_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
13.2802, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom1_Mult10_Flr_3 People, !- Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom1_Mult10_Flr_4 People, !- Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom2_Flr_3 People, !- Name
|
|
PatRoom2_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom2_Flr_4 People, !- Name
|
|
PatRoom2_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom3_Mult10_Flr_3 People, !- Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom3_Mult10_Flr_4 People, !- Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom4_Flr_3 People, !- Name
|
|
PatRoom4_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom4_Flr_4 People, !- Name
|
|
PatRoom4_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom5_Mult10_Flr_3 People, !- Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom5_Mult10_Flr_4 People, !- Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom6_Flr_3 People, !- Name
|
|
PatRoom6_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom6_Flr_4 People, !- Name
|
|
PatRoom6_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom7_Mult10_Flr_3 People, !- Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom7_Mult10_Flr_4 People, !- Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom8_Flr_3 People, !- Name
|
|
PatRoom8_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PatRoom8_Flr_4 People, !- Name
|
|
PatRoom8_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
PhysTherapy_Flr_3 People,!- Name
|
|
PhysTherapy_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Radiology_Flr_4 People, !- Name
|
|
Radiology_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_OCC_SCH, !- Number of People Schedule Name
|
|
Area/Person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
18.5874, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
EnclosureAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
! ***LIGHTS***
|
|
|
|
Lights,
|
|
Basement_Lights, !- Name
|
|
Basement, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Corridor_Flr_1_Lights, !- Name
|
|
Corridor_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Corridor_Flr_2_Lights, !- Name
|
|
Corridor_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Corridor_Flr_5_Lights, !- Name
|
|
Corridor_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Corridor_NW_Flr_3_Lights,!- Name
|
|
Corridor_NW_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Corridor_NW_Flr_4_Lights,!- Name
|
|
Corridor_NW_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Corridor_SE_Flr_3_Lights,!- Name
|
|
Corridor_SE_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Corridor_SE_Flr_4_Lights,!- Name
|
|
Corridor_SE_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Dining_Flr_5_Lights, !- Name
|
|
Dining_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.68, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
ER_Exam1_Mult4_Flr_1_Lights, !- Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
29.05, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
ER_Exam3_Mult4_Flr_1_Lights, !- Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
29.05, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
ER_NurseStn_Lobby_Flr_1_Lights, !- Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
12.05, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
ER_Trauma1_Flr_1_Lights, !- Name
|
|
ER_Trauma1_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
29.05, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
ER_Trauma2_Flr_1_Lights, !- Name
|
|
ER_Trauma2_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
29.05, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
ER_Triage_Mult4_Flr_1_Lights, !- Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
29.05, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
ICU_Flr_2_Lights, !- Name
|
|
ICU_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
8.61, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
ICU_NurseStn_Lobby_Flr_2_Lights, !- Name
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
12.05, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
IC_PatRoom1_Mult5_Flr_2_Lights, !- Name
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
8.61, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
IC_PatRoom2_Flr_2_Lights,!- Name
|
|
IC_PatRoom2_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
8.61, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
IC_PatRoom3_Mult6_Flr_2_Lights, !- Name
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
8.61, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Kitchen_Flr_5_Lights, !- Name
|
|
Kitchen_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
12.91, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Lab_Flr_3_Lights, !- Name
|
|
Lab_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
15.06, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Lab_Flr_4_Lights, !- Name
|
|
Lab_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
15.06, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Lobby_Records_Flr_1_Lights, !- Name
|
|
Lobby_Records_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
15.82, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
NurseStn_Lobby_Flr_3_Lights, !- Name
|
|
NurseStn_Lobby_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
12.7, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
NurseStn_Lobby_Flr_4_Lights, !- Name
|
|
NurseStn_Lobby_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
12.7, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
NurseStn_Lobby_Flr_5_Lights, !- Name
|
|
NurseStn_Lobby_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
12.7, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
OR1_Flr_2_Lights, !- Name
|
|
OR1_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
23.67, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
OR2_Mult5_Flr_2_Lights, !- Name
|
|
OR2_Mult5_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
23.67, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
OR3_Flr_2_Lights, !- Name
|
|
OR3_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
23.67, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
OR4_Flr_2_Lights, !- Name
|
|
OR4_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
23.67, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
OR_NurseStn_Lobby_Flr_2_Lights, !- Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
12.7, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Office1_Flr_5_Lights, !- Name
|
|
Office1_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Office1_Mult4_Flr_1_Lights, !- Name
|
|
Office1_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Office2_Mult5_Flr_5_Lights, !- Name
|
|
Office2_Mult5_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Office3_Flr_5_Lights, !- Name
|
|
Office3_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Office4_Mult6_Flr_5_Lights, !- Name
|
|
Office4_Mult6_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom1_Mult10_Flr_3_Lights, !- Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom1_Mult10_Flr_4_Lights, !- Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom2_Flr_3_Lights, !- Name
|
|
PatRoom2_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom2_Flr_4_Lights, !- Name
|
|
PatRoom2_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom3_Mult10_Flr_3_Lights, !- Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom3_Mult10_Flr_4_Lights, !- Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom4_Flr_3_Lights, !- Name
|
|
PatRoom4_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom4_Flr_4_Lights, !- Name
|
|
PatRoom4_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom5_Mult10_Flr_3_Lights, !- Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom5_Mult10_Flr_4_Lights, !- Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom6_Flr_3_Lights, !- Name
|
|
PatRoom6_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom6_Flr_4_Lights, !- Name
|
|
PatRoom6_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom7_Mult10_Flr_3_Lights, !- Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom7_Mult10_Flr_4_Lights, !- Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom8_Flr_3_Lights, !- Name
|
|
PatRoom8_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PatRoom8_Flr_4_Lights, !- Name
|
|
PatRoom8_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
PhysTherapy_Flr_3_Lights,!- Name
|
|
PhysTherapy_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.68, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Radiology_Flr_4_Lights, !- Name
|
|
Radiology_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.3, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
! ***EQUIPMENT GAINS***
|
|
|
|
ElectricEquipment,
|
|
Basement_MiscPlug_Equip, !- Name
|
|
Basement, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
8.07, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Dining_Flr_5_MiscPlug_Equip, !- Name
|
|
Dining_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
ER_Exam1_Mult4_Flr_1_MiscPlug_Equip, !- Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
16.04, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
ER_Exam3_Mult4_Flr_1_MiscPlug_Equip, !- Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
16.04, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
ER_NurseStn_Lobby_Flr_1_MiscPlug_Equip, !- Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
14.63, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
ER_Trauma1_Flr_1_MiscPlug_Equip, !- Name
|
|
ER_Trauma1_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
43.04, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
ER_Trauma2_Flr_1_MiscPlug_Equip, !- Name
|
|
ER_Trauma2_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
43.04, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
ER_Triage_Mult4_Flr_1_MiscPlug_Equip, !- Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
29.05, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
ICU_Flr_2_MiscPlug_Equip,!- Name
|
|
ICU_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.28, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
ICU_NurseStn_Lobby_Flr_2_MiscPlug_Equip, !- Name
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
IC_PatRoom1_Mult5_Flr_2_MiscPlug_Equip, !- Name
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.28, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
IC_PatRoom2_Flr_2_MiscPlug_Equip, !- Name
|
|
IC_PatRoom2_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.28, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
IC_PatRoom3_Mult6_Flr_2_MiscPlug_Equip, !- Name
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.28, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Kitchen_Flr_5_ExhFan_Equip, !- Name
|
|
Kitchen_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
Kitchen_Exhaust_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
925, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
1.0000, !- Fraction Lost
|
|
KitchenExhFan; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Kitchen_Flr_5_MiscElec_Equip, !- Name
|
|
Kitchen_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
Kitchen_Elec_Equip_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
80.7, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.2000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.1000, !- Fraction Lost
|
|
MiscElec; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Lab_Flr_3_MiscPlug_Equip,!- Name
|
|
Lab_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
43.04, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Lab_Flr_4_MiscPlug_Equip,!- Name
|
|
Lab_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
43.04, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Lobby_Records_Flr_1_MiscPlug_Equip, !- Name
|
|
Lobby_Records_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
1.08, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
NurseStn_Lobby_Flr_3_MiscPlug_Equip, !- Name
|
|
NurseStn_Lobby_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.19, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
NurseStn_Lobby_Flr_4_MiscPlug_Equip, !- Name
|
|
NurseStn_Lobby_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.19, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
NurseStn_Lobby_Flr_5_MiscPlug_Equip, !- Name
|
|
NurseStn_Lobby_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.19, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
OR1_Flr_2_MiscPlug_Equip,!- Name
|
|
OR1_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
43.04, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
OR2_Mult5_Flr_2_MiscPlug_Equip, !- Name
|
|
OR2_Mult5_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
43.04, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
OR3_Flr_2_MiscPlug_Equip,!- Name
|
|
OR3_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
43.04, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
OR4_Flr_2_MiscPlug_Equip,!- Name
|
|
OR4_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
43.04, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
OR_NurseStn_Lobby_Flr_2_MiscPlug_Equip, !- Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.19, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Office1_Flr_5_MiscPlug_Equip, !- Name
|
|
Office1_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Office1_Mult4_Flr_1_MiscPlug_Equip, !- Name
|
|
Office1_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Office2_Mult5_Flr_5_MiscPlug_Equip, !- Name
|
|
Office2_Mult5_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Office3_Flr_5_MiscPlug_Equip, !- Name
|
|
Office3_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Office4_Mult6_Flr_5_MiscPlug_Equip, !- Name
|
|
Office4_Mult6_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom1_Mult10_Flr_3_MiscPlug_Equip, !- Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom1_Mult10_Flr_4_MiscPlug_Equip, !- Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom2_Flr_3_MiscPlug_Equip, !- Name
|
|
PatRoom2_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom2_Flr_4_MiscPlug_Equip, !- Name
|
|
PatRoom2_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom3_Mult10_Flr_3_MiscPlug_Equip, !- Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom3_Mult10_Flr_4_MiscPlug_Equip, !- Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom4_Flr_3_MiscPlug_Equip, !- Name
|
|
PatRoom4_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom4_Flr_4_MiscPlug_Equip, !- Name
|
|
PatRoom4_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom5_Mult10_Flr_3_MiscPlug_Equip, !- Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom5_Mult10_Flr_4_MiscPlug_Equip, !- Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom6_Flr_3_MiscPlug_Equip, !- Name
|
|
PatRoom6_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom6_Flr_4_MiscPlug_Equip, !- Name
|
|
PatRoom6_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom7_Mult10_Flr_3_MiscPlug_Equip, !- Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom7_Mult10_Flr_4_MiscPlug_Equip, !- Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom8_Flr_3_MiscPlug_Equip, !- Name
|
|
PatRoom8_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PatRoom8_Flr_4_MiscPlug_Equip, !- Name
|
|
PatRoom8_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
CRITICAL_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.52, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
PhysTherapy_Flr_3_MiscPlug_Equip, !- Name
|
|
PhysTherapy_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
16.14, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Radiology_Flr_4_MiscPlug_Equip, !- Name
|
|
Radiology_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
ADMIN_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
53.08, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
MiscPlug; !- End-Use Subcategory
|
|
|
|
GasEquipment,
|
|
Kitchen_Flr_5_MiscGas_Equip, !- Name
|
|
Kitchen_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
Kitchen_Gas_Equip_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
304.87, !- Power per Zone Floor Area {W/m2}
|
|
, !- Power per Person {W/person}
|
|
0.1000, !- Fraction Latent
|
|
0.2000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
MiscGas; !- End-Use Subcategory
|
|
|
|
! ***EXTERIOR LOADS***
|
|
|
|
Exterior:Lights,
|
|
Exterior Facade Lighting,!- Name
|
|
ALWAYS_ON, !- Schedule Name
|
|
15409, !- Design Level {W}
|
|
AstronomicalClock, !- Control Option
|
|
Exterior Facade Lighting;!- End-Use Subcategory
|
|
|
|
Exterior:FuelEquipment,
|
|
Elevators, !- Name
|
|
Electricity, !- Fuel Use Type
|
|
BLDG_ELEVATORS, !- Schedule Name
|
|
162962.637362637, !- Design Level {W}
|
|
Elevators; !- End-Use Subcategory
|
|
|
|
! ***INFILTRATION***
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Corridor_Flr_1_Infiltration, !- Name
|
|
Corridor_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Corridor_Flr_2_Infiltration, !- Name
|
|
Corridor_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Corridor_Flr_5_Infiltration, !- Name
|
|
Corridor_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Corridor_NW_Flr_3_Infiltration, !- Name
|
|
Corridor_NW_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Corridor_NW_Flr_4_Infiltration, !- Name
|
|
Corridor_NW_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Corridor_SE_Flr_3_Infiltration, !- Name
|
|
Corridor_SE_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Corridor_SE_Flr_4_Infiltration, !- Name
|
|
Corridor_SE_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Dining_Flr_5_Infiltration, !- Name
|
|
Dining_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
ER_Exam1_Mult4_Flr_1_Infiltration, !- Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
ER_Exam3_Mult4_Flr_1_Infiltration, !- Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
ER_NurseStn_Lobby_Flr_1_Infiltration, !- Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
ER_Trauma1_Flr_1_Infiltration, !- Name
|
|
ER_Trauma1_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
ER_Trauma2_Flr_1_Infiltration, !- Name
|
|
ER_Trauma2_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
ER_Triage_Mult4_Flr_1_Infiltration, !- Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
ICU_Flr_2_Infiltration, !- Name
|
|
ICU_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
IC_PatRoom1_Mult5_Flr_2_Infiltration, !- Name
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
IC_PatRoom2_Flr_2_Infiltration, !- Name
|
|
IC_PatRoom2_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
IC_PatRoom3_Mult6_Flr_2_Infiltration, !- Name
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Kitchen_Flr_5_Infiltration, !- Name
|
|
Kitchen_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Lobby_Records_Flr_1_Infiltration, !- Name
|
|
Lobby_Records_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
NurseStn_Lobby_Flr_5_Infiltration, !- Name
|
|
NurseStn_Lobby_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
OR1_Flr_2_Infiltration, !- Name
|
|
OR1_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
OR2_Mult5_Flr_2_Infiltration, !- Name
|
|
OR2_Mult5_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
OR3_Flr_2_Infiltration, !- Name
|
|
OR3_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
OR_NurseStn_Lobby_Flr_2_Infiltration, !- Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Office1_Flr_5_Infiltration, !- Name
|
|
Office1_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Office1_Mult4_Flr_1_Infiltration, !- Name
|
|
Office1_Mult4_Flr_1, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Office2_Mult5_Flr_5_Infiltration, !- Name
|
|
Office2_Mult5_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Office3_Flr_5_Infiltration, !- Name
|
|
Office3_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Office4_Mult6_Flr_5_Infiltration, !- Name
|
|
Office4_Mult6_Flr_5, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom1_Mult10_Flr_3_Infiltration, !- Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom1_Mult10_Flr_4_Infiltration, !- Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom2_Flr_3_Infiltration, !- Name
|
|
PatRoom2_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom2_Flr_4_Infiltration, !- Name
|
|
PatRoom2_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom3_Mult10_Flr_3_Infiltration, !- Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom3_Mult10_Flr_4_Infiltration, !- Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom4_Flr_3_Infiltration, !- Name
|
|
PatRoom4_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom4_Flr_4_Infiltration, !- Name
|
|
PatRoom4_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom5_Mult10_Flr_3_Infiltration, !- Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom5_Mult10_Flr_4_Infiltration, !- Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom6_Flr_3_Infiltration, !- Name
|
|
PatRoom6_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom6_Flr_4_Infiltration, !- Name
|
|
PatRoom6_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom7_Mult10_Flr_3_Infiltration, !- Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom7_Mult10_Flr_4_Infiltration, !- Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom8_Flr_3_Infiltration, !- Name
|
|
PatRoom8_Flr_3, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
PatRoom8_Flr_4_Infiltration, !- Name
|
|
PatRoom8_Flr_4, !- Zone or ZoneList or Space or SpaceList Name
|
|
INFIL_QUARTER_ON_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
! ***INTERNAL MASS***
|
|
|
|
InternalMass,
|
|
Basement Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Basement, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
7478.6947; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Corridor_Flr_1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Corridor_Flr_1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1138.0622; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Corridor_Flr_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Corridor_Flr_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1138.0622; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Corridor_Flr_5 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Corridor_Flr_5, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1003.3528; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Corridor_NW_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Corridor_NW_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1133.4171; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Corridor_NW_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Corridor_NW_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1133.4171; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Corridor_SE_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Corridor_SE_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1133.4171; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Corridor_SE_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Corridor_SE_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1133.4171; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Dining_Flr_5 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Dining_Flr_5, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1393.5456; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
ER_Exam1_Mult4_Flr_1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
55.7418; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
ER_Exam3_Mult4_Flr_1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
55.7418; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
ER_NurseStn_Lobby_Flr_1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
2471.2209; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
ER_Trauma1_Flr_1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
ER_Trauma1_Flr_1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
55.7418; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
ER_Trauma2_Flr_1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
ER_Trauma2_Flr_1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
55.7418; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
ER_Triage_Mult4_Flr_1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
55.7418; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
ICU_Flr_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
ICU_Flr_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1235.9289; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
ICU_NurseStn_Lobby_Flr_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1337.5356; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
IC_PatRoom1_Mult5_Flr_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
41.8064; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
IC_PatRoom2_Flr_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
IC_PatRoom2_Flr_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
55.7418; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
IC_PatRoom3_Mult6_Flr_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
41.8064; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Kitchen_Flr_5 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Kitchen_Flr_5, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1858.0608; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Lab_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Lab_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
529.5473; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Lab_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Lab_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
529.5473; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Lobby_Records_Flr_1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Lobby_Records_Flr_1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
2949.6212; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
NurseStn_Lobby_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
NurseStn_Lobby_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1811.6093; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
NurseStn_Lobby_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
NurseStn_Lobby_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
1811.6093; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
NurseStn_Lobby_Flr_5 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
NurseStn_Lobby_Flr_5, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
2081.0281; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
OR1_Flr_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
OR1_Flr_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
111.4836; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
OR2_Mult5_Flr_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
OR2_Mult5_Flr_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
111.4836; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
OR3_Flr_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
OR3_Flr_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
111.4836; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
OR4_Flr_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
OR4_Flr_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
445.9346; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
OR_NurseStn_Lobby_Flr_2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
2025.2863; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Office1_Flr_5 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Office1_Flr_5, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
139.3911; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Office1_Mult4_Flr_1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Office1_Mult4_Flr_1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
27.8709; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Office2_Mult5_Flr_5 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Office2_Mult5_Flr_5, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
139.3546; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Office3_Flr_5 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Office3_Flr_5, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
139.3546; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Office4_Mult6_Flr_5 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Office4_Mult6_Flr_5, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
27.8709; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom1_Mult10_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
41.8064; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom1_Mult10_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
41.8064; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom2_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom2_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
69.6773; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom2_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom2_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
69.6773; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom3_Mult10_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
40.4165; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom3_Mult10_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
40.4165; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom4_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom4_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
69.6773; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom4_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom4_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
69.6773; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom5_Mult10_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
41.8064; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom5_Mult10_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
41.8064; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom6_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom6_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
55.7418; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom6_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom6_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
55.7418; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom7_Mult10_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
40.4165; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom7_Mult10_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
40.4165; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom8_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom8_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
55.7418; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PatRoom8_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PatRoom8_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
55.7418; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
PhysTherapy_Flr_3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
PhysTherapy_Flr_3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
975.4819; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Radiology_Flr_4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Radiology_Flr_4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
975.4819; !- Surface Area {m2}
|
|
|
|
! ***INTERNAL GAINS SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Exhaust_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 05:00,0, !- Field 3
|
|
Until: 18:00,1, !- Field 5
|
|
Until: 24:00,0, !- Field 7
|
|
For: SummerDesignDay, !- Field 9
|
|
Until: 05:00,0, !- Field 10
|
|
Until: 18:00,1, !- Field 12
|
|
Until: 24:00,0, !- Field 14
|
|
For: WinterDesignDay, !- Field 16
|
|
Until: 07:00,0, !- Field 17
|
|
Until: 15:00,1, !- Field 19
|
|
Until: 24:00,0, !- Field 21
|
|
For: Saturdays, !- Field 23
|
|
Until: 07:00,0, !- Field 24
|
|
Until: 15:00,1, !- Field 26
|
|
Until: 24:00,0, !- Field 28
|
|
For: AllOtherDays, !- Field 30
|
|
Until: 24:00,0; !- Field 31
|
|
|
|
Schedule:Compact,
|
|
ADMIN_EQUIP_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 04:00,0.30, !- Field 3
|
|
Until: 06:00,0.50, !- Field 5
|
|
Until: 18:00,1.00, !- Field 7
|
|
Until: 20:00,0.50, !- Field 9
|
|
Until: 24:00,0.30, !- Field 11
|
|
For: SummerDesignDay, !- Field 13
|
|
Until: 04:00,0.30, !- Field 14
|
|
Until: 06:00,0.50, !- Field 16
|
|
Until: 18:00,1.00, !- Field 18
|
|
Until: 20:00,0.50, !- Field 20
|
|
Until: 24:00,0.30, !- Field 22
|
|
For: WinterDesignDay, !- Field 24
|
|
Until: 24:00,0.30, !- Field 25
|
|
For: Saturday, !- Field 27
|
|
Until: 07:00,0.30, !- Field 28
|
|
Until: 09:00,0.50, !- Field 30
|
|
Until: 15:00,0.80, !- Field 32
|
|
Until: 20:00,0.50, !- Field 34
|
|
Until: 24:00,0.30, !- Field 36
|
|
For: AllOtherDays, !- Field 38
|
|
Until: 08:00,0.30, !- Field 39
|
|
Until: 17:00,0.50, !- Field 41
|
|
Until: 24:00,0.30; !- Field 43
|
|
|
|
Schedule:Compact,
|
|
ADMIN_LIGHT_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 04:00,0.10, !- Field 3
|
|
Until: 06:00,0.30, !- Field 5
|
|
Until: 07:00,0.60, !- Field 7
|
|
Until: 18:00,0.90, !- Field 9
|
|
Until: 20:00,0.60, !- Field 11
|
|
Until: 22:00,0.30, !- Field 13
|
|
Until: 24:00,0.10, !- Field 15
|
|
For: SummerDesignDay, !- Field 17
|
|
Until: 04:00,0.10, !- Field 18
|
|
Until: 06:00,0.30, !- Field 20
|
|
Until: 07:00,0.60, !- Field 22
|
|
Until: 18:00,0.90, !- Field 24
|
|
Until: 20:00,0.60, !- Field 26
|
|
Until: 22:00,0.30, !- Field 28
|
|
Until: 24:00,0.10, !- Field 30
|
|
For: WinterDesignDay, !- Field 32
|
|
Until: 07:00,0.10, !- Field 33
|
|
Until: 09:00,0.30, !- Field 35
|
|
Until: 15:00,0.40, !- Field 37
|
|
Until: 20:00,0.30, !- Field 39
|
|
Until: 24:00,0.10, !- Field 41
|
|
For: Saturday, !- Field 43
|
|
Until: 07:00,0.10, !- Field 44
|
|
Until: 09:00,0.30, !- Field 46
|
|
Until: 15:00,0.40, !- Field 48
|
|
Until: 20:00,0.30, !- Field 50
|
|
Until: 24:00,0.10, !- Field 52
|
|
For: AllOtherDays, !- Field 54
|
|
Until: 08:00,0.05, !- Field 55
|
|
Until: 17:00,0.10, !- Field 57
|
|
Until: 24:00,0.05; !- Field 59
|
|
|
|
Schedule:Compact,
|
|
ADMIN_OCC_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 04:00,0.05, !- Field 3
|
|
Until: 06:00,0.20, !- Field 5
|
|
Until: 07:00,0.50, !- Field 7
|
|
Until: 18:00,0.90, !- Field 9
|
|
Until: 20:00,0.50, !- Field 11
|
|
Until: 22:00,0.20, !- Field 13
|
|
Until: 24:00,0.05, !- Field 15
|
|
For: SummerDesignDay, !- Field 17
|
|
Until: 04:00,0.05, !- Field 18
|
|
Until: 06:00,0.20, !- Field 20
|
|
Until: 07:00,0.50, !- Field 22
|
|
Until: 18:00,0.90, !- Field 24
|
|
Until: 20:00,0.50, !- Field 26
|
|
Until: 22:00,0.20, !- Field 28
|
|
Until: 24:00,0.05, !- Field 30
|
|
For: WinterDesignDay, !- Field 32
|
|
Until: 07:00,0.05, !- Field 33
|
|
Until: 09:00,0.20, !- Field 35
|
|
Until: 15:00,0.30, !- Field 37
|
|
Until: 20:00,0.20, !- Field 39
|
|
Until: 24:00,0.05, !- Field 41
|
|
For: Saturday, !- Field 43
|
|
Until: 07:00,0.05, !- Field 44
|
|
Until: 09:00,0.20, !- Field 46
|
|
Until: 15:00,0.30, !- Field 48
|
|
Until: 20:00,0.20, !- Field 50
|
|
Until: 24:00,0.05, !- Field 52
|
|
For: Sunday Holidays AllOtherDays, !- Field 54
|
|
Until: 08:00,0.00, !- Field 55
|
|
Until: 17:00,0.05, !- Field 57
|
|
Until: 24:00,0.00; !- Field 59
|
|
|
|
Schedule:Compact,
|
|
BLDG_ELEVATORS, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 07:00,0.2, !- Field 3
|
|
Until: 08:00,0.5, !- Field 5
|
|
Until: 09:00,0.75, !- Field 7
|
|
Until: 10:00,1.00, !- Field 9
|
|
Until: 11:00,1.00, !- Field 11
|
|
Until: 12:00,1.00, !- Field 13
|
|
Until: 13:00,0.75, !- Field 15
|
|
Until: 14:00,1.00, !- Field 17
|
|
Until: 15:00,1.00, !- Field 19
|
|
Until: 16:00,1.00, !- Field 21
|
|
Until: 17:00,1.00, !- Field 23
|
|
Until: 18:00,1.00, !- Field 25
|
|
Until: 19:00,0.52, !- Field 27
|
|
Until: 20:00,0.52, !- Field 29
|
|
Until: 21:00,0.52, !- Field 31
|
|
Until: 22:00,0.28, !- Field 33
|
|
Until: 24:00,0.2, !- Field 35
|
|
For: Saturday WinterDesignDay, !- Field 37
|
|
Until: 07:00,0.2, !- Field 38
|
|
Until: 08:00,0.4, !- Field 40
|
|
Until: 09:00,0.46, !- Field 42
|
|
Until: 10:00,0.70, !- Field 44
|
|
Until: 11:00,0.70, !- Field 46
|
|
Until: 12:00,0.70, !- Field 48
|
|
Until: 13:00,0.51, !- Field 50
|
|
Until: 14:00,0.51, !- Field 52
|
|
Until: 15:00,0.51, !- Field 54
|
|
Until: 16:00,0.51, !- Field 56
|
|
Until: 17:00,0.51, !- Field 58
|
|
Until: 18:00,0.25, !- Field 60
|
|
Until: 24:00,0.2, !- Field 62
|
|
For: AllOtherDays, !- Field 64
|
|
Until: 08:00,0.2, !- Field 65
|
|
Until: 16:00,0.4, !- Field 67
|
|
Until: 24:00,0.2; !- Field 69
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 07:00,0.1, !- Field 3
|
|
Until: 08:00,0.5, !- Field 5
|
|
Until: 16:00,0.9, !- Field 7
|
|
Until: 23:00,0.3, !- Field 9
|
|
Until: 24:00,0.1, !- Field 11
|
|
For: SummerDesignDay, !- Field 13
|
|
Until: 24:00,1.0, !- Field 14
|
|
For: WinterDesignDay, !- Field 16
|
|
Until: 24:00,0.0, !- Field 17
|
|
For: Saturday, !- Field 19
|
|
Until: 07:00,0.1, !- Field 20
|
|
Until: 08:00,0.2, !- Field 22
|
|
Until: 18:00,0.4, !- Field 24
|
|
Until: 24:00,0.1, !- Field 26
|
|
For: AllOtherDays, !- Field 28
|
|
Until: 08:00,0.05, !- Field 29
|
|
Until: 16:00,0.1, !- Field 31
|
|
Until: 24:00,0.05; !- Field 33
|
|
|
|
Schedule:Compact,
|
|
CRITICAL_EQUIP_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 04:00,0.50, !- Field 3
|
|
Until: 06:00,0.50, !- Field 5
|
|
Until: 18:00,1.00, !- Field 7
|
|
Until: 20:00,0.80, !- Field 9
|
|
Until: 24:00,0.50, !- Field 11
|
|
For: SummerDesignDay, !- Field 13
|
|
Until: 04:00,0.50, !- Field 14
|
|
Until: 06:00,0.50, !- Field 16
|
|
Until: 18:00,1.00, !- Field 18
|
|
Until: 20:00,0.80, !- Field 20
|
|
Until: 24:00,0.50, !- Field 22
|
|
For: WinterDesignDay, !- Field 24
|
|
Until: 24:00,0.30, !- Field 25
|
|
For: Saturday, !- Field 27
|
|
Until: 04:00,0.50, !- Field 28
|
|
Until: 06:00,0.50, !- Field 30
|
|
Until: 18:00,1.00, !- Field 32
|
|
Until: 20:00,0.80, !- Field 34
|
|
Until: 24:00,0.50, !- Field 36
|
|
For: Sunday Holidays AllOtherDays, !- Field 38
|
|
Until: 04:00,0.50, !- Field 39
|
|
Until: 06:00,0.50, !- Field 41
|
|
Until: 18:00,1.00, !- Field 43
|
|
Until: 20:00,0.80, !- Field 45
|
|
Until: 24:00,0.50; !- Field 47
|
|
|
|
Schedule:Compact,
|
|
CRITICAL_LIGHT_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 04:00,0.50, !- Field 3
|
|
Until: 06:00,0.70, !- Field 5
|
|
Until: 18:00,0.90, !- Field 7
|
|
Until: 22:00,0.70, !- Field 9
|
|
Until: 24:00,0.50, !- Field 11
|
|
For: SummerDesignDay, !- Field 13
|
|
Until: 04:00,0.50, !- Field 14
|
|
Until: 06:00,0.70, !- Field 16
|
|
Until: 18:00,0.90, !- Field 18
|
|
Until: 22:00,0.70, !- Field 20
|
|
Until: 24:00,0.50, !- Field 22
|
|
For: WinterDesignDay, !- Field 24
|
|
Until: 04:00,0.50, !- Field 25
|
|
Until: 06:00,0.70, !- Field 27
|
|
Until: 18:00,0.90, !- Field 29
|
|
Until: 22:00,0.70, !- Field 31
|
|
Until: 24:00,0.50, !- Field 33
|
|
For: Saturday, !- Field 35
|
|
Until: 04:00,0.50, !- Field 36
|
|
Until: 06:00,0.70, !- Field 38
|
|
Until: 18:00,0.90, !- Field 40
|
|
Until: 22:00,0.70, !- Field 42
|
|
Until: 24:00,0.50, !- Field 44
|
|
For: AllOtherDays, !- Field 46
|
|
Until: 04:00,0.50, !- Field 47
|
|
Until: 06:00,0.70, !- Field 49
|
|
Until: 18:00,0.90, !- Field 51
|
|
Until: 22:00,0.70, !- Field 53
|
|
Until: 24:00,0.50; !- Field 55
|
|
|
|
Schedule:Compact,
|
|
CRITICAL_OCC_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 04:00,0.40, !- Field 3
|
|
Until: 06:00,0.65, !- Field 5
|
|
Until: 18:00,0.90, !- Field 7
|
|
Until: 22:00,0.65, !- Field 9
|
|
Until: 24:00,0.40, !- Field 11
|
|
For: SummerDesignDay, !- Field 13
|
|
Until: 04:00,0.40, !- Field 14
|
|
Until: 06:00,0.65, !- Field 16
|
|
Until: 18:00,0.90, !- Field 18
|
|
Until: 22:00,0.65, !- Field 20
|
|
Until: 24:00,0.40, !- Field 22
|
|
For: WinterDesignDay, !- Field 24
|
|
Until: 04:00,0.40, !- Field 25
|
|
Until: 06:00,0.65, !- Field 27
|
|
Until: 18:00,0.90, !- Field 29
|
|
Until: 22:00,0.65, !- Field 31
|
|
Until: 24:00,0.40, !- Field 33
|
|
For: Saturday, !- Field 35
|
|
Until: 04:00,0.40, !- Field 36
|
|
Until: 06:00,0.65, !- Field 38
|
|
Until: 18:00,0.90, !- Field 40
|
|
Until: 22:00,0.65, !- Field 42
|
|
Until: 24:00,0.40, !- Field 44
|
|
For: AllOtherDays, !- Field 46
|
|
Until: 04:00,0.40, !- Field 47
|
|
Until: 06:00,0.65, !- Field 49
|
|
Until: 18:00,0.90, !- Field 51
|
|
Until: 22:00,0.65, !- Field 53
|
|
Until: 24:00,0.40; !- Field 55
|
|
|
|
Schedule:Compact,
|
|
INFIL_QUARTER_ON_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 24:00,0.25, !- Field 3
|
|
For: Saturday, !- Field 5
|
|
Until: 24:00,0.25, !- Field 6
|
|
For: SummerDesignDay WinterDesignDay, !- Field 8
|
|
Until: 24:00,1.0, !- Field 9
|
|
For: AllOtherDays, !- Field 11
|
|
Until: 24:00,0.25; !- Field 12
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Elec_Equip_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekday, !- Field 2
|
|
Until: 06:00,0.10, !- Field 3
|
|
Until: 07:00,0.25, !- Field 5
|
|
Until: 09:00,0.35, !- Field 7
|
|
Until: 10:00,0.25, !- Field 9
|
|
Until: 13:00,0.35, !- Field 11
|
|
Until: 16:00,0.25, !- Field 13
|
|
Until: 19:00,0.35, !- Field 15
|
|
Until: 24:00,0.25, !- Field 17
|
|
For: Saturday, !- Field 19
|
|
Until: 06:00,0.10, !- Field 20
|
|
Until: 07:00,0.25, !- Field 22
|
|
Until: 09:00,0.35, !- Field 24
|
|
Until: 10:00,0.25, !- Field 26
|
|
Until: 13:00,0.35, !- Field 28
|
|
Until: 16:00,0.25, !- Field 30
|
|
Until: 19:00,0.35, !- Field 32
|
|
Until: 24:00,0.25, !- Field 34
|
|
For: SummerDesignDay, !- Field 36
|
|
Until: 24:00,0.35, !- Field 37
|
|
For: WinterDesignDay, !- Field 39
|
|
Until: 24:00,0.0, !- Field 40
|
|
For: AllOtherDays, !- Field 42
|
|
Until: 06:00,0.10, !- Field 43
|
|
Until: 07:00,0.25, !- Field 45
|
|
Until: 09:00,0.35, !- Field 47
|
|
Until: 10:00,0.25, !- Field 49
|
|
Until: 13:00,0.35, !- Field 51
|
|
Until: 16:00,0.25, !- Field 53
|
|
Until: 19:00,0.35, !- Field 55
|
|
Until: 24:00,0.25; !- Field 57
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Gas_Equip_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays Saturday, !- Field 2
|
|
Until: 05:00,0.02, !- Field 3
|
|
Until: 06:00,0.05, !- Field 5
|
|
Until: 07:00,0.1, !- Field 7
|
|
Until: 08:00,0.15, !- Field 9
|
|
Until: 09:00,0.2, !- Field 11
|
|
Until: 10:00,0.15, !- Field 13
|
|
Until: 13:00,0.25, !- Field 15
|
|
Until: 14:00,0.2, !- Field 17
|
|
Until: 15:00,0.15, !- Field 19
|
|
Until: 16:00,0.2, !- Field 21
|
|
Until: 19:00,0.3, !- Field 23
|
|
Until: 21:00,0.20, !- Field 25
|
|
Until: 22:00,0.15, !- Field 27
|
|
Until: 23:00,0.10, !- Field 29
|
|
Until: 24:00,0.05, !- Field 31
|
|
For: SummerDesignDay, !- Field 33
|
|
Until: 24:00,0.25, !- Field 34
|
|
For: WinterDesignDay, !- Field 36
|
|
Until: 24:00,0.0, !- Field 37
|
|
For: AllOtherDays, !- Field 39
|
|
Until: 05:00,0.02, !- Field 40
|
|
Until: 06:00,0.05, !- Field 42
|
|
Until: 07:00,0.1, !- Field 44
|
|
Until: 08:00,0.15, !- Field 46
|
|
Until: 09:00,0.2, !- Field 48
|
|
Until: 10:00,0.15, !- Field 50
|
|
Until: 13:00,0.25, !- Field 52
|
|
Until: 14:00,0.2, !- Field 54
|
|
Until: 15:00,0.15, !- Field 56
|
|
Until: 16:00,0.2, !- Field 58
|
|
Until: 19:00,0.3, !- Field 60
|
|
Until: 21:00,0.20, !- Field 62
|
|
Until: 22:00,0.15, !- Field 64
|
|
Until: 23:00,0.10, !- Field 66
|
|
Until: 24:00,0.05; !- Field 68
|
|
|
|
Schedule:Compact,
|
|
WORK_EFF_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CLOTHING_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 04/30, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0, !- Field 3
|
|
Through: 09/30, !- Field 5
|
|
For: AllDays, !- Field 6
|
|
Until: 24:00,0.5, !- Field 7
|
|
Through: 12/31, !- Field 9
|
|
For: AllDays, !- Field 10
|
|
Until: 24:00,1.0; !- Field 11
|
|
|
|
Schedule:Compact,
|
|
ACTIVITY_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,120.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
AIR_VELO_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
! ***TRANSFER AIR***
|
|
|
|
ZoneMixing,
|
|
Kitchen_Flr_5 Exhaust Fanmixing_0, !- Name
|
|
Kitchen_Flr_5, !- Zone or Space Name
|
|
HVACOperationSchd, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.749970410062731, !- Design Flow Rate {m3/s}
|
|
, !- Flow Rate per Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Dining_Flr_5, !- Source Zone or Space Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
! ***HVAC EQUIPMENT***
|
|
|
|
Fan:VariableVolume,
|
|
CAV_1_Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.6084, !- Fan Total Efficiency
|
|
1515.192, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method
|
|
, !- Fan Power Minimum Flow Fraction
|
|
0.0000, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.936, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0407598940, !- Fan Power Coefficient 1
|
|
0.08804497, !- Fan Power Coefficient 2
|
|
-0.072926120, !- Fan Power Coefficient 3
|
|
0.9437398230, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
CAV_1_HeatC-CAV_1_FanNode, !- Air Inlet Node Name
|
|
CAV_1 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan Energy; !- End-Use Subcategory
|
|
|
|
Fan:VariableVolume,
|
|
CAV_2_Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.6045, !- Fan Total Efficiency
|
|
1515.192, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method
|
|
, !- Fan Power Minimum Flow Fraction
|
|
0.0000, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.93, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0407598940, !- Fan Power Coefficient 1
|
|
0.08804497, !- Fan Power Coefficient 2
|
|
-0.072926120, !- Fan Power Coefficient 3
|
|
0.9437398230, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
CAV_2_HeatC-CAV_2_FanNode, !- Air Inlet Node Name
|
|
CAV_2 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan Energy; !- End-Use Subcategory
|
|
|
|
Fan:VariableVolume,
|
|
VAV_1_Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.61425, !- Fan Total Efficiency
|
|
1515.192, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method
|
|
, !- Fan Power Minimum Flow Fraction
|
|
0.0000, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.945, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0407598940, !- Fan Power Coefficient 1
|
|
0.08804497, !- Fan Power Coefficient 2
|
|
-0.072926120, !- Fan Power Coefficient 3
|
|
0.9437398230, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Air Inlet Node Name
|
|
VAV_1 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan Energy; !- End-Use Subcategory
|
|
|
|
Fan:VariableVolume,
|
|
VAV_2_Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
0.6175, !- Fan Total Efficiency
|
|
1515.192, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method
|
|
, !- Fan Power Minimum Flow Fraction
|
|
0.0000, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.95, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0407598940, !- Fan Power Coefficient 1
|
|
0.08804497, !- Fan Power Coefficient 2
|
|
-0.072926120, !- Fan Power Coefficient 3
|
|
0.9437398230, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Air Inlet Node Name
|
|
VAV_2 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan Energy; !- End-Use Subcategory
|
|
|
|
Fan:ZoneExhaust,
|
|
Dining_Flr_5 Exhaust Fan,!- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
1.0, !- Fan Total Efficiency
|
|
1.0e-006, !- Pressure Rise {Pa}
|
|
0.749970410062731, !- Maximum Flow Rate {m3/s}
|
|
Dining_Flr_5 Exhaust Fan Node, !- Air Inlet Node Name
|
|
Dining_Flr_5 Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
Fan:ZoneExhaust,
|
|
Kitchen_Flr_5 Exhaust Fan, !- Name
|
|
HVACOperationSchd, !- Availability Schedule Name
|
|
1.0, !- Fan Total Efficiency
|
|
1.0e-006, !- Pressure Rise {Pa}
|
|
1.75102958993727, !- Maximum Flow Rate {m3/s}
|
|
Kitchen_Flr_5 Exhaust Fan Node, !- Air Inlet Node Name
|
|
Kitchen_Flr_5 Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
Coil:Heating:Water,
|
|
Basement VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Basement VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Basement VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Basement VAV Box Damper Node, !- Air Inlet Node Name
|
|
Basement VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
CAV_1_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
CAV_1_HeatCDemand Inlet Node, !- Water Inlet Node Name
|
|
CAV_1_HeatCDemand Outlet Node, !- Water Outlet Node Name
|
|
CAV_1_CoolC-CAV_1_HeatCNode, !- Air Inlet Node Name
|
|
CAV_1_HeatC-CAV_1_FanNode, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
CAV_2_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
CAV_2_HeatCDemand Inlet Node, !- Water Inlet Node Name
|
|
CAV_2_HeatCDemand Outlet Node, !- Water Outlet Node Name
|
|
CAV_2_CoolC-CAV_2_HeatCNode, !- Air Inlet Node Name
|
|
CAV_2_HeatC-CAV_2_FanNode, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Corridor_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Corridor_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Corridor_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Corridor_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Corridor_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Corridor_Flr_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Corridor_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Corridor_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Corridor_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Corridor_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Corridor_Flr_5 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Corridor_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Corridor_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Corridor_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Corridor_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Corridor_NW_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Corridor_NW_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Corridor_NW_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Corridor_NW_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Corridor_NW_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Corridor_NW_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Corridor_NW_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Corridor_NW_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Corridor_NW_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Corridor_NW_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Corridor_SE_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Corridor_SE_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Corridor_SE_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Corridor_SE_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Corridor_SE_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Corridor_SE_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Corridor_SE_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Corridor_SE_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Corridor_SE_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Corridor_SE_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Dining_Flr_5 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Dining_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Dining_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Dining_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Dining_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
ER_Trauma1_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
ER_Trauma1_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
ER_Trauma1_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
ER_Trauma1_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
ER_Trauma1_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
ER_Trauma2_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
ER_Trauma2_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
ER_Trauma2_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
ER_Trauma2_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
ER_Trauma2_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
ER_Triage_Mult4_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
ER_Triage_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
ER_Triage_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
ER_Triage_Mult4_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
ER_Triage_Mult4_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
ICU_Flr_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
ICU_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
ICU_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
ICU_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
ICU_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
IC_PatRoom2_Flr_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
IC_PatRoom2_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
IC_PatRoom2_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
IC_PatRoom2_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
IC_PatRoom2_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Kitchen_Flr_5 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Kitchen_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Kitchen_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Kitchen_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Kitchen_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Lab_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Lab_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Lab_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Lab_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Lab_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Lab_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Lab_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Lab_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Lab_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Lab_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Lobby_Records_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Lobby_Records_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Lobby_Records_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Lobby_Records_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Lobby_Records_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
NurseStn_Lobby_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
NurseStn_Lobby_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
NurseStn_Lobby_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
NurseStn_Lobby_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
NurseStn_Lobby_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
NurseStn_Lobby_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
NurseStn_Lobby_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
NurseStn_Lobby_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
NurseStn_Lobby_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
NurseStn_Lobby_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
NurseStn_Lobby_Flr_5 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
NurseStn_Lobby_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
NurseStn_Lobby_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
NurseStn_Lobby_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name
|
|
NurseStn_Lobby_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
OR1_Flr_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
OR1_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
OR1_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
OR1_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
OR1_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
OR2_Mult5_Flr_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
OR2_Mult5_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
OR2_Mult5_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
OR2_Mult5_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
OR2_Mult5_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
OR3_Flr_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
OR3_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
OR3_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
OR3_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
OR3_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
OR4_Flr_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
OR4_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
OR4_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
OR4_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
OR4_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Office1_Flr_5 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Office1_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Office1_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Office1_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Office1_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Office1_Mult4_Flr_1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Office1_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Office1_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Office1_Mult4_Flr_1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Office1_Mult4_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Office2_Mult5_Flr_5 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Office2_Mult5_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Office2_Mult5_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Office2_Mult5_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Office2_Mult5_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Office3_Flr_5 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Office3_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Office3_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Office3_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Office3_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Office4_Mult6_Flr_5 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Office4_Mult6_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Office4_Mult6_Flr_5 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Office4_Mult6_Flr_5 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Office4_Mult6_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom1_Mult10_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom1_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom1_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom1_Mult10_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom1_Mult10_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom1_Mult10_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom1_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom1_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom1_Mult10_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom1_Mult10_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom2_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom2_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom2_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom2_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom2_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom2_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom2_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom2_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom2_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom2_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom3_Mult10_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom3_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom3_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom3_Mult10_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom3_Mult10_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom3_Mult10_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom3_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom3_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom3_Mult10_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom3_Mult10_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom4_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom4_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom4_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom4_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom4_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom4_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom4_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom4_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom4_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom4_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom5_Mult10_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom5_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom5_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom5_Mult10_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom5_Mult10_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom5_Mult10_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom5_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom5_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom5_Mult10_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom5_Mult10_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom6_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom6_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom6_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom6_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom6_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom6_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom6_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom6_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom6_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom6_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom7_Mult10_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom7_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom7_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom7_Mult10_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom7_Mult10_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom7_Mult10_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom7_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom7_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom7_Mult10_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom7_Mult10_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom8_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom8_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom8_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom8_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom8_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PatRoom8_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PatRoom8_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PatRoom8_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PatRoom8_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PatRoom8_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
PhysTherapy_Flr_3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
PhysTherapy_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
PhysTherapy_Flr_3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
PhysTherapy_Flr_3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
PhysTherapy_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Radiology_Flr_4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Radiology_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Radiology_Flr_4 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Radiology_Flr_4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Radiology_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
VAV_1_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
VAV_1_HeatCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV_1_HeatCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV_1_CoolC-VAV_1_HeatCNode, !- Air Inlet Node Name
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
VAV_2_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
VAV_2_HeatCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV_2_HeatCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV_2_CoolC-VAV_2_HeatCNode, !- Air Inlet Node Name
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Cooling:Water:DetailedGeometry,
|
|
CAV_1_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Tube Outside Surface Area {m2}
|
|
AUTOSIZE, !- Total Tube Inside Area {m2}
|
|
AUTOSIZE, !- Fin Surface Area {m2}
|
|
AUTOSIZE, !- Minimum Airflow Area {m2}
|
|
AUTOSIZE, !- Coil Depth {m}
|
|
AUTOSIZE, !- Fin Diameter {m}
|
|
0.0015, !- Fin Thickness {m}
|
|
0.01445, !- Tube Inside Diameter {m}
|
|
0.0159, !- Tube Outside Diameter {m}
|
|
386.0, !- Tube Thermal Conductivity {W/m-K}
|
|
204.0, !- Fin Thermal Conductivity {W/m-K}
|
|
0.0018, !- Fin Spacing {m}
|
|
0.026, !- Tube Depth Spacing {m}
|
|
6, !- Number of Tube Rows
|
|
AUTOSIZE, !- Number of Tubes per Row
|
|
CAV_1_CoolCDemand Inlet Node, !- Water Inlet Node Name
|
|
CAV_1_CoolCDemand Outlet Node, !- Water Outlet Node Name
|
|
CAV_1 Humidifier-CAV_1_CoolCNode, !- Air Inlet Node Name
|
|
CAV_1_CoolC-CAV_1_HeatCNode; !- Air Outlet Node Name
|
|
|
|
Coil:Cooling:Water:DetailedGeometry,
|
|
CAV_2_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Tube Outside Surface Area {m2}
|
|
AUTOSIZE, !- Total Tube Inside Area {m2}
|
|
AUTOSIZE, !- Fin Surface Area {m2}
|
|
AUTOSIZE, !- Minimum Airflow Area {m2}
|
|
AUTOSIZE, !- Coil Depth {m}
|
|
AUTOSIZE, !- Fin Diameter {m}
|
|
0.0015, !- Fin Thickness {m}
|
|
0.01445, !- Tube Inside Diameter {m}
|
|
0.0159, !- Tube Outside Diameter {m}
|
|
386.0, !- Tube Thermal Conductivity {W/m-K}
|
|
204.0, !- Fin Thermal Conductivity {W/m-K}
|
|
0.0018, !- Fin Spacing {m}
|
|
0.026, !- Tube Depth Spacing {m}
|
|
6, !- Number of Tube Rows
|
|
AUTOSIZE, !- Number of Tubes per Row
|
|
CAV_2_CoolCDemand Inlet Node, !- Water Inlet Node Name
|
|
CAV_2_CoolCDemand Outlet Node, !- Water Outlet Node Name
|
|
CAV_2 Humidifier-CAV_2_CoolCNode, !- Air Inlet Node Name
|
|
CAV_2_CoolC-CAV_2_HeatCNode; !- Air Outlet Node Name
|
|
|
|
Coil:Cooling:Water:DetailedGeometry,
|
|
VAV_1_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Tube Outside Surface Area {m2}
|
|
AUTOSIZE, !- Total Tube Inside Area {m2}
|
|
AUTOSIZE, !- Fin Surface Area {m2}
|
|
AUTOSIZE, !- Minimum Airflow Area {m2}
|
|
AUTOSIZE, !- Coil Depth {m}
|
|
AUTOSIZE, !- Fin Diameter {m}
|
|
0.0015, !- Fin Thickness {m}
|
|
0.01445, !- Tube Inside Diameter {m}
|
|
0.0159, !- Tube Outside Diameter {m}
|
|
386.0, !- Tube Thermal Conductivity {W/m-K}
|
|
204.0, !- Fin Thermal Conductivity {W/m-K}
|
|
0.0018, !- Fin Spacing {m}
|
|
0.026, !- Tube Depth Spacing {m}
|
|
6, !- Number of Tube Rows
|
|
AUTOSIZE, !- Number of Tubes per Row
|
|
VAV_1_CoolCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV_1_CoolCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV_1_OA-VAV_1_CoolCNode,!- Air Inlet Node Name
|
|
VAV_1_CoolC-VAV_1_HeatCNode; !- Air Outlet Node Name
|
|
|
|
Coil:Cooling:Water:DetailedGeometry,
|
|
VAV_2_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Tube Outside Surface Area {m2}
|
|
AUTOSIZE, !- Total Tube Inside Area {m2}
|
|
AUTOSIZE, !- Fin Surface Area {m2}
|
|
AUTOSIZE, !- Minimum Airflow Area {m2}
|
|
AUTOSIZE, !- Coil Depth {m}
|
|
AUTOSIZE, !- Fin Diameter {m}
|
|
0.0015, !- Fin Thickness {m}
|
|
0.01445, !- Tube Inside Diameter {m}
|
|
0.0159, !- Tube Outside Diameter {m}
|
|
386.0, !- Tube Thermal Conductivity {W/m-K}
|
|
204.0, !- Fin Thermal Conductivity {W/m-K}
|
|
0.0018, !- Fin Spacing {m}
|
|
0.026, !- Tube Depth Spacing {m}
|
|
6, !- Number of Tube Rows
|
|
AUTOSIZE, !- Number of Tubes per Row
|
|
VAV_2_CoolCDemand Inlet Node, !- Water Inlet Node Name
|
|
VAV_2_CoolCDemand Outlet Node, !- Water Outlet Node Name
|
|
VAV_2_OA-VAV_2_CoolCNode,!- Air Inlet Node Name
|
|
VAV_2_CoolC-VAV_2_HeatCNode; !- Air Outlet Node Name
|
|
|
|
Humidifier:Steam:Electric,
|
|
CAV_1 Humidifier, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
3.72E-5, !- Rated Capacity {m3/s}
|
|
100000, !- Rated Power {W}
|
|
0, !- Rated Fan Power {W}
|
|
0, !- Standby Power {W}
|
|
CAV_1_OA-CAV_1 HumidifierNode, !- Air Inlet Node Name
|
|
CAV_1 Humidifier-CAV_1_CoolCNode; !- Air Outlet Node Name
|
|
|
|
Humidifier:Steam:Electric,
|
|
CAV_2 Humidifier, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
3.72E-5, !- Rated Capacity {m3/s}
|
|
100000, !- Rated Power {W}
|
|
0, !- Rated Fan Power {W}
|
|
0, !- Standby Power {W}
|
|
CAV_2_OA-CAV_2 HumidifierNode, !- Air Inlet Node Name
|
|
CAV_2 Humidifier-CAV_2_CoolCNode; !- Air Outlet Node Name
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Basement VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Basement VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Basement VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Basement VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Basement VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Corridor_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Corridor_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Corridor_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Corridor_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Corridor_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Corridor_Flr_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Corridor_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Corridor_Flr_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Corridor_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Corridor_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Corridor_Flr_5 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Corridor_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Corridor_Flr_5 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Corridor_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Corridor_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Corridor_NW_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Corridor_NW_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Corridor_NW_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Corridor_NW_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Corridor_NW_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Corridor_NW_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Corridor_NW_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Corridor_NW_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Corridor_NW_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Corridor_NW_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Corridor_SE_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Corridor_SE_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Corridor_SE_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Corridor_SE_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Corridor_SE_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Corridor_SE_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Corridor_SE_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Corridor_SE_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Corridor_SE_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Corridor_SE_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Dining_Flr_5 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Dining_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Dining_Flr_5 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Dining_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Dining_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
ER_Trauma1_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
ER_Trauma1_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
ER_Trauma1_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
ER_Trauma1_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
ER_Trauma1_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
ER_Trauma2_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
ER_Trauma2_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
ER_Trauma2_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
ER_Trauma2_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
ER_Trauma2_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
ER_Triage_Mult4_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
ER_Triage_Mult4_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
ER_Triage_Mult4_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
ER_Triage_Mult4_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
ER_Triage_Mult4_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
ICU_Flr_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
ICU_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
ICU_Flr_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
ICU_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
ICU_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
IC_PatRoom2_Flr_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
IC_PatRoom2_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
IC_PatRoom2_Flr_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
IC_PatRoom2_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
IC_PatRoom2_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Kitchen_Flr_5 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Kitchen_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Kitchen_Flr_5 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Kitchen_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Kitchen_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Lab_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Lab_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Lab_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Lab_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Lab_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Lab_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Lab_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Lab_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Lab_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Lab_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Lobby_Records_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Lobby_Records_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Lobby_Records_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Lobby_Records_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Lobby_Records_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
NurseStn_Lobby_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NurseStn_Lobby_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
NurseStn_Lobby_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
NurseStn_Lobby_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
NurseStn_Lobby_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
NurseStn_Lobby_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NurseStn_Lobby_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
NurseStn_Lobby_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
NurseStn_Lobby_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
NurseStn_Lobby_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
NurseStn_Lobby_Flr_5 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
NurseStn_Lobby_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
NurseStn_Lobby_Flr_5 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
NurseStn_Lobby_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
NurseStn_Lobby_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
OR1_Flr_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
OR1_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
OR1_Flr_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
OR1_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
OR1_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
OR2_Mult5_Flr_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
OR2_Mult5_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
OR2_Mult5_Flr_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
OR2_Mult5_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
OR2_Mult5_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
OR3_Flr_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
OR3_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
OR3_Flr_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
OR3_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
OR3_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
OR4_Flr_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
OR4_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
OR4_Flr_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
OR4_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
OR4_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Office1_Flr_5 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Office1_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Office1_Flr_5 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Office1_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Office1_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Office1_Mult4_Flr_1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Office1_Mult4_Flr_1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Office1_Mult4_Flr_1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Office1_Mult4_Flr_1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Office1_Mult4_Flr_1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Office2_Mult5_Flr_5 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Office2_Mult5_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Office2_Mult5_Flr_5 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Office2_Mult5_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Office2_Mult5_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Office3_Flr_5 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Office3_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Office3_Flr_5 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Office3_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Office3_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Office4_Mult6_Flr_5 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Office4_Mult6_Flr_5 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Office4_Mult6_Flr_5 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Office4_Mult6_Flr_5 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Office4_Mult6_Flr_5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom1_Mult10_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom1_Mult10_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom1_Mult10_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom1_Mult10_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom1_Mult10_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom1_Mult10_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom1_Mult10_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom1_Mult10_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom1_Mult10_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom1_Mult10_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom2_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom2_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom2_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom2_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom2_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom2_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom2_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom2_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom2_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom2_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom3_Mult10_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom3_Mult10_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom3_Mult10_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom3_Mult10_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom3_Mult10_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom3_Mult10_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom3_Mult10_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom3_Mult10_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom3_Mult10_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom3_Mult10_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom4_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom4_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom4_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom4_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom4_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom4_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom4_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom4_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom4_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom4_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom5_Mult10_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom5_Mult10_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom5_Mult10_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom5_Mult10_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom5_Mult10_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom5_Mult10_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom5_Mult10_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom5_Mult10_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom5_Mult10_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom5_Mult10_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom6_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom6_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom6_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom6_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom6_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom6_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom6_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom6_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom6_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom6_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom7_Mult10_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom7_Mult10_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom7_Mult10_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom7_Mult10_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom7_Mult10_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom7_Mult10_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom7_Mult10_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom7_Mult10_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom7_Mult10_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom7_Mult10_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom8_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom8_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom8_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom8_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom8_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PatRoom8_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PatRoom8_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PatRoom8_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0000, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PatRoom8_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PatRoom8_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
PhysTherapy_Flr_3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
PhysTherapy_Flr_3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
PhysTherapy_Flr_3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
PhysTherapy_Flr_3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
PhysTherapy_Flr_3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Radiology_Flr_4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Radiology_Flr_4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Radiology_Flr_4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Radiology_Flr_4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Radiology_Flr_4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
AUTOCALCULATE, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
AUTOCALCULATE; !- Maximum Flow Fraction During Reheat
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Basement Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Basement VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Corridor_Flr_1 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Corridor_Flr_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Corridor_Flr_2 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Corridor_Flr_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Corridor_Flr_5 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Corridor_Flr_5 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Corridor_NW_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Corridor_NW_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Corridor_NW_Flr_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Corridor_NW_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Corridor_SE_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Corridor_SE_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Corridor_SE_Flr_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Corridor_SE_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Dining_Flr_5 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
Fan:ZoneExhaust, !- Zone Equipment 1 Object Type
|
|
Dining_Flr_5 Exhaust Fan,!- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
, !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type
|
|
Dining_Flr_5 VAV Box, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2, !- Zone Equipment 2 Heating or No-Load Sequence
|
|
, !- Zone Equipment 2 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 2 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
ER_Exam1_Mult4_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
ER_Exam1_Mult4_Flr_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
ER_Exam3_Mult4_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
ER_Exam3_Mult4_Flr_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
ER_NurseStn_Lobby_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
ER_Trauma1_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
ER_Trauma1_Flr_1 VAV Box,!- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
ER_Trauma2_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
ER_Trauma2_Flr_1 VAV Box,!- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
ER_Triage_Mult4_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
ER_Triage_Mult4_Flr_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
ICU_Flr_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
ICU_Flr_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
ICU_NurseStn_Lobby_Flr_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
IC_PatRoom1_Mult5_Flr_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
IC_PatRoom2_Flr_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
IC_PatRoom2_Flr_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
IC_PatRoom3_Mult6_Flr_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Kitchen_Flr_5 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
Fan:ZoneExhaust, !- Zone Equipment 1 Object Type
|
|
Kitchen_Flr_5 Exhaust Fan, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
, !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 2 Object Type
|
|
Kitchen_Flr_5 VAV Box, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2, !- Zone Equipment 2 Heating or No-Load Sequence
|
|
, !- Zone Equipment 2 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 2 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Lab_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Lab_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Lab_Flr_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Lab_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Lobby_Records_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Lobby_Records_Flr_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
NurseStn_Lobby_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
NurseStn_Lobby_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
NurseStn_Lobby_Flr_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
NurseStn_Lobby_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
NurseStn_Lobby_Flr_5 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
NurseStn_Lobby_Flr_5 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
OR1_Flr_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
OR1_Flr_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
OR2_Mult5_Flr_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
OR2_Mult5_Flr_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
OR3_Flr_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
OR3_Flr_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
OR4_Flr_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
OR4_Flr_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
OR_NurseStn_Lobby_Flr_2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Office1_Flr_5 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Office1_Flr_5 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Office1_Mult4_Flr_1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Office1_Mult4_Flr_1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Office2_Mult5_Flr_5 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Office2_Mult5_Flr_5 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Office3_Flr_5 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Office3_Flr_5 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Office4_Mult6_Flr_5 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Office4_Mult6_Flr_5 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom1_Mult10_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom1_Mult10_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom1_Mult10_Flr_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom1_Mult10_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom2_Flr_3 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom2_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom2_Flr_4 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom2_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom3_Mult10_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom3_Mult10_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom3_Mult10_Flr_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom3_Mult10_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom4_Flr_3 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom4_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom4_Flr_4 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom4_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom5_Mult10_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom5_Mult10_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom5_Mult10_Flr_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom5_Mult10_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom6_Flr_3 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom6_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom6_Flr_4 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom6_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom7_Mult10_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom7_Mult10_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom7_Mult10_Flr_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom7_Mult10_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom8_Flr_3 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom8_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PatRoom8_Flr_4 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PatRoom8_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
PhysTherapy_Flr_3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
PhysTherapy_Flr_3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Radiology_Flr_4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Radiology_Flr_4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
! ***SIZING & CONTROLS***
|
|
|
|
Sizing:Zone,
|
|
Basement, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Basement, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Basement, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
Sizing:Zone,
|
|
Corridor_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Corridor_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Corridor_Flr_1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.00025; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
! Cooling min. flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Corridor_Flr_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Corridor_Flr_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
1.349328, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Corridor_Flr_2, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.00025; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
Sizing:Zone,
|
|
Corridor_Flr_5, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Corridor_Flr_5, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Corridor_Flr_5, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.00025; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
! Cooling min. flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Corridor_NW_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Corridor_NW_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
1.343822, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Corridor_NW_Flr_3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.00025; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
! Cooling min. flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Corridor_NW_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Corridor_NW_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
1.343822, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Corridor_NW_Flr_4, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.00025; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
! Cooling min. flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Corridor_SE_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Corridor_SE_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
1.343822, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Corridor_SE_Flr_3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.00025; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
! Cooling min. flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Corridor_SE_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Corridor_SE_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
1.343822, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Corridor_SE_Flr_4, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.00025; !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
|
|
Sizing:Zone,
|
|
Dining_Flr_5, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Dining_Flr_5, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Dining_Flr_5, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 12 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA ER_Exam1_Mult4_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.396533, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA ER_Exam1_Mult4_Flr_1, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.066089; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 12 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA ER_Exam3_Mult4_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.396533, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA ER_Exam3_Mult4_Flr_1, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.066089; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA ER_NurseStn_Lobby_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA ER_NurseStn_Lobby_Flr_1, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 12 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
ER_Trauma1_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA ER_Trauma1_Flr_1,!- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.396533, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA ER_Trauma1_Flr_1,!- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.066089; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 12 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
ER_Trauma2_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA ER_Trauma2_Flr_1,!- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.396533, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA ER_Trauma2_Flr_1,!- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.066089; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 12 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
ER_Triage_Mult4_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA ER_Triage_Mult4_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.396533, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA ER_Triage_Mult4_Flr_1, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.066089; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
ICU_Flr_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA ICU_Flr_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
4.39605, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA ICU_Flr_2, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
1.46535; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA ICU_NurseStn_Lobby_Flr_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA ICU_NurseStn_Lobby_Flr_2, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA IC_PatRoom1_Mult5_Flr_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.148683, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA IC_PatRoom1_Mult5_Flr_2, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.049561; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
IC_PatRoom2_Flr_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA IC_PatRoom2_Flr_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.198267, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA IC_PatRoom2_Flr_2, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.066089; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA IC_PatRoom3_Mult6_Flr_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.148683, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA IC_PatRoom3_Mult6_Flr_2, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.049561; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Kitchen_Flr_5, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Kitchen_Flr_5, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Kitchen_Flr_5, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
1.75102958993727; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Lab_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Lab_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
1.882, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Lab_Flr_3, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
1.882; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Lab_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Lab_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
1.882, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Lab_Flr_4, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
1.882; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Lobby_Records_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Lobby_Records_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Lobby_Records_Flr_1, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
Sizing:Zone,
|
|
NurseStn_Lobby_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA NurseStn_Lobby_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA NurseStn_Lobby_Flr_3, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
Sizing:Zone,
|
|
NurseStn_Lobby_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA NurseStn_Lobby_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA NurseStn_Lobby_Flr_4, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
Sizing:Zone,
|
|
NurseStn_Lobby_Flr_5, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA NurseStn_Lobby_Flr_5, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA NurseStn_Lobby_Flr_5, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
! Min. OA flow = 3 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 15 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
OR1_Flr_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA OR1_Flr_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.991292, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA OR1_Flr_2, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.198258; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 3 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 15 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
OR2_Mult5_Flr_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA OR2_Mult5_Flr_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.991292, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA OR2_Mult5_Flr_2, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.198258; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 3 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 15 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
OR3_Flr_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA OR3_Flr_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.991292, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA OR3_Flr_2, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.198258; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 3 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 15 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
OR4_Flr_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA OR4_Flr_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
3.965417, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA OR4_Flr_2, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.793083; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA OR_NurseStn_Lobby_Flr_2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA OR_NurseStn_Lobby_Flr_2, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
Sizing:Zone,
|
|
Office1_Flr_5, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Office1_Flr_5, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Office1_Flr_5, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
Sizing:Zone,
|
|
Office1_Mult4_Flr_1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Office1_Mult4_Flr_1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Office1_Mult4_Flr_1, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
Sizing:Zone,
|
|
Office2_Mult5_Flr_5, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Office2_Mult5_Flr_5, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Office2_Mult5_Flr_5, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
Sizing:Zone,
|
|
Office3_Flr_5, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Office3_Flr_5, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Office3_Flr_5, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
Sizing:Zone,
|
|
Office4_Mult6_Flr_5, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Office4_Mult6_Flr_5, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDay, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Office4_Mult6_Flr_5, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom1_Mult10_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.148683, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom1_Mult10_Flr_3, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.049561; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom1_Mult10_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.148683, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom1_Mult10_Flr_4, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.049561; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom2_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom2_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.24785, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom2_Flr_3, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.082617; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom2_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom2_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.24785, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom2_Flr_4, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.082617; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom3_Mult10_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.143767, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom3_Mult10_Flr_3, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.047922; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom3_Mult10_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.143767, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom3_Mult10_Flr_4, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.047922; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom4_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom4_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.24785, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom4_Flr_3, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.082617; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom4_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom4_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.24785, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom4_Flr_4, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.082617; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom5_Mult10_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.148683, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom5_Mult10_Flr_3, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.049561; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom5_Mult10_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.148683, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom5_Mult10_Flr_4, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.049561; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom6_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom6_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.198267, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom6_Flr_3, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.066089; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom6_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom6_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.198267, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom6_Flr_4, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.066089; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom7_Mult10_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.143767, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom7_Mult10_Flr_3, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.047922; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom7_Mult10_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.143767, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom7_Mult10_Flr_4, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.047922; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom8_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom8_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.198267, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom8_Flr_3, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.066089; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PatRoom8_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PatRoom8_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.198267, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PatRoom8_Flr_4, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.066089; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
PhysTherapy_Flr_3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA PhysTherapy_Flr_3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
3.4697, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA PhysTherapy_Flr_3, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.008; !- Outdoor Air Flow per Person {m3/s-person}
|
|
|
|
! Min. OA flow = 3 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 15 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Radiology_Flr_4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Radiology_Flr_4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
8.67425, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Radiology_Flr_4, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
1.73485; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
ZoneControl:Thermostat,
|
|
Basement Thermostat, !- Name
|
|
Basement, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Basement DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Corridor_Flr_1 Thermostat, !- Name
|
|
Corridor_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Corridor_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Corridor_Flr_2 Thermostat, !- Name
|
|
Corridor_Flr_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Corridor_Flr_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Corridor_Flr_5 Thermostat, !- Name
|
|
Corridor_Flr_5, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Corridor_Flr_5 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Corridor_NW_Flr_3 Thermostat, !- Name
|
|
Corridor_NW_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Corridor_NW_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Corridor_NW_Flr_4 Thermostat, !- Name
|
|
Corridor_NW_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Corridor_NW_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Corridor_SE_Flr_3 Thermostat, !- Name
|
|
Corridor_SE_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Corridor_SE_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Corridor_SE_Flr_4 Thermostat, !- Name
|
|
Corridor_SE_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Corridor_SE_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Dining_Flr_5 Thermostat, !- Name
|
|
Dining_Flr_5, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Dining_Flr_5 DualSPSched;!- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
ER_Exam1_Mult4_Flr_1 Thermostat, !- Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
ER_Exam1_Mult4_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
ER_Exam3_Mult4_Flr_1 Thermostat, !- Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
ER_Exam3_Mult4_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
ER_NurseStn_Lobby_Flr_1 Thermostat, !- Name
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
ER_NurseStn_Lobby_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
ER_Trauma1_Flr_1 Thermostat, !- Name
|
|
ER_Trauma1_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
ER_Trauma1_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
ER_Trauma2_Flr_1 Thermostat, !- Name
|
|
ER_Trauma2_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
ER_Trauma2_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
ER_Triage_Mult4_Flr_1 Thermostat, !- Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
ER_Triage_Mult4_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
ICU_Flr_2 Thermostat, !- Name
|
|
ICU_Flr_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
ICU_Flr_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
ICU_NurseStn_Lobby_Flr_2 Thermostat, !- Name
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
ICU_NurseStn_Lobby_Flr_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
IC_PatRoom1_Mult5_Flr_2 Thermostat, !- Name
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
IC_PatRoom1_Mult5_Flr_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
IC_PatRoom2_Flr_2 Thermostat, !- Name
|
|
IC_PatRoom2_Flr_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
IC_PatRoom2_Flr_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
IC_PatRoom3_Mult6_Flr_2 Thermostat, !- Name
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
IC_PatRoom3_Mult6_Flr_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Kitchen_Flr_5 Thermostat,!- Name
|
|
Kitchen_Flr_5, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Kitchen_Flr_5 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Lab_Flr_3 Thermostat, !- Name
|
|
Lab_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Lab_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Lab_Flr_4 Thermostat, !- Name
|
|
Lab_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Lab_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Lobby_Records_Flr_1 Thermostat, !- Name
|
|
Lobby_Records_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Lobby_Records_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
NurseStn_Lobby_Flr_3 Thermostat, !- Name
|
|
NurseStn_Lobby_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
NurseStn_Lobby_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
NurseStn_Lobby_Flr_4 Thermostat, !- Name
|
|
NurseStn_Lobby_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
NurseStn_Lobby_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
NurseStn_Lobby_Flr_5 Thermostat, !- Name
|
|
NurseStn_Lobby_Flr_5, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
NurseStn_Lobby_Flr_5 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
OR1_Flr_2 Thermostat, !- Name
|
|
OR1_Flr_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
OR1_Flr_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
OR2_Mult5_Flr_2 Thermostat, !- Name
|
|
OR2_Mult5_Flr_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
OR2_Mult5_Flr_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
OR3_Flr_2 Thermostat, !- Name
|
|
OR3_Flr_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
OR3_Flr_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
OR4_Flr_2 Thermostat, !- Name
|
|
OR4_Flr_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
OR4_Flr_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
OR_NurseStn_Lobby_Flr_2 Thermostat, !- Name
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
OR_NurseStn_Lobby_Flr_2 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Office1_Flr_5 Thermostat,!- Name
|
|
Office1_Flr_5, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Office1_Flr_5 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Office1_Mult4_Flr_1 Thermostat, !- Name
|
|
Office1_Mult4_Flr_1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Office1_Mult4_Flr_1 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Office2_Mult5_Flr_5 Thermostat, !- Name
|
|
Office2_Mult5_Flr_5, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Office2_Mult5_Flr_5 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Office3_Flr_5 Thermostat,!- Name
|
|
Office3_Flr_5, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Office3_Flr_5 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Office4_Mult6_Flr_5 Thermostat, !- Name
|
|
Office4_Mult6_Flr_5, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Office4_Mult6_Flr_5 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom1_Mult10_Flr_3 Thermostat, !- Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom1_Mult10_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom1_Mult10_Flr_4 Thermostat, !- Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom1_Mult10_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom2_Flr_3 Thermostat, !- Name
|
|
PatRoom2_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom2_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom2_Flr_4 Thermostat, !- Name
|
|
PatRoom2_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom2_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom3_Mult10_Flr_3 Thermostat, !- Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom3_Mult10_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom3_Mult10_Flr_4 Thermostat, !- Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom3_Mult10_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom4_Flr_3 Thermostat, !- Name
|
|
PatRoom4_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom4_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom4_Flr_4 Thermostat, !- Name
|
|
PatRoom4_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom4_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom5_Mult10_Flr_3 Thermostat, !- Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom5_Mult10_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom5_Mult10_Flr_4 Thermostat, !- Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom5_Mult10_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom6_Flr_3 Thermostat, !- Name
|
|
PatRoom6_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom6_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom6_Flr_4 Thermostat, !- Name
|
|
PatRoom6_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom6_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom7_Mult10_Flr_3 Thermostat, !- Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom7_Mult10_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom7_Mult10_Flr_4 Thermostat, !- Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom7_Mult10_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom8_Flr_3 Thermostat, !- Name
|
|
PatRoom8_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom8_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PatRoom8_Flr_4 Thermostat, !- Name
|
|
PatRoom8_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PatRoom8_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
PhysTherapy_Flr_3 Thermostat, !- Name
|
|
PhysTherapy_Flr_3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
PhysTherapy_Flr_3 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Radiology_Flr_4 Thermostat, !- Name
|
|
Radiology_Flr_4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Radiology_Flr_4 DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Humidistat,
|
|
ER_Exam3_Mult4_Flr_1 Humidistat, !- Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone Name
|
|
MinRelHumSetSch, !- Humidifying Relative Humidity Setpoint Schedule Name
|
|
MaxRelHumSetSch; !- Dehumidifying Relative Humidity Setpoint Schedule Name
|
|
|
|
ZoneControl:Humidistat,
|
|
OR2_Mult5_Flr_2 Humidistat, !- Name
|
|
OR2_Mult5_Flr_2, !- Zone Name
|
|
MinRelHumSetSch, !- Humidifying Relative Humidity Setpoint Schedule Name
|
|
MaxRelHumSetSch; !- Dehumidifying Relative Humidity Setpoint Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Basement DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Corridor_Flr_1 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Corridor_Flr_2 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Corridor_Flr_5 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Corridor_NW_Flr_3 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Corridor_NW_Flr_4 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Corridor_SE_Flr_3 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Corridor_SE_Flr_4 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Dining_Flr_5 DualSPSched,!- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
ER_Exam1_Mult4_Flr_1 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
ER_Exam3_Mult4_Flr_1 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
ER_NurseStn_Lobby_Flr_1 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
ER_Trauma1_Flr_1 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
ER_Trauma2_Flr_1 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
ER_Triage_Mult4_Flr_1 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
ICU_Flr_2 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
ICU_NurseStn_Lobby_Flr_2 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
IC_PatRoom1_Mult5_Flr_2 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
IC_PatRoom2_Flr_2 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
IC_PatRoom3_Mult6_Flr_2 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Kitchen_Flr_5 DualSPSched, !- Name
|
|
Kitchen_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
Kitchen_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Lab_Flr_3 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Lab_Flr_4 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Lobby_Records_Flr_1 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
NurseStn_Lobby_Flr_3 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
NurseStn_Lobby_Flr_4 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
NurseStn_Lobby_Flr_5 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
OR1_Flr_2 DualSPSched, !- Name
|
|
OR_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
OR_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
OR2_Mult5_Flr_2 DualSPSched, !- Name
|
|
OR_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
OR_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
OR3_Flr_2 DualSPSched, !- Name
|
|
OR_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
OR_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
OR4_Flr_2 DualSPSched, !- Name
|
|
OR_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
OR_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
OR_NurseStn_Lobby_Flr_2 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Office1_Flr_5 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Office1_Mult4_Flr_1 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Office2_Mult5_Flr_5 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Office3_Flr_5 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Office4_Mult6_Flr_5 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom1_Mult10_Flr_3 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom1_Mult10_Flr_4 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom2_Flr_3 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom2_Flr_4 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom3_Mult10_Flr_3 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom3_Mult10_Flr_4 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom4_Flr_3 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom4_Flr_4 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom5_Mult10_Flr_3 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom5_Mult10_Flr_4 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom6_Flr_3 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom6_Flr_4 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom7_Mult10_Flr_3 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom7_Mult10_Flr_4 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom8_Flr_3 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PatRoom8_Flr_4 DualSPSched, !- Name
|
|
CRITICAL_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CRITICAL_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
PhysTherapy_Flr_3 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Radiology_Flr_4 DualSPSched, !- Name
|
|
ADMIN_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
ADMIN_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
Sizing:System,
|
|
CAV_1, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
1.0, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
7.2000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
7.2, !- Central Cooling Design Supply Air Temperature {C}
|
|
16.0000, !- Central Heating Design Supply Air Temperature {C}
|
|
NonCoincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.007, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.007, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
VAV; !- Central Cooling Capacity Control Method
|
|
|
|
Sizing:System,
|
|
CAV_2, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
1.0, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
7.2000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
7.2, !- Central Cooling Design Supply Air Temperature {C}
|
|
16.0000, !- Central Heating Design Supply Air Temperature {C}
|
|
NonCoincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.007, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.007, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
VAV; !- Central Cooling Capacity Control Method
|
|
|
|
Sizing:System,
|
|
VAV_1, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
0.3, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
11.1000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
7.2, !- Central Cooling Design Supply Air Temperature {C}
|
|
16.0000, !- Central Heating Design Supply Air Temperature {C}
|
|
Coincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.007, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.007, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
VAV; !- Central Cooling Capacity Control Method
|
|
|
|
Sizing:System,
|
|
VAV_2, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
0.3, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
11.1000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
7.2, !- Central Cooling Design Supply Air Temperature {C}
|
|
16.0000, !- Central Heating Design Supply Air Temperature {C}
|
|
Coincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.007, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.007, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
0.0, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
0.0, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
VAV; !- Central Cooling Capacity Control Method
|
|
|
|
Controller:OutdoorAir,
|
|
CAV_1_OA_Controller, !- Name
|
|
CAV_1_OARelief Node, !- Relief Air Outlet Node Name
|
|
CAV_1 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
CAV_1_OA-CAV_1 HumidifierNode, !- Mixed Air Node Name
|
|
CAV_1_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
NoEconomizer, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
-100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
NoLockout, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
ALWAYS_ON, !- Minimum Outdoor Air Schedule Name
|
|
CAV_OAminFracSchedule; !- Minimum Fraction of Outdoor Air Schedule Name
|
|
|
|
Controller:OutdoorAir,
|
|
CAV_2_OA_Controller, !- Name
|
|
CAV_2_OARelief Node, !- Relief Air Outlet Node Name
|
|
CAV_2 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
CAV_2_OA-CAV_2 HumidifierNode, !- Mixed Air Node Name
|
|
CAV_2_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
NoEconomizer, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
-100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
NoLockout, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
ALWAYS_ON, !- Minimum Outdoor Air Schedule Name
|
|
CAV_OAminFracSchedule; !- Minimum Fraction of Outdoor Air Schedule Name
|
|
|
|
Controller:OutdoorAir,
|
|
VAV_1_OA_Controller, !- Name
|
|
VAV_1_OARelief Node, !- Relief Air Outlet Node Name
|
|
VAV_1 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
VAV_1_OA-VAV_1_CoolCNode,!- Mixed Air Node Name
|
|
VAV_1_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
-100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
NoLockout, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
ALWAYS_ON, !- Minimum Outdoor Air Schedule Name
|
|
VAV_OAminFracSchedule; !- Minimum Fraction of Outdoor Air Schedule Name
|
|
|
|
Controller:OutdoorAir,
|
|
VAV_2_OA_Controller, !- Name
|
|
VAV_2_OARelief Node, !- Relief Air Outlet Node Name
|
|
VAV_2 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
VAV_2_OA-VAV_2_CoolCNode,!- Mixed Air Node Name
|
|
VAV_2_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
-100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
NoLockout, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
ALWAYS_ON, !- Minimum Outdoor Air Schedule Name
|
|
VAV_OAminFracSchedule; !- Minimum Fraction of Outdoor Air Schedule Name
|
|
|
|
Controller:WaterCoil,
|
|
CAV_1_CoolC_Controller, !- Name
|
|
TemperatureAndHumidityRatio, !- Control Variable
|
|
Reverse, !- Action
|
|
Flow, !- Actuator Variable
|
|
CAV_1_CoolC-CAV_1_HeatCNode, !- Sensor Node Name
|
|
CAV_1_CoolCDemand Inlet Node, !- Actuator Node Name
|
|
, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
CAV_1_HeatC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Normal, !- Action
|
|
Flow, !- Actuator Variable
|
|
CAV_1_HeatC-CAV_1_FanNode, !- Sensor Node Name
|
|
CAV_1_HeatCDemand Inlet Node, !- Actuator Node Name
|
|
0.0001, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
CAV_2_CoolC_Controller, !- Name
|
|
TemperatureAndHumidityRatio, !- Control Variable
|
|
Reverse, !- Action
|
|
Flow, !- Actuator Variable
|
|
CAV_2_CoolC-CAV_2_HeatCNode, !- Sensor Node Name
|
|
CAV_2_CoolCDemand Inlet Node, !- Actuator Node Name
|
|
, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
CAV_2_HeatC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Normal, !- Action
|
|
Flow, !- Actuator Variable
|
|
CAV_2_HeatC-CAV_2_FanNode, !- Sensor Node Name
|
|
CAV_2_HeatCDemand Inlet Node, !- Actuator Node Name
|
|
0.0001, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
VAV_1_CoolC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Reverse, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV_1_CoolC-VAV_1_HeatCNode, !- Sensor Node Name
|
|
VAV_1_CoolCDemand Inlet Node, !- Actuator Node Name
|
|
, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
VAV_1_HeatC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Normal, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Sensor Node Name
|
|
VAV_1_HeatCDemand Inlet Node, !- Actuator Node Name
|
|
0.0001, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
VAV_2_CoolC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Reverse, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV_2_CoolC-VAV_2_HeatCNode, !- Sensor Node Name
|
|
VAV_2_CoolCDemand Inlet Node, !- Actuator Node Name
|
|
, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
VAV_2_HeatC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Normal, !- Action
|
|
Flow, !- Actuator Variable
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Sensor Node Name
|
|
VAV_2_HeatCDemand Inlet Node, !- Actuator Node Name
|
|
0.0001, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
! ***AIR LOOPS***
|
|
|
|
AirLoopHVAC,
|
|
CAV_1, !- Name
|
|
CAV_1_Controllers, !- Controller List Name
|
|
CAV_1 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
CAV_1 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
CAV_1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
CAV_1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
CAV_1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
CAV_1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
AirLoopHVAC,
|
|
CAV_2, !- Name
|
|
CAV_2_Controllers, !- Controller List Name
|
|
CAV_2 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
CAV_2 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
CAV_2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
CAV_2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
CAV_2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
CAV_2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
AirLoopHVAC,
|
|
VAV_1, !- Name
|
|
VAV_1_Controllers, !- Controller List Name
|
|
VAV_1 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
VAV_1 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
VAV_1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
VAV_1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
VAV_1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
VAV_1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
AirLoopHVAC,
|
|
VAV_2, !- Name
|
|
VAV_2_Controllers, !- Controller List Name
|
|
VAV_2 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
VAV_2 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
VAV_2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
VAV_2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
VAV_2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
VAV_2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
! ***CONNECTIONS***
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Basement, !- Zone Name
|
|
Basement Equipment, !- Zone Conditioning Equipment List Name
|
|
Basement Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Basement Air Node, !- Zone Air Node Name
|
|
Basement Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Corridor_Flr_1, !- Zone Name
|
|
Corridor_Flr_1 Equipment,!- Zone Conditioning Equipment List Name
|
|
Corridor_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Corridor_Flr_1 Air Node, !- Zone Air Node Name
|
|
Corridor_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Corridor_Flr_2, !- Zone Name
|
|
Corridor_Flr_2 Equipment,!- Zone Conditioning Equipment List Name
|
|
Corridor_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Corridor_Flr_2 Air Node, !- Zone Air Node Name
|
|
Corridor_Flr_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Corridor_Flr_5, !- Zone Name
|
|
Corridor_Flr_5 Equipment,!- Zone Conditioning Equipment List Name
|
|
Corridor_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Corridor_Flr_5 Air Node, !- Zone Air Node Name
|
|
Corridor_Flr_5 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Corridor_NW_Flr_3, !- Zone Name
|
|
Corridor_NW_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Corridor_NW_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Corridor_NW_Flr_3 Air Node, !- Zone Air Node Name
|
|
Corridor_NW_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Corridor_NW_Flr_4, !- Zone Name
|
|
Corridor_NW_Flr_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
Corridor_NW_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Corridor_NW_Flr_4 Air Node, !- Zone Air Node Name
|
|
Corridor_NW_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Corridor_SE_Flr_3, !- Zone Name
|
|
Corridor_SE_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Corridor_SE_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Corridor_SE_Flr_3 Air Node, !- Zone Air Node Name
|
|
Corridor_SE_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Corridor_SE_Flr_4, !- Zone Name
|
|
Corridor_SE_Flr_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
Corridor_SE_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Corridor_SE_Flr_4 Air Node, !- Zone Air Node Name
|
|
Corridor_SE_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Dining_Flr_5, !- Zone Name
|
|
Dining_Flr_5 Equipment, !- Zone Conditioning Equipment List Name
|
|
Dining_Flr_5 Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
Dining_Flr_5 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Dining_Flr_5 Air Node, !- Zone Air Node Name
|
|
Dining_Flr_5 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
ER_Exam1_Mult4_Flr_1, !- Zone Name
|
|
ER_Exam1_Mult4_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
ER_Exam1_Mult4_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
ER_Exam1_Mult4_Flr_1 Air Node, !- Zone Air Node Name
|
|
ER_Exam1_Mult4_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
ER_Exam3_Mult4_Flr_1, !- Zone Name
|
|
ER_Exam3_Mult4_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
ER_Exam3_Mult4_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
ER_Exam3_Mult4_Flr_1 Air Node, !- Zone Air Node Name
|
|
ER_Exam3_Mult4_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
ER_NurseStn_Lobby_Flr_1, !- Zone Name
|
|
ER_NurseStn_Lobby_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
ER_NurseStn_Lobby_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
ER_NurseStn_Lobby_Flr_1 Air Node, !- Zone Air Node Name
|
|
ER_NurseStn_Lobby_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
ER_Trauma1_Flr_1, !- Zone Name
|
|
ER_Trauma1_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
ER_Trauma1_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
ER_Trauma1_Flr_1 Air Node, !- Zone Air Node Name
|
|
ER_Trauma1_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
ER_Trauma2_Flr_1, !- Zone Name
|
|
ER_Trauma2_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
ER_Trauma2_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
ER_Trauma2_Flr_1 Air Node, !- Zone Air Node Name
|
|
ER_Trauma2_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
ER_Triage_Mult4_Flr_1, !- Zone Name
|
|
ER_Triage_Mult4_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
ER_Triage_Mult4_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
ER_Triage_Mult4_Flr_1 Air Node, !- Zone Air Node Name
|
|
ER_Triage_Mult4_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
ICU_Flr_2, !- Zone Name
|
|
ICU_Flr_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
ICU_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
ICU_Flr_2 Air Node, !- Zone Air Node Name
|
|
ICU_Flr_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
ICU_NurseStn_Lobby_Flr_2,!- Zone Name
|
|
ICU_NurseStn_Lobby_Flr_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
ICU_NurseStn_Lobby_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
ICU_NurseStn_Lobby_Flr_2 Air Node, !- Zone Air Node Name
|
|
ICU_NurseStn_Lobby_Flr_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
IC_PatRoom1_Mult5_Flr_2, !- Zone Name
|
|
IC_PatRoom1_Mult5_Flr_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
IC_PatRoom1_Mult5_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
IC_PatRoom1_Mult5_Flr_2 Air Node, !- Zone Air Node Name
|
|
IC_PatRoom1_Mult5_Flr_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
IC_PatRoom2_Flr_2, !- Zone Name
|
|
IC_PatRoom2_Flr_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
IC_PatRoom2_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
IC_PatRoom2_Flr_2 Air Node, !- Zone Air Node Name
|
|
IC_PatRoom2_Flr_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
IC_PatRoom3_Mult6_Flr_2, !- Zone Name
|
|
IC_PatRoom3_Mult6_Flr_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
IC_PatRoom3_Mult6_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
IC_PatRoom3_Mult6_Flr_2 Air Node, !- Zone Air Node Name
|
|
IC_PatRoom3_Mult6_Flr_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Kitchen_Flr_5, !- Zone Name
|
|
Kitchen_Flr_5 Equipment, !- Zone Conditioning Equipment List Name
|
|
Kitchen_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Kitchen_Flr_5 Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Kitchen_Flr_5 Air Node, !- Zone Air Node Name
|
|
Kitchen_Flr_5 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Lab_Flr_3, !- Zone Name
|
|
Lab_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Lab_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Lab_Flr_3 Air Node, !- Zone Air Node Name
|
|
Lab_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Lab_Flr_4, !- Zone Name
|
|
Lab_Flr_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
Lab_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Lab_Flr_4 Air Node, !- Zone Air Node Name
|
|
Lab_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Lobby_Records_Flr_1, !- Zone Name
|
|
Lobby_Records_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Lobby_Records_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Lobby_Records_Flr_1 Air Node, !- Zone Air Node Name
|
|
Lobby_Records_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
NurseStn_Lobby_Flr_3, !- Zone Name
|
|
NurseStn_Lobby_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
NurseStn_Lobby_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
NurseStn_Lobby_Flr_3 Air Node, !- Zone Air Node Name
|
|
NurseStn_Lobby_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
NurseStn_Lobby_Flr_4, !- Zone Name
|
|
NurseStn_Lobby_Flr_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
NurseStn_Lobby_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
NurseStn_Lobby_Flr_4 Air Node, !- Zone Air Node Name
|
|
NurseStn_Lobby_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
NurseStn_Lobby_Flr_5, !- Zone Name
|
|
NurseStn_Lobby_Flr_5 Equipment, !- Zone Conditioning Equipment List Name
|
|
NurseStn_Lobby_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
NurseStn_Lobby_Flr_5 Air Node, !- Zone Air Node Name
|
|
NurseStn_Lobby_Flr_5 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
OR1_Flr_2, !- Zone Name
|
|
OR1_Flr_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
OR1_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
OR1_Flr_2 Air Node, !- Zone Air Node Name
|
|
OR1_Flr_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
OR2_Mult5_Flr_2, !- Zone Name
|
|
OR2_Mult5_Flr_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
OR2_Mult5_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
OR2_Mult5_Flr_2 Air Node,!- Zone Air Node Name
|
|
OR2_Mult5_Flr_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
OR3_Flr_2, !- Zone Name
|
|
OR3_Flr_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
OR3_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
OR3_Flr_2 Air Node, !- Zone Air Node Name
|
|
OR3_Flr_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
OR4_Flr_2, !- Zone Name
|
|
OR4_Flr_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
OR4_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
OR4_Flr_2 Air Node, !- Zone Air Node Name
|
|
OR4_Flr_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
OR_NurseStn_Lobby_Flr_2, !- Zone Name
|
|
OR_NurseStn_Lobby_Flr_2 Equipment, !- Zone Conditioning Equipment List Name
|
|
OR_NurseStn_Lobby_Flr_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
OR_NurseStn_Lobby_Flr_2 Air Node, !- Zone Air Node Name
|
|
OR_NurseStn_Lobby_Flr_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Office1_Flr_5, !- Zone Name
|
|
Office1_Flr_5 Equipment, !- Zone Conditioning Equipment List Name
|
|
Office1_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Office1_Flr_5 Air Node, !- Zone Air Node Name
|
|
Office1_Flr_5 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Office1_Mult4_Flr_1, !- Zone Name
|
|
Office1_Mult4_Flr_1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Office1_Mult4_Flr_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Office1_Mult4_Flr_1 Air Node, !- Zone Air Node Name
|
|
Office1_Mult4_Flr_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Office2_Mult5_Flr_5, !- Zone Name
|
|
Office2_Mult5_Flr_5 Equipment, !- Zone Conditioning Equipment List Name
|
|
Office2_Mult5_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Office2_Mult5_Flr_5 Air Node, !- Zone Air Node Name
|
|
Office2_Mult5_Flr_5 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Office3_Flr_5, !- Zone Name
|
|
Office3_Flr_5 Equipment, !- Zone Conditioning Equipment List Name
|
|
Office3_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Office3_Flr_5 Air Node, !- Zone Air Node Name
|
|
Office3_Flr_5 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Office4_Mult6_Flr_5, !- Zone Name
|
|
Office4_Mult6_Flr_5 Equipment, !- Zone Conditioning Equipment List Name
|
|
Office4_Mult6_Flr_5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Office4_Mult6_Flr_5 Air Node, !- Zone Air Node Name
|
|
Office4_Mult6_Flr_5 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom1_Mult10_Flr_3, !- Zone Name
|
|
PatRoom1_Mult10_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
PatRoom1_Mult10_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom1_Mult10_Flr_3 Air Node, !- Zone Air Node Name
|
|
PatRoom1_Mult10_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom1_Mult10_Flr_4, !- Zone Name
|
|
PatRoom1_Mult10_Flr_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
PatRoom1_Mult10_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom1_Mult10_Flr_4 Air Node, !- Zone Air Node Name
|
|
PatRoom1_Mult10_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom2_Flr_3, !- Zone Name
|
|
PatRoom2_Flr_3 Equipment,!- Zone Conditioning Equipment List Name
|
|
PatRoom2_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom2_Flr_3 Air Node, !- Zone Air Node Name
|
|
PatRoom2_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom2_Flr_4, !- Zone Name
|
|
PatRoom2_Flr_4 Equipment,!- Zone Conditioning Equipment List Name
|
|
PatRoom2_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom2_Flr_4 Air Node, !- Zone Air Node Name
|
|
PatRoom2_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom3_Mult10_Flr_3, !- Zone Name
|
|
PatRoom3_Mult10_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
PatRoom3_Mult10_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom3_Mult10_Flr_3 Air Node, !- Zone Air Node Name
|
|
PatRoom3_Mult10_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom3_Mult10_Flr_4, !- Zone Name
|
|
PatRoom3_Mult10_Flr_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
PatRoom3_Mult10_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom3_Mult10_Flr_4 Air Node, !- Zone Air Node Name
|
|
PatRoom3_Mult10_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom4_Flr_3, !- Zone Name
|
|
PatRoom4_Flr_3 Equipment,!- Zone Conditioning Equipment List Name
|
|
PatRoom4_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom4_Flr_3 Air Node, !- Zone Air Node Name
|
|
PatRoom4_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom4_Flr_4, !- Zone Name
|
|
PatRoom4_Flr_4 Equipment,!- Zone Conditioning Equipment List Name
|
|
PatRoom4_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom4_Flr_4 Air Node, !- Zone Air Node Name
|
|
PatRoom4_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom5_Mult10_Flr_3, !- Zone Name
|
|
PatRoom5_Mult10_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
PatRoom5_Mult10_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom5_Mult10_Flr_3 Air Node, !- Zone Air Node Name
|
|
PatRoom5_Mult10_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom5_Mult10_Flr_4, !- Zone Name
|
|
PatRoom5_Mult10_Flr_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
PatRoom5_Mult10_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom5_Mult10_Flr_4 Air Node, !- Zone Air Node Name
|
|
PatRoom5_Mult10_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom6_Flr_3, !- Zone Name
|
|
PatRoom6_Flr_3 Equipment,!- Zone Conditioning Equipment List Name
|
|
PatRoom6_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom6_Flr_3 Air Node, !- Zone Air Node Name
|
|
PatRoom6_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom6_Flr_4, !- Zone Name
|
|
PatRoom6_Flr_4 Equipment,!- Zone Conditioning Equipment List Name
|
|
PatRoom6_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom6_Flr_4 Air Node, !- Zone Air Node Name
|
|
PatRoom6_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom7_Mult10_Flr_3, !- Zone Name
|
|
PatRoom7_Mult10_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
PatRoom7_Mult10_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom7_Mult10_Flr_3 Air Node, !- Zone Air Node Name
|
|
PatRoom7_Mult10_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom7_Mult10_Flr_4, !- Zone Name
|
|
PatRoom7_Mult10_Flr_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
PatRoom7_Mult10_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom7_Mult10_Flr_4 Air Node, !- Zone Air Node Name
|
|
PatRoom7_Mult10_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom8_Flr_3, !- Zone Name
|
|
PatRoom8_Flr_3 Equipment,!- Zone Conditioning Equipment List Name
|
|
PatRoom8_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom8_Flr_3 Air Node, !- Zone Air Node Name
|
|
PatRoom8_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PatRoom8_Flr_4, !- Zone Name
|
|
PatRoom8_Flr_4 Equipment,!- Zone Conditioning Equipment List Name
|
|
PatRoom8_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PatRoom8_Flr_4 Air Node, !- Zone Air Node Name
|
|
PatRoom8_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
PhysTherapy_Flr_3, !- Zone Name
|
|
PhysTherapy_Flr_3 Equipment, !- Zone Conditioning Equipment List Name
|
|
PhysTherapy_Flr_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
PhysTherapy_Flr_3 Air Node, !- Zone Air Node Name
|
|
PhysTherapy_Flr_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Radiology_Flr_4, !- Zone Name
|
|
Radiology_Flr_4 Equipment, !- Zone Conditioning Equipment List Name
|
|
Radiology_Flr_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Radiology_Flr_4 Air Node,!- Zone Air Node Name
|
|
Radiology_Flr_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Basement VAV Box, !- Name
|
|
Basement VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Basement VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Corridor_Flr_1 VAV Box, !- Name
|
|
Corridor_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Corridor_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Corridor_Flr_2 VAV Box, !- Name
|
|
Corridor_Flr_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Corridor_Flr_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Corridor_Flr_5 VAV Box, !- Name
|
|
Corridor_Flr_5 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Corridor_Flr_5 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Corridor_NW_Flr_3 VAV Box, !- Name
|
|
Corridor_NW_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Corridor_NW_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Corridor_NW_Flr_4 VAV Box, !- Name
|
|
Corridor_NW_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Corridor_NW_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Corridor_SE_Flr_3 VAV Box, !- Name
|
|
Corridor_SE_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Corridor_SE_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Corridor_SE_Flr_4 VAV Box, !- Name
|
|
Corridor_SE_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Corridor_SE_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Dining_Flr_5 VAV Box, !- Name
|
|
Dining_Flr_5 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Dining_Flr_5 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
ER_Exam1_Mult4_Flr_1 VAV Box, !- Name
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
ER_Exam3_Mult4_Flr_1 VAV Box, !- Name
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box, !- Name
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
ER_Trauma1_Flr_1 VAV Box,!- Name
|
|
ER_Trauma1_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
ER_Trauma1_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
ER_Trauma2_Flr_1 VAV Box,!- Name
|
|
ER_Trauma2_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
ER_Trauma2_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
ER_Triage_Mult4_Flr_1 VAV Box, !- Name
|
|
ER_Triage_Mult4_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
ER_Triage_Mult4_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
ICU_Flr_2 VAV Box, !- Name
|
|
ICU_Flr_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
ICU_Flr_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box, !- Name
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box, !- Name
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
IC_PatRoom2_Flr_2 VAV Box, !- Name
|
|
IC_PatRoom2_Flr_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
IC_PatRoom2_Flr_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box, !- Name
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Kitchen_Flr_5 VAV Box, !- Name
|
|
Kitchen_Flr_5 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Kitchen_Flr_5 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Lab_Flr_3 VAV Box, !- Name
|
|
Lab_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Lab_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Lab_Flr_4 VAV Box, !- Name
|
|
Lab_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Lab_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Lobby_Records_Flr_1 VAV Box, !- Name
|
|
Lobby_Records_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Lobby_Records_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
NurseStn_Lobby_Flr_3 VAV Box, !- Name
|
|
NurseStn_Lobby_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
NurseStn_Lobby_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
NurseStn_Lobby_Flr_4 VAV Box, !- Name
|
|
NurseStn_Lobby_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
NurseStn_Lobby_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
NurseStn_Lobby_Flr_5 VAV Box, !- Name
|
|
NurseStn_Lobby_Flr_5 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
NurseStn_Lobby_Flr_5 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
OR1_Flr_2 VAV Box, !- Name
|
|
OR1_Flr_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
OR1_Flr_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
OR2_Mult5_Flr_2 VAV Box, !- Name
|
|
OR2_Mult5_Flr_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
OR2_Mult5_Flr_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
OR3_Flr_2 VAV Box, !- Name
|
|
OR3_Flr_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
OR3_Flr_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
OR4_Flr_2 VAV Box, !- Name
|
|
OR4_Flr_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
OR4_Flr_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box, !- Name
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Office1_Flr_5 VAV Box, !- Name
|
|
Office1_Flr_5 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Office1_Flr_5 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Office1_Mult4_Flr_1 VAV Box, !- Name
|
|
Office1_Mult4_Flr_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Office1_Mult4_Flr_1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Office2_Mult5_Flr_5 VAV Box, !- Name
|
|
Office2_Mult5_Flr_5 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Office2_Mult5_Flr_5 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Office3_Flr_5 VAV Box, !- Name
|
|
Office3_Flr_5 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Office3_Flr_5 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Office4_Mult6_Flr_5 VAV Box, !- Name
|
|
Office4_Mult6_Flr_5 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Office4_Mult6_Flr_5 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom1_Mult10_Flr_3 VAV Box, !- Name
|
|
PatRoom1_Mult10_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom1_Mult10_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom1_Mult10_Flr_4 VAV Box, !- Name
|
|
PatRoom1_Mult10_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom1_Mult10_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom2_Flr_3 VAV Box, !- Name
|
|
PatRoom2_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom2_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom2_Flr_4 VAV Box, !- Name
|
|
PatRoom2_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom2_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom3_Mult10_Flr_3 VAV Box, !- Name
|
|
PatRoom3_Mult10_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom3_Mult10_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom3_Mult10_Flr_4 VAV Box, !- Name
|
|
PatRoom3_Mult10_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom3_Mult10_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom4_Flr_3 VAV Box, !- Name
|
|
PatRoom4_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom4_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom4_Flr_4 VAV Box, !- Name
|
|
PatRoom4_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom4_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom5_Mult10_Flr_3 VAV Box, !- Name
|
|
PatRoom5_Mult10_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom5_Mult10_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom5_Mult10_Flr_4 VAV Box, !- Name
|
|
PatRoom5_Mult10_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom5_Mult10_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom6_Flr_3 VAV Box, !- Name
|
|
PatRoom6_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom6_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom6_Flr_4 VAV Box, !- Name
|
|
PatRoom6_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom6_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom7_Mult10_Flr_3 VAV Box, !- Name
|
|
PatRoom7_Mult10_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom7_Mult10_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom7_Mult10_Flr_4 VAV Box, !- Name
|
|
PatRoom7_Mult10_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom7_Mult10_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom8_Flr_3 VAV Box, !- Name
|
|
PatRoom8_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom8_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PatRoom8_Flr_4 VAV Box, !- Name
|
|
PatRoom8_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PatRoom8_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
PhysTherapy_Flr_3 VAV Box, !- Name
|
|
PhysTherapy_Flr_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
PhysTherapy_Flr_3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Radiology_Flr_4 VAV Box, !- Name
|
|
Radiology_Flr_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Radiology_Flr_4 VAV Box Component; !- Air Terminal Name
|
|
|
|
NodeList,
|
|
Basement Inlet Nodes, !- Name
|
|
Basement VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
CAV_1_OANode List, !- Name
|
|
CAV_1_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
CAV_2_OANode List, !- Name
|
|
CAV_2_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Corridor_Flr_1 Inlet Nodes, !- Name
|
|
Corridor_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Corridor_Flr_2 Inlet Nodes, !- Name
|
|
Corridor_Flr_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Corridor_Flr_5 Inlet Nodes, !- Name
|
|
Corridor_Flr_5 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Corridor_NW_Flr_3 Inlet Nodes, !- Name
|
|
Corridor_NW_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Corridor_NW_Flr_4 Inlet Nodes, !- Name
|
|
Corridor_NW_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Corridor_SE_Flr_3 Inlet Nodes, !- Name
|
|
Corridor_SE_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Corridor_SE_Flr_4 Inlet Nodes, !- Name
|
|
Corridor_SE_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Dining_Flr_5 Exhaust Nodes, !- Name
|
|
Dining_Flr_5 Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Dining_Flr_5 Inlet Nodes,!- Name
|
|
Dining_Flr_5 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
ER_Exam1_Mult4_Flr_1 Inlet Nodes, !- Name
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
ER_Exam3_Mult4_Flr_1 Inlet Nodes, !- Name
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
ER_NurseStn_Lobby_Flr_1 Inlet Nodes, !- Name
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
ER_Trauma1_Flr_1 Inlet Nodes, !- Name
|
|
ER_Trauma1_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
ER_Trauma2_Flr_1 Inlet Nodes, !- Name
|
|
ER_Trauma2_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
ER_Triage_Mult4_Flr_1 Inlet Nodes, !- Name
|
|
ER_Triage_Mult4_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
ICU_Flr_2 Inlet Nodes, !- Name
|
|
ICU_Flr_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
ICU_NurseStn_Lobby_Flr_2 Inlet Nodes, !- Name
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
IC_PatRoom1_Mult5_Flr_2 Inlet Nodes, !- Name
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
IC_PatRoom2_Flr_2 Inlet Nodes, !- Name
|
|
IC_PatRoom2_Flr_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
IC_PatRoom3_Mult6_Flr_2 Inlet Nodes, !- Name
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Kitchen_Flr_5 Exhaust Nodes, !- Name
|
|
Kitchen_Flr_5 Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Kitchen_Flr_5 Inlet Nodes, !- Name
|
|
Kitchen_Flr_5 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Lab_Flr_3 Inlet Nodes, !- Name
|
|
Lab_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Lab_Flr_4 Inlet Nodes, !- Name
|
|
Lab_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Lobby_Records_Flr_1 Inlet Nodes, !- Name
|
|
Lobby_Records_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
NurseStn_Lobby_Flr_3 Inlet Nodes, !- Name
|
|
NurseStn_Lobby_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
NurseStn_Lobby_Flr_4 Inlet Nodes, !- Name
|
|
NurseStn_Lobby_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
NurseStn_Lobby_Flr_5 Inlet Nodes, !- Name
|
|
NurseStn_Lobby_Flr_5 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
OR1_Flr_2 Inlet Nodes, !- Name
|
|
OR1_Flr_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
OR2_Mult5_Flr_2 Inlet Nodes, !- Name
|
|
OR2_Mult5_Flr_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
OR3_Flr_2 Inlet Nodes, !- Name
|
|
OR3_Flr_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
OR4_Flr_2 Inlet Nodes, !- Name
|
|
OR4_Flr_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
OR_NurseStn_Lobby_Flr_2 Inlet Nodes, !- Name
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Office1_Flr_5 Inlet Nodes, !- Name
|
|
Office1_Flr_5 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Office1_Mult4_Flr_1 Inlet Nodes, !- Name
|
|
Office1_Mult4_Flr_1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Office2_Mult5_Flr_5 Inlet Nodes, !- Name
|
|
Office2_Mult5_Flr_5 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Office3_Flr_5 Inlet Nodes, !- Name
|
|
Office3_Flr_5 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Office4_Mult6_Flr_5 Inlet Nodes, !- Name
|
|
Office4_Mult6_Flr_5 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom1_Mult10_Flr_3 Inlet Nodes, !- Name
|
|
PatRoom1_Mult10_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom1_Mult10_Flr_4 Inlet Nodes, !- Name
|
|
PatRoom1_Mult10_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom2_Flr_3 Inlet Nodes, !- Name
|
|
PatRoom2_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom2_Flr_4 Inlet Nodes, !- Name
|
|
PatRoom2_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom3_Mult10_Flr_3 Inlet Nodes, !- Name
|
|
PatRoom3_Mult10_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom3_Mult10_Flr_4 Inlet Nodes, !- Name
|
|
PatRoom3_Mult10_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom4_Flr_3 Inlet Nodes, !- Name
|
|
PatRoom4_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom4_Flr_4 Inlet Nodes, !- Name
|
|
PatRoom4_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom5_Mult10_Flr_3 Inlet Nodes, !- Name
|
|
PatRoom5_Mult10_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom5_Mult10_Flr_4 Inlet Nodes, !- Name
|
|
PatRoom5_Mult10_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom6_Flr_3 Inlet Nodes, !- Name
|
|
PatRoom6_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom6_Flr_4 Inlet Nodes, !- Name
|
|
PatRoom6_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom7_Mult10_Flr_3 Inlet Nodes, !- Name
|
|
PatRoom7_Mult10_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom7_Mult10_Flr_4 Inlet Nodes, !- Name
|
|
PatRoom7_Mult10_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom8_Flr_3 Inlet Nodes, !- Name
|
|
PatRoom8_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PatRoom8_Flr_4 Inlet Nodes, !- Name
|
|
PatRoom8_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
PhysTherapy_Flr_3 Inlet Nodes, !- Name
|
|
PhysTherapy_Flr_3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Radiology_Flr_4 Inlet Nodes, !- Name
|
|
Radiology_Flr_4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
VAV_1_OANode List, !- Name
|
|
VAV_1_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
VAV_2_OANode List, !- Name
|
|
VAV_2_OAInlet Node; !- Node 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
CAV_1 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
CAV_1 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
CAV_2 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
CAV_2 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
VAV_1 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
VAV_1 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
VAV_2 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
VAV_2 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManager:NightCycle,
|
|
CAV_1 Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
CAV_2 Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
VAV_1 Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
VAV_2 Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
HVACOperationSchd, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
SetpointManager:Scheduled,
|
|
CAV_1 SAT setpoint, !- Name
|
|
Temperature, !- Control Variable
|
|
CAV_SAT_SCH, !- Schedule Name
|
|
CAV_1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:Scheduled,
|
|
CAV_2 SAT setpoint, !- Name
|
|
Temperature, !- Control Variable
|
|
CAV_SAT_SCH, !- Schedule Name
|
|
CAV_2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:Scheduled,
|
|
VAV_1 SAT setpoint, !- Name
|
|
Temperature, !- Control Variable
|
|
Seasonal-Reset-Supply-Air-Temp-Sch, !- Schedule Name
|
|
VAV_1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:Scheduled,
|
|
VAV_2 SAT setpoint, !- Name
|
|
Temperature, !- Control Variable
|
|
Seasonal-Reset-Supply-Air-Temp-Sch, !- Schedule Name
|
|
VAV_2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
BranchList,
|
|
CAV_1 Air Loop Branches, !- Name
|
|
CAV_1 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
CAV_2 Air Loop Branches, !- Name
|
|
CAV_2 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
VAV_1 Air Loop Branches, !- Name
|
|
VAV_1 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
VAV_2 Air Loop Branches, !- Name
|
|
VAV_2 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
Branch,
|
|
CAV_1 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
CAV_1_OA, !- Component 1 Name
|
|
CAV_1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
CAV_1_OA-CAV_1 HumidifierNode, !- Component 1 Outlet Node Name
|
|
Humidifier:Steam:Electric, !- Component 2 Object Type
|
|
CAV_1 Humidifier, !- Component 2 Name
|
|
CAV_1_OA-CAV_1 HumidifierNode, !- Component 2 Inlet Node Name
|
|
CAV_1 Humidifier-CAV_1_CoolCNode, !- Component 2 Outlet Node Name
|
|
Coil:Cooling:Water:DetailedGeometry, !- Component 3 Object Type
|
|
CAV_1_CoolC, !- Component 3 Name
|
|
CAV_1 Humidifier-CAV_1_CoolCNode, !- Component 3 Inlet Node Name
|
|
CAV_1_CoolC-CAV_1_HeatCNode, !- Component 3 Outlet Node Name
|
|
Coil:Heating:Water, !- Component 4 Object Type
|
|
CAV_1_HeatC, !- Component 4 Name
|
|
CAV_1_CoolC-CAV_1_HeatCNode, !- Component 4 Inlet Node Name
|
|
CAV_1_HeatC-CAV_1_FanNode, !- Component 4 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 5 Object Type
|
|
CAV_1_Fan, !- Component 5 Name
|
|
CAV_1_HeatC-CAV_1_FanNode, !- Component 5 Inlet Node Name
|
|
CAV_1 Supply Equipment Outlet Node; !- Component 5 Outlet Node Name
|
|
|
|
Branch,
|
|
CAV_2 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
CAV_2_OA, !- Component 1 Name
|
|
CAV_2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
CAV_2_OA-CAV_2 HumidifierNode, !- Component 1 Outlet Node Name
|
|
Humidifier:Steam:Electric, !- Component 2 Object Type
|
|
CAV_2 Humidifier, !- Component 2 Name
|
|
CAV_2_OA-CAV_2 HumidifierNode, !- Component 2 Inlet Node Name
|
|
CAV_2 Humidifier-CAV_2_CoolCNode, !- Component 2 Outlet Node Name
|
|
Coil:Cooling:Water:DetailedGeometry, !- Component 3 Object Type
|
|
CAV_2_CoolC, !- Component 3 Name
|
|
CAV_2 Humidifier-CAV_2_CoolCNode, !- Component 3 Inlet Node Name
|
|
CAV_2_CoolC-CAV_2_HeatCNode, !- Component 3 Outlet Node Name
|
|
Coil:Heating:Water, !- Component 4 Object Type
|
|
CAV_2_HeatC, !- Component 4 Name
|
|
CAV_2_CoolC-CAV_2_HeatCNode, !- Component 4 Inlet Node Name
|
|
CAV_2_HeatC-CAV_2_FanNode, !- Component 4 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 5 Object Type
|
|
CAV_2_Fan, !- Component 5 Name
|
|
CAV_2_HeatC-CAV_2_FanNode, !- Component 5 Inlet Node Name
|
|
CAV_2 Supply Equipment Outlet Node; !- Component 5 Outlet Node Name
|
|
|
|
Branch,
|
|
VAV_1 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
VAV_1_OA, !- Component 1 Name
|
|
VAV_1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_1_OA-VAV_1_CoolCNode,!- Component 1 Outlet Node Name
|
|
Coil:Cooling:Water:DetailedGeometry, !- Component 2 Object Type
|
|
VAV_1_CoolC, !- Component 2 Name
|
|
VAV_1_OA-VAV_1_CoolCNode,!- Component 2 Inlet Node Name
|
|
VAV_1_CoolC-VAV_1_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Water, !- Component 3 Object Type
|
|
VAV_1_HeatC, !- Component 3 Name
|
|
VAV_1_CoolC-VAV_1_HeatCNode, !- Component 3 Inlet Node Name
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Component 3 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 4 Object Type
|
|
VAV_1_Fan, !- Component 4 Name
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Component 4 Inlet Node Name
|
|
VAV_1 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name
|
|
|
|
Branch,
|
|
VAV_2 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
VAV_2_OA, !- Component 1 Name
|
|
VAV_2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_2_OA-VAV_2_CoolCNode,!- Component 1 Outlet Node Name
|
|
Coil:Cooling:Water:DetailedGeometry, !- Component 2 Object Type
|
|
VAV_2_CoolC, !- Component 2 Name
|
|
VAV_2_OA-VAV_2_CoolCNode,!- Component 2 Inlet Node Name
|
|
VAV_2_CoolC-VAV_2_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Water, !- Component 3 Object Type
|
|
VAV_2_HeatC, !- Component 3 Name
|
|
VAV_2_CoolC-VAV_2_HeatCNode, !- Component 3 Inlet Node Name
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Component 3 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 4 Object Type
|
|
VAV_2_Fan, !- Component 4 Name
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Component 4 Inlet Node Name
|
|
VAV_2 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
CAV_1_Controllers, !- Name
|
|
Controller:WaterCoil, !- Controller 1 Object Type
|
|
CAV_1_CoolC_Controller, !- Controller 1 Name
|
|
Controller:WaterCoil, !- Controller 2 Object Type
|
|
CAV_1_HeatC_Controller; !- Controller 2 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
CAV_1_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
CAV_1_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
CAV_2_Controllers, !- Name
|
|
Controller:WaterCoil, !- Controller 1 Object Type
|
|
CAV_2_CoolC_Controller, !- Controller 1 Name
|
|
Controller:WaterCoil, !- Controller 2 Object Type
|
|
CAV_2_HeatC_Controller; !- Controller 2 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
CAV_2_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
CAV_2_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV_1_Controllers, !- Name
|
|
Controller:WaterCoil, !- Controller 1 Object Type
|
|
VAV_1_CoolC_Controller, !- Controller 1 Name
|
|
Controller:WaterCoil, !- Controller 2 Object Type
|
|
VAV_1_HeatC_Controller; !- Controller 2 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV_1_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
VAV_1_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV_2_Controllers, !- Name
|
|
Controller:WaterCoil, !- Controller 1 Object Type
|
|
VAV_2_CoolC_Controller, !- Controller 1 Name
|
|
Controller:WaterCoil, !- Controller 2 Object Type
|
|
VAV_2_HeatC_Controller; !- Controller 2 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
VAV_2_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
VAV_2_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
CAV_1_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
CAV_1_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
CAV_2_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
CAV_2_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
VAV_1_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
VAV_1_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
VAV_2_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
VAV_2_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
CAV_1_OA, !- Name
|
|
CAV_1_OA_Controllers, !- Controller List Name
|
|
CAV_1_OA_Equipment; !- Outdoor Air Equipment List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
CAV_2_OA, !- Name
|
|
CAV_2_OA_Controllers, !- Controller List Name
|
|
CAV_2_OA_Equipment; !- Outdoor Air Equipment List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
VAV_1_OA, !- Name
|
|
VAV_1_OA_Controllers, !- Controller List Name
|
|
VAV_1_OA_Equipment; !- Outdoor Air Equipment List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
VAV_2_OA, !- Name
|
|
VAV_2_OA_Controllers, !- Controller List Name
|
|
VAV_2_OA_Equipment; !- Outdoor Air Equipment List Name
|
|
|
|
OutdoorAir:NodeList,
|
|
CAV_1_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
CAV_2_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
VAV_1_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
VAV_2_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:Mixer,
|
|
CAV_1_OAMixing Box, !- Name
|
|
CAV_1_OA-CAV_1 HumidifierNode, !- Mixed Air Node Name
|
|
CAV_1_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
CAV_1_OARelief Node, !- Relief Air Stream Node Name
|
|
CAV_1 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
CAV_2_OAMixing Box, !- Name
|
|
CAV_2_OA-CAV_2 HumidifierNode, !- Mixed Air Node Name
|
|
CAV_2_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
CAV_2_OARelief Node, !- Relief Air Stream Node Name
|
|
CAV_2 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
VAV_1_OAMixing Box, !- Name
|
|
VAV_1_OA-VAV_1_CoolCNode,!- Mixed Air Node Name
|
|
VAV_1_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
VAV_1_OARelief Node, !- Relief Air Stream Node Name
|
|
VAV_1 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
VAV_2_OAMixing Box, !- Name
|
|
VAV_2_OA-VAV_2_CoolCNode,!- Mixed Air Node Name
|
|
VAV_2_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
VAV_2_OARelief Node, !- Relief Air Stream Node Name
|
|
VAV_2 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
SetpointManager:MixedAir,
|
|
CAV_1_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
CAV_1_HeatC-CAV_1_FanNode, !- Fan Inlet Node Name
|
|
CAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
CAV_1_CoolC-CAV_1_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
CAV_1_HeatC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
CAV_1_HeatC-CAV_1_FanNode, !- Fan Inlet Node Name
|
|
CAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
CAV_1_HeatC-CAV_1_FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
CAV_1_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
CAV_1_HeatC-CAV_1_FanNode, !- Fan Inlet Node Name
|
|
CAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
CAV_1_OA-CAV_1 HumidifierNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
CAV_2_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
CAV_2_HeatC-CAV_2_FanNode, !- Fan Inlet Node Name
|
|
CAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
CAV_2_CoolC-CAV_2_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
CAV_2_HeatC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
CAV_2_HeatC-CAV_2_FanNode, !- Fan Inlet Node Name
|
|
CAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
CAV_2_HeatC-CAV_2_FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
CAV_2_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
CAV_2_HeatC-CAV_2_FanNode, !- Fan Inlet Node Name
|
|
CAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
CAV_2_OA-CAV_2 HumidifierNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_1_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Fan Inlet Node Name
|
|
VAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_1_CoolC-VAV_1_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_1_HeatC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Fan Inlet Node Name
|
|
VAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_1_HeatC-VAV_1_FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_1_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_1_HeatC-VAV_1_FanNode, !- Fan Inlet Node Name
|
|
VAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_1_OA-VAV_1_CoolCNode;!- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_2_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Fan Inlet Node Name
|
|
VAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_2_CoolC-VAV_2_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_2_HeatC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Fan Inlet Node Name
|
|
VAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_2_HeatC-VAV_2_FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
VAV_2_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
VAV_2_HeatC-VAV_2_FanNode, !- Fan Inlet Node Name
|
|
VAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
VAV_2_OA-VAV_2_CoolCNode;!- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:SingleZone:Humidity:Minimum,
|
|
CAV_1 Humidifier HUMRAT setpoint, !- Name
|
|
CAV_1 Humidifier-CAV_1_CoolCNode, !- Setpoint Node or NodeList Name
|
|
ER_EXAM3_MULT4_FLR_1 Air Node; !- Control Zone Air Node Name
|
|
|
|
SetpointManager:SingleZone:Humidity:Minimum,
|
|
CAV_2 Humidifier HUMRAT setpoint, !- Name
|
|
CAV_2 Humidifier-CAV_2_CoolCNode, !- Setpoint Node or NodeList Name
|
|
OR2_MULT5_FLR_2 Air Node;!- Control Zone Air Node Name
|
|
|
|
SetpointManager:SingleZone:Humidity:Maximum,
|
|
CAV_1_CoolC HUMRAT setpoint, !- Name
|
|
CAV_1_CoolC-CAV_1_HeatCNode, !- Setpoint Node or NodeList Name
|
|
ER_EXAM3_MULT4_FLR_1 Air Node; !- Control Zone Air Node Name
|
|
|
|
SetpointManager:SingleZone:Humidity:Maximum,
|
|
CAV_2_CoolC HUMRAT setpoint, !- Name
|
|
CAV_2_CoolC-CAV_2_HeatCNode, !- Setpoint Node or NodeList Name
|
|
OR2_MULT5_FLR_2 Air Node;!- Control Zone Air Node Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
CAV_1, !- Name
|
|
CAV_1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
CAV_1 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
CAV_2, !- Name
|
|
CAV_2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
CAV_2 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
VAV_1, !- Name
|
|
VAV_1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
VAV_1 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
VAV_2, !- Name
|
|
VAV_2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
VAV_2 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
CAV_1 Supply Air Splitter, !- Name
|
|
CAV_1 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Inlet Node Name, !- Outlet 1 Node Name
|
|
ER_Trauma1_Flr_1 VAV Box Inlet Node Name, !- Outlet 2 Node Name
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Inlet Node Name, !- Outlet 3 Node Name
|
|
ER_Trauma2_Flr_1 VAV Box Inlet Node Name, !- Outlet 4 Node Name
|
|
ER_Triage_Mult4_Flr_1 VAV Box Inlet Node Name, !- Outlet 5 Node Name
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Inlet Node Name, !- Outlet 6 Node Name
|
|
PatRoom1_Mult10_Flr_3 VAV Box Inlet Node Name, !- Outlet 7 Node Name
|
|
PatRoom5_Mult10_Flr_3 VAV Box Inlet Node Name, !- Outlet 8 Node Name
|
|
PatRoom7_Mult10_Flr_3 VAV Box Inlet Node Name, !- Outlet 9 Node Name
|
|
PatRoom3_Mult10_Flr_4 VAV Box Inlet Node Name, !- Outlet 10 Node Name
|
|
PatRoom5_Mult10_Flr_4 VAV Box Inlet Node Name, !- Outlet 11 Node Name
|
|
PatRoom6_Flr_4 VAV Box Inlet Node Name, !- Outlet 12 Node Name
|
|
PatRoom7_Mult10_Flr_4 VAV Box Inlet Node Name; !- Outlet 13 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
CAV_2 Supply Air Splitter, !- Name
|
|
CAV_2 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
OR1_Flr_2 VAV Box Inlet Node Name, !- Outlet 1 Node Name
|
|
OR2_Mult5_Flr_2 VAV Box Inlet Node Name, !- Outlet 2 Node Name
|
|
OR3_Flr_2 VAV Box Inlet Node Name, !- Outlet 3 Node Name
|
|
OR4_Flr_2 VAV Box Inlet Node Name, !- Outlet 4 Node Name
|
|
IC_PatRoom2_Flr_2 VAV Box Inlet Node Name, !- Outlet 5 Node Name
|
|
PatRoom2_Flr_3 VAV Box Inlet Node Name, !- Outlet 6 Node Name
|
|
PatRoom6_Flr_3 VAV Box Inlet Node Name, !- Outlet 7 Node Name
|
|
PatRoom8_Flr_3 VAV Box Inlet Node Name, !- Outlet 8 Node Name
|
|
PatRoom4_Flr_4 VAV Box Inlet Node Name; !- Outlet 9 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
VAV_1 Supply Air Splitter, !- Name
|
|
VAV_1 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Basement VAV Box Inlet Node Name, !- Outlet 1 Node Name
|
|
Office1_Mult4_Flr_1 VAV Box Inlet Node Name, !- Outlet 2 Node Name
|
|
Lobby_Records_Flr_1 VAV Box Inlet Node Name, !- Outlet 3 Node Name
|
|
Corridor_Flr_1 VAV Box Inlet Node Name, !- Outlet 4 Node Name
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Inlet Node Name, !- Outlet 5 Node Name
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Inlet Node Name, !- Outlet 6 Node Name
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Inlet Node Name, !- Outlet 7 Node Name
|
|
Corridor_Flr_2 VAV Box Inlet Node Name, !- Outlet 8 Node Name
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Inlet Node Name, !- Outlet 9 Node Name
|
|
PatRoom3_Mult10_Flr_3 VAV Box Inlet Node Name, !- Outlet 10 Node Name
|
|
Lab_Flr_3 VAV Box Inlet Node Name, !- Outlet 11 Node Name
|
|
PatRoom1_Mult10_Flr_4 VAV Box Inlet Node Name, !- Outlet 12 Node Name
|
|
PatRoom8_Flr_4 VAV Box Inlet Node Name; !- Outlet 13 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
VAV_2 Supply Air Splitter, !- Name
|
|
VAV_2 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
ICU_Flr_2 VAV Box Inlet Node Name, !- Outlet 1 Node Name
|
|
PatRoom4_Flr_3 VAV Box Inlet Node Name, !- Outlet 2 Node Name
|
|
PhysTherapy_Flr_3 VAV Box Inlet Node Name, !- Outlet 3 Node Name
|
|
NurseStn_Lobby_Flr_3 VAV Box Inlet Node Name, !- Outlet 4 Node Name
|
|
Corridor_SE_Flr_3 VAV Box Inlet Node Name, !- Outlet 5 Node Name
|
|
Corridor_NW_Flr_3 VAV Box Inlet Node Name, !- Outlet 6 Node Name
|
|
PatRoom2_Flr_4 VAV Box Inlet Node Name, !- Outlet 7 Node Name
|
|
Radiology_Flr_4 VAV Box Inlet Node Name, !- Outlet 8 Node Name
|
|
NurseStn_Lobby_Flr_4 VAV Box Inlet Node Name, !- Outlet 9 Node Name
|
|
Lab_Flr_4 VAV Box Inlet Node Name, !- Outlet 10 Node Name
|
|
Corridor_SE_Flr_4 VAV Box Inlet Node Name, !- Outlet 11 Node Name
|
|
Corridor_NW_Flr_4 VAV Box Inlet Node Name, !- Outlet 12 Node Name
|
|
Dining_Flr_5 VAV Box Inlet Node Name, !- Outlet 13 Node Name
|
|
NurseStn_Lobby_Flr_5 VAV Box Inlet Node Name, !- Outlet 14 Node Name
|
|
Kitchen_Flr_5 VAV Box Inlet Node Name, !- Outlet 15 Node Name
|
|
Office1_Flr_5 VAV Box Inlet Node Name, !- Outlet 16 Node Name
|
|
Office2_Mult5_Flr_5 VAV Box Inlet Node Name, !- Outlet 17 Node Name
|
|
Office3_Flr_5 VAV Box Inlet Node Name, !- Outlet 18 Node Name
|
|
Office4_Mult6_Flr_5 VAV Box Inlet Node Name, !- Outlet 19 Node Name
|
|
Corridor_Flr_5 VAV Box Inlet Node Name; !- Outlet 20 Node Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
CAV_1 Return Air Path, !- Name
|
|
CAV_1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
CAV_1 Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
CAV_2 Return Air Path, !- Name
|
|
CAV_2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
CAV_2 Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
VAV_1 Return Air Path, !- Name
|
|
VAV_1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
VAV_1 Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
VAV_2 Return Air Path, !- Name
|
|
VAV_2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
VAV_2 Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
CAV_1 Return Air Mixer, !- Name
|
|
CAV_1 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
ER_Exam1_Mult4_Flr_1 Return Air Node Name, !- Inlet 1 Node Name
|
|
ER_Trauma1_Flr_1 Return Air Node Name, !- Inlet 2 Node Name
|
|
ER_Exam3_Mult4_Flr_1 Return Air Node Name, !- Inlet 3 Node Name
|
|
ER_Trauma2_Flr_1 Return Air Node Name, !- Inlet 4 Node Name
|
|
ER_Triage_Mult4_Flr_1 Return Air Node Name, !- Inlet 5 Node Name
|
|
IC_PatRoom1_Mult5_Flr_2 Return Air Node Name, !- Inlet 6 Node Name
|
|
PatRoom1_Mult10_Flr_3 Return Air Node Name, !- Inlet 7 Node Name
|
|
PatRoom5_Mult10_Flr_3 Return Air Node Name, !- Inlet 8 Node Name
|
|
PatRoom7_Mult10_Flr_3 Return Air Node Name, !- Inlet 9 Node Name
|
|
PatRoom3_Mult10_Flr_4 Return Air Node Name, !- Inlet 10 Node Name
|
|
PatRoom5_Mult10_Flr_4 Return Air Node Name, !- Inlet 11 Node Name
|
|
PatRoom6_Flr_4 Return Air Node Name, !- Inlet 12 Node Name
|
|
PatRoom7_Mult10_Flr_4 Return Air Node Name; !- Inlet 13 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
CAV_2 Return Air Mixer, !- Name
|
|
CAV_2 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
OR1_Flr_2 Return Air Node Name, !- Inlet 1 Node Name
|
|
OR2_Mult5_Flr_2 Return Air Node Name, !- Inlet 2 Node Name
|
|
OR3_Flr_2 Return Air Node Name, !- Inlet 3 Node Name
|
|
OR4_Flr_2 Return Air Node Name, !- Inlet 4 Node Name
|
|
IC_PatRoom2_Flr_2 Return Air Node Name, !- Inlet 5 Node Name
|
|
PatRoom2_Flr_3 Return Air Node Name, !- Inlet 6 Node Name
|
|
PatRoom6_Flr_3 Return Air Node Name, !- Inlet 7 Node Name
|
|
PatRoom8_Flr_3 Return Air Node Name, !- Inlet 8 Node Name
|
|
PatRoom4_Flr_4 Return Air Node Name; !- Inlet 9 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
VAV_1 Return Air Mixer, !- Name
|
|
VAV_1 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
Basement Return Air Node Name, !- Inlet 1 Node Name
|
|
Office1_Mult4_Flr_1 Return Air Node Name, !- Inlet 2 Node Name
|
|
Lobby_Records_Flr_1 Return Air Node Name, !- Inlet 3 Node Name
|
|
Corridor_Flr_1 Return Air Node Name, !- Inlet 4 Node Name
|
|
ER_NurseStn_Lobby_Flr_1 Return Air Node Name, !- Inlet 5 Node Name
|
|
IC_PatRoom3_Mult6_Flr_2 Return Air Node Name, !- Inlet 6 Node Name
|
|
ICU_NurseStn_Lobby_Flr_2 Return Air Node Name, !- Inlet 7 Node Name
|
|
Corridor_Flr_2 Return Air Node Name, !- Inlet 8 Node Name
|
|
OR_NurseStn_Lobby_Flr_2 Return Air Node Name, !- Inlet 9 Node Name
|
|
PatRoom3_Mult10_Flr_3 Return Air Node Name, !- Inlet 10 Node Name
|
|
Lab_Flr_3 Return Air Node Name, !- Inlet 11 Node Name
|
|
PatRoom1_Mult10_Flr_4 Return Air Node Name, !- Inlet 12 Node Name
|
|
PatRoom8_Flr_4 Return Air Node Name; !- Inlet 13 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
VAV_2 Return Air Mixer, !- Name
|
|
VAV_2 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
ICU_Flr_2 Return Air Node Name, !- Inlet 1 Node Name
|
|
PatRoom4_Flr_3 Return Air Node Name, !- Inlet 2 Node Name
|
|
PhysTherapy_Flr_3 Return Air Node Name, !- Inlet 3 Node Name
|
|
NurseStn_Lobby_Flr_3 Return Air Node Name, !- Inlet 4 Node Name
|
|
Corridor_SE_Flr_3 Return Air Node Name, !- Inlet 5 Node Name
|
|
Corridor_NW_Flr_3 Return Air Node Name, !- Inlet 6 Node Name
|
|
PatRoom2_Flr_4 Return Air Node Name, !- Inlet 7 Node Name
|
|
Radiology_Flr_4 Return Air Node Name, !- Inlet 8 Node Name
|
|
NurseStn_Lobby_Flr_4 Return Air Node Name, !- Inlet 9 Node Name
|
|
Lab_Flr_4 Return Air Node Name, !- Inlet 10 Node Name
|
|
Corridor_SE_Flr_4 Return Air Node Name, !- Inlet 11 Node Name
|
|
Corridor_NW_Flr_4 Return Air Node Name, !- Inlet 12 Node Name
|
|
Dining_Flr_5 Return Air Node Name, !- Inlet 13 Node Name
|
|
NurseStn_Lobby_Flr_5 Return Air Node Name, !- Inlet 14 Node Name
|
|
Kitchen_Flr_5 Return Air Node Name, !- Inlet 15 Node Name
|
|
Office1_Flr_5 Return Air Node Name, !- Inlet 16 Node Name
|
|
Office2_Mult5_Flr_5 Return Air Node Name, !- Inlet 17 Node Name
|
|
Office3_Flr_5 Return Air Node Name, !- Inlet 18 Node Name
|
|
Office4_Mult6_Flr_5 Return Air Node Name, !- Inlet 19 Node Name
|
|
Corridor_Flr_5 Return Air Node Name; !- Inlet 20 Node Name
|
|
|
|
! ***SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
ADMIN_CLGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 05:00,25.0, !- Field 3
|
|
Until: 18:00,22.2, !- Field 5
|
|
Until: 24:00,25.0, !- Field 7
|
|
For: SummerDesignDay, !- Field 9
|
|
Until: 05:00,25.0, !- Field 10
|
|
Until: 18:00,22.2, !- Field 12
|
|
Until: 24:00,25.0, !- Field 14
|
|
For: WinterDesignDay, !- Field 16
|
|
Until: 07:00,25.0, !- Field 17
|
|
Until: 15:00,22.2, !- Field 19
|
|
Until: 24:00,25.0, !- Field 21
|
|
For: Saturdays, !- Field 23
|
|
Until: 07:00,25.0, !- Field 24
|
|
Until: 15:00,22.2, !- Field 26
|
|
Until: 24:00,25.0, !- Field 28
|
|
For: AllOtherDays, !- Field 30
|
|
Until: 24:00,25.0; !- Field 31
|
|
|
|
Schedule:Compact,
|
|
ADMIN_HTGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 05:00,18.3, !- Field 3
|
|
Until: 18:00,21.1, !- Field 5
|
|
Until: 24:00,18.3, !- Field 7
|
|
For: SummerDesignDay, !- Field 9
|
|
Until: 05:00,18.3, !- Field 10
|
|
Until: 18:00,21.1, !- Field 12
|
|
Until: 24:00,18.3, !- Field 14
|
|
For: WinterDesignDay, !- Field 16
|
|
Until: 07:00,18.3, !- Field 17
|
|
Until: 15:00,21.1, !- Field 19
|
|
Until: 24:00,18.3, !- Field 21
|
|
For: Saturdays, !- Field 23
|
|
Until: 07:00,18.3, !- Field 24
|
|
Until: 15:00,21.1, !- Field 26
|
|
Until: 24:00,18.3, !- Field 28
|
|
For: AllOtherDays, !- Field 30
|
|
Until: 24:00,18.3; !- Field 31
|
|
|
|
Schedule:Compact,
|
|
Kitchen_CLGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 05:00,30, !- Field 3
|
|
Until: 18:00,26, !- Field 5
|
|
Until: 24:00,30, !- Field 7
|
|
For: SummerDesignDay, !- Field 9
|
|
Until: 05:00,30, !- Field 10
|
|
Until: 18:00,26, !- Field 12
|
|
Until: 24:00,30, !- Field 14
|
|
For: WinterDesignDay, !- Field 16
|
|
Until: 07:00,30, !- Field 17
|
|
Until: 15:00,26, !- Field 19
|
|
Until: 24:00,30, !- Field 21
|
|
For: Saturdays, !- Field 23
|
|
Until: 07:00,30, !- Field 24
|
|
Until: 15:00,26, !- Field 26
|
|
Until: 24:00,30, !- Field 28
|
|
For: AllOtherDays, !- Field 30
|
|
Until: 24:00,30; !- Field 31
|
|
|
|
Schedule:Compact,
|
|
Kitchen_HTGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays, !- Field 2
|
|
Until: 05:00,15.6, !- Field 3
|
|
Until: 18:00,19, !- Field 5
|
|
Until: 24:00,15.6, !- Field 7
|
|
For: SummerDesignDay, !- Field 9
|
|
Until: 05:00,15.6, !- Field 10
|
|
Until: 18:00,19, !- Field 12
|
|
Until: 24:00,15.6, !- Field 14
|
|
For: WinterDesignDay, !- Field 16
|
|
Until: 07:00,15.6, !- Field 17
|
|
Until: 15:00,19, !- Field 19
|
|
Until: 24:00,15.6, !- Field 21
|
|
For: Saturdays, !- Field 23
|
|
Until: 07:00,15.6, !- Field 24
|
|
Until: 15:00,19, !- Field 26
|
|
Until: 24:00,15.6, !- Field 28
|
|
For: AllOtherDays, !- Field 30
|
|
Until: 24:00,15.6; !- Field 31
|
|
|
|
Schedule:Compact,
|
|
CRITICAL_CLGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,22.2; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CRITICAL_HTGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: ALLDays, !- Field 2
|
|
Until: 24:00,21.1; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
OR_CLGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 06:00,22.2, !- Field 3
|
|
Until: 17:00,18.3, !- Field 5
|
|
Until: 24:00,22.2; !- Field 7
|
|
|
|
Schedule:Compact,
|
|
OR_HTGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,18.3; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Dual Zone Control Type Sched, !- Name
|
|
Control Type, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,4; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
MaxRelHumSetSch, !- Name
|
|
Humidity, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
MinRelHumSetSch, !- Name
|
|
Humidity, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,40; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CAV_SAT_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,11.1; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Heating-Supply-Air-Temp-Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,16.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Seasonal-Reset-Supply-Air-Temp-Sch, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,11.1; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HVACOperationSchd, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CAV_OAminFracSchedule, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.33; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
VAV_OAminFracSchedule, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.25; !- Field 3
|
|
|
|
! ***EQUIPMENT***
|
|
|
|
Boiler:HotWater,
|
|
HeatSys1 Boiler, !- Name
|
|
NATURALGAS, !- Fuel Type
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
0.786, !- Nominal Thermal Efficiency
|
|
LeavingBoiler, !- Efficiency Curve Temperature Evaluation Variable
|
|
, !- Normalized Boiler Efficiency Curve Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Part Load Ratio
|
|
1.2, !- Maximum Part Load Ratio
|
|
1.0, !- Optimum Part Load Ratio
|
|
HeatSys1 Pump-HeatSys1 BoilerNode, !- Boiler Water Inlet Node Name
|
|
HeatSys1 Supply Equipment Outlet Node, !- Boiler Water Outlet Node Name
|
|
95.0, !- Water Outlet Upper Temperature Limit {C}
|
|
LeavingSetpointModulated,!- Boiler Flow Mode
|
|
0.0000, !- On Cycle Parasitic Electric Load {W}
|
|
1.0000; !- Sizing Factor
|
|
|
|
SetpointManager:Scheduled,
|
|
HeatSys1 Boiler Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
HW-Loop-Temp-Schedule, !- Schedule Name
|
|
HeatSys1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
Chiller:Electric:ReformulatedEIR,
|
|
CoolSys1 Chiller, !- Name
|
|
AUTOSIZE, !- Reference Capacity {W}
|
|
6.1, !- Reference COP {W/W}
|
|
6.67, !- Reference Leaving Chilled Water Temperature {C}
|
|
35, !- Reference Leaving Condenser Water Temperature {C}
|
|
AutoSize, !- Reference Chilled Water Flow Rate {m3/s}
|
|
AutoSize, !- Reference Condenser Water Flow Rate {m3/s}
|
|
WC Centrifugal Default 90.1-2004 Cap_fT, !- Cooling Capacity Function of Temperature Curve Name
|
|
WC Centrifugal Default 90.1-2004 EIR_fT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
|
|
, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Type
|
|
ReformEIRChiller Carrier 19XR 1259kW/6.26COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
|
|
0.1, !- Minimum Part Load Ratio
|
|
1, !- Maximum Part Load Ratio
|
|
1, !- Optimum Part Load Ratio
|
|
0.2, !- Minimum Unloading Ratio
|
|
CoolSys1 Pump-CoolSys1 ChillerNode, !- Chilled Water Inlet Node Name
|
|
CoolSys1 Supply Equipment Outlet Node, !- Chilled Water Outlet Node Name
|
|
CoolSys1 Chiller Water Inlet Node, !- Condenser Inlet Node Name
|
|
CoolSys1 Chiller Water Outlet Node, !- Condenser Outlet Node Name
|
|
1, !- Fraction of Compressor Electric Consumption Rejected by Condenser
|
|
2, !- Leaving Chilled Water Lower Temperature Limit {C}
|
|
LeavingSetpointModulated,!- Chiller Flow Mode Type
|
|
, !- Design Heat Recovery Water Flow Rate {m3/s}
|
|
, !- Heat Recovery Inlet Node Name
|
|
, !- Heat Recovery Outlet Node Name
|
|
1.0; !- Sizing Factor
|
|
|
|
SetpointManager:Scheduled,
|
|
CoolSys1 Chiller Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CW-Loop-Temp-Schedule, !- Schedule Name
|
|
CoolSys1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
CoolingTower:SingleSpeed,
|
|
TowerWaterSys CoolTower, !- Name
|
|
TowerWaterSys Pump-TowerWaterSys CoolTowerNode, !- Water Inlet Node Name
|
|
TowerWaterSys Supply Equipment Outlet Node, !- Water Outlet Node Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Design Fan Power {W}
|
|
AUTOSIZE, !- Design U-Factor Times Area Value {W/K}
|
|
autocalculate, !- Free Convection Regime Air Flow Rate {m3/s}
|
|
, !- Free Convection Regime Air Flow Rate Sizing Factor
|
|
autocalculate, !- Free Convection Regime U-Factor Times Area Value {W/K}
|
|
, !- Free Convection U-Factor Times Area Value Sizing Factor
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
, !- Heat Rejection Capacity and Nominal Capacity Sizing Ratio
|
|
, !- Nominal Capacity {W}
|
|
, !- Free Convection Capacity {W}
|
|
, !- Free Convection Nominal Capacity Sizing Factor
|
|
, !- Design Inlet Air Dry-Bulb Temperature {C}
|
|
, !- Design Inlet Air Wet-Bulb Temperature {C}
|
|
, !- Design Approach Temperature {deltaC}
|
|
, !- Design Range Temperature {deltaC}
|
|
, !- Basin Heater Capacity {W/K}
|
|
, !- Basin Heater Setpoint Temperature {C}
|
|
, !- Basin Heater Operating Schedule Name
|
|
SaturatedExit, !- Evaporation Loss Mode
|
|
, !- Evaporation Loss Factor {percent/K}
|
|
0.0080, !- Drift Loss Percent {percent}
|
|
ConcentrationRatio, !- Blowdown Calculation Mode
|
|
3.0000, !- Blowdown Concentration Ratio
|
|
, !- Blowdown Makeup Water Usage Schedule Name
|
|
, !- Supply Water Storage Tank Name
|
|
TowerWaterSys CoolTower OA ref Node, !- Outdoor Air Inlet Node Name
|
|
FanCycling, !- Capacity Control
|
|
, !- Number of Cells
|
|
, !- Cell Control
|
|
, !- Cell Minimum Water Flow Rate Fraction
|
|
, !- Cell Maximum Water Flow Rate Fraction
|
|
1.0000; !- Sizing Factor
|
|
|
|
Pump:ConstantSpeed,
|
|
TowerWaterSys Pump, !- Name
|
|
TowerWaterSys Supply Inlet Node, !- Inlet Node Name
|
|
TowerWaterSys Pump-TowerWaterSys CoolTowerNodeviaConnector, !- Outlet Node Name
|
|
AUTOSIZE, !- Design Flow Rate {m3/s}
|
|
179352, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.87, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
Intermittent; !- Pump Control Type
|
|
|
|
Pump:VariableSpeed,
|
|
CoolSys1 Pump, !- Name
|
|
CoolSys1 Supply Inlet Node, !- Inlet Node Name
|
|
CoolSys1 Pump-CoolSys1 ChillerNodeviaConnector, !- Outlet Node Name
|
|
AUTOSIZE, !- Design Maximum Flow Rate {m3/s}
|
|
179352, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.9, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
0, !- Coefficient 1 of the Part Load Performance Curve
|
|
1, !- Coefficient 2 of the Part Load Performance Curve
|
|
0, !- Coefficient 3 of the Part Load Performance Curve
|
|
0, !- Coefficient 4 of the Part Load Performance Curve
|
|
0.0, !- Design Minimum Flow Rate {m3/s}
|
|
Intermittent; !- Pump Control Type
|
|
|
|
Pump:VariableSpeed,
|
|
HeatSys1 Pump, !- Name
|
|
HeatSys1 Supply Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector, !- Outlet Node Name
|
|
AUTOSIZE, !- Design Maximum Flow Rate {m3/s}
|
|
179352, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.9, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
0, !- Coefficient 1 of the Part Load Performance Curve
|
|
1, !- Coefficient 2 of the Part Load Performance Curve
|
|
0, !- Coefficient 3 of the Part Load Performance Curve
|
|
0, !- Coefficient 4 of the Part Load Performance Curve
|
|
0.0, !- Design Minimum Flow Rate {m3/s}
|
|
Intermittent; !- Pump Control Type
|
|
|
|
PlantEquipmentList,
|
|
CoolSys1 Equipment List, !- Name
|
|
Chiller:Electric:ReformulatedEIR, !- Equipment 1 Object Type
|
|
CoolSys1 Chiller; !- Equipment 1 Name
|
|
|
|
PlantEquipmentList,
|
|
HeatSys1 Equipment List, !- Name
|
|
Boiler:HotWater, !- Equipment 1 Object Type
|
|
HeatSys1 Boiler; !- Equipment 1 Name
|
|
|
|
! ***SIZING & CONTROLS***
|
|
|
|
Sizing:Plant,
|
|
CoolSys1, !- Plant or Condenser Loop Name
|
|
Cooling, !- Loop Type
|
|
6.67, !- Design Loop Exit Temperature {C}
|
|
6.67; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
Sizing:Plant,
|
|
HeatSys1, !- Plant or Condenser Loop Name
|
|
Heating, !- Loop Type
|
|
82.2, !- Design Loop Exit Temperature {C}
|
|
11.1; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
Sizing:Plant,
|
|
TowerWaterSys, !- Plant or Condenser Loop Name
|
|
CONDENSER, !- Loop Type
|
|
29.4, !- Design Loop Exit Temperature {C}
|
|
5.6; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
SetpointManager:Scheduled,
|
|
CoolSys1 Loop Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
CW-Loop-Temp-Schedule, !- Schedule Name
|
|
CoolSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:Scheduled,
|
|
HeatSys1 Loop Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
HW-Loop-Temp-Schedule, !- Schedule Name
|
|
HeatSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
PlantEquipmentOperationSchemes,
|
|
CoolSys1 Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:CoolingLoad, !- Control Scheme 1 Object Type
|
|
CoolSys1 Operation Scheme, !- Control Scheme 1 Name
|
|
PlantOnSched; !- Control Scheme 1 Schedule Name
|
|
|
|
PlantEquipmentOperationSchemes,
|
|
HeatSys1 Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type
|
|
HeatSys1 Operation Scheme, !- Control Scheme 1 Name
|
|
PlantOnSched; !- Control Scheme 1 Schedule Name
|
|
|
|
CondenserEquipmentOperationSchemes,
|
|
TowerWaterSys Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:CoolingLoad, !- Control Scheme 1 Object Type
|
|
TowerWaterSys Operation Scheme, !- Control Scheme 1 Name
|
|
PlantOnSched; !- Control Scheme 1 Schedule Name
|
|
|
|
CondenserEquipmentList,
|
|
TowerWaterSys Equipment List, !- Name
|
|
CoolingTower:SingleSpeed,!- Equipment 1 Object Type
|
|
TowerWaterSys CoolTower; !- Equipment 1 Name
|
|
|
|
PlantEquipmentOperation:HeatingLoad,
|
|
HeatSys1 Operation Scheme, !- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
1000000000000000, !- Load Range 1 Upper Limit {W}
|
|
HeatSys1 Equipment List; !- Range 1 Equipment List Name
|
|
|
|
PlantEquipmentOperation:CoolingLoad,
|
|
CoolSys1 Operation Scheme, !- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
100000000000000, !- Load Range 1 Upper Limit {W}
|
|
CoolSys1 Equipment List; !- Range 1 Equipment List Name
|
|
|
|
PlantEquipmentOperation:CoolingLoad,
|
|
TowerWaterSys Operation Scheme, !- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
1000000000000, !- Load Range 1 Upper Limit {W}
|
|
TowerWaterSys Equipment List; !- Range 1 Equipment List Name
|
|
|
|
! Curve adapted by R. Lord for ANSI/ASHRAE/IESNA 90.1-2004 performance
|
|
! for a water-cooled, centrifugal chiller
|
|
|
|
Curve:Biquadratic,
|
|
WC Centrifugal Default 90.1-2004 Cap_fT, !- Name
|
|
0.7446451, !- Coefficient1 Constant
|
|
0.0114858, !- Coefficient2 x
|
|
0.0000148, !- Coefficient3 x**2
|
|
0.0224010, !- Coefficient4 y
|
|
-0.0006880, !- Coefficient5 y**2
|
|
0.0009839, !- Coefficient6 x*y
|
|
0.0, !- Minimum Value of x
|
|
20.0, !- Maximum Value of x
|
|
0.0, !- Minimum Value of y
|
|
50.0; !- Maximum Value of y
|
|
|
|
! Curve adapted by R. Lord for ANSI/ASHRAE/IESNA 90.1-2004 performance
|
|
! for a water-cooled, centrifugal chiller
|
|
|
|
Curve:Biquadratic,
|
|
WC Centrifugal Default 90.1-2004 EIR_fT, !- Name
|
|
0.7728770, !- Coefficient1 Constant
|
|
0.0221010, !- Coefficient2 x
|
|
-0.0000799, !- Coefficient3 x**2
|
|
-0.0070045, !- Coefficient4 y
|
|
0.0004763, !- Coefficient5 y**2
|
|
-0.0010612, !- Coefficient6 x*y
|
|
0.0, !- Minimum Value of x
|
|
20.0, !- Maximum Value of x
|
|
0.0, !- Minimum Value of y
|
|
50.0; !- Maximum Value of y
|
|
|
|
!Curve from EnergyPlus Chiller dataset
|
|
! Energy Input to Cooling Output Ratio Function of Part Load Ratio Curve
|
|
! x = Leaving Condenser Water Temperature and y = Part Load Ratio (load/capacity)
|
|
|
|
Curve:Bicubic,
|
|
ReformEIRChiller Carrier 19XR 1259kW/6.26COP/Vanes EIRFPLR, !- Name
|
|
4.602131E-02, !- Coefficient1 Constant
|
|
2.433945E-02, !- Coefficient2 x
|
|
6.394526E-05, !- Coefficient3 x**2
|
|
-3.648563E-01, !- Coefficient4 y
|
|
1.854759E+00, !- Coefficient5 y**2
|
|
-2.809346E-02, !- Coefficient6 x*y
|
|
0.000000E+00, !- Coefficient7 x**3
|
|
-4.821515E-01, !- Coefficient8 y**3
|
|
0.000000E+00, !- Coefficient9 x**2*y
|
|
0.000000E+00, !- Coefficient10 x*y**2
|
|
14.56, !- Minimum Value of x
|
|
34.97, !- Maximum Value of x
|
|
0.18, !- Minimum Value of y
|
|
1.03, !- Maximum Value of y
|
|
, !- Minimum Curve Output
|
|
, !- Maximum Curve Output
|
|
Temperature, !- Input Unit Type for X
|
|
Dimensionless, !- Input Unit Type for Y
|
|
Dimensionless; !- Output Unit Type
|
|
|
|
! ***LOOP***
|
|
|
|
PlantLoop,
|
|
CoolSys1, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
CoolSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
|
|
CoolSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
|
|
98.0, !- Maximum Loop Temperature {C}
|
|
1.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Plant Loop Volume {m3}
|
|
CoolSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
|
|
CoolSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
|
|
CoolSys1 Supply Branches,!- Plant Side Branch List Name
|
|
CoolSys1 Supply Connectors, !- Plant Side Connector List Name
|
|
CoolSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
CoolSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
CoolSys1 Demand Branches,!- Demand Side Branch List Name
|
|
CoolSys1 Demand Connectors, !- Demand Side Connector List Name
|
|
Optimal; !- Load Distribution Scheme
|
|
|
|
PlantLoop,
|
|
HeatSys1, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
HeatSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
|
|
HeatSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
|
|
100.0, !- Maximum Loop Temperature {C}
|
|
10.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Plant Loop Volume {m3}
|
|
HeatSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
|
|
HeatSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
|
|
HeatSys1 Supply Branches,!- Plant Side Branch List Name
|
|
HeatSys1 Supply Connectors, !- Plant Side Connector List Name
|
|
HeatSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
HeatSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
HeatSys1 Demand Branches,!- Demand Side Branch List Name
|
|
HeatSys1 Demand Connectors, !- Demand Side Connector List Name
|
|
Optimal; !- Load Distribution Scheme
|
|
|
|
CondenserLoop,
|
|
TowerWaterSys, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
TowerWaterSys Loop Operation Scheme List, !- Condenser Equipment Operation Scheme Name
|
|
TowerWaterSys Supply Outlet Node, !- Condenser Loop Temperature Setpoint Node Name
|
|
80.0, !- Maximum Loop Temperature {C}
|
|
5.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Condenser Loop Volume {m3}
|
|
TowerWaterSys Supply Inlet Node, !- Condenser Side Inlet Node Name
|
|
TowerWaterSys Supply Outlet Node, !- Condenser Side Outlet Node Name
|
|
TowerWaterSys Supply Branches, !- Condenser Side Branch List Name
|
|
TowerWaterSys Supply Connectors, !- Condenser Side Connector List Name
|
|
TowerWaterSys Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
TowerWaterSys Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
TowerWaterSys Demand Branches, !- Condenser Demand Side Branch List Name
|
|
TowerWaterSys Demand Connectors, !- Condenser Demand Side Connector List Name
|
|
SequentialLoad; !- Load Distribution Scheme
|
|
|
|
SetpointManager:FollowOutdoorAirTemperature,
|
|
MyCondenserControl, !- Name
|
|
Temperature, !- Control Variable
|
|
OutdoorAirWetBulb, !- Reference Temperature Type
|
|
0, !- Offset Temperature Difference {deltaC}
|
|
80, !- Maximum Setpoint Temperature {C}
|
|
5, !- Minimum Setpoint Temperature {C}
|
|
TowerWaterSys Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
! ***CONNECTIONS***
|
|
|
|
BranchList,
|
|
CoolSys1 Demand Branches,!- Name
|
|
CoolSys1 Demand Inlet Branch, !- Branch 1 Name
|
|
CoolSys1 Demand Load Branch 1, !- Branch 2 Name
|
|
CoolSys1 Demand Load Branch 2, !- Branch 3 Name
|
|
CoolSys1 Demand Load Branch 3, !- Branch 4 Name
|
|
CoolSys1 Demand Load Branch 4, !- Branch 5 Name
|
|
CoolSys1 Demand Bypass Branch, !- Branch 6 Name
|
|
CoolSys1 Demand Outlet Branch; !- Branch 7 Name
|
|
|
|
BranchList,
|
|
CoolSys1 Supply Branches,!- Name
|
|
CoolSys1 Supply Inlet Branch, !- Branch 1 Name
|
|
CoolSys1 Supply Equipment Branch, !- Branch 2 Name
|
|
CoolSys1 Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
CoolSys1 Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
BranchList,
|
|
HeatSys1 Demand Branches,!- Name
|
|
HeatSys1 Demand Inlet Branch, !- Branch 1 Name
|
|
HeatSys1 Demand Load Branch 1, !- Branch 2 Name
|
|
HeatSys1 Demand Load Branch 2, !- Branch 3 Name
|
|
HeatSys1 Demand Load Branch 3, !- Branch 4 Name
|
|
HeatSys1 Demand Load Branch 4, !- Branch 5 Name
|
|
HeatSys1 Demand Load Branch 5, !- Branch 6 Name
|
|
HeatSys1 Demand Load Branch 6, !- Branch 7 Name
|
|
HeatSys1 Demand Load Branch 7, !- Branch 8 Name
|
|
HeatSys1 Demand Load Branch 8, !- Branch 9 Name
|
|
HeatSys1 Demand Load Branch 9, !- Branch 10 Name
|
|
HeatSys1 Demand Load Branch 10, !- Branch 11 Name
|
|
HeatSys1 Demand Load Branch 11, !- Branch 12 Name
|
|
HeatSys1 Demand Load Branch 12, !- Branch 13 Name
|
|
HeatSys1 Demand Load Branch 13, !- Branch 14 Name
|
|
HeatSys1 Demand Load Branch 14, !- Branch 15 Name
|
|
HeatSys1 Demand Load Branch 15, !- Branch 16 Name
|
|
HeatSys1 Demand Load Branch 16, !- Branch 17 Name
|
|
HeatSys1 Demand Load Branch 17, !- Branch 18 Name
|
|
HeatSys1 Demand Load Branch 18, !- Branch 19 Name
|
|
HeatSys1 Demand Load Branch 19, !- Branch 20 Name
|
|
HeatSys1 Demand Load Branch 20, !- Branch 21 Name
|
|
HeatSys1 Demand Load Branch 21, !- Branch 22 Name
|
|
HeatSys1 Demand Load Branch 22, !- Branch 23 Name
|
|
HeatSys1 Demand Load Branch 23, !- Branch 24 Name
|
|
HeatSys1 Demand Load Branch 24, !- Branch 25 Name
|
|
HeatSys1 Demand Load Branch 25, !- Branch 26 Name
|
|
HeatSys1 Demand Load Branch 26, !- Branch 27 Name
|
|
HeatSys1 Demand Load Branch 27, !- Branch 28 Name
|
|
HeatSys1 Demand Load Branch 28, !- Branch 29 Name
|
|
HeatSys1 Demand Load Branch 29, !- Branch 30 Name
|
|
HeatSys1 Demand Load Branch 30, !- Branch 31 Name
|
|
HeatSys1 Demand Load Branch 31, !- Branch 32 Name
|
|
HeatSys1 Demand Load Branch 32, !- Branch 33 Name
|
|
HeatSys1 Demand Load Branch 33, !- Branch 34 Name
|
|
HeatSys1 Demand Load Branch 34, !- Branch 35 Name
|
|
HeatSys1 Demand Load Branch 35, !- Branch 36 Name
|
|
HeatSys1 Demand Load Branch 36, !- Branch 37 Name
|
|
HeatSys1 Demand Load Branch 37, !- Branch 38 Name
|
|
HeatSys1 Demand Load Branch 38, !- Branch 39 Name
|
|
HeatSys1 Demand Load Branch 39, !- Branch 40 Name
|
|
HeatSys1 Demand Load Branch 40, !- Branch 41 Name
|
|
HeatSys1 Demand Load Branch 41, !- Branch 42 Name
|
|
HeatSys1 Demand Load Branch 42, !- Branch 43 Name
|
|
HeatSys1 Demand Load Branch 43, !- Branch 44 Name
|
|
HeatSys1 Demand Load Branch 44, !- Branch 45 Name
|
|
HeatSys1 Demand Load Branch 45, !- Branch 46 Name
|
|
HeatSys1 Demand Load Branch 46, !- Branch 47 Name
|
|
HeatSys1 Demand Load Branch 47, !- Branch 48 Name
|
|
HeatSys1 Demand Load Branch 48, !- Branch 49 Name
|
|
HeatSys1 Demand Load Branch 49, !- Branch 50 Name
|
|
HeatSys1 Demand Load Branch 50, !- Branch 51 Name
|
|
HeatSys1 Demand Load Branch 51, !- Branch 52 Name
|
|
HeatSys1 Demand Load Branch 52, !- Branch 53 Name
|
|
HeatSys1 Demand Load Branch 53, !- Branch 54 Name
|
|
HeatSys1 Demand Load Branch 54, !- Branch 55 Name
|
|
HeatSys1 Demand Load Branch 55, !- Branch 56 Name
|
|
HeatSys1 Demand Load Branch 56, !- Branch 57 Name
|
|
HeatSys1 Demand Load Branch 57, !- Branch 58 Name
|
|
HeatSys1 Demand Load Branch 58, !- Branch 59 Name
|
|
HeatSys1 Demand Load Branch 59, !- Branch 60 Name
|
|
HeatSys1 Demand Bypass Branch, !- Branch 61 Name
|
|
HeatSys1 Demand Outlet Branch; !- Branch 62 Name
|
|
|
|
BranchList,
|
|
HeatSys1 Supply Branches,!- Name
|
|
HeatSys1 Supply Inlet Branch, !- Branch 1 Name
|
|
HeatSys1 Supply Equipment Branch, !- Branch 2 Name
|
|
HeatSys1 Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
HeatSys1 Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
BranchList,
|
|
TowerWaterSys Demand Branches, !- Name
|
|
TowerWaterSys Demand Inlet Branch, !- Branch 1 Name
|
|
TowerWaterSys Demand Load Branch 1, !- Branch 2 Name
|
|
TowerWaterSys Demand Bypass Branch, !- Branch 3 Name
|
|
TowerWaterSys Demand Outlet Branch; !- Branch 4 Name
|
|
|
|
BranchList,
|
|
TowerWaterSys Supply Branches, !- Name
|
|
TowerWaterSys Supply Inlet Branch, !- Branch 1 Name
|
|
TowerWaterSys Supply Equipment Branch, !- Branch 2 Name
|
|
TowerWaterSys Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
TowerWaterSys Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Demand Bypass Pipe, !- Component 1 Name
|
|
CoolSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
CoolSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Demand Inlet Pipe, !- Component 1 Name
|
|
CoolSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
CoolSys1 Demand Inlet Pipe-CoolSys1 Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water:DetailedGeometry, !- Component 1 Object Type
|
|
VAV_1_CoolC, !- Component 1 Name
|
|
VAV_1_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_1_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water:DetailedGeometry, !- Component 1 Object Type
|
|
CAV_1_CoolC, !- Component 1 Name
|
|
CAV_1_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
CAV_1_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 3, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water:DetailedGeometry, !- Component 1 Object Type
|
|
CAV_2_CoolC, !- Component 1 Name
|
|
CAV_2_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
CAV_2_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Load Branch 4, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Cooling:Water:DetailedGeometry, !- Component 1 Object Type
|
|
VAV_2_CoolC, !- Component 1 Name
|
|
VAV_2_CoolCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_2_CoolCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Demand Outlet Pipe, !- Component 1 Name
|
|
CoolSys1 Demand Mixer-CoolSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
CoolSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Chiller:Electric:ReformulatedEIR, !- Component 1 Object Type
|
|
CoolSys1 Chiller, !- Component 1 Name
|
|
CoolSys1 Pump-CoolSys1 ChillerNode, !- Component 1 Inlet Node Name
|
|
CoolSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
CoolSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
CoolSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:VariableSpeed, !- Component 1 Object Type
|
|
CoolSys1 Pump, !- Component 1 Name
|
|
CoolSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
CoolSys1 Pump-CoolSys1 ChillerNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
CoolSys1 Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
CoolSys1 Supply Outlet Pipe, !- Component 1 Name
|
|
CoolSys1 Supply Mixer-CoolSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
CoolSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Demand Bypass Pipe, !- Component 1 Name
|
|
HeatSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Demand Inlet Pipe, !- Component 1 Name
|
|
HeatSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Basement VAV Box Reheat Coil, !- Component 1 Name
|
|
Basement VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Basement VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 10, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
ER_NurseStn_Lobby_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 11, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
OR1_Flr_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
OR1_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
OR1_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 12, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
OR2_Mult5_Flr_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
OR2_Mult5_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
OR2_Mult5_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 13, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
OR3_Flr_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
OR3_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
OR3_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 14, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
OR4_Flr_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
OR4_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
OR4_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 15, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
IC_PatRoom1_Mult5_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 16, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
IC_PatRoom2_Flr_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
IC_PatRoom2_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
IC_PatRoom2_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 17, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
IC_PatRoom3_Mult6_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 18, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
ICU_Flr_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
ICU_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
ICU_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 19, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
ICU_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
ER_Exam1_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 20, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Corridor_Flr_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
Corridor_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Corridor_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 21, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Reheat Coil, !- Component 1 Name
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
OR_NurseStn_Lobby_Flr_2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 22, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom1_Mult10_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom1_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom1_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 23, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom2_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom2_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom2_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 24, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom3_Mult10_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom3_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom3_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 25, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom4_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom4_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom4_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 26, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom5_Mult10_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom5_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom5_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 27, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PhysTherapy_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
PhysTherapy_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PhysTherapy_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 28, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom6_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom6_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom6_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 29, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom7_Mult10_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom7_Mult10_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom7_Mult10_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 3, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
ER_Trauma1_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
ER_Trauma1_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
ER_Trauma1_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 30, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom8_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom8_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom8_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 31, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
NurseStn_Lobby_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
NurseStn_Lobby_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
NurseStn_Lobby_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 32, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Lab_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
Lab_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Lab_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 33, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Corridor_SE_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
Corridor_SE_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Corridor_SE_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 34, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Corridor_NW_Flr_3 VAV Box Reheat Coil, !- Component 1 Name
|
|
Corridor_NW_Flr_3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Corridor_NW_Flr_3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 35, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom1_Mult10_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom1_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom1_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 36, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom2_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom2_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom2_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 37, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom3_Mult10_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom3_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom3_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 38, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom4_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom4_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom4_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 39, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom5_Mult10_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom5_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom5_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 4, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
ER_Exam3_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 40, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Radiology_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
Radiology_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Radiology_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 41, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom6_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom6_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom6_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 42, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom7_Mult10_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom7_Mult10_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom7_Mult10_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 43, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
PatRoom8_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
PatRoom8_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom8_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 44, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
NurseStn_Lobby_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
NurseStn_Lobby_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
NurseStn_Lobby_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 45, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Lab_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
Lab_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Lab_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 46, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Corridor_SE_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
Corridor_SE_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Corridor_SE_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 47, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Corridor_NW_Flr_4 VAV Box Reheat Coil, !- Component 1 Name
|
|
Corridor_NW_Flr_4 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Corridor_NW_Flr_4 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 48, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Dining_Flr_5 VAV Box Reheat Coil, !- Component 1 Name
|
|
Dining_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Dining_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 49, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
NurseStn_Lobby_Flr_5 VAV Box Reheat Coil, !- Component 1 Name
|
|
NurseStn_Lobby_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
NurseStn_Lobby_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 5, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
ER_Trauma2_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
ER_Trauma2_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
ER_Trauma2_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 50, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Kitchen_Flr_5 VAV Box Reheat Coil, !- Component 1 Name
|
|
Kitchen_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Kitchen_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 51, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Office1_Flr_5 VAV Box Reheat Coil, !- Component 1 Name
|
|
Office1_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Office1_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 52, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Office2_Mult5_Flr_5 VAV Box Reheat Coil, !- Component 1 Name
|
|
Office2_Mult5_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Office2_Mult5_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 53, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Office3_Flr_5 VAV Box Reheat Coil, !- Component 1 Name
|
|
Office3_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Office3_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 54, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Office4_Mult6_Flr_5 VAV Box Reheat Coil, !- Component 1 Name
|
|
Office4_Mult6_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Office4_Mult6_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 55, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Corridor_Flr_5 VAV Box Reheat Coil, !- Component 1 Name
|
|
Corridor_Flr_5 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Corridor_Flr_5 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 56, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
VAV_1_HeatC, !- Component 1 Name
|
|
VAV_1_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_1_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 57, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
CAV_1_HeatC, !- Component 1 Name
|
|
CAV_1_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
CAV_1_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 58, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
CAV_2_HeatC, !- Component 1 Name
|
|
CAV_2_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
CAV_2_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 59, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
VAV_2_HeatC, !- Component 1 Name
|
|
VAV_2_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
VAV_2_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 6, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
ER_Triage_Mult4_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
ER_Triage_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
ER_Triage_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 7, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Office1_Mult4_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Office1_Mult4_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Office1_Mult4_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 8, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Lobby_Records_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Lobby_Records_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Lobby_Records_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 9, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Corridor_Flr_1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Corridor_Flr_1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Corridor_Flr_1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Demand Outlet Pipe, !- Component 1 Name
|
|
HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
HeatSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Boiler:HotWater, !- Component 1 Object Type
|
|
HeatSys1 Boiler, !- Component 1 Name
|
|
HeatSys1 Pump-HeatSys1 BoilerNode, !- Component 1 Inlet Node Name
|
|
HeatSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
HeatSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:VariableSpeed, !- Component 1 Object Type
|
|
HeatSys1 Pump, !- Component 1 Name
|
|
HeatSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Supply Outlet Pipe, !- Component 1 Name
|
|
HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
HeatSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
TowerWaterSys Demand Bypass Pipe, !- Component 1 Name
|
|
TowerWaterSys Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
TowerWaterSys Demand Inlet Pipe, !- Component 1 Name
|
|
TowerWaterSys Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Demand Inlet Pipe-TowerWaterSys Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Chiller:Electric:ReformulatedEIR, !- Component 1 Object Type
|
|
CoolSys1 Chiller, !- Component 1 Name
|
|
CoolSys1 Chiller Water Inlet Node, !- Component 1 Inlet Node Name
|
|
CoolSys1 Chiller Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
TowerWaterSys Demand Outlet Pipe, !- Component 1 Name
|
|
TowerWaterSys Demand Mixer-TowerWaterSys Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
CoolingTower:SingleSpeed,!- Component 1 Object Type
|
|
TowerWaterSys CoolTower, !- Component 1 Name
|
|
TowerWaterSys Pump-TowerWaterSys CoolTowerNode, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
TowerWaterSys Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
TowerWaterSys Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:ConstantSpeed, !- Component 1 Object Type
|
|
TowerWaterSys Pump, !- Component 1 Name
|
|
TowerWaterSys Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Pump-TowerWaterSys CoolTowerNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
TowerWaterSys Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
TowerWaterSys Supply Outlet Pipe, !- Component 1 Name
|
|
TowerWaterSys Supply Mixer-TowerWaterSys Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
TowerWaterSys Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
OutdoorAir:Node,
|
|
TowerWaterSys CoolTower OA ref Node; !- Name
|
|
|
|
ConnectorList,
|
|
CoolSys1 Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
CoolSys1 Demand Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
CoolSys1 Demand Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
CoolSys1 Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
CoolSys1 Supply Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
CoolSys1 Supply Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
HeatSys1 Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
HeatSys1 Demand Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
HeatSys1 Demand Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
HeatSys1 Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
HeatSys1 Supply Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
HeatSys1 Supply Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
TowerWaterSys Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
TowerWaterSys Demand Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
TowerWaterSys Demand Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
TowerWaterSys Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
TowerWaterSys Supply Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
TowerWaterSys Supply Mixer; !- Connector 2 Name
|
|
|
|
Connector:Splitter,
|
|
CoolSys1 Demand Splitter,!- Name
|
|
CoolSys1 Demand Inlet Branch, !- Inlet Branch Name
|
|
CoolSys1 Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
CoolSys1 Demand Load Branch 2, !- Outlet Branch 2 Name
|
|
CoolSys1 Demand Load Branch 3, !- Outlet Branch 3 Name
|
|
CoolSys1 Demand Load Branch 4, !- Outlet Branch 4 Name
|
|
CoolSys1 Demand Bypass Branch; !- Outlet Branch 5 Name
|
|
|
|
Connector:Splitter,
|
|
CoolSys1 Supply Splitter,!- Name
|
|
CoolSys1 Supply Inlet Branch, !- Inlet Branch Name
|
|
CoolSys1 Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
CoolSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Splitter,
|
|
HeatSys1 Demand Splitter,!- Name
|
|
HeatSys1 Demand Inlet Branch, !- Inlet Branch Name
|
|
HeatSys1 Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
HeatSys1 Demand Load Branch 2, !- Outlet Branch 2 Name
|
|
HeatSys1 Demand Load Branch 3, !- Outlet Branch 3 Name
|
|
HeatSys1 Demand Load Branch 4, !- Outlet Branch 4 Name
|
|
HeatSys1 Demand Load Branch 5, !- Outlet Branch 5 Name
|
|
HeatSys1 Demand Load Branch 6, !- Outlet Branch 6 Name
|
|
HeatSys1 Demand Load Branch 7, !- Outlet Branch 7 Name
|
|
HeatSys1 Demand Load Branch 8, !- Outlet Branch 8 Name
|
|
HeatSys1 Demand Load Branch 9, !- Outlet Branch 9 Name
|
|
HeatSys1 Demand Load Branch 10, !- Outlet Branch 10 Name
|
|
HeatSys1 Demand Load Branch 11, !- Outlet Branch 11 Name
|
|
HeatSys1 Demand Load Branch 12, !- Outlet Branch 12 Name
|
|
HeatSys1 Demand Load Branch 13, !- Outlet Branch 13 Name
|
|
HeatSys1 Demand Load Branch 14, !- Outlet Branch 14 Name
|
|
HeatSys1 Demand Load Branch 15, !- Outlet Branch 15 Name
|
|
HeatSys1 Demand Load Branch 16, !- Outlet Branch 16 Name
|
|
HeatSys1 Demand Load Branch 17, !- Outlet Branch 17 Name
|
|
HeatSys1 Demand Load Branch 18, !- Outlet Branch 18 Name
|
|
HeatSys1 Demand Load Branch 19, !- Outlet Branch 19 Name
|
|
HeatSys1 Demand Load Branch 20, !- Outlet Branch 20 Name
|
|
HeatSys1 Demand Load Branch 21, !- Outlet Branch 21 Name
|
|
HeatSys1 Demand Load Branch 22, !- Outlet Branch 22 Name
|
|
HeatSys1 Demand Load Branch 23, !- Outlet Branch 23 Name
|
|
HeatSys1 Demand Load Branch 24, !- Outlet Branch 24 Name
|
|
HeatSys1 Demand Load Branch 25, !- Outlet Branch 25 Name
|
|
HeatSys1 Demand Load Branch 26, !- Outlet Branch 26 Name
|
|
HeatSys1 Demand Load Branch 27, !- Outlet Branch 27 Name
|
|
HeatSys1 Demand Load Branch 28, !- Outlet Branch 28 Name
|
|
HeatSys1 Demand Load Branch 29, !- Outlet Branch 29 Name
|
|
HeatSys1 Demand Load Branch 30, !- Outlet Branch 30 Name
|
|
HeatSys1 Demand Load Branch 31, !- Outlet Branch 31 Name
|
|
HeatSys1 Demand Load Branch 32, !- Outlet Branch 32 Name
|
|
HeatSys1 Demand Load Branch 33, !- Outlet Branch 33 Name
|
|
HeatSys1 Demand Load Branch 34, !- Outlet Branch 34 Name
|
|
HeatSys1 Demand Load Branch 35, !- Outlet Branch 35 Name
|
|
HeatSys1 Demand Load Branch 36, !- Outlet Branch 36 Name
|
|
HeatSys1 Demand Load Branch 37, !- Outlet Branch 37 Name
|
|
HeatSys1 Demand Load Branch 38, !- Outlet Branch 38 Name
|
|
HeatSys1 Demand Load Branch 39, !- Outlet Branch 39 Name
|
|
HeatSys1 Demand Load Branch 40, !- Outlet Branch 40 Name
|
|
HeatSys1 Demand Load Branch 41, !- Outlet Branch 41 Name
|
|
HeatSys1 Demand Load Branch 42, !- Outlet Branch 42 Name
|
|
HeatSys1 Demand Load Branch 43, !- Outlet Branch 43 Name
|
|
HeatSys1 Demand Load Branch 44, !- Outlet Branch 44 Name
|
|
HeatSys1 Demand Load Branch 45, !- Outlet Branch 45 Name
|
|
HeatSys1 Demand Load Branch 46, !- Outlet Branch 46 Name
|
|
HeatSys1 Demand Load Branch 47, !- Outlet Branch 47 Name
|
|
HeatSys1 Demand Load Branch 48, !- Outlet Branch 48 Name
|
|
HeatSys1 Demand Load Branch 49, !- Outlet Branch 49 Name
|
|
HeatSys1 Demand Load Branch 50, !- Outlet Branch 50 Name
|
|
HeatSys1 Demand Load Branch 51, !- Outlet Branch 51 Name
|
|
HeatSys1 Demand Load Branch 52, !- Outlet Branch 52 Name
|
|
HeatSys1 Demand Load Branch 53, !- Outlet Branch 53 Name
|
|
HeatSys1 Demand Load Branch 54, !- Outlet Branch 54 Name
|
|
HeatSys1 Demand Load Branch 55, !- Outlet Branch 55 Name
|
|
HeatSys1 Demand Load Branch 56, !- Outlet Branch 56 Name
|
|
HeatSys1 Demand Load Branch 57, !- Outlet Branch 57 Name
|
|
HeatSys1 Demand Load Branch 58, !- Outlet Branch 58 Name
|
|
HeatSys1 Demand Load Branch 59, !- Outlet Branch 59 Name
|
|
HeatSys1 Demand Bypass Branch; !- Outlet Branch 60 Name
|
|
|
|
Connector:Splitter,
|
|
HeatSys1 Supply Splitter,!- Name
|
|
HeatSys1 Supply Inlet Branch, !- Inlet Branch Name
|
|
HeatSys1 Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
HeatSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Splitter,
|
|
TowerWaterSys Demand Splitter, !- Name
|
|
TowerWaterSys Demand Inlet Branch, !- Inlet Branch Name
|
|
TowerWaterSys Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
TowerWaterSys Demand Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Splitter,
|
|
TowerWaterSys Supply Splitter, !- Name
|
|
TowerWaterSys Supply Inlet Branch, !- Inlet Branch Name
|
|
TowerWaterSys Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
TowerWaterSys Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
CoolSys1 Demand Mixer, !- Name
|
|
CoolSys1 Demand Outlet Branch, !- Outlet Branch Name
|
|
CoolSys1 Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
CoolSys1 Demand Load Branch 2, !- Inlet Branch 2 Name
|
|
CoolSys1 Demand Load Branch 3, !- Inlet Branch 3 Name
|
|
CoolSys1 Demand Load Branch 4, !- Inlet Branch 4 Name
|
|
CoolSys1 Demand Bypass Branch; !- Inlet Branch 5 Name
|
|
|
|
Connector:Mixer,
|
|
CoolSys1 Supply Mixer, !- Name
|
|
CoolSys1 Supply Outlet Branch, !- Outlet Branch Name
|
|
CoolSys1 Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
CoolSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
HeatSys1 Demand Mixer, !- Name
|
|
HeatSys1 Demand Outlet Branch, !- Outlet Branch Name
|
|
HeatSys1 Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
HeatSys1 Demand Load Branch 2, !- Inlet Branch 2 Name
|
|
HeatSys1 Demand Load Branch 3, !- Inlet Branch 3 Name
|
|
HeatSys1 Demand Load Branch 4, !- Inlet Branch 4 Name
|
|
HeatSys1 Demand Load Branch 5, !- Inlet Branch 5 Name
|
|
HeatSys1 Demand Load Branch 6, !- Inlet Branch 6 Name
|
|
HeatSys1 Demand Load Branch 7, !- Inlet Branch 7 Name
|
|
HeatSys1 Demand Load Branch 8, !- Inlet Branch 8 Name
|
|
HeatSys1 Demand Load Branch 9, !- Inlet Branch 9 Name
|
|
HeatSys1 Demand Load Branch 10, !- Inlet Branch 10 Name
|
|
HeatSys1 Demand Load Branch 11, !- Inlet Branch 11 Name
|
|
HeatSys1 Demand Load Branch 12, !- Inlet Branch 12 Name
|
|
HeatSys1 Demand Load Branch 13, !- Inlet Branch 13 Name
|
|
HeatSys1 Demand Load Branch 14, !- Inlet Branch 14 Name
|
|
HeatSys1 Demand Load Branch 15, !- Inlet Branch 15 Name
|
|
HeatSys1 Demand Load Branch 16, !- Inlet Branch 16 Name
|
|
HeatSys1 Demand Load Branch 17, !- Inlet Branch 17 Name
|
|
HeatSys1 Demand Load Branch 18, !- Inlet Branch 18 Name
|
|
HeatSys1 Demand Load Branch 19, !- Inlet Branch 19 Name
|
|
HeatSys1 Demand Load Branch 20, !- Inlet Branch 20 Name
|
|
HeatSys1 Demand Load Branch 21, !- Inlet Branch 21 Name
|
|
HeatSys1 Demand Load Branch 22, !- Inlet Branch 22 Name
|
|
HeatSys1 Demand Load Branch 23, !- Inlet Branch 23 Name
|
|
HeatSys1 Demand Load Branch 24, !- Inlet Branch 24 Name
|
|
HeatSys1 Demand Load Branch 25, !- Inlet Branch 25 Name
|
|
HeatSys1 Demand Load Branch 26, !- Inlet Branch 26 Name
|
|
HeatSys1 Demand Load Branch 27, !- Inlet Branch 27 Name
|
|
HeatSys1 Demand Load Branch 28, !- Inlet Branch 28 Name
|
|
HeatSys1 Demand Load Branch 29, !- Inlet Branch 29 Name
|
|
HeatSys1 Demand Load Branch 30, !- Inlet Branch 30 Name
|
|
HeatSys1 Demand Load Branch 31, !- Inlet Branch 31 Name
|
|
HeatSys1 Demand Load Branch 32, !- Inlet Branch 32 Name
|
|
HeatSys1 Demand Load Branch 33, !- Inlet Branch 33 Name
|
|
HeatSys1 Demand Load Branch 34, !- Inlet Branch 34 Name
|
|
HeatSys1 Demand Load Branch 35, !- Inlet Branch 35 Name
|
|
HeatSys1 Demand Load Branch 36, !- Inlet Branch 36 Name
|
|
HeatSys1 Demand Load Branch 37, !- Inlet Branch 37 Name
|
|
HeatSys1 Demand Load Branch 38, !- Inlet Branch 38 Name
|
|
HeatSys1 Demand Load Branch 39, !- Inlet Branch 39 Name
|
|
HeatSys1 Demand Load Branch 40, !- Inlet Branch 40 Name
|
|
HeatSys1 Demand Load Branch 41, !- Inlet Branch 41 Name
|
|
HeatSys1 Demand Load Branch 42, !- Inlet Branch 42 Name
|
|
HeatSys1 Demand Load Branch 43, !- Inlet Branch 43 Name
|
|
HeatSys1 Demand Load Branch 44, !- Inlet Branch 44 Name
|
|
HeatSys1 Demand Load Branch 45, !- Inlet Branch 45 Name
|
|
HeatSys1 Demand Load Branch 46, !- Inlet Branch 46 Name
|
|
HeatSys1 Demand Load Branch 47, !- Inlet Branch 47 Name
|
|
HeatSys1 Demand Load Branch 48, !- Inlet Branch 48 Name
|
|
HeatSys1 Demand Load Branch 49, !- Inlet Branch 49 Name
|
|
HeatSys1 Demand Load Branch 50, !- Inlet Branch 50 Name
|
|
HeatSys1 Demand Load Branch 51, !- Inlet Branch 51 Name
|
|
HeatSys1 Demand Load Branch 52, !- Inlet Branch 52 Name
|
|
HeatSys1 Demand Load Branch 53, !- Inlet Branch 53 Name
|
|
HeatSys1 Demand Load Branch 54, !- Inlet Branch 54 Name
|
|
HeatSys1 Demand Load Branch 55, !- Inlet Branch 55 Name
|
|
HeatSys1 Demand Load Branch 56, !- Inlet Branch 56 Name
|
|
HeatSys1 Demand Load Branch 57, !- Inlet Branch 57 Name
|
|
HeatSys1 Demand Load Branch 58, !- Inlet Branch 58 Name
|
|
HeatSys1 Demand Load Branch 59, !- Inlet Branch 59 Name
|
|
HeatSys1 Demand Bypass Branch; !- Inlet Branch 60 Name
|
|
|
|
Connector:Mixer,
|
|
HeatSys1 Supply Mixer, !- Name
|
|
HeatSys1 Supply Outlet Branch, !- Outlet Branch Name
|
|
HeatSys1 Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
HeatSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
TowerWaterSys Demand Mixer, !- Name
|
|
TowerWaterSys Demand Outlet Branch, !- Outlet Branch Name
|
|
TowerWaterSys Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
TowerWaterSys Demand Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
TowerWaterSys Supply Mixer, !- Name
|
|
TowerWaterSys Supply Outlet Branch, !- Outlet Branch Name
|
|
TowerWaterSys Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
TowerWaterSys Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Demand Bypass Pipe, !- Name
|
|
CoolSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
CoolSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Demand Inlet Pipe, !- Name
|
|
CoolSys1 Demand Inlet Node, !- Inlet Node Name
|
|
CoolSys1 Demand Inlet Pipe-CoolSys1 Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Demand Outlet Pipe, !- Name
|
|
CoolSys1 Demand Mixer-CoolSys1 Demand Outlet Pipe, !- Inlet Node Name
|
|
CoolSys1 Demand Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Supply Equipment Bypass Pipe, !- Name
|
|
CoolSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
CoolSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
CoolSys1 Supply Outlet Pipe, !- Name
|
|
CoolSys1 Supply Mixer-CoolSys1 Supply Outlet Pipe, !- Inlet Node Name
|
|
CoolSys1 Supply Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Demand Bypass Pipe, !- Name
|
|
HeatSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Demand Inlet Pipe, !- Name
|
|
HeatSys1 Demand Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Demand Outlet Pipe, !- Name
|
|
HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Inlet Node Name
|
|
HeatSys1 Demand Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Supply Equipment Bypass Pipe, !- Name
|
|
HeatSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Supply Outlet Pipe, !- Name
|
|
HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Inlet Node Name
|
|
HeatSys1 Supply Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
TowerWaterSys Demand Bypass Pipe, !- Name
|
|
TowerWaterSys Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
TowerWaterSys Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
TowerWaterSys Demand Inlet Pipe, !- Name
|
|
TowerWaterSys Demand Inlet Node, !- Inlet Node Name
|
|
TowerWaterSys Demand Inlet Pipe-TowerWaterSys Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
TowerWaterSys Demand Outlet Pipe, !- Name
|
|
TowerWaterSys Demand Mixer-TowerWaterSys Demand Outlet Pipe, !- Inlet Node Name
|
|
TowerWaterSys Demand Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
TowerWaterSys Supply Equipment Bypass Pipe, !- Name
|
|
TowerWaterSys Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
TowerWaterSys Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
TowerWaterSys Supply Outlet Pipe, !- Name
|
|
TowerWaterSys Supply Mixer-TowerWaterSys Supply Outlet Pipe, !- Inlet Node Name
|
|
TowerWaterSys Supply Outlet Node; !- Outlet Node Name
|
|
|
|
! ***SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
CW-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,6.7; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HW-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,82.2; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
PlantOnSched, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Curve:Quadratic,
|
|
RACK1_RackCOPfTCurve, !- Name
|
|
1.7603, !- Coefficient1 Constant
|
|
-0.0377, !- Coefficient2 x
|
|
0.0004, !- Coefficient3 x**2
|
|
10.0000, !- Minimum Value of x
|
|
35.0000; !- Maximum Value of x
|
|
|
|
Curve:Quadratic,
|
|
RACK1_RackCondFanCurve2, !- Name
|
|
0.0000, !- Coefficient1 Constant
|
|
0.0286, !- Coefficient2 x
|
|
0.0000, !- Coefficient3 x**2
|
|
0.0000, !- Minimum Value of x
|
|
35.0000; !- Maximum Value of x
|
|
|
|
Curve:Quadratic,
|
|
RACK2_RackCOPfTCurve, !- Name
|
|
1.0000, !- Coefficient1 Constant
|
|
0.0000, !- Coefficient2 x
|
|
0.0000, !- Coefficient3 x**2
|
|
0.0000, !- Minimum Value of x
|
|
50.0000; !- Maximum Value of x
|
|
|
|
Curve:Cubic,
|
|
Kitchen_Flr_5_Case:1_WALKINFREEZERSingleShelfHorizontal_LatentEnergyMult, !- Name
|
|
0.020376, !- Coefficient1 Constant
|
|
0.00024378, !- Coefficient2 x
|
|
0.0000114, !- Coefficient3 x**2
|
|
0.0000001811, !- Coefficient4 x**3
|
|
-35.0, !- Minimum Value of x
|
|
20.0; !- Maximum Value of x
|
|
|
|
Curve:Cubic,
|
|
Kitchen_Flr_5_Case:2_SELFCONTAINEDDISPLAYCASEMultiShelfVertical_LatentEnergyMult, !- Name
|
|
0.026526281, !- Coefficient1 Constant
|
|
0.001078032, !- Coefficient2 x
|
|
-0.0000602558, !- Coefficient3 x**2
|
|
0.00000123732, !- Coefficient4 x**3
|
|
-35.0, !- Minimum Value of x
|
|
20.0; !- Maximum Value of x
|
|
|
|
OutdoorAir:Node,
|
|
RACK1_condenserInlet; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
RACK2_condenserInlet; !- Name
|
|
|
|
Refrigeration:Case,
|
|
Kitchen_Flr_5_Case:1_WALKINFREEZER, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Kitchen_Flr_5, !- Zone Name
|
|
23.8800, !- Rated Ambient Temperature {C}
|
|
55.0000, !- Rated Ambient Relative Humidity {percent}
|
|
734.0000, !- Rated Total Cooling Capacity per Unit Length {W/m}
|
|
0.1000, !- Rated Latent Heat Ratio
|
|
0.4000, !- Rated Runtime Fraction
|
|
10.9800, !- Case Length {m}
|
|
-23.0000, !- Case Operating Temperature {C}
|
|
CaseTemperatureMethod, !- Latent Case Credit Curve Type
|
|
Kitchen_Flr_5_Case:1_WALKINFREEZERSingleShelfHorizontal_LatentEnergyMult, !- Latent Case Credit Curve Name
|
|
69.0000, !- Standard Case Fan Power per Unit Length {W/m}
|
|
69.0000, !- Operating Case Fan Power per Unit Length {W/m}
|
|
33.0000, !- Standard Case Lighting Power per Unit Length {W/m}
|
|
, !- Installed Case Lighting Power per Unit Length {W/m}
|
|
BLDG_LIGHT_SCH, !- Case Lighting Schedule Name
|
|
1.0000, !- Fraction of Lighting Energy to Case
|
|
0.0000, !- Case Anti-Sweat Heater Power per Unit Length {W/m}
|
|
0.0000, !- Minimum Anti-Sweat Heater Power per Unit Length {W/m}
|
|
None, !- Anti-Sweat Heater Control Type
|
|
0.0, !- Humidity at Zero Anti-Sweat Heater Energy {percent}
|
|
0.0, !- Case Height {m}
|
|
0.0000, !- Fraction of Anti-Sweat Heater Energy to Case
|
|
364.0000, !- Case Defrost Power per Unit Length {W/m}
|
|
ELECTRIC, !- Case Defrost Type
|
|
Kitchen_Flr_5_Case:1_WALKINFREEZER_CaseDefrost2aDaySched, !- Case Defrost Schedule Name
|
|
Kitchen_Flr_5_Case:1_WALKINFREEZER_CaseDripDown2aDaySched, !- Case Defrost Drip-Down Schedule Name
|
|
None, !- Defrost Energy Correction Curve Type
|
|
, !- Defrost Energy Correction Curve Name
|
|
0.0000, !- Under Case HVAC Return Air Fraction
|
|
Kitchen_Flr_5_Case:1_WALKINFREEZER_WalkInStockingSched, !- Refrigerated Case Restocking Schedule Name
|
|
Kitchen_Flr_5_Case:1_WALKINFREEZER_CaseCreditReduxSched; !- Case Credit Fraction Schedule Name
|
|
|
|
Refrigeration:Case,
|
|
Kitchen_Flr_5_Case:2_SELFCONTAINEDDISPLAYCASE, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Kitchen_Flr_5, !- Zone Name
|
|
23.8800, !- Rated Ambient Temperature {C}
|
|
55.0000, !- Rated Ambient Relative Humidity {percent}
|
|
886.5000, !- Rated Total Cooling Capacity per Unit Length {W/m}
|
|
0.0800, !- Rated Latent Heat Ratio
|
|
0.8500, !- Rated Runtime Fraction
|
|
8.9300, !- Case Length {m}
|
|
2.0000, !- Case Operating Temperature {C}
|
|
CaseTemperatureMethod, !- Latent Case Credit Curve Type
|
|
Kitchen_Flr_5_Case:2_SELFCONTAINEDDISPLAYCASEMultiShelfVertical_LatentEnergyMult, !- Latent Case Credit Curve Name
|
|
67.0000, !- Standard Case Fan Power per Unit Length {W/m}
|
|
67.0000, !- Operating Case Fan Power per Unit Length {W/m}
|
|
40.0000, !- Standard Case Lighting Power per Unit Length {W/m}
|
|
, !- Installed Case Lighting Power per Unit Length {W/m}
|
|
BLDG_LIGHT_SCH, !- Case Lighting Schedule Name
|
|
1.0000, !- Fraction of Lighting Energy to Case
|
|
0.0000, !- Case Anti-Sweat Heater Power per Unit Length {W/m}
|
|
0.0000, !- Minimum Anti-Sweat Heater Power per Unit Length {W/m}
|
|
None, !- Anti-Sweat Heater Control Type
|
|
0.0, !- Humidity at Zero Anti-Sweat Heater Energy {percent}
|
|
0.0, !- Case Height {m}
|
|
0.2000, !- Fraction of Anti-Sweat Heater Energy to Case
|
|
0.0000, !- Case Defrost Power per Unit Length {W/m}
|
|
NONE, !- Case Defrost Type
|
|
, !- Case Defrost Schedule Name
|
|
, !- Case Defrost Drip-Down Schedule Name
|
|
None, !- Defrost Energy Correction Curve Type
|
|
, !- Defrost Energy Correction Curve Name
|
|
0.0000, !- Under Case HVAC Return Air Fraction
|
|
Kitchen_Flr_5_Case:2_SELFCONTAINEDDISPLAYCASE_CaseStockingSched; !- Refrigerated Case Restocking Schedule Name
|
|
|
|
Refrigeration:CompressorRack,
|
|
RACK1, !- Name
|
|
OUTDOORS, !- Heat Rejection Location
|
|
1.5000, !- Design Compressor Rack COP {W/W}
|
|
RACK1_RackCOPfTCurve, !- Compressor Rack COP Function of Temperature Curve Name
|
|
1000.0000, !- Design Condenser Fan Power {W}
|
|
RACK1_RackCondFanCurve2, !- Condenser Fan Power Function of Temperature Curve Name
|
|
AIRCOOLED, !- Condenser Type
|
|
, !- Water-Cooled Condenser Inlet Node Name
|
|
, !- Water-Cooled Condenser Outlet Node Name
|
|
, !- Water-Cooled Loop Flow Type
|
|
, !- Water-Cooled Condenser Outlet Temperature Schedule Name
|
|
, !- Water-Cooled Condenser Design Flow Rate {m3/s}
|
|
, !- Water-Cooled Condenser Maximum Flow Rate {m3/s}
|
|
, !- Water-Cooled Condenser Maximum Water Outlet Temperature {C}
|
|
, !- Water-Cooled Condenser Minimum Water Inlet Temperature {C}
|
|
, !- Evaporative Condenser Availability Schedule Name
|
|
, !- Evaporative Condenser Effectiveness {dimensionless}
|
|
, !- Evaporative Condenser Air Flow Rate {m3/s}
|
|
, !- Basin Heater Capacity {W/K}
|
|
, !- Basin Heater Setpoint Temperature {C}
|
|
, !- Design Evaporative Condenser Water Pump Power {W}
|
|
, !- Evaporative Water Supply Tank Name
|
|
RACK1_condenserInlet, !- Condenser Air Inlet Node Name
|
|
Low Temp Refrigeration, !- End-Use Subcategory
|
|
Kitchen_Flr_5_Case:1_WALKINFREEZER; !- Refrigeration Case Name or WalkIn Name or CaseAndWalkInList Name
|
|
|
|
Refrigeration:CompressorRack,
|
|
RACK2, !- Name
|
|
OUTDOORS, !- Heat Rejection Location
|
|
3.0000, !- Design Compressor Rack COP {W/W}
|
|
RACK2_RackCOPfTCurve, !- Compressor Rack COP Function of Temperature Curve Name
|
|
1000.0000, !- Design Condenser Fan Power {W}
|
|
, !- Condenser Fan Power Function of Temperature Curve Name
|
|
AIRCOOLED, !- Condenser Type
|
|
, !- Water-Cooled Condenser Inlet Node Name
|
|
, !- Water-Cooled Condenser Outlet Node Name
|
|
, !- Water-Cooled Loop Flow Type
|
|
, !- Water-Cooled Condenser Outlet Temperature Schedule Name
|
|
, !- Water-Cooled Condenser Design Flow Rate {m3/s}
|
|
, !- Water-Cooled Condenser Maximum Flow Rate {m3/s}
|
|
, !- Water-Cooled Condenser Maximum Water Outlet Temperature {C}
|
|
, !- Water-Cooled Condenser Minimum Water Inlet Temperature {C}
|
|
, !- Evaporative Condenser Availability Schedule Name
|
|
, !- Evaporative Condenser Effectiveness {dimensionless}
|
|
, !- Evaporative Condenser Air Flow Rate {m3/s}
|
|
, !- Basin Heater Capacity {W/K}
|
|
, !- Basin Heater Setpoint Temperature {C}
|
|
, !- Design Evaporative Condenser Water Pump Power {W}
|
|
, !- Evaporative Water Supply Tank Name
|
|
RACK2_condenserInlet, !- Condenser Air Inlet Node Name
|
|
Med Temp Refrigeration, !- End-Use Subcategory
|
|
Kitchen_Flr_5_Case:2_SELFCONTAINEDDISPLAYCASE; !- Refrigeration Case Name or WalkIn Name or CaseAndWalkInList Name
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_5_Case:1_WALKINFREEZER_CaseCreditReduxSched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Interpolate:No, !- Field 3
|
|
Until: 7:00,0.2, !- Field 4
|
|
Until: 21:00,0.4, !- Field 6
|
|
Until: 24:00,0.2; !- Field 8
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_5_Case:1_WALKINFREEZER_CaseDefrost2aDaySched, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Interpolate:Average, !- Field 3
|
|
Until: 11:00,0, !- Field 4
|
|
Until: 11:20,1, !- Field 6
|
|
Until: 23:00,0, !- Field 8
|
|
Until: 23:20,1, !- Field 10
|
|
Until: 24:00,0; !- Field 12
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_5_Case:1_WALKINFREEZER_CaseDripDown2aDaySched, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Interpolate:Average, !- Field 3
|
|
Until: 11:00,0, !- Field 4
|
|
Until: 11:30,1, !- Field 6
|
|
Until: 23:00,0, !- Field 8
|
|
Until: 23:30,1, !- Field 10
|
|
Until: 24:00,0; !- Field 12
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_5_Case:1_WALKINFREEZER_WalkInStockingSched, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Tuesday Friday, !- Field 2
|
|
Until: 4:00,0.0, !- Field 3
|
|
Until: 5:00,725.0, !- Field 5
|
|
Until: 6:00,417.0, !- Field 7
|
|
Until: 7:00,290.0, !- Field 9
|
|
Until: 24:00,0.0, !- Field 11
|
|
For: AllOtherDays, !- Field 13
|
|
Until: 4:00,0.0, !- Field 14
|
|
Until: 5:00,125.0, !- Field 16
|
|
Until: 6:00,117.0, !- Field 18
|
|
Until: 7:00,90.0, !- Field 20
|
|
Until: 19:00,0.0, !- Field 22
|
|
Until: 20:00,125.0, !- Field 24
|
|
Until: 21:00,117.0, !- Field 26
|
|
Until: 22:00,90.0, !- Field 28
|
|
Until: 24:00,0.0; !- Field 30
|
|
|
|
Schedule:Compact,
|
|
Kitchen_Flr_5_Case:2_SELFCONTAINEDDISPLAYCASE_CaseStockingSched, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For:AllDays, !- Field 2
|
|
Until: 6:00,0.0, !- Field 3
|
|
Until: 7:00,50.0, !- Field 5
|
|
Until: 9:00,70.0, !- Field 7
|
|
Until: 10:00,80.0, !- Field 9
|
|
Until: 11:00,70.0, !- Field 11
|
|
Until: 13:00,50.0, !- Field 13
|
|
Until: 14:00,80.0, !- Field 15
|
|
Until: 15:00,90.0, !- Field 17
|
|
Until: 16:00,80.0, !- Field 19
|
|
Until: 24:00,0.0; !- Field 21
|
|
|
|
! ***SWH EQUIPMENT***
|
|
|
|
Pump:VariableSpeed,
|
|
SWHSys1 Pump, !- Name
|
|
SWHSys1 Supply Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNodeviaConnector, !- Outlet Node Name
|
|
AUTOSIZE, !- Design Maximum Flow Rate {m3/s}
|
|
179352, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.9, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
0, !- Coefficient 1 of the Part Load Performance Curve
|
|
1, !- Coefficient 2 of the Part Load Performance Curve
|
|
0, !- Coefficient 3 of the Part Load Performance Curve
|
|
0, !- Coefficient 4 of the Part Load Performance Curve
|
|
0.0, !- Design Minimum Flow Rate {m3/s}
|
|
Intermittent; !- Pump Control Type
|
|
|
|
WaterHeater:Mixed,
|
|
SWHSys1 Water Heater, !- Name
|
|
3.0, !- Tank Volume {m3}
|
|
SWHSys1 Water Heater Setpoint Temperature Schedule Name, !- Setpoint Temperature Schedule Name
|
|
2.0, !- Deadband Temperature Difference {deltaC}
|
|
82.2222, !- Maximum Temperature Limit {C}
|
|
Cycle, !- Heater Control Type
|
|
845000, !- Heater Maximum Capacity {W}
|
|
, !- Heater Minimum Capacity {W}
|
|
, !- Heater Ignition Minimum Flow Rate {m3/s}
|
|
, !- Heater Ignition Delay {s}
|
|
NATURALGAS, !- Heater Fuel Type
|
|
0.8, !- Heater Thermal Efficiency
|
|
, !- Part Load Factor Curve Name
|
|
20, !- Off Cycle Parasitic Fuel Consumption Rate {W}
|
|
NATURALGAS, !- Off Cycle Parasitic Fuel Type
|
|
0.8, !- Off Cycle Parasitic Heat Fraction to Tank
|
|
, !- On Cycle Parasitic Fuel Consumption Rate {W}
|
|
NATURALGAS, !- On Cycle Parasitic Fuel Type
|
|
, !- On Cycle Parasitic Heat Fraction to Tank
|
|
SCHEDULE, !- Ambient Temperature Indicator
|
|
SWHSys1 Water Heater Ambient Temperature Schedule Name, !- Ambient Temperature Schedule Name
|
|
, !- Ambient Temperature Zone Name
|
|
, !- Ambient Temperature Outdoor Air Node Name
|
|
6.0, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- Off Cycle Loss Fraction to Zone
|
|
6.0, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- On Cycle Loss Fraction to Zone
|
|
, !- Peak Use Flow Rate {m3/s}
|
|
, !- Use Flow Rate Fraction Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNode, !- Use Side Inlet Node Name
|
|
SWHSys1 Supply Equipment Outlet Node, !- Use Side Outlet Node Name
|
|
1.0, !- Use Side Effectiveness
|
|
, !- Source Side Inlet Node Name
|
|
, !- Source Side Outlet Node Name
|
|
1.0, !- Source Side Effectiveness
|
|
AUTOSIZE, !- Use Side Design Flow Rate {m3/s}
|
|
AUTOSIZE, !- Source Side Design Flow Rate {m3/s}
|
|
1.5; !- Indirect Water Heating Recovery Time {hr}
|
|
|
|
WaterUse:Equipment,
|
|
ER_Exam1_Mult4_Flr_1 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
ER_Exam1_Mult4_Flr_1, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
ER_Exam3_Mult4_Flr_1 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
ER_Exam3_Mult4_Flr_1, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
ER_Trauma1_Flr_1 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
ER_Trauma1_Flr_1, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
ER_Trauma2_Flr_1 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
ER_Trauma2_Flr_1, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
ER_Triage_Mult4_Flr_1 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
ER_Triage_Mult4_Flr_1, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Kitchen_Flr_5 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
0.0001577, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Kitchen_Flr_5, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Lab_Flr_3 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
2.1111e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Lab_Flr_3, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Lab_Flr_4 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
2.1111e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Lab_Flr_4, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
OR1_Flr_2 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
2.1111e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
OR1_Flr_2, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
OR2_Mult5_Flr_2 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
2.1111e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
OR2_Mult5_Flr_2, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
OR3_Flr_2 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
2.1111e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
OR3_Flr_2, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
OR4_Flr_2 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
2.1111e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
OR4_Flr_2, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom1_Mult10_Flr_3 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom1_Mult10_Flr_3, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom1_Mult10_Flr_4 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom1_Mult10_Flr_4, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom2_Flr_3 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom2_Flr_3, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom2_Flr_4 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom2_Flr_4, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom3_Mult10_Flr_3 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom3_Mult10_Flr_3, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom3_Mult10_Flr_4 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom3_Mult10_Flr_4, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom4_Flr_3 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom4_Flr_3, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom4_Flr_4 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom4_Flr_4, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom5_Mult10_Flr_3 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom5_Mult10_Flr_3, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom5_Mult10_Flr_4 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom5_Mult10_Flr_4, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom6_Flr_3 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom6_Flr_3, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom6_Flr_4 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom6_Flr_4, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom7_Mult10_Flr_3 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom7_Mult10_Flr_3, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom7_Mult10_Flr_4 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom7_Mult10_Flr_4, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom8_Flr_3 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom8_Flr_3, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PatRoom8_Flr_4 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PatRoom8_Flr_4, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
PhysTherapy_Flr_3 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
PhysTherapy_Flr_3, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Radiology_Flr_4 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.0556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_EXTD_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Radiology_Flr_4, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
PlantEquipmentList,
|
|
SWHSys1 Equipment List, !- Name
|
|
WaterHeater:Mixed, !- Equipment 1 Object Type
|
|
SWHSys1 Water Heater; !- Equipment 1 Name
|
|
|
|
! ***SWH SIZING & CONTROLS***
|
|
|
|
Sizing:Plant,
|
|
SWHSys1, !- Plant or Condenser Loop Name
|
|
Heating, !- Loop Type
|
|
60, !- Design Loop Exit Temperature {C}
|
|
5.0; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
SetpointManager:Scheduled,
|
|
SWHSys1 Loop Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
SWHSys1-Loop-Temp-Schedule, !- Schedule Name
|
|
SWHSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
PlantEquipmentOperationSchemes,
|
|
SWHSys1 Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type
|
|
SWHSys1 Operation Scheme,!- Control Scheme 1 Name
|
|
PlantOnSched; !- Control Scheme 1 Schedule Name
|
|
|
|
PlantEquipmentOperation:HeatingLoad,
|
|
SWHSys1 Operation Scheme,!- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
1000000000000000, !- Load Range 1 Upper Limit {W}
|
|
SWHSys1 Equipment List; !- Range 1 Equipment List Name
|
|
|
|
! ***SWH LOOP***
|
|
|
|
PlantLoop,
|
|
SWHSys1, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
SWHSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
|
|
SWHSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
|
|
60.0, !- Maximum Loop Temperature {C}
|
|
10.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Plant Loop Volume {m3}
|
|
SWHSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
|
|
SWHSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
|
|
SWHSys1 Supply Branches, !- Plant Side Branch List Name
|
|
SWHSys1 Supply Connectors, !- Plant Side Connector List Name
|
|
SWHSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
SWHSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
SWHSys1 Demand Branches, !- Demand Side Branch List Name
|
|
SWHSys1 Demand Connectors, !- Demand Side Connector List Name
|
|
Optimal; !- Load Distribution Scheme
|
|
|
|
! ***SWH CONNECTIONS***
|
|
|
|
BranchList,
|
|
SWHSys1 Demand Branches, !- Name
|
|
SWHSys1 Demand Inlet Branch, !- Branch 1 Name
|
|
SWHSys1 Demand Load Branch 1, !- Branch 2 Name
|
|
SWHSys1 Demand Load Branch 2, !- Branch 3 Name
|
|
SWHSys1 Demand Load Branch 3, !- Branch 4 Name
|
|
SWHSys1 Demand Load Branch 4, !- Branch 5 Name
|
|
SWHSys1 Demand Load Branch 5, !- Branch 6 Name
|
|
SWHSys1 Demand Load Branch 6, !- Branch 7 Name
|
|
SWHSys1 Demand Load Branch 7, !- Branch 8 Name
|
|
SWHSys1 Demand Load Branch 8, !- Branch 9 Name
|
|
SWHSys1 Demand Load Branch 9, !- Branch 10 Name
|
|
SWHSys1 Demand Load Branch 10, !- Branch 11 Name
|
|
SWHSys1 Demand Load Branch 11, !- Branch 12 Name
|
|
SWHSys1 Demand Load Branch 12, !- Branch 13 Name
|
|
SWHSys1 Demand Load Branch 13, !- Branch 14 Name
|
|
SWHSys1 Demand Load Branch 14, !- Branch 15 Name
|
|
SWHSys1 Demand Load Branch 15, !- Branch 16 Name
|
|
SWHSys1 Demand Load Branch 16, !- Branch 17 Name
|
|
SWHSys1 Demand Load Branch 17, !- Branch 18 Name
|
|
SWHSys1 Demand Load Branch 18, !- Branch 19 Name
|
|
SWHSys1 Demand Load Branch 19, !- Branch 20 Name
|
|
SWHSys1 Demand Load Branch 20, !- Branch 21 Name
|
|
SWHSys1 Demand Load Branch 21, !- Branch 22 Name
|
|
SWHSys1 Demand Load Branch 22, !- Branch 23 Name
|
|
SWHSys1 Demand Load Branch 23, !- Branch 24 Name
|
|
SWHSys1 Demand Load Branch 24, !- Branch 25 Name
|
|
SWHSys1 Demand Load Branch 25, !- Branch 26 Name
|
|
SWHSys1 Demand Load Branch 26, !- Branch 27 Name
|
|
SWHSys1 Demand Load Branch 27, !- Branch 28 Name
|
|
SWHSys1 Demand Load Branch 28, !- Branch 29 Name
|
|
SWHSys1 Demand Load Branch 29, !- Branch 30 Name
|
|
SWHSys1 Demand Load Branch 30, !- Branch 31 Name
|
|
SWHSys1 Demand Bypass Branch, !- Branch 32 Name
|
|
SWHSys1 Demand Outlet Branch; !- Branch 33 Name
|
|
|
|
BranchList,
|
|
SWHSys1 Supply Branches, !- Name
|
|
SWHSys1 Supply Inlet Branch, !- Branch 1 Name
|
|
SWHSys1 Supply Equipment Branch, !- Branch 2 Name
|
|
SWHSys1 Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
SWHSys1 Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Demand Bypass Pipe, !- Component 1 Name
|
|
SWHSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Demand Inlet Pipe, !- Component 1 Name
|
|
SWHSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Demand Inlet Pipe-SWHSys1 Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
ER_Exam1_Mult4_Flr_1 Water Equipment, !- Component 1 Name
|
|
ER_Exam1_Mult4_Flr_1 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
ER_Exam1_Mult4_Flr_1 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 10, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom1_Mult10_Flr_3 Water Equipment, !- Component 1 Name
|
|
PatRoom1_Mult10_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom1_Mult10_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 11, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom2_Flr_3 Water Equipment, !- Component 1 Name
|
|
PatRoom2_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom2_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 12, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom3_Mult10_Flr_3 Water Equipment, !- Component 1 Name
|
|
PatRoom3_Mult10_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom3_Mult10_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 13, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom4_Flr_3 Water Equipment, !- Component 1 Name
|
|
PatRoom4_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom4_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 14, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom5_Mult10_Flr_3 Water Equipment, !- Component 1 Name
|
|
PatRoom5_Mult10_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom5_Mult10_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 15, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PhysTherapy_Flr_3 Water Equipment, !- Component 1 Name
|
|
PhysTherapy_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PhysTherapy_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 16, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom6_Flr_3 Water Equipment, !- Component 1 Name
|
|
PatRoom6_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom6_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 17, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom7_Mult10_Flr_3 Water Equipment, !- Component 1 Name
|
|
PatRoom7_Mult10_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom7_Mult10_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 18, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom8_Flr_3 Water Equipment, !- Component 1 Name
|
|
PatRoom8_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom8_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 19, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Lab_Flr_3 Water Equipment, !- Component 1 Name
|
|
Lab_Flr_3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Lab_Flr_3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
ER_Trauma1_Flr_1 Water Equipment, !- Component 1 Name
|
|
ER_Trauma1_Flr_1 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
ER_Trauma1_Flr_1 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 20, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom1_Mult10_Flr_4 Water Equipment, !- Component 1 Name
|
|
PatRoom1_Mult10_Flr_4 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom1_Mult10_Flr_4 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 21, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom2_Flr_4 Water Equipment, !- Component 1 Name
|
|
PatRoom2_Flr_4 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom2_Flr_4 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 22, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom3_Mult10_Flr_4 Water Equipment, !- Component 1 Name
|
|
PatRoom3_Mult10_Flr_4 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom3_Mult10_Flr_4 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 23, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom4_Flr_4 Water Equipment, !- Component 1 Name
|
|
PatRoom4_Flr_4 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom4_Flr_4 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 24, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom5_Mult10_Flr_4 Water Equipment, !- Component 1 Name
|
|
PatRoom5_Mult10_Flr_4 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom5_Mult10_Flr_4 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 25, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Radiology_Flr_4 Water Equipment, !- Component 1 Name
|
|
Radiology_Flr_4 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Radiology_Flr_4 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 26, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom6_Flr_4 Water Equipment, !- Component 1 Name
|
|
PatRoom6_Flr_4 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom6_Flr_4 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 27, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom7_Mult10_Flr_4 Water Equipment, !- Component 1 Name
|
|
PatRoom7_Mult10_Flr_4 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom7_Mult10_Flr_4 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 28, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
PatRoom8_Flr_4 Water Equipment, !- Component 1 Name
|
|
PatRoom8_Flr_4 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
PatRoom8_Flr_4 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 29, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Lab_Flr_4 Water Equipment, !- Component 1 Name
|
|
Lab_Flr_4 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Lab_Flr_4 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 3, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
ER_Exam3_Mult4_Flr_1 Water Equipment, !- Component 1 Name
|
|
ER_Exam3_Mult4_Flr_1 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
ER_Exam3_Mult4_Flr_1 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 30, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Kitchen_Flr_5 Water Equipment, !- Component 1 Name
|
|
Kitchen_Flr_5 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Kitchen_Flr_5 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 4, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
ER_Trauma2_Flr_1 Water Equipment, !- Component 1 Name
|
|
ER_Trauma2_Flr_1 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
ER_Trauma2_Flr_1 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 5, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
ER_Triage_Mult4_Flr_1 Water Equipment, !- Component 1 Name
|
|
ER_Triage_Mult4_Flr_1 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
ER_Triage_Mult4_Flr_1 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 6, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
OR1_Flr_2 Water Equipment, !- Component 1 Name
|
|
OR1_Flr_2 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
OR1_Flr_2 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 7, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
OR2_Mult5_Flr_2 Water Equipment, !- Component 1 Name
|
|
OR2_Mult5_Flr_2 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
OR2_Mult5_Flr_2 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 8, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
OR3_Flr_2 Water Equipment, !- Component 1 Name
|
|
OR3_Flr_2 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
OR3_Flr_2 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 9, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
OR4_Flr_2 Water Equipment, !- Component 1 Name
|
|
OR4_Flr_2 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
OR4_Flr_2 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Demand Outlet Pipe, !- Component 1 Name
|
|
SWHSys1 Demand Mixer-SWHSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
SWHSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterHeater:Mixed, !- Component 1 Object Type
|
|
SWHSys1 Water Heater, !- Component 1 Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNode, !- Component 1 Inlet Node Name
|
|
SWHSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
SWHSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:VariableSpeed, !- Component 1 Object Type
|
|
SWHSys1 Pump, !- Component 1 Name
|
|
SWHSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Supply Outlet Pipe, !- Component 1 Name
|
|
SWHSys1 Supply Mixer-SWHSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
SWHSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
ConnectorList,
|
|
SWHSys1 Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
SWHSys1 Demand Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
SWHSys1 Demand Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
SWHSys1 Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
SWHSys1 Supply Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
SWHSys1 Supply Mixer; !- Connector 2 Name
|
|
|
|
WaterUse:Connections,
|
|
ER_Exam1_Mult4_Flr_1 Water Equipment, !- Name
|
|
ER_Exam1_Mult4_Flr_1 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
ER_Exam1_Mult4_Flr_1 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
ER_Exam1_Mult4_Flr_1 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
ER_Exam3_Mult4_Flr_1 Water Equipment, !- Name
|
|
ER_Exam3_Mult4_Flr_1 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
ER_Exam3_Mult4_Flr_1 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
ER_Exam3_Mult4_Flr_1 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
ER_Trauma1_Flr_1 Water Equipment, !- Name
|
|
ER_Trauma1_Flr_1 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
ER_Trauma1_Flr_1 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
ER_Trauma1_Flr_1 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
ER_Trauma2_Flr_1 Water Equipment, !- Name
|
|
ER_Trauma2_Flr_1 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
ER_Trauma2_Flr_1 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
ER_Trauma2_Flr_1 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
ER_Triage_Mult4_Flr_1 Water Equipment, !- Name
|
|
ER_Triage_Mult4_Flr_1 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
ER_Triage_Mult4_Flr_1 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
ER_Triage_Mult4_Flr_1 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Kitchen_Flr_5 Water Equipment, !- Name
|
|
Kitchen_Flr_5 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Kitchen_Flr_5 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Kitchen_Flr_5 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Lab_Flr_3 Water Equipment, !- Name
|
|
Lab_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Lab_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Lab_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Lab_Flr_4 Water Equipment, !- Name
|
|
Lab_Flr_4 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Lab_Flr_4 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Lab_Flr_4 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
OR1_Flr_2 Water Equipment, !- Name
|
|
OR1_Flr_2 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
OR1_Flr_2 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
OR1_Flr_2 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
OR2_Mult5_Flr_2 Water Equipment, !- Name
|
|
OR2_Mult5_Flr_2 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
OR2_Mult5_Flr_2 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
OR2_Mult5_Flr_2 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
OR3_Flr_2 Water Equipment, !- Name
|
|
OR3_Flr_2 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
OR3_Flr_2 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
OR3_Flr_2 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
OR4_Flr_2 Water Equipment, !- Name
|
|
OR4_Flr_2 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
OR4_Flr_2 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
OR4_Flr_2 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom1_Mult10_Flr_3 Water Equipment, !- Name
|
|
PatRoom1_Mult10_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom1_Mult10_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom1_Mult10_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom1_Mult10_Flr_4 Water Equipment, !- Name
|
|
PatRoom1_Mult10_Flr_4 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom1_Mult10_Flr_4 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom1_Mult10_Flr_4 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom2_Flr_3 Water Equipment, !- Name
|
|
PatRoom2_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom2_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom2_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom2_Flr_4 Water Equipment, !- Name
|
|
PatRoom2_Flr_4 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom2_Flr_4 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom2_Flr_4 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom3_Mult10_Flr_3 Water Equipment, !- Name
|
|
PatRoom3_Mult10_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom3_Mult10_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom3_Mult10_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom3_Mult10_Flr_4 Water Equipment, !- Name
|
|
PatRoom3_Mult10_Flr_4 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom3_Mult10_Flr_4 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom3_Mult10_Flr_4 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom4_Flr_3 Water Equipment, !- Name
|
|
PatRoom4_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom4_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom4_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom4_Flr_4 Water Equipment, !- Name
|
|
PatRoom4_Flr_4 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom4_Flr_4 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom4_Flr_4 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom5_Mult10_Flr_3 Water Equipment, !- Name
|
|
PatRoom5_Mult10_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom5_Mult10_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom5_Mult10_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom5_Mult10_Flr_4 Water Equipment, !- Name
|
|
PatRoom5_Mult10_Flr_4 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom5_Mult10_Flr_4 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom5_Mult10_Flr_4 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom6_Flr_3 Water Equipment, !- Name
|
|
PatRoom6_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom6_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom6_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom6_Flr_4 Water Equipment, !- Name
|
|
PatRoom6_Flr_4 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom6_Flr_4 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom6_Flr_4 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom7_Mult10_Flr_3 Water Equipment, !- Name
|
|
PatRoom7_Mult10_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom7_Mult10_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom7_Mult10_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom7_Mult10_Flr_4 Water Equipment, !- Name
|
|
PatRoom7_Mult10_Flr_4 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom7_Mult10_Flr_4 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom7_Mult10_Flr_4 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom8_Flr_3 Water Equipment, !- Name
|
|
PatRoom8_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom8_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom8_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PatRoom8_Flr_4 Water Equipment, !- Name
|
|
PatRoom8_Flr_4 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PatRoom8_Flr_4 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PatRoom8_Flr_4 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
PhysTherapy_Flr_3 Water Equipment, !- Name
|
|
PhysTherapy_Flr_3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
PhysTherapy_Flr_3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
PhysTherapy_Flr_3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Radiology_Flr_4 Water Equipment, !- Name
|
|
Radiology_Flr_4 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Radiology_Flr_4 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Radiology_Flr_4 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
Connector:Splitter,
|
|
SWHSys1 Demand Splitter, !- Name
|
|
SWHSys1 Demand Inlet Branch, !- Inlet Branch Name
|
|
SWHSys1 Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
SWHSys1 Demand Load Branch 2, !- Outlet Branch 2 Name
|
|
SWHSys1 Demand Load Branch 3, !- Outlet Branch 3 Name
|
|
SWHSys1 Demand Load Branch 4, !- Outlet Branch 4 Name
|
|
SWHSys1 Demand Load Branch 5, !- Outlet Branch 5 Name
|
|
SWHSys1 Demand Load Branch 6, !- Outlet Branch 6 Name
|
|
SWHSys1 Demand Load Branch 7, !- Outlet Branch 7 Name
|
|
SWHSys1 Demand Load Branch 8, !- Outlet Branch 8 Name
|
|
SWHSys1 Demand Load Branch 9, !- Outlet Branch 9 Name
|
|
SWHSys1 Demand Load Branch 10, !- Outlet Branch 10 Name
|
|
SWHSys1 Demand Load Branch 11, !- Outlet Branch 11 Name
|
|
SWHSys1 Demand Load Branch 12, !- Outlet Branch 12 Name
|
|
SWHSys1 Demand Load Branch 13, !- Outlet Branch 13 Name
|
|
SWHSys1 Demand Load Branch 14, !- Outlet Branch 14 Name
|
|
SWHSys1 Demand Load Branch 15, !- Outlet Branch 15 Name
|
|
SWHSys1 Demand Load Branch 16, !- Outlet Branch 16 Name
|
|
SWHSys1 Demand Load Branch 17, !- Outlet Branch 17 Name
|
|
SWHSys1 Demand Load Branch 18, !- Outlet Branch 18 Name
|
|
SWHSys1 Demand Load Branch 19, !- Outlet Branch 19 Name
|
|
SWHSys1 Demand Load Branch 20, !- Outlet Branch 20 Name
|
|
SWHSys1 Demand Load Branch 21, !- Outlet Branch 21 Name
|
|
SWHSys1 Demand Load Branch 22, !- Outlet Branch 22 Name
|
|
SWHSys1 Demand Load Branch 23, !- Outlet Branch 23 Name
|
|
SWHSys1 Demand Load Branch 24, !- Outlet Branch 24 Name
|
|
SWHSys1 Demand Load Branch 25, !- Outlet Branch 25 Name
|
|
SWHSys1 Demand Load Branch 26, !- Outlet Branch 26 Name
|
|
SWHSys1 Demand Load Branch 27, !- Outlet Branch 27 Name
|
|
SWHSys1 Demand Load Branch 28, !- Outlet Branch 28 Name
|
|
SWHSys1 Demand Load Branch 29, !- Outlet Branch 29 Name
|
|
SWHSys1 Demand Load Branch 30, !- Outlet Branch 30 Name
|
|
SWHSys1 Demand Bypass Branch; !- Outlet Branch 31 Name
|
|
|
|
Connector:Splitter,
|
|
SWHSys1 Supply Splitter, !- Name
|
|
SWHSys1 Supply Inlet Branch, !- Inlet Branch Name
|
|
SWHSys1 Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
SWHSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
SWHSys1 Demand Mixer, !- Name
|
|
SWHSys1 Demand Outlet Branch, !- Outlet Branch Name
|
|
SWHSys1 Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
SWHSys1 Demand Load Branch 2, !- Inlet Branch 2 Name
|
|
SWHSys1 Demand Load Branch 3, !- Inlet Branch 3 Name
|
|
SWHSys1 Demand Load Branch 4, !- Inlet Branch 4 Name
|
|
SWHSys1 Demand Load Branch 5, !- Inlet Branch 5 Name
|
|
SWHSys1 Demand Load Branch 6, !- Inlet Branch 6 Name
|
|
SWHSys1 Demand Load Branch 7, !- Inlet Branch 7 Name
|
|
SWHSys1 Demand Load Branch 8, !- Inlet Branch 8 Name
|
|
SWHSys1 Demand Load Branch 9, !- Inlet Branch 9 Name
|
|
SWHSys1 Demand Load Branch 10, !- Inlet Branch 10 Name
|
|
SWHSys1 Demand Load Branch 11, !- Inlet Branch 11 Name
|
|
SWHSys1 Demand Load Branch 12, !- Inlet Branch 12 Name
|
|
SWHSys1 Demand Load Branch 13, !- Inlet Branch 13 Name
|
|
SWHSys1 Demand Load Branch 14, !- Inlet Branch 14 Name
|
|
SWHSys1 Demand Load Branch 15, !- Inlet Branch 15 Name
|
|
SWHSys1 Demand Load Branch 16, !- Inlet Branch 16 Name
|
|
SWHSys1 Demand Load Branch 17, !- Inlet Branch 17 Name
|
|
SWHSys1 Demand Load Branch 18, !- Inlet Branch 18 Name
|
|
SWHSys1 Demand Load Branch 19, !- Inlet Branch 19 Name
|
|
SWHSys1 Demand Load Branch 20, !- Inlet Branch 20 Name
|
|
SWHSys1 Demand Load Branch 21, !- Inlet Branch 21 Name
|
|
SWHSys1 Demand Load Branch 22, !- Inlet Branch 22 Name
|
|
SWHSys1 Demand Load Branch 23, !- Inlet Branch 23 Name
|
|
SWHSys1 Demand Load Branch 24, !- Inlet Branch 24 Name
|
|
SWHSys1 Demand Load Branch 25, !- Inlet Branch 25 Name
|
|
SWHSys1 Demand Load Branch 26, !- Inlet Branch 26 Name
|
|
SWHSys1 Demand Load Branch 27, !- Inlet Branch 27 Name
|
|
SWHSys1 Demand Load Branch 28, !- Inlet Branch 28 Name
|
|
SWHSys1 Demand Load Branch 29, !- Inlet Branch 29 Name
|
|
SWHSys1 Demand Load Branch 30, !- Inlet Branch 30 Name
|
|
SWHSys1 Demand Bypass Branch; !- Inlet Branch 31 Name
|
|
|
|
Connector:Mixer,
|
|
SWHSys1 Supply Mixer, !- Name
|
|
SWHSys1 Supply Outlet Branch, !- Outlet Branch Name
|
|
SWHSys1 Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
SWHSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Demand Bypass Pipe, !- Name
|
|
SWHSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Demand Inlet Pipe, !- Name
|
|
SWHSys1 Demand Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Demand Inlet Pipe-SWHSys1 Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Demand Outlet Pipe, !- Name
|
|
SWHSys1 Demand Mixer-SWHSys1 Demand Outlet Pipe, !- Inlet Node Name
|
|
SWHSys1 Demand Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Supply Equipment Bypass Pipe, !- Name
|
|
SWHSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Supply Outlet Pipe, !- Name
|
|
SWHSys1 Supply Mixer-SWHSys1 Supply Outlet Pipe, !- Inlet Node Name
|
|
SWHSys1 Supply Outlet Node; !- Outlet Node Name
|
|
|
|
! ***SWH SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
BLDG_SWH_EXTD_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 07:00,0.3, !- Field 3
|
|
Until: 08:00,0.5, !- Field 5
|
|
Until: 09:00,0.58, !- Field 7
|
|
Until: 10:00,0.66, !- Field 9
|
|
Until: 11:00,0.78, !- Field 11
|
|
Until: 12:00,0.82, !- Field 13
|
|
Until: 13:00,0.71, !- Field 15
|
|
Until: 14:00,0.82, !- Field 17
|
|
Until: 15:00,0.78, !- Field 19
|
|
Until: 16:00,0.74, !- Field 21
|
|
Until: 17:00,0.63, !- Field 23
|
|
Until: 18:00,0.41, !- Field 25
|
|
Until: 21:00,0.35, !- Field 27
|
|
Until: 24:00,0.30, !- Field 29
|
|
For: AllOtherDays, !- Field 31
|
|
Until: 08:00,0.3, !- Field 32
|
|
Until: 09:00,0.4, !- Field 34
|
|
Until: 10:00,0.5, !- Field 36
|
|
Until: 17:00,0.6, !- Field 38
|
|
Until: 18:00,0.5, !- Field 40
|
|
Until: 24:00,0.3; !- Field 42
|
|
|
|
Schedule:Compact,
|
|
BLDG_SWH_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 07:00,0.01, !- Field 3
|
|
Until: 08:00,0.17, !- Field 5
|
|
Until: 09:00,0.58, !- Field 7
|
|
Until: 10:00,0.66, !- Field 9
|
|
Until: 11:00,0.78, !- Field 11
|
|
Until: 12:00,0.82, !- Field 13
|
|
Until: 13:00,0.71, !- Field 15
|
|
Until: 14:00,0.82, !- Field 17
|
|
Until: 15:00,0.78, !- Field 19
|
|
Until: 16:00,0.74, !- Field 21
|
|
Until: 17:00,0.63, !- Field 23
|
|
Until: 18:00,0.41, !- Field 25
|
|
Until: 21:00,0.18, !- Field 27
|
|
Until: 22:00,0.1, !- Field 29
|
|
Until: 24:00,0.01, !- Field 31
|
|
For: Saturday WinterDesignDay, !- Field 33
|
|
Until: 08:00,0.01, !- Field 34
|
|
Until: 09:00,0.2, !- Field 36
|
|
Until: 10:00,0.28, !- Field 38
|
|
Until: 12:00,0.3, !- Field 40
|
|
Until: 14:00,0.24, !- Field 42
|
|
Until: 17:00,0.23, !- Field 44
|
|
Until: 18:00,0.1, !- Field 46
|
|
Until: 24:00,0.01, !- Field 48
|
|
For: Sunday Holidays AllOtherDays, !- Field 50
|
|
Until: 24:00,0.01; !- Field 51
|
|
|
|
Schedule:Compact,
|
|
Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,49.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,49.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
SWHSys1 Water Heater Ambient Temperature Schedule Name, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,22.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
SWHSys1 Water Heater Setpoint Temperature Schedule Name, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
SWHSys1-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
! ***ECONOMICS***
|
|
! IN_EIAMonthlyRateGas, Source EIA historical Nov2003 thru Oct2004
|
|
! Indiana 1999 state average electricity emissions factors based on eGRID, 1065, AirData
|
|
! PSI_CS_CommercialElectricService, source http://www.cinergypsi.com/pdfs/RateCS.pdf, effective 2004-05-24
|
|
! PSI_LLF_LowLoadFactorService,source http://www.cinergypsi.com/pdfs/RATELLF.pdf, effective 2004-05-24
|
|
|
|
UtilityCost:Tariff,
|
|
PSI_LLF_LowLoadFactorService, !- Name
|
|
Electricity:Facility, !- Output Meter Name
|
|
kWh, !- Conversion Factor Choice
|
|
, !- Energy Conversion Factor
|
|
, !- Demand Conversion Factor
|
|
, !- Time of Use Period Schedule Name
|
|
, !- Season Schedule Name
|
|
, !- Month Schedule Name
|
|
HalfHour, !- Demand Window Length
|
|
15.00, !- Monthly Charge or Variable Name
|
|
, !- Minimum Monthly Charge or Variable Name
|
|
, !- Real Time Pricing Charge Schedule Name
|
|
, !- Customer Baseline Load Schedule Name
|
|
Comm Elect; !- Group Name
|
|
|
|
UtilityCost:Charge:Block,
|
|
AnnualEnergyCharge, !- Utility Cost Charge Block Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
, !- Remaining Into Variable
|
|
, !- Block Size Multiplier Value or Variable Name
|
|
300, !- Block Size 1 Value or Variable Name
|
|
0.108222, !- Block 1 Cost per Unit Value or Variable Name
|
|
700, !- Block Size 2 Value or Variable Name
|
|
0.087021, !- Block 2 Cost per Unit Value or Variable Name
|
|
1500, !- Block Size 3 Value or Variable Name
|
|
0.078420, !- Block 3 Cost per Unit Value or Variable Name
|
|
remaining, !- Block Size 4 Value or Variable Name
|
|
0.058320; !- Block 4 Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Block,
|
|
AnnualDemandBaseCharge, !- Utility Cost Charge Block Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
, !- Remaining Into Variable
|
|
TotalDemand, !- Block Size Multiplier Value or Variable Name
|
|
190, !- Block Size 1 Value or Variable Name
|
|
0.0, !- Block 1 Cost per Unit Value or Variable Name
|
|
110, !- Block Size 2 Value or Variable Name
|
|
0.051773, !- Block 2 Cost per Unit Value or Variable Name
|
|
remaining, !- Block Size 3 Value or Variable Name
|
|
0.046965; !- Block 3 Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
FuelCostAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.002028; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
QualPollutionControlAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000536; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
SoxNoxRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.001127; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
DSMRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000370; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
PurchPowerTrackerAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000031; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
MidwestISOAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000216; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
CleanCoalRiderEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000833; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Qualify,
|
|
MinDemand75kw, !- Utility Cost Qualify Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
TotalDemand, !- Variable Name
|
|
Minimum, !- Qualify Type
|
|
75, !- Threshold Value or Variable Name
|
|
Annual, !- Season
|
|
Count, !- Threshold Test
|
|
12; !- Number of Months
|
|
|
|
UtilityCost:Charge:Simple,
|
|
TaxofeightPercent, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
SubTotal, !- Source Variable
|
|
Annual, !- Season
|
|
Taxes, !- Category Variable Name
|
|
0.08; !- Cost per Unit Value or Variable Name
|
|
|
|
!end PSI_LLF_LowLoadFactorService
|
|
|
|
UtilityCost:Tariff,
|
|
PSI_CS_CommercialElectricService, !- Name
|
|
Electricity:Facility, !- Output Meter Name
|
|
kWh, !- Conversion Factor Choice
|
|
, !- Energy Conversion Factor
|
|
, !- Demand Conversion Factor
|
|
, !- Time of Use Period Schedule Name
|
|
, !- Season Schedule Name
|
|
, !- Month Schedule Name
|
|
, !- Demand Window Length
|
|
9.40, !- Monthly Charge or Variable Name
|
|
, !- Minimum Monthly Charge or Variable Name
|
|
, !- Real Time Pricing Charge Schedule Name
|
|
, !- Customer Baseline Load Schedule Name
|
|
Comm Elect; !- Group Name
|
|
|
|
UtilityCost:Charge:Block,
|
|
AnnualEnergyCharge, !- Utility Cost Charge Block Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
, !- Remaining Into Variable
|
|
, !- Block Size Multiplier Value or Variable Name
|
|
300, !- Block Size 1 Value or Variable Name
|
|
0.082409, !- Block 1 Cost per Unit Value or Variable Name
|
|
700, !- Block Size 2 Value or Variable Name
|
|
0.072873, !- Block 2 Cost per Unit Value or Variable Name
|
|
1500, !- Block Size 3 Value or Variable Name
|
|
0.061696, !- Block 3 Cost per Unit Value or Variable Name
|
|
remaining, !- Block Size 4 Value or Variable Name
|
|
0.041179; !- Block 4 Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
FuelCostAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.002028; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
QualPollutionControlAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000536; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
SoxNoxRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.001127; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
DSMRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000021; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
PurchPowerTrackerAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000034; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
MidwestISOAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000203; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
CleanCoalRiderEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000807; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Qualify,
|
|
MaxDemand75kw, !- Utility Cost Qualify Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
TotalDemand, !- Variable Name
|
|
Maximum, !- Qualify Type
|
|
75, !- Threshold Value or Variable Name
|
|
Annual, !- Season
|
|
Count, !- Threshold Test
|
|
1; !- Number of Months
|
|
|
|
UtilityCost:Charge:Simple,
|
|
TaxofeightPercent, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
SubTotal, !- Source Variable
|
|
Annual, !- Season
|
|
Taxes, !- Category Variable Name
|
|
0.08; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Tariff,
|
|
IN_EIAMonthlyRateGas, !- Name
|
|
NaturalGas:Facility, !- Output Meter Name
|
|
MCF, !- Conversion Factor Choice
|
|
, !- Energy Conversion Factor
|
|
, !- Demand Conversion Factor
|
|
, !- Time of Use Period Schedule Name
|
|
, !- Season Schedule Name
|
|
, !- Month Schedule Name
|
|
, !- Demand Window Length
|
|
0.0, !- Monthly Charge or Variable Name
|
|
, !- Minimum Monthly Charge or Variable Name
|
|
, !- Real Time Pricing Charge Schedule Name
|
|
, !- Customer Baseline Load Schedule Name
|
|
Comm Gas; !- Group Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
MonthlyRateGasCharge, !- Utility Cost Charge Simple Name
|
|
IN_EIAMonthlyRateGas, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
IN_MonthlyGasRates; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Variable,
|
|
IN_MonthlyGasRates, !- Name
|
|
IN_EIAMonthlyRateGas, !- Tariff Name
|
|
Currency, !- Variable Type
|
|
8.22, !- January Value
|
|
7.51, !- February Value
|
|
8.97, !- March Value
|
|
9.01, !- April Value
|
|
9.16, !- May Value
|
|
10.44, !- June Value
|
|
10.32, !- July Value
|
|
10.13, !- August Value
|
|
9.20, !- September Value
|
|
8.18, !- October Value
|
|
7.83, !- November Value
|
|
7.63; !- December Value
|
|
|
|
UtilityCost:Charge:Simple,
|
|
TaxofEightPercent, !- Utility Cost Charge Simple Name
|
|
IN_EIAMonthlyRateGas, !- Tariff Name
|
|
SubTotal, !- Source Variable
|
|
Annual, !- Season
|
|
Taxes, !- Category Variable Name
|
|
0.08; !- Cost per Unit Value or Variable Name
|
|
|
|
! ***GENERAL REPORTING***
|
|
|
|
OutputControl:ReportingTolerances,
|
|
0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC}
|
|
0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC}
|
|
|
|
Output:SQLite,
|
|
Simple; !- Option Type
|
|
|
|
Output:VariableDictionary,IDF,Unsorted;
|
|
|
|
Output:Surfaces:List,Details;
|
|
|
|
Output:Surfaces:Drawing,DXF;
|
|
|
|
Output:Constructions,Constructions;
|
|
|
|
! ***REPORT METERS/VARIABLES***
|
|
|
|
Output:Meter,Electricity:Facility,HOURLY;
|
|
|
|
Output:Meter,Fans:Electricity,HOURLY;
|
|
|
|
Output:Meter,Cooling:Electricity,HOURLY;
|
|
|
|
Output:Meter,Heating:Electricity,HOURLY;
|
|
|
|
Output:Meter,InteriorLights:Electricity,HOURLY;
|
|
|
|
Output:Meter,InteriorEquipment:Electricity,HOURLY;
|
|
|
|
Output:Meter,NaturalGas:Facility,HOURLY;
|
|
|
|
Output:Meter,Heating:NaturalGas,HOURLY;
|
|
|
|
Output:Meter,InteriorEquipment:NaturalGas,HOURLY;
|
|
|
|
Output:Meter,Water Heater:WaterSystems:NaturalGas,HOURLY;
|
|
|
|
Output:Variable,*,Site Outdoor Air Drybulb Temperature,HOURLY;
|
|
|
|
Output:Variable,*,Site Outdoor Air Humidity Ratio,HOURLY;
|
|
|
|
Output:Variable,*,Site Outdoor Air Relative Humidity,HOURLY;
|
|
|
|
Output:Variable,*,Boiler NaturalGas Energy,HOURLY;
|
|
|
|
Output:Variable,*,Boiler Inlet Temperature,HOURLY;
|
|
|
|
Output:Variable,*,Boiler Outlet Temperature,HOURLY;
|
|
|
|
Output:Variable,*,Boiler Part Load Ratio,HOURLY;
|
|
|
|
Output:Variable,*,Chiller Part Load Ratio,HOURLY;
|
|
|
|
Output:Variable,*,Chiller Electricity Energy,HOURLY;
|
|
|
|
Output:Variable,*,Chiller COP,HOURLY;
|
|
|
|
Output:Variable,*,Plant System Cycle On Off Status,HOURLY;
|
|
|
|
Output:Variable,*,Plant Supply Side Cooling Demand Rate,HOURLY;
|
|
|
|
Output:Variable,*,Plant Supply Side Heating Demand Rate,HOURLY;
|
|
|
|
Output:Variable,*,Plant Supply Side Inlet Mass Flow Rate,HOURLY;
|
|
|
|
Output:Variable,*,Plant Supply Side Inlet Temperature,HOURLY;
|
|
|
|
Output:Variable,*,Plant Supply Side Outlet Temperature,HOURLY;
|
|
|
|
Output:Variable,*,Plant Supply Side Unmet Demand Rate,HOURLY;
|
|
|
|
Output:Variable,*,Air System Heating Coil Hot Water Energy,HOURLY;
|
|
|
|
Output:Variable,*,Air System Outdoor Air Flow Fraction,HOURLY;
|
|
|
|
Output:Variable,*,Air System Simulation Cycle On Off Status,HOURLY;
|
|
|
|
Output:Variable,*,Air System Outdoor Air Economizer Status,HOURLY;
|
|
|
|
Output:Variable,*,Air System Total Heating Energy,HOURLY;
|
|
|
|
Output:Variable,*,Air System Total Cooling Energy,HOURLY;
|
|
|
|
Output:Variable,*,Air System Fan Electricity Energy,HOURLY;
|
|
|
|
Output:Variable,*,Zone Mean Air Temperature,hourly;
|
|
|
|
! ***REPORT TABLES***
|
|
|
|
OutputControl:Table:Style,
|
|
HTML; !- Column Separator
|
|
|
|
Output:Table:SummaryReports,
|
|
AnnualBuildingUtilityPerformanceSummary, !- Report 1 Name
|
|
InputVerificationandResultsSummary, !- Report 2 Name
|
|
ClimaticDataSummary, !- Report 3 Name
|
|
EnvelopeSummary, !- Report 4 Name
|
|
EquipmentSummary, !- Report 5 Name
|
|
ComponentSizingSummary, !- Report 6 Name
|
|
HVACSizingSummary, !- Report 7 Name
|
|
SystemSummary, !- Report 8 Name
|
|
CoilSizingDetails; !- Report 9 Name
|
|
|
|
Output:Table:Monthly,
|
|
Emissions Data Summary, !- Name
|
|
4, !- Digits After Decimal
|
|
CO2:Facility, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
NOx:Facility, !- Variable or Meter 2 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 2
|
|
SO2:Facility, !- Variable or Meter 3 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 3
|
|
PM:Facility, !- Variable or Meter 4 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 4
|
|
Hg:Facility, !- Variable or Meter 5 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 5
|
|
WaterEnvironmentalFactors:Facility, !- Variable or Meter 6 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 6
|
|
Carbon Equivalent:Facility, !- Variable or Meter 7 Name
|
|
SumOrAverage; !- Aggregation Type for Variable or Meter 7
|
|
|
|
Output:Table:Monthly,
|
|
Components of Peak Electrical Demand, !- Name
|
|
3, !- Digits After Decimal
|
|
Electricity:Facility, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Electricity:Facility, !- Variable or Meter 2 Name
|
|
Maximum, !- Aggregation Type for Variable or Meter 2
|
|
InteriorLights:Electricity, !- Variable or Meter 3 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 3
|
|
InteriorEquipment:Electricity, !- Variable or Meter 4 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 4
|
|
Fans:Electricity, !- Variable or Meter 5 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 5
|
|
Heating:Electricity, !- Variable or Meter 6 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 6
|
|
Cooling:Electricity, !- Variable or Meter 7 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 7
|
|
ExteriorLights:Electricity, !- Variable or Meter 8 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 8
|
|
Pumps:Electricity, !- Variable or Meter 9 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 9
|
|
HeatRejection:Electricity, !- Variable or Meter 10 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 10
|
|
ExteriorEquipment:Electricity, !- Variable or Meter 11 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 11
|
|
Humidification:Electricity, !- Variable or Meter 12 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 12
|
|
HeatRecovery:Electricity,!- Variable or Meter 13 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 13
|
|
WaterSystems:Electricity,!- Variable or Meter 14 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 14
|
|
Refrigeration:Electricity, !- Variable or Meter 15 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 15
|
|
Generators:Electricity, !- Variable or Meter 16 Name
|
|
ValueWhenMaximumOrMinimum, !- Aggregation Type for Variable or Meter 16
|
|
ElectricityProduced:Facility, !- Variable or Meter 17 Name
|
|
ValueWhenMaximumOrMinimum; !- Aggregation Type for Variable or Meter 17
|
|
|
|
Output:Table:Monthly,
|
|
Boiler Part Load Performance, !- Name
|
|
2, !- Digits After Decimal
|
|
Boiler Part Load Ratio, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Boiler Part Load Ratio, !- Variable or Meter 2 Name
|
|
Maximum; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
Chiller Part Load Performance, !- Name
|
|
2, !- Digits After Decimal
|
|
Chiller Part Load Ratio, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Chiller Part Load Ratio, !- Variable or Meter 2 Name
|
|
Maximum; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:Monthly,
|
|
Fan Part Load Performance, !- Name
|
|
0, !- Digits After Decimal
|
|
Fan Electricity Rate, !- Variable or Meter 1 Name
|
|
SumOrAverage, !- Aggregation Type for Variable or Meter 1
|
|
Fan Electricity Rate, !- Variable or Meter 2 Name
|
|
Maximum; !- Aggregation Type for Variable or Meter 2
|
|
|
|
Output:Table:TimeBins,
|
|
*, !- Key Value
|
|
Zone Air Relative Humidity, !- Variable Name
|
|
60, !- Interval Start
|
|
10, !- Interval Size
|
|
4; !- Interval Count
|
|
|
|
Output:Table:TimeBins,
|
|
*, !- Key Value
|
|
Air System Outdoor Air Flow Fraction, !- Variable Name
|
|
0.00, !- Interval Start
|
|
0.20, !- Interval Size
|
|
5; !- Interval Count
|
|
|
|
Output:Table:TimeBins,
|
|
*, !- Key Value
|
|
Availability Manager Night Cycle Control Status, !- Variable Name
|
|
0, !- Interval Start
|
|
1, !- Interval Size
|
|
4; !- Interval Count
|
|
|
|
! ***ENVIRONMENTAL FACTORS REPORTING***
|
|
|
|
Output:EnvironmentalImpactFactors,
|
|
Monthly; !- Reporting Frequency
|
|
|
|
EnvironmentalImpactFactors,
|
|
0.663, !- District Heating Efficiency
|
|
4.18, !- District Cooling COP {W/W}
|
|
0.585, !- Steam Conversion Efficiency
|
|
80.7272, !- Total Carbon Equivalent Emission Factor From N2O {kg/kg}
|
|
6.2727, !- Total Carbon Equivalent Emission Factor From CH4 {kg/kg}
|
|
0.2727; !- Total Carbon Equivalent Emission Factor From CO2 {kg/kg}
|
|
|
|
! Indiana electricity source and emission factors based on Deru and Torcellini 2007
|
|
|
|
FuelFactors,
|
|
Electricity, !- Existing Fuel Resource Name
|
|
3.546, !- Source Energy Factor {J/J}
|
|
, !- Source Energy Schedule Name
|
|
3.417E+02, !- CO2 Emission Factor {g/MJ}
|
|
, !- CO2 Emission Factor Schedule Name
|
|
1.186E-01, !- CO Emission Factor {g/MJ}
|
|
, !- CO Emission Factor Schedule Name
|
|
7.472E-01, !- CH4 Emission Factor {g/MJ}
|
|
, !- CH4 Emission Factor Schedule Name
|
|
6.222E-01, !- NOx Emission Factor {g/MJ}
|
|
, !- NOx Emission Factor Schedule Name
|
|
8.028E-03, !- N2O Emission Factor {g/MJ}
|
|
, !- N2O Emission Factor Schedule Name
|
|
1.872E+00, !- SO2 Emission Factor {g/MJ}
|
|
, !- SO2 Emission Factor Schedule Name
|
|
0.0, !- PM Emission Factor {g/MJ}
|
|
, !- PM Emission Factor Schedule Name
|
|
1.739E-02, !- PM10 Emission Factor {g/MJ}
|
|
, !- PM10 Emission Factor Schedule Name
|
|
0.0, !- PM2.5 Emission Factor {g/MJ}
|
|
, !- PM2.5 Emission Factor Schedule Name
|
|
0.0, !- NH3 Emission Factor {g/MJ}
|
|
, !- NH3 Emission Factor Schedule Name
|
|
1.019E-02, !- NMVOC Emission Factor {g/MJ}
|
|
, !- NMVOC Emission Factor Schedule Name
|
|
5.639E-06, !- Hg Emission Factor {g/MJ}
|
|
, !- Hg Emission Factor Schedule Name
|
|
2.778E-05, !- Pb Emission Factor {g/MJ}
|
|
, !- Pb Emission Factor Schedule Name
|
|
0.4309556, !- Water Emission Factor {L/MJ}
|
|
, !- Water Emission Factor Schedule Name
|
|
0, !- Nuclear High Level Emission Factor {g/MJ}
|
|
, !- Nuclear High Level Emission Factor Schedule Name
|
|
0; !- Nuclear Low Level Emission Factor {m3/MJ}
|
|
|
|
! Deru and Torcellini 2007
|
|
! Source Energy and Emission Factors for Energy Use in Buildings
|
|
! NREL/TP-550-38617
|
|
! source factor and Higher Heating Values from Table 5
|
|
! post-combustion emission factors for boiler from Table 9 (with factor of 1000 correction for natural gas)
|
|
|
|
FuelFactors,
|
|
NaturalGas, !- Existing Fuel Resource Name
|
|
1.092, !- Source Energy Factor {J/J}
|
|
, !- Source Energy Schedule Name
|
|
5.21E+01, !- CO2 Emission Factor {g/MJ}
|
|
, !- CO2 Emission Factor Schedule Name
|
|
3.99E-02, !- CO Emission Factor {g/MJ}
|
|
, !- CO Emission Factor Schedule Name
|
|
1.06E-03, !- CH4 Emission Factor {g/MJ}
|
|
, !- CH4 Emission Factor Schedule Name
|
|
4.73E-02, !- NOx Emission Factor {g/MJ}
|
|
, !- NOx Emission Factor Schedule Name
|
|
1.06E-03, !- N2O Emission Factor {g/MJ}
|
|
, !- N2O Emission Factor Schedule Name
|
|
2.68E-04, !- SO2 Emission Factor {g/MJ}
|
|
, !- SO2 Emission Factor Schedule Name
|
|
0.0, !- PM Emission Factor {g/MJ}
|
|
, !- PM Emission Factor Schedule Name
|
|
3.59E-03, !- PM10 Emission Factor {g/MJ}
|
|
, !- PM10 Emission Factor Schedule Name
|
|
0.0, !- PM2.5 Emission Factor {g/MJ}
|
|
, !- PM2.5 Emission Factor Schedule Name
|
|
0, !- NH3 Emission Factor {g/MJ}
|
|
, !- NH3 Emission Factor Schedule Name
|
|
2.61E-03, !- NMVOC Emission Factor {g/MJ}
|
|
, !- NMVOC Emission Factor Schedule Name
|
|
1.11E-07, !- Hg Emission Factor {g/MJ}
|
|
, !- Hg Emission Factor Schedule Name
|
|
2.13E-07, !- Pb Emission Factor {g/MJ}
|
|
, !- Pb Emission Factor Schedule Name
|
|
0, !- Water Emission Factor {L/MJ}
|
|
, !- Water Emission Factor Schedule Name
|
|
0, !- Nuclear High Level Emission Factor {g/MJ}
|
|
, !- Nuclear High Level Emission Factor Schedule Name
|
|
0; !- Nuclear Low Level Emission Factor {m3/MJ}
|
|
|