36041 lines
1.7 MiB
Plaintext
36041 lines
1.7 MiB
Plaintext
! DOE Commercial Reference Building
|
|
! Outpatient Facility, new construction 90.1-2004
|
|
! Version 1.3_5.0
|
|
! EnergyPlus Version 5.0
|
|
! ASHRAE Standards 90.1-2004 and 62-1999
|
|
!
|
|
! Description: Outpatient surgery center, 1 floor of treatment rooms, 1 floor of exam rooms, and 1 floor of office space
|
|
! Form: Area = 3,804 m2 (40,946 ft2); Number of Stories = 3; Shape = irregular rectangle; Aspect ratio = 1.43
|
|
! Envelope: Envelope thermal properties vary with climate according to ASHRAE Standard 90.1-2004 commercial.
|
|
! Opaque constructions: Steel frame wall; Insulation entirely above deck; slab-on-grade floor
|
|
! Windows: window-to-wall ratio = 18.9%,
|
|
! Infiltration in perimeter zones only
|
|
! = 0.4 cfm/ft2 above grade wall area at 0.3 in wc (75 Pa) adjusted to 0.016 in wc (4 Pa).
|
|
! 50% of full value when ventilation system on.
|
|
! HVAC: DX cooling, natural gas boiler, 2 VAV systems with reheat
|
|
! Economizer per 90.1-2004
|
|
! Elevators: 3 @ 20 HP each, 91% motor efficiency
|
|
!
|
|
! Int. gains: W/m2 (W/ft2) lights elec plug gas plug
|
|
! Anesthesia 32.3 (3.0) 21.5 (2.0) 0
|
|
! Clean 12.9 (1.2) 21.5 (2.0) 0
|
|
! Conference 14.0 (1.3) 10.8 (1.0) 0
|
|
! Corridor 10.8 (1.0) 4.3 (0.4) 0
|
|
! Exam Room 16.2 (1.5) 11.8 (1.1) 0
|
|
! Lobby 14.0 (1.3) 11.8 (1.1) 0
|
|
! Lounge 8.6 () 32.3 (3.0) 0
|
|
! Nurse Stat. 10.8 (1.0) 21.5 (2.0) 0
|
|
! Office 11.8 (1.1) 11.8 (1.1) 0
|
|
! OR Rooms 23.7 (2.2) 43.1 (4.0) 75.3 (7.0)
|
|
! Pre-Op Rooms 7.5 (0.7) 21.5 (2.0) 0
|
|
! Procedure Room 29.1 (2.7) 32.3 (3.0) 0
|
|
! Radiology 4.3 (0.4) 107.6 (10.0) 0
|
|
! Restroom 9.7 (0.9) 4.3 (0.4) 0
|
|
! Soiled 12.9 (1.2) 21.5 (2.0) 0
|
|
! Storage 9.7 (0.9) 1.1 (0.1) 0
|
|
! Utility 9.7 (0.9) 1.1 (0.1) 0
|
|
!
|
|
! Detached Shading: None
|
|
! Daylight: None
|
|
! Natural Ventilation: None
|
|
! Zonal Equipment: None
|
|
! Air Primary Loops: VAV with hot water reheat (1st floor), VAV with electric reheat (2nd and 3rd floors)
|
|
! Plant Loops: SHWSys1, HeatSys1
|
|
! System Equipment Autosize: Yes
|
|
! Purchased Cooling: None
|
|
! Purchased Heating: None
|
|
! Coils: Coil:Heating:Water (1st floor and both AHUs); Coil:Heating:Electric (2nd and 3rd floors); Coil:Cooilng:DX:TwoSpeed (both AHUs)
|
|
! Pumps: Yes
|
|
! Boilers: Boiler:HotWater
|
|
! Chillers: None
|
|
!***** NOTICE *****
|
|
!***** The Reference Buildings were prepared as an account of work sponsored by an *****
|
|
!***** agency of the United States government. Neither the United States *****
|
|
!***** government nor any agency thereof, nor any of their employees, makes *****
|
|
!***** any warranty, express or implied, or assumes any legal liability or *****
|
|
!***** responsibility for the accuracy, completeness, or usefulness of any *****
|
|
!***** information, apparatus, product, or process disclosed, or represents *****
|
|
!***** that its use would not infringe privately owned rights. Reference *****
|
|
!***** herein to any specific commercial product, process, or service by *****
|
|
!***** trade name, trademark, manufacturer, or otherwise does not necessarily *****
|
|
!***** constitute or imply its endorsement, recommendation, or favoring by *****
|
|
!***** the United States government or any agency thereof. The views and *****
|
|
!***** opinions of authors expressed herein do not necessarily state or *****
|
|
!***** reflect those of the United States government or any agency thereof. *****
|
|
!***** Access to and use of the Reference Buildings imposes the following obligations *****
|
|
!***** on the user. The user agrees to credit DOE, NREL, PNNL, and LBNL in *****
|
|
!***** any publication(s) that that result from the use of Reference Buildings. *****
|
|
!***** However, the names of DOE/NREL/PNNL/LBNL may not be used in any *****
|
|
!***** advertising or publicity that implies endorsement or promotion of any *****
|
|
!***** products, services or commercial entities. *****
|
|
! Reference citation for the Commercial Reference Buildings:
|
|
! Deru, M.; Field, K.; Studer, D.; Benne, K.; Griffith, B.; Torcellini, P;
|
|
! Halverson, M.; Winiarski, D.; Liu, B.; Rosenberg, M.; Huang, J.;
|
|
! Yazdanian, M.; Crawley, D. (2010).
|
|
! U.S. Department of Energy Commercial Reference Building Models of the National Building Stock.
|
|
! Washington, DC: U.S. Department of Energy, Energy Efficiency and
|
|
! Renewable Energy, Office of Building Technologies.
|
|
! ***GENERAL SIMULATION PARAMETERS***
|
|
! Number of Zones: 118
|
|
|
|
Version,9.6;
|
|
|
|
SimulationControl,
|
|
YES, !- Do Zone Sizing Calculation
|
|
YES, !- Do System Sizing Calculation
|
|
YES, !- Do Plant Sizing Calculation
|
|
NO, !- Run Simulation for Sizing Periods
|
|
YES, !- Run Simulation for Weather File Run Periods
|
|
No, !- Do HVAC Sizing Simulation for Sizing Periods
|
|
1; !- Maximum Number of HVAC Sizing Simulation Passes
|
|
|
|
Building,
|
|
Ref Bldg OutPatient New2004_v1.3_5.0, !- Name
|
|
0.0000, !- North Axis {deg}
|
|
City, !- Terrain
|
|
0.0400, !- Loads Convergence Tolerance Value {W}
|
|
0.2000, !- Temperature Convergence Tolerance Value {deltaC}
|
|
FullInteriorAndExterior, !- Solar Distribution
|
|
25, !- Maximum Number of Warmup Days
|
|
6; !- Minimum Number of Warmup Days
|
|
|
|
RunPeriod,
|
|
RUNPERIOD 1, !- Name
|
|
1, !- Begin Month
|
|
1, !- Begin Day of Month
|
|
, !- Begin Year
|
|
12, !- End Month
|
|
31, !- End Day of Month
|
|
, !- End Year
|
|
Monday, !- Day of Week for Start Day
|
|
No, !- Use Weather File Holidays and Special Days
|
|
No, !- Use Weather File Daylight Saving Period
|
|
No, !- Apply Weekend Holiday Rule
|
|
Yes, !- Use Weather File Rain Indicators
|
|
Yes, !- Use Weather File Snow Indicators
|
|
; !- Treat Weather as Actual
|
|
|
|
! ***HOLIDAYS & DAYLIGHT SAVINGS***
|
|
|
|
RunPeriodControl:DaylightSavingTime,
|
|
2nd Sunday in March, !- Start Date
|
|
1st Sunday in November; !- End Date
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
New Years Day, !- Name
|
|
January 1, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Veterans Day, !- Name
|
|
November 11, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Christmas, !- Name
|
|
December 25, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Independence Day, !- Name
|
|
July 4, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
MLK Day, !- Name
|
|
3rd Monday in January, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Presidents Day, !- Name
|
|
3rd Monday in February, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Memorial Day, !- Name
|
|
Last Monday in May, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Labor Day, !- Name
|
|
1st Monday in September, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Columbus Day, !- Name
|
|
2nd Monday in October, !- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
RunPeriodControl:SpecialDays,
|
|
Thanksgiving, !- Name
|
|
4th Thursday in November,!- Start Date
|
|
1, !- Duration {days}
|
|
Holiday; !- Special Day Type
|
|
|
|
! ***SCHEDULE TYPES***
|
|
|
|
ScheduleTypeLimits,
|
|
Any Number; !- Name
|
|
|
|
ScheduleTypeLimits,
|
|
Fraction, !- Name
|
|
0.0, !- Lower Limit Value
|
|
1.0, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Temperature, !- Name
|
|
-60, !- Lower Limit Value
|
|
200, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
On/Off, !- Name
|
|
0, !- Lower Limit Value
|
|
1, !- Upper Limit Value
|
|
DISCRETE; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Control Type, !- Name
|
|
0, !- Lower Limit Value
|
|
4, !- Upper Limit Value
|
|
DISCRETE; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Humidity, !- Name
|
|
10, !- Lower Limit Value
|
|
90, !- Upper Limit Value
|
|
CONTINUOUS; !- Numeric Type
|
|
|
|
ScheduleTypeLimits,
|
|
Number; !- Name
|
|
|
|
! ***ALWAYS ON SCHEDULE***
|
|
|
|
Schedule:Compact,
|
|
ALWAYS_ON, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1; !- Field 3
|
|
|
|
! ***MISC SIMULATION PARAMETERS***
|
|
|
|
SurfaceConvectionAlgorithm:Inside,TARP;
|
|
|
|
SurfaceConvectionAlgorithm:Outside,DOE-2;
|
|
|
|
HeatBalanceAlgorithm,ConductionTransferFunction,200.0000;
|
|
|
|
ZoneAirHeatBalanceAlgorithm,
|
|
AnalyticalSolution; !- Algorithm
|
|
|
|
Sizing:Parameters,
|
|
1.5, !- Heating Sizing Factor
|
|
1.5, !- Cooling Sizing Factor
|
|
6; !- Timesteps in Averaging Window
|
|
|
|
ConvergenceLimits,
|
|
2, !- Minimum System Timestep {minutes}
|
|
25; !- Maximum HVAC Iterations
|
|
|
|
ShadowCalculation,
|
|
PolygonClipping, !- Shading Calculation Method
|
|
Periodic, !- Shading Calculation Update Frequency Method
|
|
7, !- Shading Calculation Update Frequency
|
|
15000; !- Maximum Figures in Shadow Overlap Calculations
|
|
|
|
Timestep,6;
|
|
|
|
! WeatherFileName=USA_IL_Chicago-OHare_TMY2.epw
|
|
|
|
Site:Location,
|
|
USA IL-CHICAGO-OHARE, !- Name
|
|
41.77, !- Latitude {deg}
|
|
-87.75, !- Longitude {deg}
|
|
-6.00, !- Time Zone {hr}
|
|
190; !- Elevation {m}
|
|
|
|
! CHICAGO_IL_USA Annual Heating 99.6%, MaxDB=-20.6°C
|
|
|
|
SizingPeriod:DesignDay,
|
|
CHICAGO Ann Htg 99.6% Condns DB, !- Name
|
|
1, !- Month
|
|
21, !- Day of Month
|
|
WinterDesignDay, !- Day Type
|
|
-20.6, !- Maximum Dry-Bulb Temperature {C}
|
|
0.0, !- Daily Dry-Bulb Temperature Range {deltaC}
|
|
, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Day Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
-20.6, !- Wetbulb or DewPoint at Maximum Dry-Bulb {C}
|
|
, !- Humidity Condition Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily Wet-Bulb Temperature Range {deltaC}
|
|
99063., !- Barometric Pressure {Pa}
|
|
4.9, !- Wind Speed {m/s}
|
|
270, !- Wind Direction {deg}
|
|
No, !- Rain Indicator
|
|
No, !- Snow Indicator
|
|
No, !- Daylight Saving Time Indicator
|
|
ASHRAEClearSky, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless}
|
|
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless}
|
|
0.00; !- Sky Clearness
|
|
|
|
! CHICAGO_IL_USA Annual Cooling (WB=>MDB) .4%, MDB=31.2°C WB=25.5°C
|
|
|
|
SizingPeriod:DesignDay,
|
|
CHICAGO Ann Clg .4% Condns WB=>MDB, !- Name
|
|
7, !- Month
|
|
21, !- Day of Month
|
|
SummerDesignDay, !- Day Type
|
|
31.2, !- Maximum Dry-Bulb Temperature {C}
|
|
10.7, !- Daily Dry-Bulb Temperature Range {deltaC}
|
|
, !- Dry-Bulb Temperature Range Modifier Type
|
|
, !- Dry-Bulb Temperature Range Modifier Day Schedule Name
|
|
Wetbulb, !- Humidity Condition Type
|
|
25.5, !- Wetbulb or DewPoint at Maximum Dry-Bulb {C}
|
|
, !- Humidity Condition Day Schedule Name
|
|
, !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir}
|
|
, !- Enthalpy at Maximum Dry-Bulb {J/kg}
|
|
, !- Daily Wet-Bulb Temperature Range {deltaC}
|
|
99063., !- Barometric Pressure {Pa}
|
|
5.3, !- Wind Speed {m/s}
|
|
230, !- Wind Direction {deg}
|
|
No, !- Rain Indicator
|
|
No, !- Snow Indicator
|
|
No, !- Daylight Saving Time Indicator
|
|
ASHRAEClearSky, !- Solar Model Indicator
|
|
, !- Beam Solar Day Schedule Name
|
|
, !- Diffuse Solar Day Schedule Name
|
|
, !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless}
|
|
, !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless}
|
|
1.00; !- Sky Clearness
|
|
|
|
Site:WaterMainsTemperature,
|
|
CORRELATION, !- Calculation Method
|
|
, !- Temperature Schedule Name
|
|
9.69, !- Annual Average Outdoor Air Temperature {C}
|
|
28.10; !- Maximum Difference In Monthly Average Outdoor Air Temperatures {deltaC}
|
|
|
|
Site:GroundTemperature:BuildingSurface,19.527,19.502,19.536,19.598,20.002,21.640,22.225,22.375,21.449,20.121,19.802,19.633;
|
|
|
|
! ***OPAQUE CONSTRUCTIONS AND MATERIALS***
|
|
! Exterior Walls
|
|
|
|
Construction,
|
|
Steel Frame Non-res Ext Wall, !- Name
|
|
Wood Siding, !- Outside Layer
|
|
Steel Frame NonRes Wall Insulation, !- Layer 2
|
|
1/2IN Gypsum; !- Layer 3
|
|
|
|
Material,
|
|
Steel Frame NonRes Wall Insulation, !- Name
|
|
MediumRough, !- Roughness
|
|
0.0870564552646045, !- Thickness {m}
|
|
0.049, !- Conductivity {W/m-K}
|
|
265.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! Roof
|
|
|
|
Construction,
|
|
IEAD Non-res Roof, !- Name
|
|
Roof Membrane, !- Outside Layer
|
|
IEAD NonRes Roof Insulation, !- Layer 2
|
|
Metal Decking; !- Layer 3
|
|
|
|
Material,
|
|
IEAD NonRes Roof Insulation, !- Name
|
|
MediumRough, !- Roughness
|
|
0.127338688569477, !- Thickness {m}
|
|
0.049, !- Conductivity {W/m-K}
|
|
265.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! Slab on grade, unheated
|
|
|
|
Construction,
|
|
ext-slab, !- Name
|
|
HW CONCRETE, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
! Interior Walls
|
|
|
|
Construction,
|
|
int-walls, !- Name
|
|
1/2IN Gypsum, !- Outside Layer
|
|
1/2IN Gypsum; !- Layer 2
|
|
|
|
! Interior Floors
|
|
|
|
Construction,
|
|
INT-FLOOR-TOPSIDE, !- Name
|
|
MAT-CC05 4 HW CONCRETE, !- Outside Layer
|
|
CP02 CARPET PAD; !- Layer 2
|
|
|
|
Construction,
|
|
INT-FLOOR-UNDERSIDE, !- Name
|
|
CP02 CARPET PAD, !- Outside Layer
|
|
MAT-CC05 4 HW CONCRETE; !- Layer 2
|
|
|
|
! ***WINDOW/DOOR CONSTRUCTIONS AND MATERIALS***
|
|
|
|
Construction,
|
|
Window Non-res Fixed, !- Name
|
|
NonRes Fixed Assembly Window; !- Outside Layer
|
|
|
|
WindowMaterial:SimpleGlazingSystem,
|
|
NonRes Fixed Assembly Window, !- Name
|
|
3.23646, !- U-Factor {W/m2-K}
|
|
0.39, !- Solar Heat Gain Coefficient
|
|
; !- Visible Transmittance
|
|
|
|
Construction,
|
|
Swinging Door Non-res, !- Name
|
|
Opaque Door panel NonRes;!- Outside Layer
|
|
|
|
Material:NoMass,
|
|
Opaque Door panel NonRes,!- Name
|
|
MediumRough, !- Roughness
|
|
0.101897046243647, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7, !- Solar Absorptance
|
|
0.7; !- Visible Absorptance
|
|
|
|
! ***COMMON CONSTRUCTIONS AND MATERIALS***
|
|
|
|
Construction,
|
|
DropCeiling, !- Name
|
|
Std AC02; !- Outside Layer
|
|
|
|
Construction,
|
|
AIR-WALL, !- Name
|
|
MAT-AIR-WALL; !- Outside Layer
|
|
|
|
Construction,
|
|
InteriorFurnishings, !- Name
|
|
Std Wood 6inch; !- Outside Layer
|
|
|
|
Material,
|
|
Std Wood 6inch, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.15, !- Thickness {m}
|
|
0.12, !- Conductivity {W/m-K}
|
|
540.0000, !- Density {kg/m3}
|
|
1210, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.7000000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Wood Siding, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0100, !- Thickness {m}
|
|
0.1100, !- Conductivity {W/m-K}
|
|
544.6200, !- Density {kg/m3}
|
|
1210.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7800, !- Solar Absorptance
|
|
0.7800; !- Visible Absorptance
|
|
|
|
Material,
|
|
1/2IN Gypsum, !- Name
|
|
Smooth, !- Roughness
|
|
0.0127, !- Thickness {m}
|
|
0.1600, !- Conductivity {W/m-K}
|
|
784.9000, !- Density {kg/m3}
|
|
830.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.9200, !- Solar Absorptance
|
|
0.9200; !- Visible Absorptance
|
|
|
|
Material,
|
|
1IN Stucco, !- Name
|
|
Smooth, !- Roughness
|
|
0.0253, !- Thickness {m}
|
|
0.6918, !- Conductivity {W/m-K}
|
|
1858.0000, !- Density {kg/m3}
|
|
837.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.9200, !- Solar Absorptance
|
|
0.9200; !- Visible Absorptance
|
|
|
|
Material,
|
|
8IN CONCRETE HW, !- Name
|
|
Rough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
1.3110, !- Conductivity {W/m-K}
|
|
2240.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Metal Siding, !- Name
|
|
Smooth, !- Roughness
|
|
0.0015, !- Thickness {m}
|
|
44.9600, !- Conductivity {W/m-K}
|
|
7688.8600, !- Density {kg/m3}
|
|
410.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.2000, !- Solar Absorptance
|
|
0.2000; !- Visible Absorptance
|
|
|
|
Material,
|
|
HW CONCRETE, !- Name
|
|
Rough, !- Roughness
|
|
0.2032, !- Thickness {m}
|
|
1.3110, !- Conductivity {W/m-K}
|
|
2240.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
CP02 CARPET PAD, !- Name
|
|
VeryRough, !- Roughness
|
|
0.2165, !- Thermal Resistance {m2-K/W}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.8000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Roof Membrane, !- Name
|
|
VeryRough, !- Roughness
|
|
0.0095, !- Thickness {m}
|
|
0.1600, !- Conductivity {W/m-K}
|
|
1121.2900, !- Density {kg/m3}
|
|
1460.0000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Metal Decking, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0015, !- Thickness {m}
|
|
45.0060, !- Conductivity {W/m-K}
|
|
7680.0000, !- Density {kg/m3}
|
|
418.4000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.3000; !- Visible Absorptance
|
|
|
|
Material,
|
|
Metal Roofing, !- Name
|
|
MediumSmooth, !- Roughness
|
|
0.0015, !- Thickness {m}
|
|
45.0060, !- Conductivity {W/m-K}
|
|
7680.0000, !- Density {kg/m3}
|
|
418.4000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.3000; !- Visible Absorptance
|
|
|
|
Material,
|
|
MAT-CC05 4 HW CONCRETE, !- Name
|
|
Rough, !- Roughness
|
|
0.1016, !- Thickness {m}
|
|
1.3110, !- Conductivity {W/m-K}
|
|
2240.0000, !- Density {kg/m3}
|
|
836.8000, !- Specific Heat {J/kg-K}
|
|
0.9000, !- Thermal Absorptance
|
|
0.7000, !- Solar Absorptance
|
|
0.7000; !- Visible Absorptance
|
|
|
|
! Acoustic tile for drop ceiling
|
|
|
|
Material,
|
|
Std AC02, !- Name
|
|
MediumSmooth, !- Roughness
|
|
1.2700000E-02, !- Thickness {m}
|
|
5.7000000E-02, !- Conductivity {W/m-K}
|
|
288.0000, !- Density {kg/m3}
|
|
1339.000, !- Specific Heat {J/kg-K}
|
|
0.9000000, !- Thermal Absorptance
|
|
0.7000000, !- Solar Absorptance
|
|
0.2000000; !- Visible Absorptance
|
|
|
|
Material:NoMass,
|
|
MAT-AIR-WALL, !- Name
|
|
Rough, !- Roughness
|
|
0.2079491, !- Thermal Resistance {m2-K/W}
|
|
0.9, !- Thermal Absorptance
|
|
0.7; !- Solar Absorptance
|
|
|
|
! ZONE LIST:
|
|
! Floor 1 Anesthesia
|
|
! Floor 1 Bio Haz
|
|
! Floor 1 Cafe
|
|
! Floor 1 Clean
|
|
! Floor 1 Clean Work
|
|
! Floor 1 Dictation
|
|
! Floor 1 Dressing Room
|
|
! Floor 1 Electrical Room
|
|
! Floor 1 Elevator Pump Room
|
|
! Floor 1 Humid
|
|
! Floor 1 IT Hall
|
|
! Floor 1 IT Room
|
|
! Floor 1 Lobby
|
|
! Floor 1 Lobby Hall
|
|
! Floor 1 Lobby Toilet
|
|
! Floor 1 Locker Room
|
|
! Floor 1 Locker Room Hall
|
|
! Floor 1 Lounge
|
|
! Floor 1 MRI Control Room
|
|
! Floor 1 MRI Hall
|
|
! Floor 1 MRI Room
|
|
! Floor 1 MRI Toilet
|
|
! Floor 1 Med Gas
|
|
! Floor 1 Nourishment
|
|
! Floor 1 Nurse Hall
|
|
! Floor 1 Nurse Janitor
|
|
! Floor 1 Nurse Station
|
|
! Floor 1 Nurse Toilet
|
|
! Floor 1 Office
|
|
! Floor 1 Operating Room 1
|
|
! Floor 1 Operating Room 2
|
|
! Floor 1 Operating Room 3
|
|
! Floor 1 PACU
|
|
! Floor 1 Pre-Op Hall
|
|
! Floor 1 Pre-Op Room 1
|
|
! Floor 1 Pre-Op Room 2
|
|
! Floor 1 Pre-Op Toilet
|
|
! Floor 1 Procedure Room
|
|
! Floor 1 Reception
|
|
! Floor 1 Reception Hall
|
|
! Floor 1 Recovery Room
|
|
! Floor 1 Scheduling
|
|
! Floor 1 Scrub
|
|
! Floor 1 Soil
|
|
! Floor 1 Soil Hold
|
|
! Floor 1 Soil Work
|
|
! Floor 1 Step Down
|
|
! Floor 1 Sterile Hall
|
|
! Floor 1 Sterile Storage
|
|
! Floor 1 Storage
|
|
! Floor 1 Sub-Sterile
|
|
! Floor 1 Utility Hall
|
|
! Floor 1 Utility Janitor
|
|
! Floor 1 Utility Room
|
|
! Floor 1 Vestibule
|
|
! Floor 2 Conference
|
|
! Floor 2 Conference Toilet
|
|
! Floor 2 Dictation
|
|
! Floor 2 Exam 2
|
|
! Floor 2 Exam 3
|
|
! Floor 2 Exam 4
|
|
! Floor 2 Exam 5
|
|
! Floor 2 Exam 6
|
|
! Floor 2 Exam 7
|
|
! Floor 2 Exam 8
|
|
! Floor 2 Exam 9
|
|
! Floor 2 Exam Hall 1
|
|
! Floor 2 Exam Hall 2
|
|
! Floor 2 Exam Hall 3
|
|
! Floor 2 Exam Hall 4
|
|
! Floor 2 Exam Hall 5
|
|
! Floor 2 Exam Hall 6
|
|
! Floor 2 Janitor
|
|
! Floor 2 Lounge
|
|
! Floor 2 Nurse Station 1
|
|
! Floor 2 Nurse Station 2
|
|
! Floor 2 Office
|
|
! Floor 2 Office Hall
|
|
! Floor 2 Reception
|
|
! Floor 2 Reception Hall
|
|
! Floor 2 Reception Toilet
|
|
! Floor 2 Scheduling 1
|
|
! Floor 2 Scheduling 2
|
|
! Floor 2 Storage 1
|
|
! Floor 2 Storage 2
|
|
! Floor 2 Storage 3
|
|
! Floor 2 Utility
|
|
! Floor 2 Work
|
|
! Floor 2 Work Hall
|
|
! Floor 2 Work Toilet
|
|
! Floor 2 X-Ray
|
|
! Floor 3 Dressing Room
|
|
! Floor 3 Elevator Hall
|
|
! Floor 3 Humid
|
|
! Floor 3 Janitor
|
|
! Floor 3 Locker
|
|
! Floor 3 Lounge
|
|
! Floor 3 Lounge Toilet
|
|
! Floor 3 Mechanical
|
|
! Floor 3 Mechanical Hall
|
|
! Floor 3 Office
|
|
! Floor 3 Office Hall
|
|
! Floor 3 Office Toilet
|
|
! Floor 3 Physical Therapy 1
|
|
! Floor 3 Physical Therapy 2
|
|
! Floor 3 Physical Therapy Toilet
|
|
! Floor 3 Storage 1
|
|
! Floor 3 Storage 2
|
|
! Floor 3 Treatment
|
|
! Floor 3 Undeveloped 1
|
|
! Floor 3 Undeveloped 2
|
|
! Floor 3 Utility
|
|
! Floor 3 Work
|
|
! NE Stair
|
|
! NW Elevator
|
|
! NW Stair
|
|
! SW Stair
|
|
! ***ZONES***
|
|
|
|
Zone,
|
|
Floor 1 Anesthesia, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
39.3192, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Bio Haz, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
39.3192, !- X Origin {m}
|
|
25.9080, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Cafe, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
19.2024, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Clean, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
29.2608, !- X Origin {m}
|
|
8.8392, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Clean Work, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
42.0624, !- X Origin {m}
|
|
9.7536, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Dictation, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
32.0040, !- X Origin {m}
|
|
8.8392, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Dressing Room, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
15.5448, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Electrical Room, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
50.5968, !- X Origin {m}
|
|
18.5928, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Elevator Pump Room, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
3.9624, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Humid, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
32.0040, !- X Origin {m}
|
|
14.9352, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 IT Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
33.5280, !- X Origin {m}
|
|
25.9080, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 IT Room, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
37.1856, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Lobby, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
2.1336, !- X Origin {m}
|
|
24.3840, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Lobby Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
11.8872, !- X Origin {m}
|
|
19.2024, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Lobby Toilet, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
26.2128, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Locker Room, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
29.8704, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Locker Room Hall,!- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
23.1648, !- X Origin {m}
|
|
19.2024, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Lounge, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
29.8704, !- X Origin {m}
|
|
19.2024, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 MRI Control Room,!- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
12.8016, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 MRI Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
11.8872, !- X Origin {m}
|
|
25.9080, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 MRI Room, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
6.7056, !- X Origin {m}
|
|
25.9080, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 MRI Toilet, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
17.3736, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Med Gas, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
44.5008, !- X Origin {m}
|
|
33.2232, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Nourishment, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
27.1272, !- X Origin {m}
|
|
16.7640, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Nurse Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
39.3192, !- X Origin {m}
|
|
3.6576, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Nurse Janitor, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
29.2608, !- X Origin {m}
|
|
16.7640, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Nurse Station, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
32.0040, !- X Origin {m}
|
|
8.8392, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Nurse Toilet, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
37.4904, !- X Origin {m}
|
|
8.8392, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Office, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
14.6304, !- X Origin {m}
|
|
15.8496, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Operating Room 1,!- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
44.8056, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Operating Room 2,!- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
50.5968, !- X Origin {m}
|
|
11.2776, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Operating Room 3,!- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
33.5280, !- X Origin {m}
|
|
19.2024, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 PACU, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
35.6616, !- X Origin {m}
|
|
8.8392, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Pre-Op Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
20.7264, !- X Origin {m}
|
|
23.7744, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Pre-Op Room 1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
17.9832, !- X Origin {m}
|
|
13.4112, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Pre-Op Room 2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
24.3840, !- X Origin {m}
|
|
8.8392, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Pre-Op Toilet, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
17.9832, !- X Origin {m}
|
|
5.4864, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Procedure Room, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
22.8600, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Reception, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
9.7536, !- X Origin {m}
|
|
9.1440, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Reception Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
20.7264, !- X Origin {m}
|
|
14.3256, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Recovery Room, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
20.4216, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Scheduling, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
15.8496, !- X Origin {m}
|
|
9.1440, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Scrub, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
44.5008, !- X Origin {m}
|
|
11.2776, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Soil, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
34.7472, !- X Origin {m}
|
|
13.1064, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Soil Hold, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
37.1856, !- X Origin {m}
|
|
25.9080, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Soil Work, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
42.0624, !- X Origin {m}
|
|
6.0960, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Step Down, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
20.4216, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Sterile Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
42.0624, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Sterile Storage, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
32.0040, !- X Origin {m}
|
|
13.1064, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Storage, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
41.4528, !- X Origin {m}
|
|
35.3568, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Sub-Sterile, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
50.5968, !- X Origin {m}
|
|
7.0104, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Utility Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
44.5008, !- X Origin {m}
|
|
28.9560, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Utility Janitor, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
44.5008, !- X Origin {m}
|
|
20.7264, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Utility Room, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
50.5968, !- X Origin {m}
|
|
20.7264, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 1 Vestibule, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
17.9832, !- X Origin {m}
|
|
7.9248, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Conference, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
50.5968, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Conference Toilet, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
44.5008, !- X Origin {m}
|
|
6.0960, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Dictation, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
42.0624, !- X Origin {m}
|
|
9.1440, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam 1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
17.9832, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam 2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
23.4696, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam 3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
30.7848, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam 4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
39.9288, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam 5, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
50.5968, !- X Origin {m}
|
|
18.5928, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam 6, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
44.5008, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam 7, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
38.1000, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam 8, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
28.9560, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam 9, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
21.6408, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam Hall 1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
21.6408, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam Hall 2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
28.9560, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam Hall 3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
38.1000, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam Hall 4, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
39.9288, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam Hall 5, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
30.7848, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Exam Hall 6, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
23.4696, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Janitor, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Lounge, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
44.5008, !- X Origin {m}
|
|
9.1440, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Nurse Station 1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
39.0144, !- X Origin {m}
|
|
21.3360, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Nurse Station 2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
23.4696, !- X Origin {m}
|
|
21.3360, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Office, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
50.5968, !- X Origin {m}
|
|
3.6576, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Office Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
46.3296, !- X Origin {m}
|
|
3.6576, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Reception, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
2.1336, !- X Origin {m}
|
|
16.4592, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Reception Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
17.9832, !- X Origin {m}
|
|
9.1440, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Reception Toilet,!- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
17.9832, !- X Origin {m}
|
|
10.9728, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Scheduling 1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
44.5008, !- X Origin {m}
|
|
16.4592, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Scheduling 2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
23.7744, !- X Origin {m}
|
|
16.4592, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Storage 1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
42.0624, !- X Origin {m}
|
|
3.6576, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Storage 2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
39.0144, !- X Origin {m}
|
|
23.7744, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Storage 3, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
23.4696, !- X Origin {m}
|
|
21.3360, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Utility, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
50.5968, !- X Origin {m}
|
|
18.5928, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Work, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
17.9832, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Work Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
44.5008, !- X Origin {m}
|
|
16.4592, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 Work Toilet, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
26.2128, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 2 X-Ray, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
39.0144, !- X Origin {m}
|
|
16.4592, !- Y Origin {m}
|
|
3.0480, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Dressing Room, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
39.0144, !- X Origin {m}
|
|
10.9728, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Elevator Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
5.7912, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Humid, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
35.0520, !- X Origin {m}
|
|
16.4592, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Janitor, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Locker, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
37.4904, !- X Origin {m}
|
|
20.4216, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Lounge, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
37.4904, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Lounge Toilet, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
33.8328, !- X Origin {m}
|
|
23.4696, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Mechanical, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
50.5968, !- X Origin {m}
|
|
18.5928, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Mechanical Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
46.3296, !- X Origin {m}
|
|
3.6576, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Office, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
33.8328, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Office Hall, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
2.1336, !- X Origin {m}
|
|
16.4592, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Office Toilet, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
24.3840, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Physical Therapy 1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
50.5968, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Physical Therapy 2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
35.0520, !- X Origin {m}
|
|
10.9728, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Physical Therapy Toilet, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
39.0144, !- X Origin {m}
|
|
10.9728, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Storage 1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
39.0144, !- X Origin {m}
|
|
10.9728, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Storage 2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
37.4904, !- X Origin {m}
|
|
18.2880, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Treatment, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
30.7848, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Undeveloped 1, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
17.9832, !- X Origin {m}
|
|
0.0000, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Undeveloped 2, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
2.1336, !- X Origin {m}
|
|
11.5824, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Utility, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
39.0144, !- X Origin {m}
|
|
16.4592, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
Floor 3 Work, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
50.5968, !- X Origin {m}
|
|
18.5928, !- Y Origin {m}
|
|
6.0960, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
NE Stair, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
51.8160, !- X Origin {m}
|
|
26.2128, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
NW Elevator, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.0000, !- X Origin {m}
|
|
24.3840, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
NW Stair, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
12.8016, !- X Origin {m}
|
|
28.3464, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
Zone,
|
|
SW Stair, !- Name
|
|
0.0000, !- Direction of Relative North {deg}
|
|
0.9144, !- X Origin {m}
|
|
11.5824, !- Y Origin {m}
|
|
0.0000, !- Z Origin {m}
|
|
1, !- Type
|
|
1, !- Multiplier
|
|
, !- Ceiling Height {m}
|
|
, !- Volume {m3}
|
|
autocalculate, !- Floor Area {m2}
|
|
, !- Zone Inside Convection Algorithm
|
|
, !- Zone Outside Convection Algorithm
|
|
Yes; !- Part of Total Floor Area
|
|
|
|
! ***WALLS***
|
|
|
|
BuildingSurface:Detailed,
|
|
1003C1, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Sterile Storage, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1003C1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.0584,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.0584,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
102EC4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
102EC4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.6096,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1068C8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
SW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BAD27A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.8768,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.8768,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.2192,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.2192,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
10830D, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Scheduling 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
10830D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-5.4864,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
10E44F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
10E44F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
10FB67, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam 6, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
10FB67, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.5720,-4.5720,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.5720,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-4.5720,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
111907, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Utility, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
111907, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
114EC6, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
114EC6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-16.1544,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-16.1544,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
115AA8, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Reception Toilet,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
115AA8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.4864,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,5.4864,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
11E9BF, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Reception Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
11E9BF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.8768,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.8768,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.8768,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.8768,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
121DFF, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Soil Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
121DFF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.5720,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.5720,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
13225F, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Undeveloped 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
13225F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,16.4592,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
12.8016,16.4592,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
12.8016,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
137A14, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Dressing Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
137A14, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
137CDB, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Storage 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
137CDB, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
14A82B, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Office Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
14A82B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
42.3672,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
42.3672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
14F382, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
14F382, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1535AC, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Pre-Op Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
155BD6, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam Hall 5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
156F92, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Nurse Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
156F92, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,-2.7432,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.7432,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
16BE00, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A8FC82, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-7.3152,2.1336,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
-7.3152,2.1336,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-7.3152,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.3152,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
16E41D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Storage 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
16E41D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.9144,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.9144,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1701A6, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Conference Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1701A6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
17258E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
SW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
3DE7A6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.8768,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.8768,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.2192,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.2192,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1747DE, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Operating Room 2,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1747DE, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.0960,7.3152,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.0960,7.3152,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1775A6, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam 1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
180143, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Utility, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
180143, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,-3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,-3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1875B3, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Sub-Sterile, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1875B3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
18AFE3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
18AFE3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
192E17, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Undeveloped 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
192E17, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.8496,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.8496,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.8496,4.8768,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.8496,4.8768,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
196C5F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Sub-Sterile, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
196C5F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
19D150, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Storage, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
19D150, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-11.5824,-7.0104,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-11.5824,-7.0104,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,-7.0104,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,-7.0104,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1AD133, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Anesthesia, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1AD133, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1B2EF8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Scrub, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1B2EF8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1C33AD, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Work Hall, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-42.3672,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-42.3672,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-42.3672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-42.3672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1CF7B0, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Storage 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1CF7B0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.9144,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.9144,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1D53D9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1D53D9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1D96D7, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Operating Room 2,!- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,7.3152,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,7.3152,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1D9EED, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1D9EED, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1DC177, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Mechanical, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1DC177, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.6200,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,7.6200,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1DEE26, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Undeveloped 2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
15.8496,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
15.8496,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1E3410, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Storage 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1E3410, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,2.4384,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1EB5B1, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 6, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1EB5B1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-4.5720,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
1F37D7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Storage 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1F37D7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
204CB9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A28F01, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.0960,5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
208CCF, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Conference, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
211EA4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Storage 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
211EA4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
212961, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Elevator Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
212961, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2272E0, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Humid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2272E0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
231744, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Vestibule, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
231744, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
23683B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Soil Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
23683B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.5720,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.5720,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
23C13E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
23C13E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
13.7160,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
13.7160,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
23FD0A, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 X-Ray, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
23FD0A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-15.2400,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-15.2400,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
240A7C, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Conference, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
240A7C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.5344,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.5344,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2451B7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Treatment, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2451B7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.2672,6.0960,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.2672,6.0960,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.2672,10.9728,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.2672,10.9728,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
247258, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 7, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
247258, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-7.3152,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-7.3152,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-7.3152,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.3152,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
247FD8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
247FD8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
24DA9F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Scheduling 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
24DA9F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
24EAE3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Scrub, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
24EAE3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
256F02, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Dressing Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
256F02, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.5240,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-1.5240,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
25A972, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Treatment, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
25A972, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.2672,16.4592,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.2672,6.0960,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.0960,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,16.4592,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
25AB11, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
25AB11, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,7.6200,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,7.6200,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,7.6200,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,7.6200,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
26E66C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
26E66C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
7.3152,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
7.3152,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
7.3152,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
7.3152,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
270BCE, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
SW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.2192,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.2192,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.2192,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.2192,-2.4384,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2730E5, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2730E5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,7.6200,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,7.6200,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,14.6304,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.5720,14.6304,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2740BD, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Reception Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2740BD, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
26.5176,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
26.5176,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
26.5176,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
26.5176,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
27B0D7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
27B0D7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.9144,0.9144,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.9144,0.9144,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.9144,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.9144,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
27D999, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Physical Therapy 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
27D999, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-4.8768,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-4.8768,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2805F0, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Nurse Station 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2805F0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,-3.0480,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.9144,-3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.9144,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
28B002, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Recovery Room, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.1816,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1816,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
18.8976,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
18.8976,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
28DE5A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nourishment, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
28DE5A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-7.9248,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-7.9248,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
290CAB, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 MRI Control Room,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
290CAB, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.4008,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.4384,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.4008,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
290DF3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Utility, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
290DF3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
296861, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Dictation, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
296861, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-3.0480,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2AC8D1, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Operating Room 3,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2AC8D1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.1816,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.5344,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.5344,5.1816,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2B4DBD, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 PACU, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2B4DBD, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2B5816, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2B5816, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,0.9144,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,0.9144,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,7.9248,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,7.9248,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2BC70D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Utility, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2BC70D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2C8181, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2C8181, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-28.0416,-10.0584,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-28.0416,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2CB843, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Nurse Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2CB843, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-1.8288,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2CF0AA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 IT Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2CF0AA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2D0A7F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Reception Toilet,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2D0A7F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2D53AC, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Electrical Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2D53AC, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2DB420, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Dictation, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2DB420, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,-3.0480,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,-3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-3.0480,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2DEB73, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2DEB73, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2E2D0C, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
NW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.5240,2.4384,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.5240,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-8.8392,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-8.8392,2.4384,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2E6DF0, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2E6DF0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2E74E6, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Mechanical Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2E74E6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.3152,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,7.3152,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,22.5552,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,22.5552,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2E8328, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2E8328, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2FAF44, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2FAF44, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.1816,-6.7056,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1816,-6.7056,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.1816,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.1816,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
2FEACD, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Vestibule, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
2FEACD, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
301CE0, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Storage 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
301CE0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
307901, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 IT Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
307901, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
30A09C, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Office Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
30A09C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,22.5552,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,22.5552,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
30DB21, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
30DB21, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
3179A6, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Sterile Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
3179A6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.4384,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.4384,23.4696,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,23.4696,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
319A6B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 IT Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
319A6B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.6096,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
31B3DF, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam 5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
31B3DF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.6200,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,7.6200,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
32CC19, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Bio Haz, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
32CC19, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
330DF9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Anesthesia, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
330DF9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
3330D8, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Vestibule, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
33A280, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
33A280, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-20.1168,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-20.1168,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
34019D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
34019D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
34B8D8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 X-Ray, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
34B8D8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-15.2400,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
35028C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Locker Room Hall,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
35028C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
18.8976,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
18.8976,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
18.8976,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
18.8976,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
35051E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 9, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
35051E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
352740, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
352740, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,12.1920,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,12.1920,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
3613B7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
3613B7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
361D65, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
361D65, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,7.9248,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,7.9248,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-0.3048,7.9248,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-0.3048,7.9248,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
368E02, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Cafe, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8FF821, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.7912,-7.6200,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7912,-7.6200,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.7912,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.7912,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
36E420, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
36E420, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
37E2C7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Soil Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
37E2C7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
388F10, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 MRI Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
388F10, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.7432,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
38B339, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Undeveloped 1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
38F548, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Sterile Storage, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
38F548, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.0584,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.0584,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.0584,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.0584,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
390BCF, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Storage 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
390BCF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
3947B8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
3947B8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
39E49D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
39E49D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
3A6904, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 IT Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
3A6904, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
8.5344,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
8.5344,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
3C5322, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
3C5322, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
3C9825, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Conference Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
3C9825, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
3D4DE8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Dictation, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
3D4DE8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,-3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,-3.0480,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
3D7175, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
3D7175, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
7.3152,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
7.3152,9.1440,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
3DE7A6, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
17258E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-4.8768,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.8768,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,-4.8768,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,-4.8768,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
3F71D3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Humid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
3F71D3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
41514F, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Nourishment, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
41514F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-7.9248,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,-7.9248,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
415590, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
415590, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4161C8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Anesthesia, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4161C8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4180E7, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam Hall 4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4180E7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
41CE25, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Soil Hold, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
41CE25, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.6096,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
42CEE1, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam 9, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
42E287, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Scheduling, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
42E287, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,5.1816,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,5.1816,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
42FAB2, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
42FAB2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
430C7E, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Storage 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
430C7E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.9144,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.9144,-2.4384,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
436189, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Conference, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
436189, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.5344,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.5344,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-8.5344,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-8.5344,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4398AD, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Soil, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4398AD, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
43A2A2, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
976E3F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-6.0960,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-6.0960,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
442699, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Clean, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
442699, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,4.2672,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.2672,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
446771, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 PACU, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
446771, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4497EF, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Physical Therapy 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4497EF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-19.8120,6.0960,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-19.8120,6.0960,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-19.8120,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-19.8120,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
44D36C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Physical Therapy Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
44D36C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4507E9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Cafe, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4507E9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.8872,-3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.8872,-3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.7912,-3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.7912,-3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
460DA4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Office Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
460DA4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
462370, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Nurse Station 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
462370, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,-3.0480,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,-3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
46237E, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam Hall 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
46237E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,9.1440,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
46292D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Dressing Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
46292D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
464A53, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Station, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
464A53, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.8392,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.8392,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-8.8392,-2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-8.8392,-2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
46E87C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
46E87C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.2672,1.5240,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.2672,1.5240,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.2672,3.9624,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.2672,3.9624,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4783F2, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Cafe, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4783F2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.7912,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.8872,-10.0584,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.8872,-3.6576,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.7912,-3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
479A9C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
479A9C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
47CE83, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 6, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
47CE83, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.5720,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.5720,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.5720,-4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.5720,-4.5720,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
481E71, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Anesthesia, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
484FB1, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Physical Therapy Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
484FB1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.4864,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4911A5, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4911A5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,-12.8016,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,-12.8016,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,1.5240,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,1.5240,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
491317, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Nurse Station 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
491317, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
49516D, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam 9, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
49516D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,-10.0584,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4979C8, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam Hall 1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
49DA28, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BDE9D9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
49DA86, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Clean Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
49DA86, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.5720,3.3528,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.5720,3.3528,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.5720,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.5720,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4A07CD, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Station, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4A07CD, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.8392,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.8392,-2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4A854B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Dictation, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4A854B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4AB310, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 X-Ray, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4AB310, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-15.2400,-5.4864,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-5.4864,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4ABC66, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,-7.3152,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,-7.3152,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
13.7160,-7.3152,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
13.7160,-7.3152,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4AD319, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4AD319, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4B1439, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Office, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,12.1920,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,12.1920,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4B55FA, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Utility, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4BFCC1, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Locker Room Hall,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4BFCC1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.4384,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
18.8976,-2.4384,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
18.8976,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4C4C25, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Work Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4C4C25, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-1.8288,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4C8372, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam Hall 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4C8372, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4CCA8D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Undeveloped 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4CCA8D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
12.8016,16.4592,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
12.8016,16.4592,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,16.4592,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,16.4592,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4CDC86, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4CDC86, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,-3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4CE123, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4CE123, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-15.2400,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-15.2400,-3.9624,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-15.2400,-3.9624,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4D50C0, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Utility, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4D50C0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,-2.7432,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4DA0F5, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Room 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4DA0F5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4E1563, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Nurse Station 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4E1563, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.9144,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.9144,-3.0480,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,-3.0480,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4E3BB5, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4E3BB5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4E78E0, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam 4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4E78E0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,3.6576,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4EB51A, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Scheduling 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4EB51A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.7912,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-5.4864,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.7912,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4ED109, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4ED109, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,-2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,-2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4EE021, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4EE021, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
4F0CD7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Utility, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
4F0CD7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,-2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,-2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
50DB3D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Reception Toilet,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
50DB3D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
513564, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Scheduling, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
513564, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,5.1816,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.1816,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
529072, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Utility Hall, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-0.6096,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-0.6096,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
52CA89, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Operating Room 3,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
52CA89, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
8.5344,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
8.5344,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.5344,4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.5344,4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
53450D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
53450D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
54D065, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam 1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5507DC, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
NW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.8392,2.4384,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.8392,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-8.8392,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-8.8392,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
55191F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
55191F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
551E65, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Room 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
551E65, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,7.9248,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,7.9248,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5556EE, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 6, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5556EE, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
55BD05, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Physical Therapy 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
55BD05, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.2776,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.2776,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
56C7DA, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Dictation, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
56C7DA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-3.0480,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,-3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
573330, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
SW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C1B522, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.8768,-2.4384,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.8768,-2.4384,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.8768,0.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.8768,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
575A7B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Operating Room 1,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
575A7B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.7912,7.0104,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7912,7.0104,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-0.3048,7.0104,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-0.3048,7.0104,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
577A10, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Office Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
577A10, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,22.5552,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,22.5552,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
577E2E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
577E2E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
577FC1, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Med Gas, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
58A74A, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Soil Hold, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
58A74A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,2.4384,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,2.4384,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
58AD84, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Storage 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
58AD84, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
58B6B6, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nourishment, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
58B6B6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,-7.9248,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,-7.9248,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
596DE0, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
596DE0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,-0.3048,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,-0.3048,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,-0.3048,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,-0.3048,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
59E0E4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Clean, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
59E0E4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5A39B1, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5A39B1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,7.6200,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,7.6200,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5ADC59, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Office, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-22.5552,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-22.5552,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5B04CF, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-4.8768,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-4.8768,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5B255F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Room 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5B255F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.9144,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.9144,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5B736E, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5B736E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-2.1336,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5C7E1E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5C7E1E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5CB500, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 MRI Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5CB500, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.1336,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,-2.1336,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,-0.3048,3.0480, !- X,Y,Z ==> Vertex 4 {m}
|
|
3.6576,-0.3048,3.0480, !- X,Y,Z ==> Vertex 5 {m}
|
|
3.6576,0.9144,3.0480, !- X,Y,Z ==> Vertex 6 {m}
|
|
0.9144,0.9144,3.0480, !- X,Y,Z ==> Vertex 7 {m}
|
|
0.9144,0.0000,3.0480; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5CD67D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5CD67D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5D199F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Soil, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5D199F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5D2769, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam 9, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5D2769, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,-10.0584,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5D8FAF, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5D8FAF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5DACB5, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Dressing Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5DACB5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.5240,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.7432,-1.5240,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5DBD9D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Nurse Station 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5DBD9D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-3.0480,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,-3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,-3.0480,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5E657E, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5EAFB3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Elevator Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DF47AC, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5EB34C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5EB34C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5F697A, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Utility Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5F697A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,-2.1336,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5F762C, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Cafe, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.7912,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7912,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.8872,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.8872,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
5FDFAE, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5FDFAE, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-28.0416,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-28.0416,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
60F634, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6F0E5D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.4864,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
-5.4864,0.0000,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.2192,0.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.2192,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
612A96, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Scheduling, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
612A96, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.1816,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.1816,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
619EE6, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Clean Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
619EE6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.3528,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.3528,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
61E610, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Sub-Sterile, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
62475F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
62475F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.0960,5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.0960,5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.0960,2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
624E8A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Treatment, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
624E8A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,16.4592,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,16.4592,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.0960,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.0960,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
628387, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Humid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
628387, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-5.4864,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
637F6F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 X-Ray, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
637F6F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-15.2400,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-15.2400,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-15.2400,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
63B825, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Storage 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
63B825, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
640E64, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
640E64, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
65AB67, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam 5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
65AB67, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,7.6200,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,7.6200,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
66B6F7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Recovery Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
66B6F7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
18.8976,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
18.8976,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
18.8976,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
18.8976,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6713DA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6713DA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
673317, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Procedure Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
673317, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.3048,-4.5720,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.3048,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,-4.5720,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
67BF89, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
67BF89, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
7.0104,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
7.0104,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
680AA1, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
680AA1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,-3.0480,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,-3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-3.0480,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
685FFA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 9, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
685FFA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
68A2D7, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
7.0104,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
7.0104,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
68F53B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
68F53B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.4384,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.4384,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
695D6E, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Storage 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
695D6E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,2.4384,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6975B0, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Reception Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6975B0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.8768,2.4384,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.8768,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6A2DCE, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 8, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6A2DCE, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,-4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,-4.5720,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6B31A8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Cafe, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6B31A8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.8872,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.8872,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.8872,-3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.8872,-3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6C68C2, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Mechanical, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6C68C2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6C95E7, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam Hall 3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6CC177, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Work Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6D2616, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Procedure Room, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.3048,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.3048,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6D960C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Lounge Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6D960C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,4.8768,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.8768,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6E46A9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6E46A9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-20.1168,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-20.1168,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.4384,-20.1168,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.4384,-20.1168,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6EA05E, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Physical Therapy 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6EA05E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-4.8768,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.2776,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.2776,-4.8768,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6EA718, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6EA718, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,14.6304,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,14.6304,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6EC372, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Storage 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6EC372, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6ED237, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6ED237, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6EE166, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B2F07D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-7.3152,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
-7.3152,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6F0E5D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Mechanical, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
60F634, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.6200,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,7.6200,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,7.6200,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,7.6200,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6F1456, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Undeveloped 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6F1456, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
15.8496,4.8768,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.8496,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
0.0000,4.8768,0.0000; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6FB351, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6FB351, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,3.9624,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,3.9624,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
6FCE5C, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6FCE5C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
7.3152,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
7.3152,9.1440,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7008C0, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Scrub, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7008C0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,-4.2672,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
703D3E, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Utility, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
703D3E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,-2.7432,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
704EC3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Procedure Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
704EC3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.3048,-4.5720,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.3048,-4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.3048,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.3048,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
707E04, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Storage, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
707E04, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.6096,-7.0104,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,-7.0104,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
70C0BF, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Storage 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
70C0BF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
70DAD1, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Bio Haz, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
70DAD1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.6096,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7149EA, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Conference Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7149EA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
71A3C4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Dressing Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
71A3C4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
726F67, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Operating Room 2,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
726F67, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,7.3152,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.0960,7.3152,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
72A819, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
72A819, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.0960,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.0960,-3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,-3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
72BCFE, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Med Gas, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
72BCFE, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
72C4ED, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Recovery Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
72C4ED, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
18.8976,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
18.8976,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.1816,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.1816,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
738F37, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
738F37, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-42.3672,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-42.3672,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
73E892, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
73E892, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,1.5240,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,1.5240,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.2672,1.5240,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.2672,1.5240,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
74AB49, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
92A2CB, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.4008,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.4008,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.5240,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.5240,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
75353D, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Conference, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
75353D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.5344,3.6576,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-8.5344,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
758B3C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Humid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
758B3C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
761D33, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
761D33, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7620CF, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7620CF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,-3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,-3.0480,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
762874, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 X-Ray, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
762874, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
762F8C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Soil, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
762F8C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,-4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
76F2F2, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Sub-Sterile, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
76F2F2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
772842, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Conference Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
772842, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7816FD, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Scrub, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7816FD, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,-4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,-4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7949FA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Clean, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7949FA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
79D0A5, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Elevator Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
79D0A5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7A03ED, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 8, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7A03ED, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.4864,-4.5720,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-5.4864,-4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-4.5720,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7A3F36, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Reception Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7A3F36, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
26.5176,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
26.5176,1.8288,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7AE5B9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Room 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7AE5B9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,7.9248,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,7.9248,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.2192,7.9248,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.2192,7.9248,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7B1677, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Locker Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7B1677, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.7056,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.7056,-9.1440,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7B67EC, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7B67EC, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-0.3048,0.9144,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.3048,0.9144,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,0.9144,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,0.9144,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7B9EEC, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7B9EEC, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7C0F83, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7DCAF1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-7.0104,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
-7.0104,0.0000,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.5240,0.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.5240,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7C84B6, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7C84B6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7D08C0, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7D08C0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7DB101, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Utility Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7DB101, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.0960,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.4864,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7DCAF1, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7C0F83, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-22.5552,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-22.5552,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-28.0416,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-28.0416,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7E0561, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7E0561, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-0.3048,7.9248,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.3048,7.9248,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-0.3048,0.9144,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-0.3048,0.9144,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7F5C82, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Electrical Room, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
7F6FC2, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D699FF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
803791, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 MRI Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
803791, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-0.9144,-6.7056,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1816,-6.7056,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.1816,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-0.9144,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
808817, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Sterile Storage, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
808817, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.0584,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.0584,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
809229, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Step Down, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
809229, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.1816,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1816,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.1816,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.1816,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8134C2, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8134C2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.6096,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8144C0, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Sterile Storage, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8144C0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.0584,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.0584,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
815D63, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
815D63, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
816C9F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 X-Ray, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
816C9F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-15.2400,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-15.2400,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
816F6D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
816F6D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8177BA, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
822161, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FA9233, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.2672,3.9624,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.2672,3.9624,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,3.9624,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,3.9624,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
82303C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Locker, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
82303C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,3.0480,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
824665, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
824665, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,-0.3048,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,-0.3048,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
824F52, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
824F52, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
7.0104,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
7.0104,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
7.0104,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
7.0104,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
825233, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
825233, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-16.1544,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-16.1544,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
827528, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Elevator Pump Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
827528, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.9624,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.9624,-2.1336,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
830326, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
830326, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8316C5, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Office Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8316C5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8364DC, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam 7, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8364DC, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-7.3152,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.3152,-10.0584,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
839A66, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Reception Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
839A66, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.8768,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.8768,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
83A098, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Operating Room 1,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
83A098, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-0.3048,7.0104,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.3048,7.0104,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-0.3048,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-0.3048,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
83B6E3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
83B6E3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
84418A, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Pre-Op Room 1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
84FB73, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Dressing Room, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
850EA7, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
SW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.2192,-2.4384,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.2192,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.8768,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.8768,-2.4384,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
852027, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Locker Room Hall,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
852027, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
855B07, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Undeveloped 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
855B07, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
15.8496,4.8768,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.8496,4.8768,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.8768,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.8768,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8594D3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Dictation, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8594D3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
859BC1, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Storage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.6096,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-11.5824,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-11.5824,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
86244A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Dictation, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
86244A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
867BBB, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
867BBB, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-0.9144,-6.7056,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.9144,-6.7056,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.1816,-6.7056,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.1816,-6.7056,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
869ED5, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Office Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
869ED5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
42.3672,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
42.3672,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
42.3672,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
42.3672,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
86A0D7, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
86A0D7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
86A28D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
86A28D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-16.1544,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-16.1544,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-16.1544,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-16.1544,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
86E9C2, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
86E9C2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
13.7160,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
13.7160,-7.3152,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,-7.3152,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
3.6576,-4.8768,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
0.0000,-4.8768,0.0000; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
874DF8, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Office Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
874DF8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,22.5552,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,22.5552,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
879583, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Operating Room 1,!- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-0.3048,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.3048,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.7912,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.7912,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
87BFF8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Scheduling 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
87BFF8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.7912,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-5.7912,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.7912,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.7912,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
87BFF9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
87BFF9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.0960,2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.0960,2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
88A75F, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam 4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
88CB69, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
88CB69, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
88D2F8, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Soil, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
88D2F8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.2672,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,-4.2672,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
88E360, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,2.1336,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-7.3152,2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.3152,2.1336,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
897BAF, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
897BAF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
89A685, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Storage 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
89A685, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
89BBEB, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
89BBEB, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8A30DD, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8A30DD, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,-0.3048,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,-0.3048,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,0.9144,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,0.9144,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8A5790, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Dictation, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8A5790, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8BB36F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Humid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8BB36F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.7432,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8BCB23, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Physical Therapy 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8BCB23, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.2776,-4.8768,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.2776,-4.8768,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.2776,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.2776,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8C3884, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Room 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8C3884, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.2192,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.2192,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8C4550, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8C4550, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8C4FA5, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Sterile Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8C4FA5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.4384,23.4696,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.4384,23.4696,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,23.4696,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,23.4696,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8CA0BF, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam Hall 2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8D03E8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Locker Room Hall,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8D03E8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
18.8976,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
18.8976,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8D1659, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BEDECA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-15.8496,-3.9624,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-15.8496,-3.9624,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-15.8496,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-15.8496,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8D1BC4, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Reception Hall, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
26.5176,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
26.5176,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8DA7DB, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Undeveloped 1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
12.8016,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
12.8016,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8E1DCD, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Storage 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8E1DCD, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8E5BB9, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Storage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-11.5824,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-11.5824,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-11.5824,-7.0104,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-11.5824,-7.0104,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8F966C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Room 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8F966C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.9144,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.9144,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
8FF821, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
SW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
368E02, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.8768,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.8768,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.8768,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.8768,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
906F5E, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
906F5E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,9.1440,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
90FDA9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
90FDA9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.9144,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.9144,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
910B03, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Work Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
910B03, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-42.3672,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-42.3672,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
917AB5, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam 6, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
917AB5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.5720,-4.5720,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.5720,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.5720,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
91DE28, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
91DE28, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
92A2CB, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Control Room,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
74AB49, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.5240,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.5240,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.4008,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.4008,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
92E22C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Locker Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
92E22C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.7056,-4.5720,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.7056,-4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.7056,-9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.7056,-9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
942718, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 6, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
942718, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
94A56A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Dictation, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
94A56A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
95486C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Procedure Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
95486C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,-4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,-4.5720,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
957242, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Work Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
957242, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,1.8288,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-42.3672,1.8288,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-42.3672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
958E3F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Physical Therapy 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
958E3F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-4.8768,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.8768,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.2776,-4.8768,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.2776,-4.8768,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9621FD, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam 8, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
962DB5, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Locker Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
962DB5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
96662A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Sterile Storage, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
96662A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
966665, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Operating Room 3,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
966665, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
8.5344,4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
8.5344,4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.5344,5.1816,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.5344,5.1816,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
969F22, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Scheduling 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
969F22, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.7912,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.7912,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
97616F, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Pre-Op Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
97616F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-1.8288,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
976E3F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NW Elevator, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
43A2A2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,-6.0960,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,-6.0960,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
97B688, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Utility, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
97B688, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,-2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
97BB21, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
97BB21, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
97F00A, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam 2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9853A2, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Room 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9853A2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.2192,7.9248,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.2192,7.9248,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.2192,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.2192,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
986A05, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C1C64E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-7.3152,2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-7.3152,2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-7.3152,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.3152,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9879B2, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Electrical Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9879B2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9926F7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Elevator Pump Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9926F7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
99468F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
SW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FCDEAC, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.8768,-2.4384,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.8768,-2.4384,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.8768,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.8768,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
995832, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 PACU, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
995832, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,-2.7432,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.7432,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9969B3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9969B3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
997723, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Step Down, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.1816,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.1816,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9A5B84, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 IT Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9A5B84, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.5240,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
8.5344,-1.5240,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.5344,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9A776E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Soil Hold, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9A776E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.6096,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9AB92B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Lounge Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9AB92B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9ABA5B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Soil Hold, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9ABA5B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9AC2BE, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Dressing Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9AC2BE, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,1.8288,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9AC2E9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Conference, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9AC2E9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-8.5344,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-8.5344,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9BA592, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NW Elevator, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D5E94D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,0.0000,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9BB388, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Lobby Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9BB388, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9C0202, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9C0202, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9C3A6A, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Work, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.7056,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.7056,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9C568B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Scheduling 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9C568B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9C6F66, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Operating Room 2,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9C6F66, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.3152,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,7.3152,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.0960,7.3152,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,7.3152,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9D87EC, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Lobby Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9DB411, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Scrub, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9DB411, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,-4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,-4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9E12D4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Operating Room 3,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9E12D4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.1816,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.1816,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9E6B6C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9E6B6C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9EADD8, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Nurse Station 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9EADD8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,-3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9EC269, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam 6, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.5720,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.5720,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9FBDA3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Scheduling 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9FBDA3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.7912,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-5.7912,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9FF31D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9FF31D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
9FF92B, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam Hall 6, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9FF92B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,-10.0584,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A02892, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A02892, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
4.5720,7.6200,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,14.6304,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,14.6304,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 4 {m}
|
|
6.0960,0.0000,3.0480, !- X,Y,Z ==> Vertex 5 {m}
|
|
6.0960,7.6200,3.0480; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A1087A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Soil Hold, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A1087A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A11DA8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Mechanical Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A11DA8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.3152,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,7.3152,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,22.5552,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,22.5552,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A168ED, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Storage 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A168ED, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.9144,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.9144,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.9144,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.9144,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A28F01, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
204CB9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-7.3152,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-7.3152,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.2192,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.2192,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A2AAC5, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Operating Room 2,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A2AAC5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.0960,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A3E3D6, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Storage 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A3E3D6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,2.4384,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A497E9, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam 3, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
7.3152,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
7.3152,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A49FCC, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Nurse Station 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A49FCC, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-3.0480,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A4B378, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Med Gas, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A4B378, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A4BE81, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A4BE81, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,9.1440,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A524F1, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A524F1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-3.0480,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A59907, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nourishment, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A59907, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-7.9248,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-7.9248,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,-7.9248,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,-7.9248,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A5A6A3, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A6D45E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A6D45E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.0960,-3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.0960,-3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A78253, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A78253, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.1816,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1816,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-0.3048,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-0.3048,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A7F46C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Humid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A7F46C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.7432,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A8A4FA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A8A4FA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,12.1920,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,12.1920,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,12.1920,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,12.1920,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A8DB72, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A8DB72, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,0.9144,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,0.9144,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.9144,0.9144,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.9144,0.9144,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A8FC82, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 6, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
16BE00, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A9A1F6, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam 8, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A9A1F6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,-4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
A9C27A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Locker Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
A9C27A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.7056,-9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.7056,-9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AA1709, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Vestibule, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
AA1709, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AA26DE, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
AA26DE, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
7.0104,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
7.0104,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AAD404, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Humid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
AAD404, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AAF377, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
AAF377, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,12.1920,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,12.1920,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AB4E10, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
AB4E10, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
13.7160,-7.3152,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
13.7160,-7.3152,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
13.7160,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
13.7160,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AC05CF, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Storage 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
AC05CF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AC74DB, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Physical Therapy 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
AC74DB, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-19.8120,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-19.8120,6.0960,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.0960,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AC956A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
AC956A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,7.6200,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,7.6200,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ACADA4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Soil, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ACADA4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ACB61B, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ACB61B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-15.8496,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-15.8496,-3.9624,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
-15.2400,-3.9624,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
-15.2400,0.0000,0.0000; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ADB8D0, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 MRI Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ADD799, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ADD799, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AE206C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Operating Room 3,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
AE206C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
8.5344,5.1816,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
8.5344,5.1816,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.1816,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.1816,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AE702D, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Pre-Op Room 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
AE702D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,7.9248,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.2192,7.9248,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.2192,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AEA170, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Locker, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
AEA170, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AEF992, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Conference, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.5344,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.5344,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AF0124, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
NW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.5240,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.5240,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.5240,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.5240,2.4384,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
AF27F8, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Dictation, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
AF27F8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,4.2672,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.2672,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B04C98, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Reception Toilet,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B04C98, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B1856A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Locker, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B1856A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.0480,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,3.0480,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B2F07D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Office Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
6EE166, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,22.5552,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,22.5552,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,22.5552,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,22.5552,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B316F7, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam 7, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-7.3152,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.3152,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B352F7, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B352F7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-3.0480,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,-3.0480,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B35AD6, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Office Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B3A518, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Sterile Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B3A518, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,23.4696,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,23.4696,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B40F89, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Step Down, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B45B50, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Elevator Pump Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B45B50, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.9624,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.9624,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B46F2C, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Lounge Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B46F2C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,4.8768,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.8768,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B4E619, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam 5, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,7.6200,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,7.6200,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B4F89F, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam Hall 6, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B4F89F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,-10.0584,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B51929, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 9, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B51929, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B551AD, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Clean Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B551AD, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.5720,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.5720,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B5E37D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B5E37D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-15.2400,-3.9624,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-15.2400,-3.9624,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-15.8496,-3.9624,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-15.8496,-3.9624,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B76374, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Scheduling 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B76374, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.4864,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-5.4864,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B840A7, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B840A7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B92155, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B92155, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.4384,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.4384,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B972D4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B972D4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-28.0416,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-28.0416,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-28.0416,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-28.0416,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
B9D6E3, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam Hall 5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
B9D6E3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BA91C7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BA91C7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.1816,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1816,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.1816,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.1816,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BABBB4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BABBB4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.4384,-20.1168,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.4384,-20.1168,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.4384,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BAD27A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
1068C8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-12.8016,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-12.8016,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,-12.8016,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,-12.8016,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BADB96, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Storage 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BADB96, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BB097B, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Clean Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BB097B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.3528,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.5720,3.3528,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.5720,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BBEE0B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Bio Haz, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BBEE0B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BC25F3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BC25F3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BC2C22, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Mechanical Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D68874, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,22.5552,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,22.5552,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,22.5552,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,22.5552,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BC6EE7, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Pre-Op Room 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BC6EE7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.9144,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.9144,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BD4B70, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Nurse Station, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BD4B70, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.8392,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.7432,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-8.8392,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BDC047, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Scheduling, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BDC047, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,5.1816,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,5.1816,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.1816,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.1816,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BDE9D9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NW Elevator, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
49DA28, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BE5F2F, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Undeveloped 2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,4.8768,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.8768,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BEDECA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NW Elevator, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
8D1659, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,-6.0960,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,-6.0960,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BF7411, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Physical Therapy Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BF7411, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BFA29B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DE6295, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.6200,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,7.6200,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,7.6200,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,7.6200,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BFB8E1, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BFB8E1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-12.8016,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,-12.8016,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,1.5240,3.0480, !- X,Y,Z ==> Vertex 4 {m}
|
|
4.2672,1.5240,3.0480, !- X,Y,Z ==> Vertex 5 {m}
|
|
4.2672,3.9624,3.0480, !- X,Y,Z ==> Vertex 6 {m}
|
|
1.8288,3.9624,3.0480, !- X,Y,Z ==> Vertex 7 {m}
|
|
1.8288,1.8288,3.0480, !- X,Y,Z ==> Vertex 8 {m}
|
|
0.6096,1.8288,3.0480, !- X,Y,Z ==> Vertex 9 {m}
|
|
0.6096,0.0000,3.0480; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
BFD4BB, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Control Room,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BFD4BB, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.4008,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.4008,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.4008,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.4008,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C050FD, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Undeveloped 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C050FD, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
12.8016,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
12.8016,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
12.8016,16.4592,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
12.8016,16.4592,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C0697F, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam 4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C0697F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,3.6576,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C0F51F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nourishment, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C0F51F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C114C1, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 MRI Control Room,!- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.5240,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.5240,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C1AD55, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Elevator Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C1AD55, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.0480,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.0480,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.0480,-3.9624,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.0480,-3.9624,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C1B522, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Undeveloped 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
573330, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C1BC97, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Physical Therapy 1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-19.8120,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-19.8120,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C1C64E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
986A05, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-0.6096,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-0.6096,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C2156D, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam Hall 4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C2156D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,-10.0584,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C2CE5F, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Conference Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C2CE5F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C34217, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Vestibule, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C34217, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-2.4384,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C39FCC, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C39FCC, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.8768,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,-4.8768,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,-7.3152,3.0480, !- X,Y,Z ==> Vertex 4 {m}
|
|
13.7160,-7.3152,3.0480, !- X,Y,Z ==> Vertex 5 {m}
|
|
13.7160,0.0000,3.0480; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C3FB92, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Humid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C3FB92, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C45BF3, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Nurse Station 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C45BF3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-3.0480,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,-3.0480,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C48E94, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Cafe, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C48E94, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.7912,-3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7912,-3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.7912,-7.6200,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.7912,-7.6200,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C4A89B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C4A89B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C51FD6, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Reception Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C51FD6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,1.8288,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
26.5176,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
26.5176,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C52EE0, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Work, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-14.0208,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-14.0208,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-15.2400,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-15.2400,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C5EA55, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam Hall 6, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C5ECA6, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Recovery Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C5ECA6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.1816,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
18.8976,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
18.8976,3.6576,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.1816,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C732B0, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Elevator Pump Room, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.9624,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.9624,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C732D4, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 IT Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C732D4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,-2.4384,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C75191, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Nurse Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C75191, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-16.1544,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-16.1544,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C78153, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Treatment, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C78153, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,6.0960,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,6.0960,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.2672,6.0960,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.2672,6.0960,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C7B7AA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C7B7AA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C86329, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Work, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-12.4968,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-12.4968,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C86932, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Locker, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C86932, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.0480,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C92A6E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C92A6E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C9D24D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C9D24D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,-2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
C9F74B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Storage 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
C9F74B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CA45DE, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Step Down, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CA45DE, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.1816,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1816,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CA6EDA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CA6EDA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,-2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,-2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CA9485, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Reception Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CA9485, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CA9655, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Soil Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CA9655, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.5720,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.5720,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.5720,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.5720,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CADDAF, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Scheduling 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CADDAF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CBB2D7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Nurse Station 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CBB2D7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.9144,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.9144,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.9144,-3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.9144,-3.0480,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CC17E8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Dressing Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CC17E8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.7432,-1.5240,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.7432,-1.5240,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-1.5240,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-1.5240,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CC4EB4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Office Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CC4EB4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CC8990, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Office Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CC8990, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
42.3672,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
42.3672,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CD21EC, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Physical Therapy Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CD21EC, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CD7BAD, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Reception Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CD7BAD, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.8768,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.8768,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CDD69A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Mechanical Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CDD69A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,7.3152,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,7.3152,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,7.3152,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,7.3152,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CE3FEF, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Lounge Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,4.8768,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,4.8768,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.8768,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.8768,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CE4555, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CE4555, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CE618F, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Mechanical, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,7.6200,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,7.6200,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CEC7BD, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Sterile Hall, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.4384,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
CF2803, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Utility, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
CF2803, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,-3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,-3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D0731B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Nurse Station 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D0731B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.9144,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.9144,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D0C6E8, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Office Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D0C6E8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D10EC7, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Locker, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D10EC7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.0480,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,3.0480,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D13E00, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Treatment, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D13E00, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.2672,16.4592,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.2672,16.4592,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,16.4592,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,16.4592,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D197DA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D197DA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D1A180, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D1A180, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,12.1920,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,12.1920,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D21333, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Humid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D21333, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.7432,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D22917, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Physical Therapy 1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.0960,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.0960,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D2C53A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Control Room,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D2C53A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D2E9BA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
EEFDE3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
7.0104,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
7.0104,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
7.0104,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
7.0104,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D37566, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 6, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D37566, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D4A2A4, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam Hall 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D4A2A4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D4C22E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Storage 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D4C22E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D4F411, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Office Hall, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D5C4E5, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Undeveloped 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E2AFEB, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D5E94D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Office Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
9BA592, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D6005B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Treatment, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D6005B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.2672,10.9728,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.2672,10.9728,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.2672,16.4592,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.2672,16.4592,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D60B94, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Lobby Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D60B94, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.0960,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.0960,-3.6576,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-3.6576,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D61127, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Sub-Sterile, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D61127, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D67C59, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Mechanical, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D67C59, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,7.6200,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,7.6200,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D68874, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BC2C22, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-7.3152,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
-7.3152,0.0000,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,0.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D699FF, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NW Elevator, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
7F6FC2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D6F20A, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Elevator Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D6F20A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
-3.0480,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,-10.0584,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
-3.6576,-3.9624,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
-3.0480,-3.9624,0.0000; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D75504, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Office Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D75504, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
42.3672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
42.3672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D7AC92, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Electrical Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D7AC92, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.1336,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,2.1336,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D7DC8D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 8, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D7DC8D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-4.5720,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D88779, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D88779, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D95F04, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Utility Room, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D9965C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Locker Room Hall,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D9965C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
18.8976,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
18.8976,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
D9F81F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D9F81F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DA6040, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DA6040, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DA760E, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam 8, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DA760E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-4.5720,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,-4.5720,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DB7F62, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Scheduling 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DB7F62, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DD2E2D, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DDCF3E, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Anesthesia, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DDCF3E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,3.6576,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DE027F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Dressing Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DE027F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.7432,-1.5240,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.7432,-1.5240,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DE6295, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
BFA29B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.4864,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
-5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.2192,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.2192,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DE64CC, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Storage 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DE64CC, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DF3AA3, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Office, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DF3AA3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,0.9144,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,7.9248,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-0.3048,7.9248,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-0.3048,0.9144,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DF47AC, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
5EAFB3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.8392,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.8392,0.0000,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
-7.0104,0.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.0104,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DF5076, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Utility, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DF5076, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,-3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DF91E0, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DF91E0, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DFA16C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Office Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DFA16C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,22.5552,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,22.5552,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DFA4B1, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DFA4B1, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
7.3152,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
7.3152,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DFC6F0, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.1336,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
DFDE4F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Station, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
DFDE4F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-8.8392,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-8.8392,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E02487, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Elevator Pump Room, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.9624,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.9624,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.9624,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.9624,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E0C0A7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E0C0A7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E0C60A, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam Hall 5, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E0C60A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,-10.0584,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E0CB0D, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Elevator Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F9DFA4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,-3.9624,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,-3.9624,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E0D6E9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Storage 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E0D6E9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E0FD95, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Lounge Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E0FD95, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,4.8768,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,4.8768,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E11109, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Exam Hall 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E11109, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E13FC4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Humid, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E13FC4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E1B4BB, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E1B4BB, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E1B973, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Dictation, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E1B973, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,-3.0480,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-3.0480,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E26130, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam Hall 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E26130, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E2AFEB, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
SW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D5C4E5, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.8768,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.8768,0.0000,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.2192,0.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.2192,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E321D9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E321D9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E326E4, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Operating Room 1,!- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.7912,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7912,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.7912,7.0104,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.7912,7.0104,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E55935, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F41621, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.7056,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.7056,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-14.0208,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-14.0208,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E5BC3F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E5BC3F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-0.9144,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.9144,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-0.9144,-6.7056,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-0.9144,-6.7056,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E5CB03, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E5CB03, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,-2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E608B9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E608B9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
4.5720,14.6304,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,14.6304,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,14.6304,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,14.6304,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E63515, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Reception Toilet,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E63515, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E648BC, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Operating Room 1,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E648BC, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-0.3048,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7912,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.7912,7.0104,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-0.3048,7.0104,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E77E00, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Sterile Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E77E00, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.4384,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.4384,23.4696,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.4384,23.4696,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E7A265, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E7A265, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,-12.4968,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,-12.4968,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-12.4968,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-12.4968,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E7B55F, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.2192,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.2192,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E7EC3B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam Hall 4, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E7EC3B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E82152, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Electrical Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E82152, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E85BB5, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Med Gas, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E88E01, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E88E01, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-15.8496,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-15.8496,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E89C6C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E89C6C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E9AEFF, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam Hall 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E9AEFF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E9B121, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 2 Scheduling 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E9B121, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.7912,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.7912,-5.4864,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E9C76F, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Reception Toilet,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E9C76F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
E9F3F6, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Locker Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E9F3F6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.7056,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.7056,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.7056,-4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.7056,-4.5720,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
EA4A9E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Physical Therapy Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
EA4A9E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
EA6DC8, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Scheduling, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
EA8FA7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Clean, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
EA8FA7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
EAD1EA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
EAD1EA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-42.3672,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-42.3672,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
EAE60F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Procedure Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
EAE60F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.4864,-4.5720,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-5.4864,-4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.3048,-4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.3048,-4.5720,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
EC28A9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
EC28A9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.0960,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ECDEDB, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Nurse Station 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ECDEDB, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.9144,-3.0480,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.9144,-3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,-3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,-3.0480,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ED1C1D, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Storage 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ED1C1D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,2.4384,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ED1D7F, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Nurse Station 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ED1D7F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,-3.0480,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,-3.0480,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
ED650B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Storage 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
ED650B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.9144,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.9144,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
EEFDE3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
D2E9BA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-7.3152,2.1336,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
-7.3152,2.1336,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
-7.3152,0.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.3152,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
EFFB3B, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
EFFB3B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,-12.4968,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,-12.4968,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F07866, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Office Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F07866, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,1.8288,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F0AF69, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Reception Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F0AF69, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
26.5176,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
26.5176,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F0B690, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Control Room,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F0B690, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.4008,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.4008,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F0D8EE, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Exam 7, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F0D8EE, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-7.3152,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.3152,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F0E4AA, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Pre-Op Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F0E4AA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-20.1168,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.4384,-20.1168,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.4384,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F209CC, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 2 Exam Hall 4, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F22E15, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Work Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F22E15, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F23BF4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 3, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F23BF4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,9.1440,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F23EB6, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F23EB6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F2515C, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Dressing Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F2515C, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F29458, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 6, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F29458, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.5720,-4.5720,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.5720,-4.5720,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-4.5720,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F3084E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 MRI Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F3084E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-0.3048,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.3048,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-0.9144,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-0.9144,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F3F6EA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Physical Therapy 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F3F6EA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,6.0960,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,6.0960,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-19.8120,6.0960,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-19.8120,6.0960,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F41621, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E55935, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.8392,0.0000,6.0960, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.8392,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.5240,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.5240,0.0000,6.0960; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F43F35, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Utility Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F43F35, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F4D6DD, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 IT Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F4D6DD, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
8.5344,-1.5240,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
8.5344,-1.5240,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.5344,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.5344,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F4FE92, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Recovery Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F4FE92, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.1816,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1816,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.1816,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.1816,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F5E7FE, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Mechanical Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F5E7FE, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,22.5552,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,22.5552,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,7.3152,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,7.3152,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F629C1, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Locker Room, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.7056,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.7056,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F631E4, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Scheduling 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F631E4, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-5.4864,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F6D879, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Conference Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F6D879, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,-2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F6DDE6, !- Name
|
|
Floor, !- Surface Type
|
|
INT-FLOOR-TOPSIDE, !- Construction Name
|
|
Floor 3 Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F6DDE6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-12.4968,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,-12.4968,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F6E6D8, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F6E6D8, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.1336,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,-2.1336,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F6E717, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Storage 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F6E717, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F6F6C6, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Bio Haz, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F6F6C6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,2.4384,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,2.4384,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F740DF, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 PACU, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F740DF, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,-2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F77E4B, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F77E4B, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
-15.8496,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-15.2400,0.0000,3.0480, !- X,Y,Z ==> Vertex 4 {m}
|
|
-15.2400,-3.9624,3.0480, !- X,Y,Z ==> Vertex 5 {m}
|
|
-15.8496,-3.9624,3.0480; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F7D24D, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Elevator Hall, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.0480,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.0480,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F7F8BA, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Lobby Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F7F8BA, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F85F32, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Utility Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F85F32, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-0.6096,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,-0.6096,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,-5.4864,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F8F69A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Undeveloped 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F8F69A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,16.4592,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,16.4592,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,9.1440,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F951A6, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Bio Haz, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F951A6, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.6096,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F976A9, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 7, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F976A9, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-7.3152,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-7.3152,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F9B592, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F9B592, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.4384,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F9DFA4, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NW Elevator, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
E0CB0D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,-6.0960,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,-6.0960,6.0960, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,0.0000,6.0960, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
F9FB5A, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Soil Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
F9FB5A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.5720,3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.5720,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FA21EE, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Pre-Op Room 1, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FA21EE, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.9144,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.9144,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.9144,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.9144,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FA769A, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 IT Room, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FA769A, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.6096,-2.4384,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FA9233, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
NW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
822161, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.8392,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.8392,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.4008,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.4008,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FB3814, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
NW Elevator, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-6.0960,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-6.0960,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,-6.0960,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,-6.0960,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FB63A7, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Elevator Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FB63A7, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.0480,-3.9624,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.0480,-3.9624,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,-3.9624,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,-3.9624,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FB87D3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 IT Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FB87D3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-1.5240,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-1.5240,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FBDD49, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 1 Step Down, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FBDD49, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1816,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.1816,3.6576,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FC22D1, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 3 Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FC3B6D, !- Name
|
|
Ceiling, !- Surface Type
|
|
INT-FLOOR-UNDERSIDE, !- Construction Name
|
|
Floor 2 Work Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FC3B6D, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-1.8288,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FCD12D, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
NW Elevator, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-6.0960,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-6.0960,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FCD8D2, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 PACU, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FCD8D2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,-2.7432,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,-2.7432,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FCDEAC, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
99468F, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,-4.8768,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,-4.8768,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,-7.3152,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,-7.3152,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FD0958, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Operating Room 3,!- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FD0958, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.5344,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.5344,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FD8CF2, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Clean Work, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FD8CF2, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.3528,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.3528,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.5720,3.3528,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.5720,3.3528,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FE2C3E, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Reception Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FE2C3E, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.4384,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FE5062, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Nurse Station, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FE5062, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.7432,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FE5A3C, !- Name
|
|
Wall, !- Surface Type
|
|
Steel Frame Non-res Ext Wall, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-6.0960,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-6.0960,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-12.8016,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-12.8016,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FE5F03, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 3 Storage 2, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FE5F03, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FE7511, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 Clean, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FE7511, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FEC1E3, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 1 IT Hall, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FEC1E3, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.5240,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-1.5240,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.5344,-1.5240,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.5344,-1.5240,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
FF8B08, !- Name
|
|
Wall, !- Surface Type
|
|
int-walls, !- Construction Name
|
|
Floor 2 Exam 7, !- Zone Name
|
|
, !- Space Name
|
|
Surface, !- Outside Boundary Condition
|
|
FF8B08, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Anesthesia Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Anesthesia, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,3.6576,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Bio Haz Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Bio Haz, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,2.4384,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,2.4384,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Cafe Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Cafe, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
11.8872,-10.0584,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7912,-10.0584,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.7912,-3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.8872,-3.6576,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Clean Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Clean, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,4.2672,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Clean Work Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Clean Work, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.5720,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.5720,3.3528,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.3528,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Dictation Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Dictation, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,4.2672,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.2672,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Dressing Room Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Dressing Room, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-1.5240,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.7432,-1.5240,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.7432,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Electrical Room Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Electrical Room, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,2.1336,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,2.1336,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Elevator Pump Room Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Elevator Pump Room, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.9624,-2.1336,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.9624,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.1336,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Humid Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Humid, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.7432,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 IT Hall Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 IT Hall, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.5240,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.5344,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.5344,-1.5240,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 IT Room Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 IT Room, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.6096,-2.4384,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Lobby Hall Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Lobby Hall, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.0960,-3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Lobby Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Lobby, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
10, !- Number of Vertices
|
|
3.6576,-12.8016,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-12.8016,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
0.6096,1.8288,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
1.8288,1.8288,0.0000, !- X,Y,Z ==> Vertex 6 {m}
|
|
1.8288,3.9624,0.0000, !- X,Y,Z ==> Vertex 7 {m}
|
|
4.2672,3.9624,0.0000, !- X,Y,Z ==> Vertex 8 {m}
|
|
4.2672,1.5240,0.0000, !- X,Y,Z ==> Vertex 9 {m}
|
|
3.6576,1.5240,0.0000; !- X,Y,Z ==> Vertex 10 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Lobby Toilet Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Lobby Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Locker Room Hall Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Locker Room Hall,!- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.4384,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
18.8976,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
18.8976,-2.4384,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Locker Room Slab,!- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Locker Room, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.7056,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.7056,-9.1440,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Lounge Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.1440,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,9.1440,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 MRI Control Room Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 MRI Control Room,!- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.4008,-2.4384,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.4008,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.4384,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 MRI Hall Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 MRI Hall, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
8, !- Number of Vertices
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.9144,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.9144,0.9144,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
3.6576,0.9144,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
3.6576,-0.3048,0.0000, !- X,Y,Z ==> Vertex 6 {m}
|
|
5.4864,-0.3048,0.0000, !- X,Y,Z ==> Vertex 7 {m}
|
|
5.4864,-2.1336,0.0000; !- X,Y,Z ==> Vertex 8 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 MRI Room Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 MRI Room, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.1816,-6.7056,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.9144,-6.7056,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-0.9144,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.1816,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 MRI Toilet Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 MRI Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-2.7432,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,-2.7432,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Med Gas Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 1 Med Gas, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Med Gas Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Med Gas, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Nourishment Slab,!- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Nourishment, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,-7.9248,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-7.9248,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Nurse Hall Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Nurse Hall, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-16.1544,2.4384,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-16.1544,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Nurse Janitor Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Nurse Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,-1.8288,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Nurse Station Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Nurse Station, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.8392,-2.7432,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.8392,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.7432,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Nurse Storage Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Sterile Storage, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
10.0584,3.6576,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.0584,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Nurse Toilet Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Nurse Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.8288,-2.7432,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.7432,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Office Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Office, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
6.0960,7.9248,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.0960,0.9144,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-0.3048,0.9144,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-0.3048,7.9248,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Operating Room 1 Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Operating Room 1,!- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.7912,7.0104,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7912,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-0.3048,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-0.3048,7.0104,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Operating Room 2 Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Operating Room 2,!- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.3152,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,7.3152,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Operating Room 3 Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Operating Room 3,!- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
8.5344,5.1816,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
8.5344,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.1816,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 PACU Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 PACU, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,-2.7432,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.7432,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Pre-Op Hall Slab,!- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Pre-Op Hall, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-20.1168,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.4384,-20.1168,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Pre-Op Room 1 Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Pre-Op Room 1, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-5.4864,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.9144,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.9144,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Pre-Op Room 2 Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Pre-Op Room 2, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,7.9248,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.2192,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.2192,7.9248,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Pre-Op Toilet Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Pre-Op Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-1.8288,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Procedure Room Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Procedure Room, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-5.4864,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.3048,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.3048,-4.5720,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,-4.5720,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Reception Hall Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Reception Hall, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,2.4384,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.8768,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.8768,2.4384,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Reception Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Reception, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
2.1336,14.6304,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.5720,14.6304,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.5720,7.6200,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,7.6200,0.0000, !- X,Y,Z ==> Vertex 4 {m}
|
|
6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 5 {m}
|
|
2.1336,0.0000,0.0000; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Recovery Room Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Recovery Room, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
18.8976,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1816,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.1816,3.6576,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
18.8976,3.6576,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Scheduling Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Scheduling, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.1816,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,5.1816,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Scrub Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Scrub, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,-4.2672,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Soil Hold Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Soil Hold, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,2.4384,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,2.4384,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Soil Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Soil, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-4.2672,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Soil Work Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Soil Work, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,3.6576,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.5720,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.5720,3.6576,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Step Down Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Step Down, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,3.6576,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1816,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.1816,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Sterile Hall Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Sterile Hall, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,23.4696,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.4384,23.4696,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.4384,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Storage Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Storage, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-11.5824,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.6096,-7.0104,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-11.5824,-7.0104,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Storge Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 1 Storage, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.6096,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-11.5824,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-11.5824,-7.0104,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.6096,-7.0104,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Sub-Sterile Slab,!- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Sub-Sterile, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,4.2672,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Utility Hall Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 1 Utility Hall, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.4384,4.2672,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,-0.6096,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-0.6096,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.2672,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Utility Hall Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Utility Hall, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-5.4864,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,-5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,4.2672,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.2672,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Utility Janitor Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Utility Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,-2.1336,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Utility Room Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Utility Room, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-6.0960,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-6.0960,5.4864,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.4864,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 1 Vestibule Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
Floor 1 Vestibule, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-2.4384,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Dressing Room Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Dressing Room, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.1336,1.8288,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Elevator Hall Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Elevator Hall, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
-3.0480,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.0480,-3.9624,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,-3.9624,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,-10.0584,3.0480, !- X,Y,Z ==> Vertex 4 {m}
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 5 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Humid Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Humid, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.8288,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-5.4864,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.8288,-5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Janitor Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Janitor, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,-2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Locker Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Locker, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.0480,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,3.0480,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Lounge Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Lounge, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
7.0104,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
7.0104,-10.0584,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Lounge Toilet Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Lounge Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.6576,4.8768,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.8768,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Mechanical Hall Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Mechanical Hall, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,7.3152,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,22.5552,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.8288,22.5552,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.8288,7.3152,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Mechanical Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Mechanical, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,7.6200,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.2672,7.6200,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Office Hall Roof,!- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Office Hall, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
42.3672,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
42.3672,1.8288,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,1.8288,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Office Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Office, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-28.0416,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-28.0416,-10.0584,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-10.0584,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Office Toilet Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Office Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.7432,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,1.8288,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Phyical Therapy 1 Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Physical Therapy 1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-19.8120,6.0960,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-19.8120,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.0960,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Physical Therapy 2 Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Physical Therapy 2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-4.8768,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
11.2776,-4.8768,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.2776,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Physical Therapy Toilet Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Physical Therapy Toilet, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-2.1336,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,1.8288,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.4864,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,5.4864,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Storage 1 Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Storage 1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,1.8288,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,1.8288,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Storage 2 Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Storage 2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-3.6576,2.1336,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.1336,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Treatment Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Treatment, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,6.0960,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.2672,6.0960,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.2672,16.4592,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,16.4592,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Undeveloped 1 Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Undeveloped 1, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
12.8016,0.0000,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
12.8016,16.4592,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,16.4592,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Undeveloped 2 Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Undeveloped 2, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
6, !- Number of Vertices
|
|
0.0000,4.8768,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.6576,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.6576,-2.4384,3.0480, !- X,Y,Z ==> Vertex 4 {m}
|
|
15.8496,-2.4384,3.0480, !- X,Y,Z ==> Vertex 5 {m}
|
|
15.8496,4.8768,3.0480; !- X,Y,Z ==> Vertex 6 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Utility Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Utility, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
5.4864,-3.6576,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.4864,0.0000,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-3.6576,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
Floor 3 Work Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
Floor 3 Work, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-4.2672,-12.4968,3.0480, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-12.4968,3.0480, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,3.0480, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.2672,0.0000,3.0480; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NE Stair Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.1336,9.1440, !- X,Y,Z ==> Vertex 2 {m}
|
|
-7.3152,2.1336,9.1440, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.3152,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NE Stair Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
NE Stair, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,2.1336,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-7.3152,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.3152,2.1336,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NW Elevator Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
NW Elevator, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
0.0000,-6.0960,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.1336,-6.0960,9.1440, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,0.0000,9.1440, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NW Elevator Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
NW Elevator, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
2.1336,-6.0960,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-6.0960,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NW Stair Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
NW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-1.5240,2.4384,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.8392,2.4384,9.1440, !- X,Y,Z ==> Vertex 2 {m}
|
|
-8.8392,0.0000,9.1440, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.5240,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
NW Stair Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
NW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
-8.8392,2.4384,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.5240,2.4384,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.5240,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-8.8392,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
SW Stair Roof, !- Name
|
|
Roof, !- Surface Type
|
|
IEAD Non-res Roof, !- Construction Name
|
|
SW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Outdoors, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
SunExposed, !- Sun Exposure
|
|
WindExposed, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.2192,0.0000,9.1440, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.2192,-2.4384,9.1440, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.8768,-2.4384,9.1440, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.8768,0.0000,9.1440; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
BuildingSurface:Detailed,
|
|
SW Stair Slab, !- Name
|
|
Floor, !- Surface Type
|
|
ext-slab, !- Construction Name
|
|
SW Stair, !- Zone Name
|
|
, !- Space Name
|
|
Ground, !- Outside Boundary Condition
|
|
, !- Outside Boundary Condition Object
|
|
NoSun, !- Sun Exposure
|
|
NoWind, !- Wind Exposure
|
|
AutoCalculate, !- View Factor to Ground
|
|
4, !- Number of Vertices
|
|
1.2192,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.8768,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.8768,-2.4384,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.2192,-2.4384,0.0000; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
! ***WINDOWS & DOORS***
|
|
|
|
FenestrationSurface:Detailed,
|
|
137A56, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
A5A6A3, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
2.7432,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.7432,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.4864,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.4864,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
142781, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
88E360, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-1.8288,2.1336,5.4864, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,2.1336,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.4864,2.1336,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.4864,2.1336,5.4864; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
15B02B, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
9C3A6A, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-0.7620,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.7620,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.5908,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.5908,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
18748E, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
6D2616, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-3.0480,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.0480,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.8768,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.8768,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
1AD478, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
97F00A, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
1.2192,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.2192,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.2672,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.2672,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
1D94BE, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
6D2616, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-0.3048,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.3048,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
1DA13A, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
28B002, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
15.8496,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
15.8496,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
17.6784,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
17.6784,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
2111A1, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
DFC6F0, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,0.7620,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.7620,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,1.3716,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,1.3716,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
24167A, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
997723, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-1.5240,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.5240,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.3048,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.3048,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
27F0AC, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
A497E9, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
1.2192,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
1.2192,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
6.0960,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
6.0960,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
29FA28, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
5ADC59, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-7.4676,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-7.4676,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-9.2964,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-9.2964,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
2BE8DE, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
1775A6, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,2.7432,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.7432,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.9144,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.9144,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
2C0938, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
997723, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
2.4384,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.4384,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.2672,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.2672,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
2EF63B, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
9621FD, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-3.0480,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.0480,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-4.8768,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-4.8768,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
3833A2, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
C86329, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,-8.8392,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-8.8392,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-7.0104,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-7.0104,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
38B811, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
1D96D7, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,5.0292,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.0292,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.8580,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.8580,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
3AAD8B, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
F629C1, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-1.0668,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.0668,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.8956,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.8956,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
3DADE2, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
C1BC97, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-13.7160,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-13.7160,0.0000,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
-10.6680,0.0000,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
-10.6680,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
3DB407, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
C1BC97, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-18.2880,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-18.2880,0.0000,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
-15.2400,0.0000,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
-15.2400,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
44E54A, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
28B002, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
6.4008,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
6.4008,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.2296,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.2296,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
44F571, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
1DEE26, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
10.9728,-2.4384,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.9728,-2.4384,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
14.6304,-2.4384,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
14.6304,-2.4384,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
4A8120, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
84FB73, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-0.6096,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.6096,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.1336,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.1336,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
4C1F71, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
4B1439, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,3.6577,2.4231, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.6577,1.2039, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.4865,1.2039, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.4865,2.4231; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
5031C8, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
C1BC97, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-4.5720,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.5720,0.0000,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.5240,0.0000,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.5240,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
513E2A, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
1775A6, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,8.2296,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,8.2296,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.4008,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.4008,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
5635BC, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
B4E619, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,4.2672,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.2672,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.7056,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.7056,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
591336, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
1D96D7, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,0.4572,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.4572,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.2860,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.2860,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
5E66D1, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Non-res, !- Construction Name
|
|
529072, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,0.6096,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,0.6096,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,3.0480,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,3.0480,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
6B5226, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
BE5F2F, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,4.2672,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.2672,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.6096,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.6096,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
6BD844, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
C86329, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,-2.7432,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.7432,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-0.9144,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-0.9144,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
71E924, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Non-res, !- Construction Name
|
|
8E5BB9, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-11.582,-0.6096,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-11.582,-0.6096,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-11.582,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-11.582,-1.8288,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
724114, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
88A75F, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.1524,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.1524,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.9812,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.9812,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
7248C5, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
5ADC59, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-19.6596,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-19.6596,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-21.4884,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-21.4884,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
757D10, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
EA6DC8, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.7620,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.7620,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.3716,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.3716,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
78F987, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
481E71, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.4572,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.4572,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.2860,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.2860,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
79FCEE, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
CE618F, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,0.9144,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.9144,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.3528,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.3528,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
7D2D69, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
9621FD, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-0.6096,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.6096,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
80885D, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
AEF992, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-7.0104,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-7.0104,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
-1.5240,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
-1.5240,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
8128A9, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
F629C1, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-3.8100,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.8100,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.6388,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.6388,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
820282, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
9C3A6A, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-3.8100,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.8100,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.6388,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.6388,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
831C1D, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
9EC269, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-0.9144,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.9144,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.6576,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.6576,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
84A1D5, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Non-res, !- Construction Name
|
|
3330D8, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,-0.6096,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,-0.6096,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,-1.8288,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,-1.8288,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
8600DD, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
CEC7BD, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.3048,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.3048,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.1336,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.1336,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
86D536, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
C86329, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,-5.4864,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-5.4864,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-3.6576,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-3.6576,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
88E1FC, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
859BC1, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-8.0772,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.0772,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-9.9060,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-9.9060,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
8D508E, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
28B002, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
9.4488,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
9.4488,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.2776,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.2776,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
8F59F7, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
1DEE26, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
4.8768,-2.4384,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.8768,-2.4384,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.5344,-2.4384,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.5344,-2.4384,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
93BBC3, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
2E2D0C, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-3.3528,2.4384,8.5344, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.3528,2.4384,7.0104, !- X,Y,Z ==> Vertex 2 {m}
|
|
-7.0104,2.4384,7.0104, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.0104,2.4384,8.5344; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
93D018, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
5B04CF, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,-0.6096,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-0.6096,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-4.2672,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-4.2672,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
944FCE, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
5ADC59, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-16.6116,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-16.6116,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-18.4404,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-18.4404,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
95BA33, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
D22917, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,0.6096,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.6096,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.4384,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.4384,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
9B1541, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
879583, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.6096,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.6096,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.4384,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.4384,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
9BA05A, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
68A2D7, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
5.7912,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7912,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.9624,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.9624,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
9BB95F, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
B316F7, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-1.2192,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.2192,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.0480,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.0480,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
9BC521, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
88E360, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-1.8288,2.1336,8.5344, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.8288,2.1336,7.0104, !- X,Y,Z ==> Vertex 2 {m}
|
|
-5.5739,2.1336,7.0104, !- X,Y,Z ==> Vertex 3 {m}
|
|
-5.5739,2.1336,8.5344; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
9CB8E5, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Non-res, !- Construction Name
|
|
88E360, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-4.877,2.1336,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.877,2.1336,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.096,2.1336,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.096,2.1336,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
9DF7DE, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
38B339, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,5.4864,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.4864,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.6576,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
A1ED60, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
859BC1, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-1.0668,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.0668,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.8956,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.8956,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
A2790A, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
CE3FEF, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
3.2004,4.8768,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.2004,4.8768,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.4572,4.8768,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.4572,4.8768,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
A6BA23, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
E326E4, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
5.7912,0.9144,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7912,0.9144,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.7912,2.7432,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.7912,2.7432,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
AAE778, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
FE5A3C, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,-8.5344,2.4638, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-8.5344,0.0254, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-12.1920,0.0254, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-12.1920,2.4638; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
B0FB49, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
8DA7DB, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
5.1816,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.1816,0.0000,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
7.6200,0.0000,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
7.6200,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
B1F5EE, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
D95F04, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,0.7620,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.7620,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.5908,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.5908,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
B2D381, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
28B002, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
12.8016,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
12.8016,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
14.6304,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
14.6304,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
B4E4BE, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
4B1439, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,6.7056,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,6.7056,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,8.5344,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,8.5344,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
BA5CD9, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
1775A6, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,5.4864,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,5.4864,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.6576,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.6576,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
BAF71D, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
C86329, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,-11.5824,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-11.5824,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-9.7536,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-9.7536,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
C044D6, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
1D96D7, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,2.7432,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.7432,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,4.5720,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,4.5720,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
C0778D, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
B316F7, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-4.2672,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.2672,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.0960,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
C087D0, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
8DA7DB, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.9144,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.9144,0.0000,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.9624,0.0000,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.9624,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
C41399, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
5ADC59, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-1.3716,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-1.3716,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-3.2004,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-3.2004,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
C417C0, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
42CEE1, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-0.9144,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-0.9144,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.7432,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.7432,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
C61F0D, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
5ADC59, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-4.4196,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.4196,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.2484,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.2484,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
C635A6, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
850EA7, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
2.5908,-2.4384,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
2.5908,-2.4384,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
3.5052,-2.4384,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
3.5052,-2.4384,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
C639E8, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
68A2D7, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
3.0480,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.0480,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
1.2192,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
1.2192,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
CF850A, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
879583, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
3.0480,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
3.0480,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
4.8768,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
4.8768,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
D0BE44, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
38B339, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,8.2296,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,8.2296,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.4008,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.4008,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
D10D28, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
E326E4, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
5.7912,4.2672,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
5.7912,4.2672,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
5.7912,6.0960,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
5.7912,6.0960,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
D23C8B, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
4B1439, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,0.9144,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.9144,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.7432,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.7432,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
D2CA75, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
8DA7DB, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
8.8392,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
8.8392,0.0000,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
11.8872,0.0000,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
11.8872,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
D538C4, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
B4E619, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,0.9144,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.9144,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.3528,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.3528,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
D8037E, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
5F762C, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
7.0104,-10.0584,2.4638, !- X,Y,Z ==> Vertex 1 {m}
|
|
7.0104,-10.0584,0.0254, !- X,Y,Z ==> Vertex 2 {m}
|
|
10.6680,-10.0584,0.0254, !- X,Y,Z ==> Vertex 3 {m}
|
|
10.6680,-10.0584,2.4638; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
DD9F5D, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
4B55FA, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,-2.2860,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,-2.2860,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,-0.4572,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,-0.4572,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
DF3E2C, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
C1BC97, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-9.1440,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-9.1440,0.0000,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.0960,0.0000,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.0960,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
E14DAE, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Non-res, !- Construction Name
|
|
D95F04, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.000,3.6576,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.000,3.6576,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.000,4.8768,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.000,4.8768,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
E33BAE, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
B40F89, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-2.4384,2.7432,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-2.4384,2.7432,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
-2.4384,0.9144,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
-2.4384,0.9144,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
E55A57, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
4ABC66, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
10.3632,-7.3152,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
10.3632,-7.3152,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
13.1064,-7.3152,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
13.1064,-7.3152,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
E74902, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
2E2D0C, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-3.3528,2.4384,5.4864, !- X,Y,Z ==> Vertex 1 {m}
|
|
-3.3528,2.4384,3.9624, !- X,Y,Z ==> Vertex 2 {m}
|
|
-7.0104,2.4384,3.9624, !- X,Y,Z ==> Vertex 3 {m}
|
|
-7.0104,2.4384,5.4864; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
E8D997, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
859BC1, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-4.5720,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-4.5720,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-6.4008,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-6.4008,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
EB042B, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
4B1439, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,9.4488,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,9.4488,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,11.2776,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,11.2776,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
EDE617, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
CE618F, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,4.2672,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,4.2672,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,6.7056,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,6.7056,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
EDE769, !- Name
|
|
Door, !- Surface Type
|
|
Swinging Door Non-res, !- Construction Name
|
|
5507DC, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-8.839,1.8288,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-8.839,1.8288,0.0000, !- X,Y,Z ==> Vertex 2 {m}
|
|
-8.839,0.6096,0.0000, !- X,Y,Z ==> Vertex 3 {m}
|
|
-8.839,0.6096,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
EEC10E, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
5ADC59, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-13.5636,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-13.5636,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-15.3924,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-15.3924,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
EEF55D, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
4ABC66, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
4.8768,-7.3152,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
4.8768,-7.3152,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
8.5344,-7.3152,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
8.5344,-7.3152,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
F0B23F, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
5ADC59, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
-10.5156,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
-10.5156,0.0000,0.9144, !- X,Y,Z ==> Vertex 2 {m}
|
|
-12.3444,0.0000,0.9144, !- X,Y,Z ==> Vertex 3 {m}
|
|
-12.3444,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
F27282, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
D22917, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,3.6576,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,3.6576,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,5.4864,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,5.4864,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
F52F3D, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
208CCF, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,0.9144,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.9144,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,2.7432,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,2.7432,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
F83F33, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
61E610, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,0.9144,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,0.9144,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,3.3528,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,3.3528,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
FE9BC9, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
38B339, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.0000,2.7432,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.0000,2.7432,0.6096, !- X,Y,Z ==> Vertex 2 {m}
|
|
0.0000,0.9144,0.6096, !- X,Y,Z ==> Vertex 3 {m}
|
|
0.0000,0.9144,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
FenestrationSurface:Detailed,
|
|
FEEF06, !- Name
|
|
Window, !- Surface Type
|
|
Window Non-res Fixed, !- Construction Name
|
|
54D065, !- Building Surface Name
|
|
, !- Outside Boundary Condition Object
|
|
AutoCalculate, !- View Factor to Ground
|
|
, !- Frame and Divider Name
|
|
1.0000, !- Multiplier
|
|
4, !- Number of Vertices
|
|
0.9144,0.0000,2.4384, !- X,Y,Z ==> Vertex 1 {m}
|
|
0.9144,0.0000,1.2192, !- X,Y,Z ==> Vertex 2 {m}
|
|
2.7432,0.0000,1.2192, !- X,Y,Z ==> Vertex 3 {m}
|
|
2.7432,0.0000,2.4384; !- X,Y,Z ==> Vertex 4 {m}
|
|
|
|
! ***GEOMETRY RULES***
|
|
|
|
GlobalGeometryRules,
|
|
UpperLeftCorner, !- Starting Vertex Position
|
|
Counterclockwise, !- Vertex Entry Direction
|
|
Relative, !- Coordinate System
|
|
Relative; !- Daylighting Reference Point Coordinate System
|
|
|
|
! ***PEOPLE***
|
|
|
|
People,
|
|
Floor 1 Cafe People, !- Name
|
|
Floor 1 Cafe, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
1.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Clean People, !- Name
|
|
Floor 1 Clean, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Clean Work People, !- Name
|
|
Floor 1 Clean Work, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Dictation People,!- Name
|
|
Floor 1 Dictation, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Dressing Room People, !- Name
|
|
Floor 1 Dressing Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Humid People, !- Name
|
|
Floor 1 Humid, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 IT Room People, !- Name
|
|
Floor 1 IT Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Lobby People, !- Name
|
|
Floor 1 Lobby, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
3.33, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Locker Room People, !- Name
|
|
Floor 1 Locker Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
6.67, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Lounge People, !- Name
|
|
Floor 1 Lounge, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
6.67, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 MRI Control Room People, !- Name
|
|
Floor 1 MRI Control Room,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 MRI Room People, !- Name
|
|
Floor 1 MRI Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Nourishment People, !- Name
|
|
Floor 1 Nourishment, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Nurse Station People, !- Name
|
|
Floor 1 Nurse Station, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Office People, !- Name
|
|
Floor 1 Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Operating Room 1 People, !- Name
|
|
Floor 1 Operating Room 1,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Operating Room 2 People, !- Name
|
|
Floor 1 Operating Room 2,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Operating Room 3 People, !- Name
|
|
Floor 1 Operating Room 3,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 PACU People, !- Name
|
|
Floor 1 PACU, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Pre-Op Room 1 People, !- Name
|
|
Floor 1 Pre-Op Room 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
10.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Pre-Op Room 2 People, !- Name
|
|
Floor 1 Pre-Op Room 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
10.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Procedure Room People, !- Name
|
|
Floor 1 Procedure Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Reception People,!- Name
|
|
Floor 1 Reception, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
3.33, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Recovery Room People, !- Name
|
|
Floor 1 Recovery Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Scheduling People, !- Name
|
|
Floor 1 Scheduling, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Soil Hold People,!- Name
|
|
Floor 1 Soil Hold, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Soil People, !- Name
|
|
Floor 1 Soil, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Soil Work People,!- Name
|
|
Floor 1 Soil Work, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 1 Step Down People,!- Name
|
|
Floor 1 Step Down, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Conference People, !- Name
|
|
Floor 2 Conference, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
2.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Dictation People,!- Name
|
|
Floor 2 Dictation, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Exam 1 People, !- Name
|
|
Floor 2 Exam 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Exam 2 People, !- Name
|
|
Floor 2 Exam 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Exam 3 People, !- Name
|
|
Floor 2 Exam 3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Exam 4 People, !- Name
|
|
Floor 2 Exam 4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Exam 5 People, !- Name
|
|
Floor 2 Exam 5, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Exam 6 People, !- Name
|
|
Floor 2 Exam 6, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Exam 7 People, !- Name
|
|
Floor 2 Exam 7, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Exam 8 People, !- Name
|
|
Floor 2 Exam 8, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Exam 9 People, !- Name
|
|
Floor 2 Exam 9, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Lounge People, !- Name
|
|
Floor 2 Lounge, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
6.67, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Nurse Station 1 People, !- Name
|
|
Floor 2 Nurse Station 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Nurse Station 2 People, !- Name
|
|
Floor 2 Nurse Station 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Office People, !- Name
|
|
Floor 2 Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Reception People,!- Name
|
|
Floor 2 Reception, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
3.33, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Scheduling 1 People, !- Name
|
|
Floor 2 Scheduling 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Scheduling 2 People, !- Name
|
|
Floor 2 Scheduling 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 Work People, !- Name
|
|
Floor 2 Work, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 2 X-Ray People, !- Name
|
|
Floor 2 X-Ray, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 3 Dressing Room People, !- Name
|
|
Floor 3 Dressing Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 3 Humid People, !- Name
|
|
Floor 3 Humid, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 3 Locker People, !- Name
|
|
Floor 3 Locker, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
6.67, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 3 Lounge People, !- Name
|
|
Floor 3 Lounge, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
6.67, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 3 Office People, !- Name
|
|
Floor 3 Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 3 Physical Therapy 1 People, !- Name
|
|
Floor 3 Physical Therapy 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 3 Physical Therapy 2 People, !- Name
|
|
Floor 3 Physical Therapy 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 3 Treatment People,!- Name
|
|
Floor 3 Treatment, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
5.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
People,
|
|
Floor 3 Work People, !- Name
|
|
Floor 3 Work, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_OCC_SCH, !- Number of People Schedule Name
|
|
Area/person, !- Number of People Calculation Method
|
|
, !- Number of People
|
|
, !- People per Floor Area {person/m2}
|
|
20.0, !- Floor Area per Person {m2/person}
|
|
0.3000, !- Fraction Radiant
|
|
AUTOCALCULATE, !- Sensible Heat Fraction
|
|
ACTIVITY_SCH, !- Activity Level Schedule Name
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
No, !- Enable ASHRAE 55 Comfort Warnings
|
|
ZoneAveraged, !- Mean Radiant Temperature Calculation Type
|
|
, !- Surface Name/Angle Factor List Name
|
|
WORK_EFF_SCH, !- Work Efficiency Schedule Name
|
|
ClothingInsulationSchedule, !- Clothing Insulation Calculation Method
|
|
, !- Clothing Insulation Calculation Method Schedule Name
|
|
CLOTHING_SCH, !- Clothing Insulation Schedule Name
|
|
AIR_VELO_SCH, !- Air Velocity Schedule Name
|
|
FANGER; !- Thermal Comfort Model 1 Type
|
|
|
|
! ***LIGHTS***
|
|
|
|
Lights,
|
|
Floor 1 Anesthesia_Lights, !- Name
|
|
Floor 1 Anesthesia, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
32.29, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Bio Haz_Lights, !- Name
|
|
Floor 1 Bio Haz, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Cafe_Lights, !- Name
|
|
Floor 1 Cafe, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Clean Work_Lights, !- Name
|
|
Floor 1 Clean Work, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
12.92, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Clean_Lights, !- Name
|
|
Floor 1 Clean, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
12.92, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Dictation_Lights,!- Name
|
|
Floor 1 Dictation, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Dressing Room_Lights, !- Name
|
|
Floor 1 Dressing Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Electrical Room_Lights, !- Name
|
|
Floor 1 Electrical Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Elevator Pump Room_Lights, !- Name
|
|
Floor 1 Elevator Pump Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Humid_Lights, !- Name
|
|
Floor 1 Humid, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 IT Hall_Lights, !- Name
|
|
Floor 1 IT Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 IT Room_Lights, !- Name
|
|
Floor 1 IT Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Lobby Hall_Lights, !- Name
|
|
Floor 1 Lobby Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Lobby Toilet_Lights, !- Name
|
|
Floor 1 Lobby Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Lobby_Lights, !- Name
|
|
Floor 1 Lobby, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
13.99, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Locker Room Hall_Lights, !- Name
|
|
Floor 1 Locker Room Hall,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Locker Room_Lights, !- Name
|
|
Floor 1 Locker Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
8.61, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Lounge_Lights, !- Name
|
|
Floor 1 Lounge, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
8.61, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 MRI Control Room_Lights, !- Name
|
|
Floor 1 MRI Control Room,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 MRI Hall_Lights, !- Name
|
|
Floor 1 MRI Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 MRI Room_Lights, !- Name
|
|
Floor 1 MRI Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 MRI Toilet_Lights, !- Name
|
|
Floor 1 MRI Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Med Gas_Lights, !- Name
|
|
Floor 1 Med Gas, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Nourishment_Lights, !- Name
|
|
Floor 1 Nourishment, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Nurse Hall_Lights, !- Name
|
|
Floor 1 Nurse Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Nurse Janitor_Lights, !- Name
|
|
Floor 1 Nurse Janitor, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Nurse Station_Lights, !- Name
|
|
Floor 1 Nurse Station, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Nurse Toilet_Lights, !- Name
|
|
Floor 1 Nurse Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Office_Lights, !- Name
|
|
Floor 1 Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Operating Room 1_Lights, !- Name
|
|
Floor 1 Operating Room 1,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
23.68, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Operating Room 2_Lights, !- Name
|
|
Floor 1 Operating Room 2,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
23.68, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Operating Room 3_Lights, !- Name
|
|
Floor 1 Operating Room 3,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
23.68, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 PACU_Lights, !- Name
|
|
Floor 1 PACU, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
8.61, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Pre-Op Hall_Lights, !- Name
|
|
Floor 1 Pre-Op Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Pre-Op Room 1_Lights, !- Name
|
|
Floor 1 Pre-Op Room 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Pre-Op Room 2_Lights, !- Name
|
|
Floor 1 Pre-Op Room 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
7.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Pre-Op Toilet_Lights, !- Name
|
|
Floor 1 Pre-Op Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Procedure Room_Lights, !- Name
|
|
Floor 1 Procedure Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
23.68, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Reception Hall_Lights, !- Name
|
|
Floor 1 Reception Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Reception_Lights,!- Name
|
|
Floor 1 Reception, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
13.99, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Recovery Room_Lights, !- Name
|
|
Floor 1 Recovery Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
8.61, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Scheduling_Lights, !- Name
|
|
Floor 1 Scheduling, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Scrub_Lights, !- Name
|
|
Floor 1 Scrub, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Soil Hold_Lights,!- Name
|
|
Floor 1 Soil Hold, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
12.92, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Soil Work_Lights,!- Name
|
|
Floor 1 Soil Work, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
12.92, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Soil_Lights, !- Name
|
|
Floor 1 Soil, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
12.92, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Step Down_Lights,!- Name
|
|
Floor 1 Step Down, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
8.61, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Sterile Hall_Lights, !- Name
|
|
Floor 1 Sterile Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Sterile Storage_Lights, !- Name
|
|
Floor 1 Sterile Storage, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Storage_Lights, !- Name
|
|
Floor 1 Storage, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Sub-Sterile_Lights, !- Name
|
|
Floor 1 Sub-Sterile, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Utility Hall_Lights, !- Name
|
|
Floor 1 Utility Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Utility Janitor_Lights, !- Name
|
|
Floor 1 Utility Janitor, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Utility Room_Lights, !- Name
|
|
Floor 1 Utility Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 1 Vestibule_Lights,!- Name
|
|
Floor 1 Vestibule, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Conference Toilet_Lights, !- Name
|
|
Floor 2 Conference Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Conference_Lights, !- Name
|
|
Floor 2 Conference, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
13.99, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Dictation_Lights,!- Name
|
|
Floor 2 Dictation, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam 1_Lights, !- Name
|
|
Floor 2 Exam 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
16.15, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam 2_Lights, !- Name
|
|
Floor 2 Exam 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
16.15, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam 3_Lights, !- Name
|
|
Floor 2 Exam 3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
16.15, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam 4_Lights, !- Name
|
|
Floor 2 Exam 4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
16.15, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam 5_Lights, !- Name
|
|
Floor 2 Exam 5, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
16.15, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam 6_Lights, !- Name
|
|
Floor 2 Exam 6, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
16.15, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam 7_Lights, !- Name
|
|
Floor 2 Exam 7, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
16.15, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam 8_Lights, !- Name
|
|
Floor 2 Exam 8, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
16.15, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam 9_Lights, !- Name
|
|
Floor 2 Exam 9, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
16.15, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam Hall 1_Lights, !- Name
|
|
Floor 2 Exam Hall 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam Hall 2_Lights, !- Name
|
|
Floor 2 Exam Hall 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam Hall 3_Lights, !- Name
|
|
Floor 2 Exam Hall 3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam Hall 4_Lights, !- Name
|
|
Floor 2 Exam Hall 4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam Hall 5_Lights, !- Name
|
|
Floor 2 Exam Hall 5, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Exam Hall 6_Lights, !- Name
|
|
Floor 2 Exam Hall 6, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Janitor_Lights, !- Name
|
|
Floor 2 Janitor, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Lounge_Lights, !- Name
|
|
Floor 2 Lounge, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
8.61, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Nurse Station 1_Lights, !- Name
|
|
Floor 2 Nurse Station 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Nurse Station 2_Lights, !- Name
|
|
Floor 2 Nurse Station 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Office Hall_Lights, !- Name
|
|
Floor 2 Office Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Office_Lights, !- Name
|
|
Floor 2 Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Reception Hall_Lights, !- Name
|
|
Floor 2 Reception Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Reception Toilet_Lights, !- Name
|
|
Floor 2 Reception Toilet,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Reception_Lights,!- Name
|
|
Floor 2 Reception, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
13.99, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Scheduling 1_Lights, !- Name
|
|
Floor 2 Scheduling 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Scheduling 2_Lights, !- Name
|
|
Floor 2 Scheduling 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Storage 1_Lights,!- Name
|
|
Floor 2 Storage 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Storage 2_Lights,!- Name
|
|
Floor 2 Storage 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Storage 3_Lights,!- Name
|
|
Floor 2 Storage 3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Utility_Lights, !- Name
|
|
Floor 2 Utility, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Work Hall_Lights,!- Name
|
|
Floor 2 Work Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Work Toilet_Lights, !- Name
|
|
Floor 2 Work Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 Work_Lights, !- Name
|
|
Floor 2 Work, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 2 X-Ray_Lights, !- Name
|
|
Floor 2 X-Ray, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Dressing Room_Lights, !- Name
|
|
Floor 3 Dressing Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Elevator Hall_Lights, !- Name
|
|
Floor 3 Elevator Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Humid_Lights, !- Name
|
|
Floor 3 Humid, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Janitor_Lights, !- Name
|
|
Floor 3 Janitor, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Locker_Lights, !- Name
|
|
Floor 3 Locker, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
8.61, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Lounge Toilet_Lights, !- Name
|
|
Floor 3 Lounge Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Lounge_Lights, !- Name
|
|
Floor 3 Lounge, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
8.61, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Mechanical Hall_Lights, !- Name
|
|
Floor 3 Mechanical Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Mechanical_Lights, !- Name
|
|
Floor 3 Mechanical, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Office Hall_Lights, !- Name
|
|
Floor 3 Office Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Office Toilet_Lights, !- Name
|
|
Floor 3 Office Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Office_Lights, !- Name
|
|
Floor 3 Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Physical Therapy 1_Lights, !- Name
|
|
Floor 3 Physical Therapy 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Physical Therapy 2_Lights, !- Name
|
|
Floor 3 Physical Therapy 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Physical Therapy Toilet_Lights, !- Name
|
|
Floor 3 Physical Therapy Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Storage 1_Lights,!- Name
|
|
Floor 3 Storage 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Storage 2_Lights,!- Name
|
|
Floor 3 Storage 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Treatment_Lights,!- Name
|
|
Floor 3 Treatment, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
16.15, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Utility_Lights, !- Name
|
|
Floor 3 Utility, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
9.69, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
Floor 3 Work_Lights, !- Name
|
|
Floor 3 Work, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
NE Stair_Lights, !- Name
|
|
NE Stair, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
NW Elevator_Lights, !- Name
|
|
NW Elevator, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
NW Stair_Lights, !- Name
|
|
NW Stair, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
Lights,
|
|
SW Stair_Lights, !- Name
|
|
SW Stair, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_LIGHT_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Lighting Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Return Air Fraction
|
|
0.7000, !- Fraction Radiant
|
|
0.2000, !- Fraction Visible
|
|
1.0000, !- Fraction Replaceable
|
|
General, !- End-Use Subcategory
|
|
No; !- Return Air Fraction Calculated from Plenum Temperature
|
|
|
|
! ***EQUIPMENT GAINS***
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Anesthesia_PlugMisc_Equip, !- Name
|
|
Floor 1 Anesthesia, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Bio Haz_PlugMisc_Equip, !- Name
|
|
Floor 1 Bio Haz, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
1.08, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Cafe_PlugMisc_Equip, !- Name
|
|
Floor 1 Cafe, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Clean Work_PlugMisc_Equip, !- Name
|
|
Floor 1 Clean Work, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Clean_PlugMisc_Equip, !- Name
|
|
Floor 1 Clean, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Dictation_PlugMisc_Equip, !- Name
|
|
Floor 1 Dictation, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Dressing Room_PlugMisc_Equip, !- Name
|
|
Floor 1 Dressing Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Electrical Room_PlugMisc_Equip, !- Name
|
|
Floor 1 Electrical Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
53.82, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Elevator Pump Room_Elevators_Equip, !- Name
|
|
Floor 1 Elevator Pump Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_ELEVATORS, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
48164.8351648352, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.1000, !- Fraction Radiant
|
|
0.9000, !- Fraction Lost
|
|
Elevators; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Humid_PlugMisc_Equip, !- Name
|
|
Floor 1 Humid, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 IT Hall_PlugMisc_Equip, !- Name
|
|
Floor 1 IT Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 IT Room_PlugMisc_Equip, !- Name
|
|
Floor 1 IT Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Lobby Hall_PlugMisc_Equip, !- Name
|
|
Floor 1 Lobby Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Lobby Toilet_PlugMisc_Equip, !- Name
|
|
Floor 1 Lobby Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Lobby Toilet_ZoneExhaustFans, !- Name
|
|
Floor 1 Lobby Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
15.7100591715976, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
1.0000, !- Fraction Lost
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Lobby_PlugMisc_Equip, !- Name
|
|
Floor 1 Lobby, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Locker Room Hall_PlugMisc_Equip, !- Name
|
|
Floor 1 Locker Room Hall,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Locker Room_PlugMisc_Equip, !- Name
|
|
Floor 1 Locker Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.29, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Lounge_PlugMisc_Equip, !- Name
|
|
Floor 1 Lounge, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.29, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 MRI Control Room_PlugMisc_Equip, !- Name
|
|
Floor 1 MRI Control Room,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 MRI Hall_PlugMisc_Equip, !- Name
|
|
Floor 1 MRI Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 MRI Room_PlugMisc_Equip, !- Name
|
|
Floor 1 MRI Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
RADIOLOGY_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
23445.7, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 MRI Toilet_PlugMisc_Equip, !- Name
|
|
Floor 1 MRI Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 MRI Toilet_ZoneExhaustFans, !- Name
|
|
Floor 1 MRI Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
15.7100591715976, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
1.0000, !- Fraction Lost
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Med Gas_PlugMisc_Equip, !- Name
|
|
Floor 1 Med Gas, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
1.08, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Nourishment_PlugMisc_Equip, !- Name
|
|
Floor 1 Nourishment, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Nurse Hall_PlugMisc_Equip, !- Name
|
|
Floor 1 Nurse Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Nurse Station_PlugMisc_Equip, !- Name
|
|
Floor 1 Nurse Station, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Nurse Toilet_PlugMisc_Equip, !- Name
|
|
Floor 1 Nurse Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Nurse Toilet_ZoneExhaustFans, !- Name
|
|
Floor 1 Nurse Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
15.7100591715976, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
1.0000, !- Fraction Lost
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Office_PlugMisc_Equip, !- Name
|
|
Floor 1 Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Operating Room 1_PlugMisc_Equip, !- Name
|
|
Floor 1 Operating Room 1,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
43.06, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Operating Room 2_PlugMisc_Equip, !- Name
|
|
Floor 1 Operating Room 2,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
43.06, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Operating Room 3_PlugMisc_Equip, !- Name
|
|
Floor 1 Operating Room 3,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
43.06, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 PACU_PlugMisc_Equip, !- Name
|
|
Floor 1 PACU, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.29, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Pre-Op Hall_PlugMisc_Equip, !- Name
|
|
Floor 1 Pre-Op Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Pre-Op Room 1_PlugMisc_Equip, !- Name
|
|
Floor 1 Pre-Op Room 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Pre-Op Room 2_PlugMisc_Equip, !- Name
|
|
Floor 1 Pre-Op Room 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Pre-Op Toilet_PlugMisc_Equip, !- Name
|
|
Floor 1 Pre-Op Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Pre-Op Toilet_ZoneExhaustFans, !- Name
|
|
Floor 1 Pre-Op Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
15.7100591715976, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
1.0000, !- Fraction Lost
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Procedure Room_PlugMisc_Equip, !- Name
|
|
Floor 1 Procedure Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.29, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Reception Hall_PlugMisc_Equip, !- Name
|
|
Floor 1 Reception Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Reception_PlugMisc_Equip, !- Name
|
|
Floor 1 Reception, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Recovery Room_PlugMisc_Equip, !- Name
|
|
Floor 1 Recovery Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.29, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Scheduling_PlugMisc_Equip, !- Name
|
|
Floor 1 Scheduling, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Scrub_PlugMisc_Equip, !- Name
|
|
Floor 1 Scrub, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Soil Hold_PlugMisc_Equip, !- Name
|
|
Floor 1 Soil Hold, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Soil Work_PlugMisc_Equip, !- Name
|
|
Floor 1 Soil Work, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Soil_PlugMisc_Equip, !- Name
|
|
Floor 1 Soil, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Step Down_PlugMisc_Equip, !- Name
|
|
Floor 1 Step Down, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.29, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Sterile Hall_PlugMisc_Equip, !- Name
|
|
Floor 1 Sterile Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Sterile Storage_PlugMisc_Equip, !- Name
|
|
Floor 1 Sterile Storage, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
1.08, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Sub-Sterile_PlugMisc_Equip, !- Name
|
|
Floor 1 Sub-Sterile, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Utility Hall_PlugMisc_Equip, !- Name
|
|
Floor 1 Utility Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Utility Room_PlugMisc_Equip, !- Name
|
|
Floor 1 Utility Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
1.08, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 1 Vestibule_PlugMisc_Equip, !- Name
|
|
Floor 1 Vestibule, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Conference Toilet_PlugMisc_Equip, !- Name
|
|
Floor 2 Conference Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Conference Toilet_ZoneExhaustFans, !- Name
|
|
Floor 2 Conference Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
18.6168639053254, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
1.0000, !- Fraction Lost
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Conference_PlugMisc_Equip, !- Name
|
|
Floor 2 Conference, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
10.76, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Dictation_PlugMisc_Equip, !- Name
|
|
Floor 2 Dictation, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam 1_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam 2_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam 3_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam 3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam 4_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam 4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam 5_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam 5, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam 6_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam 6, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam 7_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam 7, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam 8_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam 8, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam 9_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam 9, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam Hall 1_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam Hall 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam Hall 2_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam Hall 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam Hall 3_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam Hall 3, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam Hall 4_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam Hall 4, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam Hall 5_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam Hall 5, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Exam Hall 6_PlugMisc_Equip, !- Name
|
|
Floor 2 Exam Hall 6, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Lounge_PlugMisc_Equip, !- Name
|
|
Floor 2 Lounge, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.29, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Nurse Station 1_PlugMisc_Equip, !- Name
|
|
Floor 2 Nurse Station 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Nurse Station 2_PlugMisc_Equip, !- Name
|
|
Floor 2 Nurse Station 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
21.53, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Office Hall_PlugMisc_Equip, !- Name
|
|
Floor 2 Office Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Office_PlugMisc_Equip, !- Name
|
|
Floor 2 Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Reception Hall_PlugMisc_Equip, !- Name
|
|
Floor 2 Reception Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Reception Toilet_PlugMisc_Equip, !- Name
|
|
Floor 2 Reception Toilet,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Reception Toilet_ZoneExhaustFans, !- Name
|
|
Floor 2 Reception Toilet,!- Zone or ZoneList or Space or SpaceList Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
36.6531065088757, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
1.0000, !- Fraction Lost
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Reception_PlugMisc_Equip, !- Name
|
|
Floor 2 Reception, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Scheduling 1_PlugMisc_Equip, !- Name
|
|
Floor 2 Scheduling 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Scheduling 2_PlugMisc_Equip, !- Name
|
|
Floor 2 Scheduling 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Utility_PlugMisc_Equip, !- Name
|
|
Floor 2 Utility, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
1.08, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Work Hall_PlugMisc_Equip, !- Name
|
|
Floor 2 Work Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Work Toilet_PlugMisc_Equip, !- Name
|
|
Floor 2 Work Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Work Toilet_ZoneExhaustFans, !- Name
|
|
Floor 2 Work Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
15.7100591715976, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
1.0000, !- Fraction Lost
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 Work_PlugMisc_Equip, !- Name
|
|
Floor 2 Work, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 2 X-Ray_PlugMisc_Equip, !- Name
|
|
Floor 2 X-Ray, !- Zone or ZoneList or Space or SpaceList Name
|
|
RADIOLOGY_EQUIP_SCH, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
1172.3, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Dressing Room_PlugMisc_Equip, !- Name
|
|
Floor 3 Dressing Room, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Elevator Hall_PlugMisc_Equip, !- Name
|
|
Floor 3 Elevator Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Humid_PlugMisc_Equip, !- Name
|
|
Floor 3 Humid, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Locker_PlugMisc_Equip, !- Name
|
|
Floor 3 Locker, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.29, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Lounge Toilet_PlugMisc_Equip, !- Name
|
|
Floor 3 Lounge Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Lounge Toilet_ZoneExhaustFans, !- Name
|
|
Floor 3 Lounge Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
55.8505917159763, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
1.0000, !- Fraction Lost
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Lounge_PlugMisc_Equip, !- Name
|
|
Floor 3 Lounge, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
32.29, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Mechanical Hall_PlugMisc_Equip, !- Name
|
|
Floor 3 Mechanical Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Mechanical_PlugMisc_Equip, !- Name
|
|
Floor 3 Mechanical, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
53.82, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Office Hall_PlugMisc_Equip, !- Name
|
|
Floor 3 Office Hall, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Office Toilet_PlugMisc_Equip, !- Name
|
|
Floor 3 Office Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Office Toilet_ZoneExhaustFans, !- Name
|
|
Floor 3 Office Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
15.7100591715976, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
1.0000, !- Fraction Lost
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Office_PlugMisc_Equip, !- Name
|
|
Floor 3 Office, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Physical Therapy 1_PlugMisc_Equip, !- Name
|
|
Floor 3 Physical Therapy 1, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
16.15, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Physical Therapy 2_PlugMisc_Equip, !- Name
|
|
Floor 3 Physical Therapy 2, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
16.15, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Physical Therapy Toilet_PlugMisc_Equip, !- Name
|
|
Floor 3 Physical Therapy Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
4.31, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Physical Therapy Toilet_ZoneExhaustFans, !- Name
|
|
Floor 3 Physical Therapy Toilet, !- Zone or ZoneList or Space or SpaceList Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
EquipmentLevel, !- Design Level Calculation Method
|
|
24.4341715976331, !- Design Level {W}
|
|
, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
1.0000, !- Fraction Lost
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Treatment_PlugMisc_Equip, !- Name
|
|
Floor 3 Treatment, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Utility_PlugMisc_Equip, !- Name
|
|
Floor 3 Utility, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
1.08, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.3000, !- Fraction Radiant
|
|
0.7000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
ElectricEquipment,
|
|
Floor 3 Work_PlugMisc_Equip, !- Name
|
|
Floor 3 Work, !- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
11.84, !- Watts per Zone Floor Area {W/m2}
|
|
, !- Watts per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.5000, !- Fraction Radiant
|
|
0.0000, !- Fraction Lost
|
|
General; !- End-Use Subcategory
|
|
|
|
GasEquipment,
|
|
Floor 1 Operating Room 1_GasMisc_Equip, !- Name
|
|
Floor 1 Operating Room 1,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
75.3, !- Power per Zone Floor Area {W/m2}
|
|
, !- Power per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
0.5000, !- Fraction Lost
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
General; !- End-Use Subcategory
|
|
|
|
GasEquipment,
|
|
Floor 1 Operating Room 2_GasMisc_Equip, !- Name
|
|
Floor 1 Operating Room 2,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
75.3, !- Power per Zone Floor Area {W/m2}
|
|
, !- Power per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
0.5000, !- Fraction Lost
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
General; !- End-Use Subcategory
|
|
|
|
GasEquipment,
|
|
Floor 1 Operating Room 3_GasMisc_Equip, !- Name
|
|
Floor 1 Operating Room 3,!- Zone or ZoneList or Space or SpaceList Name
|
|
BLDG_EQUIP_SCH, !- Schedule Name
|
|
Watts/Area, !- Design Level Calculation Method
|
|
, !- Design Level {W}
|
|
75.3, !- Power per Zone Floor Area {W/m2}
|
|
, !- Power per Person {W/person}
|
|
0.0000, !- Fraction Latent
|
|
0.0000, !- Fraction Radiant
|
|
0.5000, !- Fraction Lost
|
|
, !- Carbon Dioxide Generation Rate {m3/s-W}
|
|
General; !- End-Use Subcategory
|
|
|
|
! ***EXTERIOR LOADS***
|
|
|
|
Exterior:Lights,
|
|
Exterior Facade Lighting,!- Name
|
|
ALWAYS_ON, !- Schedule Name
|
|
14095, !- Design Level {W}
|
|
AstronomicalClock, !- Control Option
|
|
Exterior Facade Lighting;!- End-Use Subcategory
|
|
|
|
! ***INFILTRATION***
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Anesthesia_Infiltration, !- Name
|
|
Floor 1 Anesthesia, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Cafe_Infiltration, !- Name
|
|
Floor 1 Cafe, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Dressing Room_Infiltration, !- Name
|
|
Floor 1 Dressing Room, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Electrical Room_Infiltration, !- Name
|
|
Floor 1 Electrical Room, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Elevator Pump Room_Infiltration, !- Name
|
|
Floor 1 Elevator Pump Room, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Lobby Toilet_Infiltration, !- Name
|
|
Floor 1 Lobby Toilet, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Lobby_Infiltration, !- Name
|
|
Floor 1 Lobby, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Locker Room_Infiltration, !- Name
|
|
Floor 1 Locker Room, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 MRI Toilet_Infiltration, !- Name
|
|
Floor 1 MRI Toilet, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Med Gas_Infiltration, !- Name
|
|
Floor 1 Med Gas, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Operating Room 1_Infiltration, !- Name
|
|
Floor 1 Operating Room 1,!- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Operating Room 2_Infiltration, !- Name
|
|
Floor 1 Operating Room 2,!- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Pre-Op Room 1_Infiltration, !- Name
|
|
Floor 1 Pre-Op Room 1, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Pre-Op Toilet_Infiltration, !- Name
|
|
Floor 1 Pre-Op Toilet, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Procedure Room_Infiltration, !- Name
|
|
Floor 1 Procedure Room, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Reception_Infiltration, !- Name
|
|
Floor 1 Reception, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Recovery Room_Infiltration, !- Name
|
|
Floor 1 Recovery Room, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Scheduling_Infiltration, !- Name
|
|
Floor 1 Scheduling, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Step Down_Infiltration, !- Name
|
|
Floor 1 Step Down, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Storage_Infiltration, !- Name
|
|
Floor 1 Storage, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Sub-Sterile_Infiltration, !- Name
|
|
Floor 1 Sub-Sterile, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Utility Hall_Infiltration, !- Name
|
|
Floor 1 Utility Hall, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Utility Room_Infiltration, !- Name
|
|
Floor 1 Utility Room, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 1 Vestibule_Infiltration, !- Name
|
|
Floor 1 Vestibule, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Conference_Infiltration, !- Name
|
|
Floor 2 Conference, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Exam 1_Infiltration, !- Name
|
|
Floor 2 Exam 1, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Exam 2_Infiltration, !- Name
|
|
Floor 2 Exam 2, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Exam 3_Infiltration, !- Name
|
|
Floor 2 Exam 3, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Exam 4_Infiltration, !- Name
|
|
Floor 2 Exam 4, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Exam 5_Infiltration, !- Name
|
|
Floor 2 Exam 5, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Exam 6_Infiltration, !- Name
|
|
Floor 2 Exam 6, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Exam 7_Infiltration, !- Name
|
|
Floor 2 Exam 7, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Exam 8_Infiltration, !- Name
|
|
Floor 2 Exam 8, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Exam 9_Infiltration, !- Name
|
|
Floor 2 Exam 9, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Janitor_Infiltration, !- Name
|
|
Floor 2 Janitor, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Office_Infiltration, !- Name
|
|
Floor 2 Office, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Reception_Infiltration, !- Name
|
|
Floor 2 Reception, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Utility_Infiltration, !- Name
|
|
Floor 2 Utility, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Work Toilet_Infiltration, !- Name
|
|
Floor 2 Work Toilet, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 2 Work_Infiltration, !- Name
|
|
Floor 2 Work, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 3 Elevator Hall_Infiltration, !- Name
|
|
Floor 3 Elevator Hall, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 3 Janitor_Infiltration, !- Name
|
|
Floor 3 Janitor, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 3 Lounge Toilet_Infiltration, !- Name
|
|
Floor 3 Lounge Toilet, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 3 Lounge_Infiltration, !- Name
|
|
Floor 3 Lounge, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 3 Mechanical_Infiltration, !- Name
|
|
Floor 3 Mechanical, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 3 Office_Infiltration, !- Name
|
|
Floor 3 Office, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 3 Office Hall_Infiltration, !- Name
|
|
Floor 3 Office Hall, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 3 Office Toilet_Infiltration, !- Name
|
|
Floor 3 Office Toilet, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 3 Physical Therapy 1_Infiltration, !- Name
|
|
Floor 3 Physical Therapy 1, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 3 Undeveloped 1_Infiltration, !- Name
|
|
Floor 3 Undeveloped 1, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 3 Undeveloped 2_Infiltration, !- Name
|
|
Floor 3 Undeveloped 2, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
Floor 3 Work_Infiltration, !- Name
|
|
Floor 3 Work, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
Flow/ExteriorWallArea, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
0.000302, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
NE Stair_Infiltration, !- Name
|
|
NE Stair, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
AirChanges/Hour, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
1.0, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
NW Elevator_Infiltration,!- Name
|
|
NW Elevator, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
AirChanges/Hour, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
1.0, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
NW Stair_Infiltration, !- Name
|
|
NW Stair, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
AirChanges/Hour, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
1.0, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
ZoneInfiltration:DesignFlowRate,
|
|
SW Stair_Infiltration, !- Name
|
|
SW Stair, !- Zone or ZoneList Name
|
|
INFIL_SCH, !- Schedule Name
|
|
AirChanges/Hour, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
, !- Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Flow per Exterior Surface Area {m3/s-m2}
|
|
1.0, !- Air Changes per Hour {1/hr}
|
|
1.0000, !- Constant Term Coefficient
|
|
0.0000, !- Temperature Term Coefficient
|
|
0.0000, !- Velocity Term Coefficient
|
|
0.0000; !- Velocity Squared Term Coefficient
|
|
|
|
! ***INTERNAL MASS***
|
|
|
|
InternalMass,
|
|
Floor 1 Anesthesia Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Anesthesia, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
20.0671; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Bio Haz Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Bio Haz, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
10.4051; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Cafe Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Cafe, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
78.0386; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Clean Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Clean, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
23.4116; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Clean Work Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Clean Work, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
30.6580; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Dictation Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Dictation, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
23.4116; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Dressing Room Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Dressing Room, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
8.3613; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Electrical Room Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Electrical Room, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
18.2090; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Elevator Pump Room Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Elevator Pump Room, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
16.9084; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Humid Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Humid, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
10.0335; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 IT Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 IT Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
26.0129; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 IT Room Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 IT Room, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
20.8103; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Lobby Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Lobby Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
44.5935; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Lobby Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Lobby, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
115.5714; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Lobby Toilet Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Lobby Toilet, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
10.0335; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Locker Room Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Locker Room Hall,!- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
92.1598; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Locker Room Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Locker Room, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
122.6320; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Lounge Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Lounge, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
66.8902; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 MRI Control Room Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 MRI Control Room,!- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
31.2154; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 MRI Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 MRI Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
27.3135; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 MRI Room Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 MRI Room, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
81.7547; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 MRI Toilet Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 MRI Toilet, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
10.0335; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Med Gas Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Med Gas, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
10.4051; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Nourishment Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Nourishment, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
33.8167; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Nurse Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Nurse Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
92.1598; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Nurse Janitor Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Nurse Janitor, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
10.0335; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Nurse Station Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Nurse Station, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
48.4954; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Nurse Toilet Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Nurse Toilet, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
10.0335; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Office Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Office, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
89.7443; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Operating Room 1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Operating Room 1,!- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
85.4708; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Operating Room 2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Operating Room 2,!- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
89.1869; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Operating Room 3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Operating Room 3,!- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
88.4437; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 PACU Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 PACU, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
20.0671; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Pre-Op Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Pre-Op Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
98.1056; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Pre-Op Room 1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Pre-Op Room 1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
35.1173; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Pre-Op Room 2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Pre-Op Room 2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
62.8025; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Pre-Op Toilet Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Pre-Op Toilet, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
10.0335; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Procedure Room Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Procedure Room, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
52.9547; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Reception Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Reception Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
23.7832; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Reception Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Reception, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
94.5753; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Recovery Room Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Recovery Room, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
100.3353; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Scheduling Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Scheduling, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
22.1109; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Scrub Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Scrub, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
15.6077; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Soil Hold Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Soil Hold, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
10.4051; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Soil Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Soil, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
23.4116; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Soil Work Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Soil Work, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
33.4451; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Step Down Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Step Down, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
55.7418; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Sterile Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Sterile Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
114.4565; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Sterile Storage Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Sterile Storage, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
73.5792; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Storage Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Storage, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
170.9416; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Sub-Sterile Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Sub-Sterile, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
36.4180; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Utility Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Utility Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
47.5664; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Utility Janitor Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Utility Janitor, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
7.8039; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Utility Room Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Utility Room, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
66.8902; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 1 Vestibule Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 1 Vestibule, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
13.3780; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Conference Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Conference, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
62.4308; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Conference Toilet Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Conference Toilet, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
11.8916; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Dictation Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Dictation, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
13.0064; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam 1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam 1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
66.8902; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam 2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam 2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
100.3353; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam 3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam 3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
133.7804; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam 4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam 4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
15.6077; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam 5 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam 5, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
65.0321; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam 6 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam 6, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
41.8064; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam 7 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam 7, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
147.1584; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam 8 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam 8, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
50.1676; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam 9 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam 9, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
73.5792; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam Hall 1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam Hall 1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
33.4451; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam Hall 2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam Hall 2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
33.4451; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam Hall 3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam Hall 3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
33.4451; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam Hall 4 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam Hall 4, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
36.7896; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam Hall 5 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam Hall 5, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
36.7896; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Exam Hall 6 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Exam Hall 6, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
36.7896; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Janitor Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Janitor, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
11.7058; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Lounge Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Lounge, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
14.8645; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Nurse Station 1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Nurse Station 1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
27.8709; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Nurse Station 2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Nurse Station 2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
33.4451; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Office Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Office Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
82.4979; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Office Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Office, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
104.0514; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Reception Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Reception Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
104.7946; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Reception Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Reception, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
182.8332; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Reception Toilet Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Reception Toilet,!- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
23.4116; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Scheduling 1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Scheduling 1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
60.2012; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Scheduling 2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Scheduling 2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
63.5457; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Storage 1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Storage 1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
10.4051; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Storage 2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Storage 2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
22.2967; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Storage 3 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Storage 3, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
26.7561; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Utility Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Utility, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
23.4116; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Work Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Work Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
154.9623; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Work Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Work, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
314.0123; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 Work Toilet Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 Work Toilet, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
10.0335; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 2 X-Ray Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 2 X-Ray, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
167.2255; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Dressing Room Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Dressing Room, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
7.8039; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Elevator Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Elevator Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
68.7482; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Humid Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Humid, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
20.0671; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Janitor Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Janitor, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
11.7058; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Locker Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Locker, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
22.2967; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Lounge Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Lounge, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
141.0268; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Lounge Toilet Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Lounge Toilet, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
35.6748; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Mechanical Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Mechanical Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
55.7418; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Mechanical Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Mechanical, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
65.0321; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Office Hall Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Office Hall, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
154.9623; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Office Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Office, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
564.1073; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Office Toilet Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Office Toilet, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
10.0335; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Physical Therapy 1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Physical Therapy 1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
241.5479; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Physical Therapy 2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Physical Therapy 2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
109.9972; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Physical Therapy Toilet Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Physical Therapy Toilet, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
15.6077; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Storage 1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Storage 1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
20.0671; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Storage 2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Storage 2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
15.6077; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Treatment Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Treatment, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
88.4437; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Undeveloped 1 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Undeveloped 1, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
421.4082; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Undeveloped 2 Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Undeveloped 2, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
214.0486; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Utility Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Utility, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
40.1341; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
Floor 3 Work Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
Floor 3 Work, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
106.6527; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
NE Stair Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
NE Stair, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
31.2154; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
NW Elevator Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
NW Elevator, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
26.0129; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
NW Stair Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
NW Stair, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
35.6748; !- Surface Area {m2}
|
|
|
|
InternalMass,
|
|
SW Stair Internal Mass, !- Name
|
|
InteriorFurnishings, !- Construction Name
|
|
SW Stair, !- Zone or ZoneList Name
|
|
, !- Space or SpaceList Name
|
|
17.8374; !- Surface Area {m2}
|
|
|
|
! ***INTERNAL GAINS SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
BLDG_ELEVATORS, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 07:00,0.05, !- Field 3
|
|
Until: 08:00,0.5, !- Field 5
|
|
Until: 09:00,0.75, !- Field 7
|
|
Until: 10:00,1.00, !- Field 9
|
|
Until: 11:00,1.00, !- Field 11
|
|
Until: 12:00,1.00, !- Field 13
|
|
Until: 13:00,0.75, !- Field 15
|
|
Until: 14:00,1.00, !- Field 17
|
|
Until: 15:00,1.00, !- Field 19
|
|
Until: 16:00,1.00, !- Field 21
|
|
Until: 17:00,1.00, !- Field 23
|
|
Until: 18:00,1.00, !- Field 25
|
|
Until: 19:00,0.52, !- Field 27
|
|
Until: 20:00,0.52, !- Field 29
|
|
Until: 21:00,0.52, !- Field 31
|
|
Until: 22:00,0.28, !- Field 33
|
|
Until: 24:00,0.05, !- Field 35
|
|
For: Saturday, !- Field 37
|
|
Until: 07:00,0.05, !- Field 38
|
|
Until: 08:00,0.4, !- Field 40
|
|
Until: 09:00,0.46, !- Field 42
|
|
Until: 10:00,0.70, !- Field 44
|
|
Until: 11:00,0.70, !- Field 46
|
|
Until: 12:00,0.70, !- Field 48
|
|
Until: 13:00,0.51, !- Field 50
|
|
Until: 14:00,0.51, !- Field 52
|
|
Until: 15:00,0.51, !- Field 54
|
|
Until: 16:00,0.51, !- Field 56
|
|
Until: 17:00,0.51, !- Field 58
|
|
Until: 18:00,0.25, !- Field 60
|
|
Until: 24:00,0.05, !- Field 62
|
|
For: AllOtherDays, !- Field 64
|
|
Until: 08:00,0.05, !- Field 65
|
|
Until: 16:00,0.4, !- Field 67
|
|
Until: 24:00,0.05; !- Field 69
|
|
|
|
Schedule:Compact,
|
|
BLDG_EQUIP_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 04:00,0.30, !- Field 3
|
|
Until: 06:00,0.50, !- Field 5
|
|
Until: 18:00,1.00, !- Field 7
|
|
Until: 20:00,0.50, !- Field 9
|
|
Until: 24:00,0.30, !- Field 11
|
|
For: Saturday, !- Field 13
|
|
Until: 07:00,0.30, !- Field 14
|
|
Until: 09:00,0.50, !- Field 16
|
|
Until: 15:00,0.80, !- Field 18
|
|
Until: 20:00,0.50, !- Field 20
|
|
Until: 24:00,0.30, !- Field 22
|
|
For: AllOtherDays, !- Field 24
|
|
Until: 08:00,0.30, !- Field 25
|
|
Until: 17:00,0.50, !- Field 27
|
|
Until: 24:00,0.30; !- Field 29
|
|
|
|
Schedule:Compact,
|
|
RADIOLOGY_EQUIP_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays Saturday SummerDesignDay, !- Field 2
|
|
Until: 06:00,0.01, !- Field 3
|
|
Until: 18:00,0.96, !- Field 5
|
|
Until: 24:00,0.01, !- Field 7
|
|
For: AllOtherDays, !- Field 9
|
|
Until: 24:00,0.01; !- Field 10
|
|
|
|
Schedule:Compact,
|
|
BLDG_LIGHT_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 04:00,0.10, !- Field 3
|
|
Until: 06:00,0.30, !- Field 5
|
|
Until: 07:00,0.60, !- Field 7
|
|
Until: 18:00,0.90, !- Field 9
|
|
Until: 20:00,0.60, !- Field 11
|
|
Until: 22:00,0.30, !- Field 13
|
|
Until: 24:00,0.10, !- Field 15
|
|
For: Saturday, !- Field 17
|
|
Until: 07:00,0.10, !- Field 18
|
|
Until: 09:00,0.30, !- Field 20
|
|
Until: 15:00,0.40, !- Field 22
|
|
Until: 20:00,0.30, !- Field 24
|
|
Until: 24:00,0.10, !- Field 26
|
|
For: AllOtherDays, !- Field 28
|
|
Until: 08:00,0.05, !- Field 29
|
|
Until: 17:00,0.10, !- Field 31
|
|
Until: 24:00,0.05; !- Field 33
|
|
|
|
Schedule:Compact,
|
|
BLDG_OCC_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 04:00,0.05, !- Field 3
|
|
Until: 06:00,0.20, !- Field 5
|
|
Until: 07:00,0.50, !- Field 7
|
|
Until: 18:00,0.90, !- Field 9
|
|
Until: 20:00,0.50, !- Field 11
|
|
Until: 22:00,0.20, !- Field 13
|
|
Until: 24:00,0.05, !- Field 15
|
|
For: Saturday, !- Field 17
|
|
Until: 07:00,0.05, !- Field 18
|
|
Until: 09:00,0.20, !- Field 20
|
|
Until: 15:00,0.30, !- Field 22
|
|
Until: 20:00,0.20, !- Field 24
|
|
Until: 24:00,0.05, !- Field 26
|
|
For: AllOtherDays, !- Field 28
|
|
Until: 08:00,0.00, !- Field 29
|
|
Until: 17:00,0.05, !- Field 31
|
|
Until: 24:00,0.00; !- Field 33
|
|
|
|
Schedule:Compact,
|
|
CLOTHING_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 04/30, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0, !- Field 3
|
|
Through: 09/30, !- Field 5
|
|
For: AllDays, !- Field 6
|
|
Until: 24:00,0.5, !- Field 7
|
|
Through: 12/31, !- Field 9
|
|
For: AllDays, !- Field 10
|
|
Until: 24:00,1.0; !- Field 11
|
|
|
|
Schedule:Compact,
|
|
WORK_EFF_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
AIR_VELO_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
ACTIVITY_SCH, !- Name
|
|
Any Number, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,120.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
INFIL_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: SummerDesignDay WinterDesignDay, !- Field 2
|
|
Until: 24:00,1.0, !- Field 3
|
|
For: AllOtherDays, !- Field 5
|
|
Until: 24:00,0.5; !- Field 6
|
|
|
|
! ***TRANSFER AIR***
|
|
|
|
ZoneMixing,
|
|
Floor 1 Electrical Room Transfer Air, !- Name
|
|
Floor 1 Electrical Room, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00025, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 Lobby Hall, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 1 Elevator Pump Room Transfer Air, !- Name
|
|
Floor 1 Elevator Pump Room, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00025, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 IT Hall, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 1 Lobby Toilet Transfer Air, !- Name
|
|
Floor 1 Lobby Toilet, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.04248, !- Design Flow Rate {m3/s}
|
|
, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 Lobby, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 1 MRI Toilet Transfer Air, !- Name
|
|
Floor 1 MRI Toilet, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.04248, !- Design Flow Rate {m3/s}
|
|
, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 MRI Room, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 1 Nurse Janitor Transfer Air, !- Name
|
|
Floor 1 Nurse Janitor, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 Nurse Station, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 1 Nurse Toilet Transfer Air, !- Name
|
|
Floor 1 Nurse Toilet, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.04248, !- Design Flow Rate {m3/s}
|
|
, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 Nurse Hall, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 1 Pre-Op Toilet Transfer Air, !- Name
|
|
Floor 1 Pre-Op Toilet, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.04248, !- Design Flow Rate {m3/s}
|
|
, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 Pre-Op Hall, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 1 Storage Transfer Air, !- Name
|
|
Floor 1 Storage, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 Step Down, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 1 Utility Janitor Transfer Air, !- Name
|
|
Floor 1 Utility Janitor, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 Utility Hall, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 1 Utility Room Transfer Air, !- Name
|
|
Floor 1 Utility Room, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 Utility Hall, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 2 Conference Toilet Transfer Air, !- Name
|
|
Floor 2 Conference Toilet, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.05034, !- Design Flow Rate {m3/s}
|
|
, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 2 Conference, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 2 Janitor Transfer Air, !- Name
|
|
Floor 2 Janitor, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 2 Lounge, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 2 Reception Toilet Transfer Air, !- Name
|
|
Floor 2 Reception Toilet,!- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.09911, !- Design Flow Rate {m3/s}
|
|
, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 2 Reception, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 2 Storage 1 Transfer Air, !- Name
|
|
Floor 2 Storage 1, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 2 Office, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 2 Storage 2 Transfer Air, !- Name
|
|
Floor 2 Storage 2, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 2 Office, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 2 Storage 3 Transfer Air, !- Name
|
|
Floor 2 Storage 3, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 2 Office, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 2 Utility Transfer Air, !- Name
|
|
Floor 2 Utility, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 2 Work Hall, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 2 Work Toilet Transfer Air, !- Name
|
|
Floor 2 Work Toilet, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.04248, !- Design Flow Rate {m3/s}
|
|
, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 2 Work, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 3 Janitor Transfer Air, !- Name
|
|
Floor 3 Janitor, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 3 Office Hall, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 3 Lounge Toilet Transfer Air, !- Name
|
|
Floor 3 Lounge Toilet, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.15102, !- Design Flow Rate {m3/s}
|
|
, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 3 Lounge, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 3 Mechanical Transfer Air, !- Name
|
|
Floor 3 Mechanical, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00025, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 3 Mechanical Hall, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 3 Office Toilet Transfer Air, !- Name
|
|
Floor 3 Office Toilet, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.04248, !- Design Flow Rate {m3/s}
|
|
, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 3 Office, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 3 Physical Therapy Toilet Transfer Air, !- Name
|
|
Floor 3 Physical Therapy Toilet, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Zone, !- Design Flow Rate Calculation Method
|
|
0.06607, !- Design Flow Rate {m3/s}
|
|
, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 3 Physical Therapy 1, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 3 Storage 1 Transfer Air, !- Name
|
|
Floor 3 Storage 1, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 3 Work, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 3 Storage 2 Transfer Air, !- Name
|
|
Floor 3 Storage 2, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 3 Work, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
Floor 3 Utility Transfer Air, !- Name
|
|
Floor 3 Utility, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00075, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 3 Work, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
NE Stair Transfer Air, !- Name
|
|
NE Stair, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00025, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 Cafe, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
NW Elevator Transfer Air,!- Name
|
|
NW Elevator, !- Zone Name
|
|
AHU-2_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00025, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 3 Elevator Hall, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
NW Stair Transfer Air, !- Name
|
|
NW Stair, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00025, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 Lobby, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
ZoneMixing,
|
|
SW Stair Transfer Air, !- Name
|
|
SW Stair, !- Zone Name
|
|
AHU-1_Fan_Sch, !- Schedule Name
|
|
Flow/Area, !- Design Flow Rate Calculation Method
|
|
, !- Design Flow Rate {m3/s}
|
|
0.00025, !- Flow Rate per Zone Floor Area {m3/s-m2}
|
|
, !- Flow Rate per Person {m3/s-person}
|
|
, !- Air Changes per Hour {1/hr}
|
|
Floor 1 PACU, !- Source Zone Name
|
|
0.0; !- Delta Temperature {deltaC}
|
|
|
|
! ***HVAC EQUIPMENT***
|
|
|
|
Fan:VariableVolume,
|
|
AHU-1_Fan, !- Name
|
|
AHU-1_Fan_Sch, !- Availability Schedule Name
|
|
0.6045, !- Fan Total Efficiency
|
|
1515.192, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method
|
|
, !- Fan Power Minimum Flow Fraction
|
|
0.0000, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.93, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0407598940, !- Fan Power Coefficient 1
|
|
0.08804497, !- Fan Power Coefficient 2
|
|
-0.072926120, !- Fan Power Coefficient 3
|
|
0.9437398230, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
AHU-1_HeatC-AHU-1_FanNode, !- Air Inlet Node Name
|
|
AHU-1_Fan-AHU-1 HumidifierNode, !- Air Outlet Node Name
|
|
Fan Energy; !- End-Use Subcategory
|
|
|
|
Fan:VariableVolume,
|
|
AHU-2_Fan, !- Name
|
|
AHU-2_Fan_Sch, !- Availability Schedule Name
|
|
0.6045, !- Fan Total Efficiency
|
|
1515.192, !- Pressure Rise {Pa}
|
|
AUTOSIZE, !- Maximum Flow Rate {m3/s}
|
|
FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method
|
|
, !- Fan Power Minimum Flow Fraction
|
|
0.0000, !- Fan Power Minimum Air Flow Rate {m3/s}
|
|
0.93, !- Motor Efficiency
|
|
1.0, !- Motor In Airstream Fraction
|
|
0.0407598940, !- Fan Power Coefficient 1
|
|
0.08804497, !- Fan Power Coefficient 2
|
|
-0.072926120, !- Fan Power Coefficient 3
|
|
0.9437398230, !- Fan Power Coefficient 4
|
|
0, !- Fan Power Coefficient 5
|
|
AHU-2_HeatC-AHU-2_FanNode, !- Air Inlet Node Name
|
|
AHU-2 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
Fan Energy; !- End-Use Subcategory
|
|
|
|
Fan:ZoneExhaust,
|
|
Floor 1 Anesthesia Exhaust Fan, !- Name
|
|
AHU-1_Fan_Sch, !- Availability Schedule Name
|
|
0.338, !- Fan Total Efficiency
|
|
125, !- Pressure Rise {Pa}
|
|
0.0680, !- Maximum Flow Rate {m3/s}
|
|
Floor 1 Anesthesia Exhaust Fan Node, !- Air Inlet Node Name
|
|
Floor 1 Anesthesia Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
Fan:ZoneExhaust,
|
|
Floor 1 MRI Control Room Exhaust Fan, !- Name
|
|
AHU-1_Fan_Sch, !- Availability Schedule Name
|
|
0.338, !- Fan Total Efficiency
|
|
125, !- Pressure Rise {Pa}
|
|
0.0793, !- Maximum Flow Rate {m3/s}
|
|
Floor 1 MRI Control Room Exhaust Fan Node, !- Air Inlet Node Name
|
|
Floor 1 MRI Control Room Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
Fan:ZoneExhaust,
|
|
Floor 1 MRI Room Exhaust Fan, !- Name
|
|
AHU-1_Fan_Sch, !- Availability Schedule Name
|
|
0.338, !- Fan Total Efficiency
|
|
125, !- Pressure Rise {Pa}
|
|
0.2077, !- Maximum Flow Rate {m3/s}
|
|
Floor 1 MRI Room Exhaust Fan Node, !- Air Inlet Node Name
|
|
Floor 1 MRI Room Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
Fan:ZoneExhaust,
|
|
Floor 1 Soil Exhaust Fan,!- Name
|
|
AHU-1_Fan_Sch, !- Availability Schedule Name
|
|
0.338, !- Fan Total Efficiency
|
|
125, !- Pressure Rise {Pa}
|
|
0.0991, !- Maximum Flow Rate {m3/s}
|
|
Floor 1 Soil Exhaust Fan Node, !- Air Inlet Node Name
|
|
Floor 1 Soil Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
Fan:ZoneExhaust,
|
|
Floor 1 Soil Hold Exhaust Fan, !- Name
|
|
AHU-1_Fan_Sch, !- Availability Schedule Name
|
|
0.338, !- Fan Total Efficiency
|
|
125, !- Pressure Rise {Pa}
|
|
0.0440, !- Maximum Flow Rate {m3/s}
|
|
Floor 1 Soil Hold Exhaust Fan Node, !- Air Inlet Node Name
|
|
Floor 1 Soil Hold Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
Fan:ZoneExhaust,
|
|
Floor 1 Soil Work Exhaust Fan, !- Name
|
|
AHU-1_Fan_Sch, !- Availability Schedule Name
|
|
0.338, !- Fan Total Efficiency
|
|
125, !- Pressure Rise {Pa}
|
|
0.1416, !- Maximum Flow Rate {m3/s}
|
|
Floor 1 Soil Work Exhaust Fan Node, !- Air Inlet Node Name
|
|
Floor 1 Soil Work Exhaust Fan Outlet Node Name, !- Air Outlet Node Name
|
|
Zone Exhaust Fans; !- End-Use Subcategory
|
|
|
|
Coil:Cooling:DX:TwoSpeed,
|
|
AHU-1_CoolC DXCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- High Speed Gross Rated Total Cooling Capacity {W}
|
|
AUTOSIZE, !- High Speed Rated Sensible Heat Ratio
|
|
3.23372055845678, !- High Speed Gross Rated Cooling COP {W/W}
|
|
AUTOSIZE, !- High Speed Rated Air Flow Rate {m3/s}
|
|
, !- Unit Internal Static Air Pressure {Pa}
|
|
AHU-1_OA-AHU-1_CoolCNode,!- Air Inlet Node Name
|
|
AHU-1_CoolC-AHU-1_HeatCNode, !- Air Outlet Node Name
|
|
Measured_CoolCStandard10Ton_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
|
|
Measured_CoolCStandard10Ton_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
Measured_CoolCStandard10Ton_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
|
|
Measured_CoolCStandard10Ton_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
|
|
No_PLR_Degredation, !- Part Load Fraction Correlation Curve Name
|
|
AUTOSIZE, !- Low Speed Gross Rated Total Cooling Capacity {W}
|
|
AUTOSIZE, !- Low Speed Gross Rated Sensible Heat Ratio
|
|
3.28186528141147, !- Low Speed Gross Rated Cooling COP {W/W}
|
|
AUTOSIZE, !- Low Speed Rated Air Flow Rate {m3/s}
|
|
Measured_LowSpeedCoolCapLSFT, !- Low Speed Total Cooling Capacity Function of Temperature Curve Name
|
|
Measured_LowSpeedCoolEIRLSFT, !- Low Speed Energy Input Ratio Function of Temperature Curve Name
|
|
; !- Condenser Air Inlet Node Name
|
|
|
|
Coil:Cooling:DX:TwoSpeed,
|
|
AHU-2_CoolC DXCoil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- High Speed Gross Rated Total Cooling Capacity {W}
|
|
AUTOSIZE, !- High Speed Rated Sensible Heat Ratio
|
|
3.13380581903442, !- High Speed Gross Rated Cooling COP {W/W}
|
|
AUTOSIZE, !- High Speed Rated Air Flow Rate {m3/s}
|
|
, !- Unit Internal Static Air Pressure {Pa}
|
|
AHU-2_OA-AHU-2_CoolCNode,!- Air Inlet Node Name
|
|
AHU-2_CoolC-AHU-2_HeatCNode, !- Air Outlet Node Name
|
|
Measured_CoolCStandard10Ton_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
|
|
Measured_CoolCStandard10Ton_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
|
|
Measured_CoolCStandard10Ton_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
|
|
Measured_CoolCStandard10Ton_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
|
|
No_PLR_Degredation, !- Part Load Fraction Correlation Curve Name
|
|
AUTOSIZE, !- Low Speed Gross Rated Total Cooling Capacity {W}
|
|
AUTOSIZE, !- Low Speed Gross Rated Sensible Heat Ratio
|
|
3.18046297763047, !- Low Speed Gross Rated Cooling COP {W/W}
|
|
AUTOSIZE, !- Low Speed Rated Air Flow Rate {m3/s}
|
|
Measured_LowSpeedCoolCapLSFT, !- Low Speed Total Cooling Capacity Function of Temperature Curve Name
|
|
Measured_LowSpeedCoolEIRLSFT, !- Low Speed Energy Input Ratio Function of Temperature Curve Name
|
|
; !- Condenser Air Inlet Node Name
|
|
|
|
Coil:Heating:Water,
|
|
AHU-1_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
AHU-1_HeatCDemand Inlet Node, !- Water Inlet Node Name
|
|
AHU-1_HeatCDemand Outlet Node, !- Water Outlet Node Name
|
|
AHU-1_CoolC-AHU-1_HeatCNode, !- Air Inlet Node Name
|
|
AHU-1_HeatC-AHU-1_FanNode, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
AHU-2_HeatC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
AHU-2_HeatCDemand Inlet Node, !- Water Inlet Node Name
|
|
AHU-2_HeatCDemand Outlet Node, !- Water Outlet Node Name
|
|
AHU-2_CoolC-AHU-2_HeatCNode, !- Air Inlet Node Name
|
|
AHU-2_HeatC-AHU-2_FanNode, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Anesthesia VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Anesthesia VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Anesthesia VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Anesthesia VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Anesthesia VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Bio Haz VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Bio Haz VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Bio Haz VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Bio Haz VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Bio Haz VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Cafe VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Cafe VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Cafe VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Cafe VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Cafe VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Clean VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Clean VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Clean VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Clean VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Clean VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Clean Work VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Clean Work VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Clean Work VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Clean Work VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Clean Work VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Dictation VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Dictation VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Dictation VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Dictation VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Dictation VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Dressing Room VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Dressing Room VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Dressing Room VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Dressing Room VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Dressing Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Humid VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Humid VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Humid VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Humid VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Humid VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 IT Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 IT Hall VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 IT Hall VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 IT Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 IT Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 IT Room VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 IT Room VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 IT Room VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 IT Room VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 IT Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Lobby Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Lobby Hall VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Lobby Hall VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Lobby Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Lobby Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Lobby VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Lobby VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Lobby VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Lobby VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Lobby VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Locker Room Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Locker Room Hall VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Locker Room Hall VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Locker Room Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Locker Room Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Locker Room VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Locker Room VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Locker Room VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Locker Room VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Locker Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Lounge VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Lounge VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Lounge VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Lounge VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Lounge VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 MRI Control Room VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 MRI Control Room VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 MRI Control Room VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 MRI Control Room VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 MRI Control Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 MRI Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 MRI Hall VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 MRI Hall VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 MRI Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 MRI Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 MRI Room VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 MRI Room VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 MRI Room VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 MRI Room VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 MRI Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Med Gas VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Med Gas VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Med Gas VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Med Gas VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Med Gas VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Nourishment VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Nourishment VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Nourishment VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Nourishment VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Nourishment VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Nurse Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Nurse Hall VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Nurse Hall VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Nurse Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Nurse Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Nurse Station VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Nurse Station VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Nurse Station VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Nurse Station VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Nurse Station VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Office VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Office VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Office VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Office VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Office VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Operating Room 1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Operating Room 1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Operating Room 1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Operating Room 1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Operating Room 1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Operating Room 2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Operating Room 2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Operating Room 2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Operating Room 2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Operating Room 2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Operating Room 3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Operating Room 3 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Operating Room 3 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Operating Room 3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Operating Room 3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 PACU VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 PACU VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 PACU VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 PACU VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 PACU VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Pre-Op Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Pre-Op Hall VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Pre-Op Hall VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Pre-Op Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Pre-Op Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Pre-Op Room 1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Pre-Op Room 1 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Pre-Op Room 1 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Pre-Op Room 1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Pre-Op Room 1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Pre-Op Room 2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Pre-Op Room 2 VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Pre-Op Room 2 VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Pre-Op Room 2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Pre-Op Room 2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Procedure Room VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Procedure Room VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Procedure Room VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Procedure Room VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Procedure Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Reception Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Reception Hall VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Reception Hall VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Reception Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Reception Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Reception VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Reception VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Reception VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Reception VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Reception VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Recovery Room VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Recovery Room VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Recovery Room VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Recovery Room VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Recovery Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Scheduling VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Scheduling VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Scheduling VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Scheduling VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Scheduling VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Scrub VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Scrub VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Scrub VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Scrub VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Scrub VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Soil Hold VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Soil Hold VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Soil Hold VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Soil Hold VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Soil Hold VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Soil VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Soil VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Soil VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Soil VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Soil VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Soil Work VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Soil Work VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Soil Work VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Soil Work VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Soil Work VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Step Down VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Step Down VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Step Down VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Step Down VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Step Down VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Sterile Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Sterile Hall VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Sterile Hall VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Sterile Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Sterile Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Sterile Storage VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Sterile Storage VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Sterile Storage VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Sterile Storage VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Sterile Storage VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Sub-Sterile VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Sub-Sterile VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Sub-Sterile VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Sub-Sterile VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Sub-Sterile VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Utility Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Utility Hall VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Utility Hall VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Utility Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Utility Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Water,
|
|
Floor 1 Vestibule VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AUTOSIZE, !- U-Factor Times Area Value {W/K}
|
|
AUTOSIZE, !- Maximum Water Flow Rate {m3/s}
|
|
Floor 1 Vestibule VAV Box Reheat CoilDemand Inlet Node, !- Water Inlet Node Name
|
|
Floor 1 Vestibule VAV Box Reheat CoilDemand Outlet Node, !- Water Outlet Node Name
|
|
Floor 1 Vestibule VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 1 Vestibule VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
UFactorTimesAreaAndDesignWaterFlowRate, !- Performance Input Method
|
|
AUTOSIZE, !- Rated Capacity {W}
|
|
82.2, !- Rated Inlet Water Temperature {C}
|
|
16.6, !- Rated Inlet Air Temperature {C}
|
|
71.1, !- Rated Outlet Water Temperature {C}
|
|
32.2, !- Rated Outlet Air Temperature {C}
|
|
; !- Rated Ratio for Air and Water Convection
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Conference VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Conference VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Conference VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Dictation VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Dictation VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Dictation VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam 1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam 1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam 1 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam 2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam 2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam 2 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam 3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam 3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam 3 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam 4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam 4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam 4 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam 5 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam 5 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam 5 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam 6 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam 6 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam 6 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam 7 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam 7 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam 7 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam 8 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam 8 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam 8 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam 9 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam 9 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam 9 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam Hall 1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam Hall 1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam Hall 1 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam Hall 2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam Hall 2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam Hall 2 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam Hall 3 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam Hall 3 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam Hall 3 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam Hall 4 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam Hall 4 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam Hall 4 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam Hall 5 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam Hall 5 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam Hall 5 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Exam Hall 6 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Exam Hall 6 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Exam Hall 6 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Lounge VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Lounge VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Lounge VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Nurse Station 1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Nurse Station 1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Nurse Station 1 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Nurse Station 2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Nurse Station 2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Nurse Station 2 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Office Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Office Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Office Hall VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Office VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Office VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Office VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Reception Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Reception Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Reception Hall VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Reception VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Reception VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Reception VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Scheduling 1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Scheduling 1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Scheduling 1 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Scheduling 2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Scheduling 2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Scheduling 2 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Work Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Work Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Work Hall VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 Work VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 Work VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 Work VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 2 X-Ray VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 2 X-Ray VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 2 X-Ray VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 3 Dressing Room VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 3 Dressing Room VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 3 Dressing Room VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 3 Elevator Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 3 Elevator Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 3 Elevator Hall VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 3 Humid VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 3 Humid VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 3 Humid VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 3 Locker VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 3 Locker VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 3 Locker VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 3 Lounge VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 3 Lounge VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 3 Lounge VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 3 Mechanical Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 3 Mechanical Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 3 Mechanical Hall VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 3 Office Hall VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 3 Office Hall VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 3 Office Hall VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 3 Office VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 3 Office VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 3 Office VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 3 Physical Therapy 1 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 3 Physical Therapy 1 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 3 Physical Therapy 1 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 3 Physical Therapy 2 VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 3 Physical Therapy 2 VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 3 Physical Therapy 2 VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 3 Treatment VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 3 Treatment VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 3 Treatment VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Coil:Heating:Electric,
|
|
Floor 3 Work VAV Box Reheat Coil, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
1.0000, !- Efficiency
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
Floor 3 Work VAV Box Damper Node, !- Air Inlet Node Name
|
|
Floor 3 Work VAV Box Outlet Node Name; !- Air Outlet Node Name
|
|
|
|
Humidifier:Steam:Electric,
|
|
AHU-1 Humidifier, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
3.72E-5, !- Rated Capacity {m3/s}
|
|
100000, !- Rated Power {W}
|
|
0, !- Rated Fan Power {W}
|
|
0, !- Standby Power {W}
|
|
AHU-1_Fan-AHU-1 HumidifierNode, !- Air Inlet Node Name
|
|
AHU-1 Supply Equipment Outlet Node, !- Air Outlet Node Name
|
|
; !- Water Storage Tank Name
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Anesthesia VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Anesthesia VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Anesthesia VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Anesthesia VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Anesthesia VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Bio Haz VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Bio Haz VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Bio Haz VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Bio Haz VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Bio Haz VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Cafe VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Cafe VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Cafe VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Cafe VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Cafe VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Clean VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Clean VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Clean VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Clean VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Clean VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Clean Work VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Clean Work VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Clean Work VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Clean Work VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Clean Work VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Dictation VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Dictation VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Dictation VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Dictation VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Dictation VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Dressing Room VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Dressing Room VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Dressing Room VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Dressing Room VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Dressing Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Humid VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Humid VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Humid VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Humid VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Humid VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 IT Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 IT Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 IT Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 IT Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 IT Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 IT Room VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 IT Room VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 IT Room VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 IT Room VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 IT Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Lobby Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Lobby Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Lobby Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Lobby Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Lobby Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Lobby VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Lobby VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Lobby VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Lobby VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Lobby VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Locker Room Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Locker Room Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Locker Room Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Locker Room Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Locker Room Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Locker Room VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Locker Room VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Locker Room VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Locker Room VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Locker Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Lounge VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Lounge VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Lounge VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Lounge VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Lounge VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 MRI Control Room VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 MRI Control Room VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 MRI Control Room VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 MRI Control Room VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 MRI Control Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 MRI Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 MRI Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 MRI Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 MRI Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 MRI Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 MRI Room VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 MRI Room VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 MRI Room VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 MRI Room VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 MRI Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Med Gas VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Med Gas VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Med Gas VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Med Gas VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Med Gas VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Nourishment VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Nourishment VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Nourishment VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Nourishment VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Nourishment VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Nurse Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Nurse Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Nurse Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Nurse Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Nurse Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Nurse Station VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Nurse Station VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Nurse Station VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Nurse Station VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Nurse Station VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Office VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Office VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Office VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Office VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Office VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Operating Room 1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Operating Room 1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Operating Room 1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Operating Room 1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Operating Room 1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Operating Room 2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Operating Room 2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Operating Room 2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Operating Room 2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Operating Room 2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Operating Room 3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Operating Room 3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Operating Room 3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Operating Room 3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Operating Room 3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 PACU VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 PACU VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 PACU VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 PACU VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 PACU VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Pre-Op Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Pre-Op Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Pre-Op Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Pre-Op Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Pre-Op Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Pre-Op Room 1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Pre-Op Room 1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Pre-Op Room 1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Pre-Op Room 1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Pre-Op Room 1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Pre-Op Room 2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Pre-Op Room 2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Pre-Op Room 2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Pre-Op Room 2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Pre-Op Room 2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Procedure Room VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Procedure Room VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Procedure Room VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Procedure Room VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Procedure Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Reception Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Reception Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Reception Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Reception Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Reception Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Reception VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Reception VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Reception VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Reception VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Reception VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Recovery Room VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Recovery Room VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Recovery Room VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Recovery Room VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Recovery Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Scheduling VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Scheduling VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Scheduling VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Scheduling VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Scheduling VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Scrub VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Scrub VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Scrub VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Scrub VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Scrub VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Soil Hold VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Soil Hold VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Soil Hold VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Soil Hold VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Soil Hold VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Soil VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Soil VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Soil VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Soil VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Soil VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Soil Work VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Soil Work VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Soil Work VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Soil Work VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Soil Work VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Step Down VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Step Down VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Step Down VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Step Down VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Step Down VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Sterile Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Sterile Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Sterile Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Sterile Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Sterile Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Sterile Storage VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Sterile Storage VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Sterile Storage VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Sterile Storage VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Sterile Storage VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Sub-Sterile VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Sub-Sterile VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Sub-Sterile VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Sub-Sterile VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Sub-Sterile VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Utility Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Utility Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Utility Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Utility Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Utility Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 1 Vestibule VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 1 Vestibule VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 1 Vestibule VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
1.0, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Water, !- Reheat Coil Object Type
|
|
Floor 1 Vestibule VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 1 Vestibule VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Conference VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Conference VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Conference VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Conference VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Conference VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Dictation VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Dictation VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Dictation VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Dictation VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Dictation VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam 1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam 1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam 1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam 1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam 1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam 2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam 2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam 2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam 2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam 2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam 3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam 3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam 3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam 3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam 3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam 4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam 4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam 4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam 4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam 4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam 5 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam 5 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam 5 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam 5 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam 5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam 6 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam 6 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam 6 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam 6 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam 6 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam 7 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam 7 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam 7 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam 7 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam 7 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam 8 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam 8 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam 8 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam 8 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam 8 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam 9 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam 9 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam 9 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam 9 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam 9 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam Hall 1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam Hall 1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam Hall 1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam Hall 1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam Hall 1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam Hall 2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam Hall 2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam Hall 2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam Hall 2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam Hall 2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam Hall 3 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam Hall 3 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam Hall 3 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam Hall 3 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam Hall 3 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam Hall 4 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam Hall 4 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam Hall 4 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam Hall 4 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam Hall 4 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam Hall 5 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam Hall 5 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam Hall 5 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam Hall 5 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam Hall 5 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Exam Hall 6 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Exam Hall 6 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Exam Hall 6 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Exam Hall 6 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Exam Hall 6 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Lounge VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Lounge VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Lounge VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Lounge VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Lounge VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Nurse Station 1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Nurse Station 1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Nurse Station 1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Nurse Station 1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Nurse Station 1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Nurse Station 2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Nurse Station 2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Nurse Station 2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Nurse Station 2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Nurse Station 2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Office Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Office Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Office Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Office Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Office Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Office VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Office VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Office VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Office VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Office VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Reception Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Reception Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Reception Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Reception Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Reception Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Reception VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Reception VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Reception VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Reception VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Reception VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Scheduling 1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Scheduling 1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Scheduling 1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Scheduling 1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Scheduling 1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Scheduling 2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Scheduling 2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Scheduling 2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Scheduling 2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Scheduling 2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Work Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Work Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Work Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Work Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Work Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 Work VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 Work VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 Work VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 Work VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 Work VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 2 X-Ray VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 2 X-Ray VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 2 X-Ray VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 2 X-Ray VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 2 X-Ray VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 3 Dressing Room VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 3 Dressing Room VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 3 Dressing Room VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 3 Dressing Room VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 3 Dressing Room VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 3 Elevator Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 3 Elevator Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 3 Elevator Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 3 Elevator Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 3 Elevator Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 3 Humid VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 3 Humid VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 3 Humid VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 3 Humid VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 3 Humid VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 3 Locker VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 3 Locker VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 3 Locker VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 3 Locker VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 3 Locker VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 3 Lounge VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 3 Lounge VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 3 Lounge VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 3 Lounge VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 3 Lounge VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 3 Mechanical Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 3 Mechanical Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 3 Mechanical Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 3 Mechanical Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 3 Mechanical Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 3 Office Hall VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 3 Office Hall VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 3 Office Hall VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 3 Office Hall VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 3 Office Hall VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 3 Office VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 3 Office VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 3 Office VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 3 Office VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 3 Office VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 3 Physical Therapy 1 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 3 Physical Therapy 1 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 3 Physical Therapy 1 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 3 Physical Therapy 1 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 3 Physical Therapy 1 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 3 Physical Therapy 2 VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 3 Physical Therapy 2 VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 3 Physical Therapy 2 VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 3 Physical Therapy 2 VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 3 Physical Therapy 2 VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 3 Treatment VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 3 Treatment VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 3 Treatment VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 3 Treatment VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 3 Treatment VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
AirTerminal:SingleDuct:VAV:Reheat,
|
|
Floor 3 Work VAV Box Component, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
Floor 3 Work VAV Box Damper Node, !- Damper Air Outlet Node Name
|
|
Floor 3 Work VAV Box Inlet Node Name, !- Air Inlet Node Name
|
|
AUTOSIZE, !- Maximum Air Flow Rate {m3/s}
|
|
Constant, !- Zone Minimum Air Flow Input Method
|
|
0.3, !- Constant Minimum Air Flow Fraction
|
|
, !- Fixed Minimum Air Flow Rate {m3/s}
|
|
, !- Minimum Air Flow Fraction Schedule Name
|
|
Coil:Heating:Electric, !- Reheat Coil Object Type
|
|
Floor 3 Work VAV Box Reheat Coil, !- Reheat Coil Name
|
|
AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s}
|
|
0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s}
|
|
Floor 3 Work VAV Box Outlet Node Name, !- Air Outlet Node Name
|
|
0.001, !- Convergence Tolerance
|
|
NORMAL, !- Damper Heating Action
|
|
, !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2}
|
|
; !- Maximum Flow Fraction During Reheat
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Anesthesia Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Anesthesia VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
, !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
Fan:ZoneExhaust, !- Zone Equipment 2 Object Type
|
|
Floor 1 Anesthesia Exhaust Fan, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2, !- Zone Equipment 2 Heating or No-Load Sequence
|
|
, !- Zone Equipment 2 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 2 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Bio Haz Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Bio Haz VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Cafe Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Cafe VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Clean Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Clean VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Clean Work Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Clean Work VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Dictation Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Dictation VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Dressing Room Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Dressing Room VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Humid Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Humid VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 IT Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 IT Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 IT Room Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 IT Room VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Lobby Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Lobby VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Lobby Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Lobby Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Locker Room Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Locker Room VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Locker Room Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Locker Room Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Lounge Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Lounge VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 MRI Control Room Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 MRI Control Room VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
, !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
Fan:ZoneExhaust, !- Zone Equipment 2 Object Type
|
|
Floor 1 MRI Control Room Exhaust Fan, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2, !- Zone Equipment 2 Heating or No-Load Sequence
|
|
, !- Zone Equipment 2 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 2 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 MRI Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 MRI Hall VAV Box,!- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 MRI Room Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 MRI Room VAV Box,!- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
, !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
Fan:ZoneExhaust, !- Zone Equipment 2 Object Type
|
|
Floor 1 MRI Room Exhaust Fan, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2, !- Zone Equipment 2 Heating or No-Load Sequence
|
|
, !- Zone Equipment 2 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 2 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Med Gas Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Med Gas VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Nourishment Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Nourishment VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Nurse Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Nurse Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Nurse Station Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Nurse Station VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Office Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Office VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Operating Room 1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Operating Room 1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Operating Room 2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Operating Room 2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Operating Room 3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Operating Room 3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 PACU Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 PACU VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Pre-Op Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Pre-Op Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Pre-Op Room 1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Pre-Op Room 1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Pre-Op Room 2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Pre-Op Room 2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Procedure Room Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Procedure Room VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Reception Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Reception VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Reception Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Reception Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Recovery Room Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Recovery Room VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Scheduling Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Scheduling VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Scrub Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Scrub VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Soil Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Soil VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
, !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
Fan:ZoneExhaust, !- Zone Equipment 2 Object Type
|
|
Floor 1 Soil Exhaust Fan,!- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2, !- Zone Equipment 2 Heating or No-Load Sequence
|
|
, !- Zone Equipment 2 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 2 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Soil Hold Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Soil Hold VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
, !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
Fan:ZoneExhaust, !- Zone Equipment 2 Object Type
|
|
Floor 1 Soil Hold Exhaust Fan, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2, !- Zone Equipment 2 Heating or No-Load Sequence
|
|
, !- Zone Equipment 2 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 2 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Soil Work Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Soil Work VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
, !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
Fan:ZoneExhaust, !- Zone Equipment 2 Object Type
|
|
Floor 1 Soil Work Exhaust Fan, !- Zone Equipment 2 Name
|
|
2, !- Zone Equipment 2 Cooling Sequence
|
|
2, !- Zone Equipment 2 Heating or No-Load Sequence
|
|
, !- Zone Equipment 2 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 2 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Step Down Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Step Down VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Sterile Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Sterile Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Sterile Storage Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Sterile Storage VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Sub-Sterile Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Sub-Sterile VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Utility Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Utility Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 1 Vestibule Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 1 Vestibule VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Conference Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Conference VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Dictation Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Dictation VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam 1 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam 1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam 2 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam 2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam 3 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam 3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam 4 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam 4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam 5 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam 5 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam 6 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam 6 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam 7 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam 7 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam 8 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam 8 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam 9 Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam 9 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam Hall 1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam Hall 1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam Hall 2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam Hall 2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam Hall 3 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam Hall 3 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam Hall 4 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam Hall 4 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam Hall 5 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam Hall 5 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Exam Hall 6 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Exam Hall 6 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Lounge Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Lounge VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Nurse Station 1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Nurse Station 1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Nurse Station 2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Nurse Station 2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Office Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Office VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Office Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Office Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Reception Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Reception VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Reception Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Reception Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Scheduling 1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Scheduling 1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Scheduling 2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Scheduling 2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Work Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Work VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 Work Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 Work Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 2 X-Ray Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 2 X-Ray VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 3 Dressing Room Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 3 Dressing Room VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 3 Elevator Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 3 Elevator Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 3 Humid Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 3 Humid VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 3 Locker Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 3 Locker VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 3 Lounge Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 3 Lounge VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 3 Mechanical Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 3 Mechanical Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 3 Office Equipment,!- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 3 Office VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 3 Office Hall Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 3 Office Hall VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 3 Physical Therapy 1 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 3 Physical Therapy 1 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 3 Physical Therapy 2 Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 3 Physical Therapy 2 VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 3 Treatment Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 3 Treatment VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
ZoneHVAC:EquipmentList,
|
|
Floor 3 Work Equipment, !- Name
|
|
SequentialLoad, !- Load Distribution Scheme
|
|
ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type
|
|
Floor 3 Work VAV Box, !- Zone Equipment 1 Name
|
|
1, !- Zone Equipment 1 Cooling Sequence
|
|
1, !- Zone Equipment 1 Heating or No-Load Sequence
|
|
, !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name
|
|
; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name
|
|
|
|
! ***SIZING & CONTROLS***
|
|
! Cooling min. flow = 8 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Anesthesia, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Anesthesia, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.06796, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Anesthesia, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.0022578, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Bio Haz, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Bio Haz, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Bio Haz, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000762, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Cafe, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Cafe, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Cafe, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 4 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Clean, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Clean, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.039644, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Clean, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.0011289, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 4 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Clean Work, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Clean Work, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.051914, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Clean Work, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.0011289, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Dictation, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Dictation, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Dictation, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Dressing Room, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Dressing Room, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Dressing Room, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Humid, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Humid, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Humid, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 IT Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 IT Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 IT Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 IT Room, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 IT Room, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 IT Room, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Lobby, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Lobby, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Lobby, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.007079, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Lobby Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Lobby Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Lobby Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Locker Room, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Locker Room, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Locker Room, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.007079, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Locker Room Hall,!- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Locker Room Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Locker Room Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Lounge, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Lounge, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Lounge, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.007079, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 MRI Control Room,!- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 MRI Control Room, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.079287, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 MRI Control Room, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 MRI Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 MRI Hall,!- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 MRI Hall,!- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 MRI Room, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 MRI Room,!- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.207657, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 MRI Room,!- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Med Gas, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Med Gas, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Med Gas, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000762, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Nourishment, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Nourishment, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Nourishment, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Nurse Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Nurse Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Nurse Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Nurse Station, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Nurse Station, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Nurse Station, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Office, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Office, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Office, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 3 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 15 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Operating Room 1,!- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Operating Room 1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.54274, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Operating Room 1, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.108548; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 3 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 15 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Operating Room 2,!- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Operating Room 2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.566337, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Operating Room 2, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.113267; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 3 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 15 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Operating Room 3,!- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Operating Room 3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.561617, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Operating Room 3, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.112323; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 PACU, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 PACU, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.05097, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 PACU, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.01699; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Pre-Op Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Pre-Op Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Pre-Op Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Pre-Op Room 1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Pre-Op Room 1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.089198, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Pre-Op Room 1, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.029733; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Pre-Op Room 2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Pre-Op Room 2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.159518, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Pre-Op Room 2, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.053173; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 3 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 15 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Procedure Room, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Procedure Room, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.336263, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Procedure Room, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.067253; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Reception, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Reception, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Reception, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.007079, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Reception Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Reception Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Reception Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Recovery Room, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Recovery Room, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.254852, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Recovery Room, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.084951; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Scheduling, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Scheduling, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Scheduling, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Scrub, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Scrub, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Scrub, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 10 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Soil, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Soil, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.099109, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Soil, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.0028222, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 10 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Soil Hold, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Soil Hold, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.044048, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Soil Hold, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.0028222, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 10 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Soil Work, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Soil Work, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.141584, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Soil Work, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.0028222, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Min. OA flow = 2 ACH, per AIA Healthcare Guide 2001
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Step Down, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Step Down, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.141584, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Step Down, !- Name
|
|
Flow/Zone, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.047195; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Sterile Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Sterile Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Sterile Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Sterile Storage, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Sterile Storage, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Sterile Storage, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000762, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Sub-Sterile, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Sub-Sterile, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Sub-Sterile, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Utility Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Utility Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Utility Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 1 Vestibule, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
11.1, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.007, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 1 Vestibule, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 1 Vestibule, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Conference, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Conference, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Conference, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Dictation, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Dictation, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Dictation, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam 1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam 1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.169901, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam 1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam 2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam 2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.254852, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam 2, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam 3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam 3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.339802, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam 3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam 4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam 4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.039644, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam 4, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam 5, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam 5, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.165182, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam 5, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam 6, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam 6, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.106188, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam 6, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam 7, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam 7, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.373782, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam 7, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam 8, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam 8, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.127426, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam 8, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam 9, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam 9, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.186891, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam 9, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam Hall 1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam Hall 1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam Hall 1, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam Hall 2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam Hall 2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam Hall 2, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam Hall 3, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam Hall 3, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam Hall 3, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam Hall 4, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam Hall 4, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam Hall 4, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam Hall 5, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam Hall 5, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam Hall 5, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Exam Hall 6, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Exam Hall 6, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Exam Hall 6, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Lounge, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Lounge, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Lounge, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.007079, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Nurse Station 1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Nurse Station 1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Nurse Station 1, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Nurse Station 2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Nurse Station 2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Nurse Station 2, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Office, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Office, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Office, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Office Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Office Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Office Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Reception, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Reception, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Reception, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.007079, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Reception Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Reception Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Reception Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Scheduling 1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Scheduling 1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Scheduling 1, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Scheduling 2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Scheduling 2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Scheduling 2, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Work, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Work, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Work, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 2 Work Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 Work Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 Work Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 2 X-Ray, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 2 X-Ray, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.424753, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 2 X-Ray, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 3 Dressing Room, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 3 Dressing Room, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 3 Dressing Room, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 3 Elevator Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 3 Elevator Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 3 Elevator Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 3 Humid, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 3 Humid, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 3 Humid, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 3 Locker, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 3 Locker, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 3 Locker, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.007079, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 3 Lounge, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 3 Lounge, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 3 Lounge, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.007079, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 3 Mechanical Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 3 Mechanical Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 3 Mechanical Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 3 Office, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 3 Office, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 3 Office, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 3 Office Hall, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 3 Office Hall, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 3 Office Hall, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.000254, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 3 Physical Therapy 1, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 3 Physical Therapy 1, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.613532, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 3 Physical Therapy 1, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.007079, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 3 Physical Therapy 2, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 3 Physical Therapy 2, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.279393, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 3 Physical Therapy 2, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.007079, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
! Cooling min. flow = 6 ACH, per AIA Healthcare Guide 2001
|
|
|
|
Sizing:Zone,
|
|
Floor 3 Treatment, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
40.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 3 Treatment, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
0.224647, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 3 Treatment, !- Name
|
|
Flow/Area, !- Outdoor Air Method
|
|
, !- Outdoor Air Flow per Person {m3/s-person}
|
|
0.001524, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
Sizing:Zone,
|
|
Floor 3 Work, !- Zone or ZoneList Name
|
|
SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method
|
|
12.8, !- Zone Cooling Design Supply Air Temperature {C}
|
|
, !- Zone Cooling Design Supply Air Temperature Difference {deltaC}
|
|
SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method
|
|
50.0, !- Zone Heating Design Supply Air Temperature {C}
|
|
, !- Zone Heating Design Supply Air Temperature Difference {deltaC}
|
|
0.0078, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.008, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
SZ DSOA Floor 3 Work, !- Design Specification Outdoor Air Object Name
|
|
, !- Zone Heating Sizing Factor
|
|
, !- Zone Cooling Sizing Factor
|
|
DesignDayWithLimit, !- Cooling Design Air Flow Method
|
|
, !- Cooling Design Air Flow Rate {m3/s}
|
|
, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Cooling Minimum Air Flow {m3/s}
|
|
, !- Cooling Minimum Air Flow Fraction
|
|
DesignDay, !- Heating Design Air Flow Method
|
|
, !- Heating Design Air Flow Rate {m3/s}
|
|
, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
|
|
, !- Heating Maximum Air Flow {m3/s}
|
|
, !- Heating Maximum Air Flow Fraction
|
|
, !- Design Specification Zone Air Distribution Object Name
|
|
No, !- Account for Dedicated Outdoor Air System
|
|
NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy
|
|
autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C}
|
|
autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C}
|
|
|
|
DesignSpecification:OutdoorAir,
|
|
SZ DSOA Floor 3 Work, !- Name
|
|
Flow/Person, !- Outdoor Air Method
|
|
0.01, !- Outdoor Air Flow per Person {m3/s-person}
|
|
, !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
|
|
; !- Outdoor Air Flow per Zone {m3/s}
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Anesthesia Thermostat, !- Name
|
|
Floor 1 Anesthesia, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Bio Haz Thermostat, !- Name
|
|
Floor 1 Bio Haz, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Cafe Thermostat, !- Name
|
|
Floor 1 Cafe, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Clean Thermostat,!- Name
|
|
Floor 1 Clean, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Clean Work Thermostat, !- Name
|
|
Floor 1 Clean Work, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Dictation Thermostat, !- Name
|
|
Floor 1 Dictation, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Dressing Room Thermostat, !- Name
|
|
Floor 1 Dressing Room, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Humid Thermostat,!- Name
|
|
Floor 1 Humid, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 IT Hall Thermostat, !- Name
|
|
Floor 1 IT Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 IT Room Thermostat, !- Name
|
|
Floor 1 IT Room, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Lobby Hall Thermostat, !- Name
|
|
Floor 1 Lobby Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Lobby Thermostat,!- Name
|
|
Floor 1 Lobby, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Locker Room Hall Thermostat, !- Name
|
|
Floor 1 Locker Room Hall,!- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Locker Room Thermostat, !- Name
|
|
Floor 1 Locker Room, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Lounge Thermostat, !- Name
|
|
Floor 1 Lounge, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 MRI Control Room Thermostat, !- Name
|
|
Floor 1 MRI Control Room,!- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 MRI Hall Thermostat, !- Name
|
|
Floor 1 MRI Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 MRI Room Thermostat, !- Name
|
|
Floor 1 MRI Room, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Med Gas Thermostat, !- Name
|
|
Floor 1 Med Gas, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Nourishment Thermostat, !- Name
|
|
Floor 1 Nourishment, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Nurse Hall Thermostat, !- Name
|
|
Floor 1 Nurse Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Nurse Station Thermostat, !- Name
|
|
Floor 1 Nurse Station, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Office Thermostat, !- Name
|
|
Floor 1 Office, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Operating Room 1 Thermostat, !- Name
|
|
Floor 1 Operating Room 1,!- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Operating Room DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Operating Room 2 Thermostat, !- Name
|
|
Floor 1 Operating Room 2,!- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Operating Room DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Operating Room 3 Thermostat, !- Name
|
|
Floor 1 Operating Room 3,!- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Operating Room DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 PACU Thermostat, !- Name
|
|
Floor 1 PACU, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Pre-Op Hall Thermostat, !- Name
|
|
Floor 1 Pre-Op Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Pre-Op Room 1 Thermostat, !- Name
|
|
Floor 1 Pre-Op Room 1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Pre-Op Room 2 Thermostat, !- Name
|
|
Floor 1 Pre-Op Room 2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Procedure Room Thermostat, !- Name
|
|
Floor 1 Procedure Room, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Reception Hall Thermostat, !- Name
|
|
Floor 1 Reception Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Reception Thermostat, !- Name
|
|
Floor 1 Reception, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Recovery Room Thermostat, !- Name
|
|
Floor 1 Recovery Room, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Scheduling Thermostat, !- Name
|
|
Floor 1 Scheduling, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Scrub Thermostat,!- Name
|
|
Floor 1 Scrub, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Soil Hold Thermostat, !- Name
|
|
Floor 1 Soil Hold, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Soil Thermostat, !- Name
|
|
Floor 1 Soil, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Soil Work Thermostat, !- Name
|
|
Floor 1 Soil Work, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Step Down Thermostat, !- Name
|
|
Floor 1 Step Down, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Sterile Hall Thermostat, !- Name
|
|
Floor 1 Sterile Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Sterile Storage Thermostat, !- Name
|
|
Floor 1 Sterile Storage, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Sub-Sterile Thermostat, !- Name
|
|
Floor 1 Sub-Sterile, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Utility Hall Thermostat, !- Name
|
|
Floor 1 Utility Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 1 Vestibule Thermostat, !- Name
|
|
Floor 1 Vestibule, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Conference Thermostat, !- Name
|
|
Floor 2 Conference, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Dictation Thermostat, !- Name
|
|
Floor 2 Dictation, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam 1 Thermostat, !- Name
|
|
Floor 2 Exam 1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam 2 Thermostat, !- Name
|
|
Floor 2 Exam 2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam 3 Thermostat, !- Name
|
|
Floor 2 Exam 3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam 4 Thermostat, !- Name
|
|
Floor 2 Exam 4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam 5 Thermostat, !- Name
|
|
Floor 2 Exam 5, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam 6 Thermostat, !- Name
|
|
Floor 2 Exam 6, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam 7 Thermostat, !- Name
|
|
Floor 2 Exam 7, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam 8 Thermostat, !- Name
|
|
Floor 2 Exam 8, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam 9 Thermostat, !- Name
|
|
Floor 2 Exam 9, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam Hall 1 Thermostat, !- Name
|
|
Floor 2 Exam Hall 1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam Hall 2 Thermostat, !- Name
|
|
Floor 2 Exam Hall 2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam Hall 3 Thermostat, !- Name
|
|
Floor 2 Exam Hall 3, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam Hall 4 Thermostat, !- Name
|
|
Floor 2 Exam Hall 4, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam Hall 5 Thermostat, !- Name
|
|
Floor 2 Exam Hall 5, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Exam Hall 6 Thermostat, !- Name
|
|
Floor 2 Exam Hall 6, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Lounge Thermostat, !- Name
|
|
Floor 2 Lounge, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Nurse Station 1 Thermostat, !- Name
|
|
Floor 2 Nurse Station 1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Nurse Station 2 Thermostat, !- Name
|
|
Floor 2 Nurse Station 2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Office Hall Thermostat, !- Name
|
|
Floor 2 Office Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Office Thermostat, !- Name
|
|
Floor 2 Office, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Reception Hall Thermostat, !- Name
|
|
Floor 2 Reception Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Reception Thermostat, !- Name
|
|
Floor 2 Reception, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Scheduling 1 Thermostat, !- Name
|
|
Floor 2 Scheduling 1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Scheduling 2 Thermostat, !- Name
|
|
Floor 2 Scheduling 2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Work Hall Thermostat, !- Name
|
|
Floor 2 Work Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 Work Thermostat, !- Name
|
|
Floor 2 Work, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 2 X-Ray Thermostat,!- Name
|
|
Floor 2 X-Ray, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 3 Dressing Room Thermostat, !- Name
|
|
Floor 3 Dressing Room, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 3 Elevator Hall Thermostat, !- Name
|
|
Floor 3 Elevator Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 3 Humid Thermostat,!- Name
|
|
Floor 3 Humid, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 3 Locker Thermostat, !- Name
|
|
Floor 3 Locker, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 3 Lounge Thermostat, !- Name
|
|
Floor 3 Lounge, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 3 Mechanical Hall Thermostat, !- Name
|
|
Floor 3 Mechanical Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 3 Office Hall Thermostat, !- Name
|
|
Floor 3 Office Hall, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 3 Office Thermostat, !- Name
|
|
Floor 3 Office, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 3 Physical Therapy 1 Thermostat, !- Name
|
|
Floor 3 Physical Therapy 1, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 3 Physical Therapy 2 Thermostat, !- Name
|
|
Floor 3 Physical Therapy 2, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 3 Treatment Thermostat, !- Name
|
|
Floor 3 Treatment, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Thermostat,
|
|
Floor 3 Work Thermostat, !- Name
|
|
Floor 3 Work, !- Zone or ZoneList Name
|
|
Dual Zone Control Type Sched, !- Control Type Schedule Name
|
|
ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type
|
|
Typical DualSPSched; !- Control 1 Name
|
|
|
|
ZoneControl:Humidistat,
|
|
Floor 1 Operating Room 1 Humidistat, !- Name
|
|
Floor 1 Operating Room 1,!- Zone Name
|
|
MinRelHumSetSch, !- Humidifying Relative Humidity Setpoint Schedule Name
|
|
MaxRelHumSetSch; !- Dehumidifying Relative Humidity Setpoint Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Typical DualSPSched, !- Name
|
|
HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
ThermostatSetpoint:DualSetpoint,
|
|
Operating Room DualSPSched, !- Name
|
|
OR_HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name
|
|
OR_CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name
|
|
|
|
Sizing:System,
|
|
AHU-1, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
1.0000, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
7.2000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
11.1, !- Central Cooling Design Supply Air Temperature {C}
|
|
16.0, !- Central Heating Design Supply Air Temperature {C}
|
|
NonCoincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.007, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.007, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
OnOff; !- Central Cooling Capacity Control Method
|
|
|
|
Sizing:System,
|
|
AHU-2, !- AirLoop Name
|
|
Sensible, !- Type of Load to Size On
|
|
AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s}
|
|
0.3000, !- Central Heating Maximum System Air Flow Ratio
|
|
7.0, !- Preheat Design Temperature {C}
|
|
0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir}
|
|
11.1000, !- Precool Design Temperature {C}
|
|
0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir}
|
|
11.1, !- Central Cooling Design Supply Air Temperature {C}
|
|
16.0, !- Central Heating Design Supply Air Temperature {C}
|
|
Coincident, !- Type of Zone Sum to Use
|
|
No, !- 100% Outdoor Air in Cooling
|
|
No, !- 100% Outdoor Air in Heating
|
|
0.0078, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
0.0078, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir}
|
|
DesignDay, !- Cooling Supply Air Flow Rate Method
|
|
, !- Cooling Supply Air Flow Rate {m3/s}
|
|
, !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W}
|
|
DesignDay, !- Heating Supply Air Flow Rate Method
|
|
, !- Heating Supply Air Flow Rate {m3/s}
|
|
, !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2}
|
|
, !- Heating Fraction of Autosized Heating Supply Air Flow Rate
|
|
, !- Heating Fraction of Autosized Cooling Supply Air Flow Rate
|
|
, !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W}
|
|
ZoneSum, !- System Outdoor Air Method
|
|
1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless}
|
|
CoolingDesignCapacity, !- Cooling Design Capacity Method
|
|
autosize, !- Cooling Design Capacity {W}
|
|
, !- Cooling Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Cooling Design Capacity
|
|
HeatingDesignCapacity, !- Heating Design Capacity Method
|
|
autosize, !- Heating Design Capacity {W}
|
|
, !- Heating Design Capacity Per Floor Area {W/m2}
|
|
, !- Fraction of Autosized Heating Design Capacity
|
|
OnOff; !- Central Cooling Capacity Control Method
|
|
|
|
Controller:OutdoorAir,
|
|
AHU-1_OA_Controller, !- Name
|
|
AHU-1_OARelief Node, !- Relief Air Outlet Node Name
|
|
AHU-1 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
AHU-1_OA-AHU-1_CoolCNode,!- Mixed Air Node Name
|
|
AHU-1_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
NoEconomizer, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
18.3000, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
-100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
NoLockout, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
AHU-1_Fan_Sch, !- Minimum Outdoor Air Schedule Name
|
|
AHU-1_MinOAFracSchedule, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
; !- Maximum Fraction of Outdoor Air Schedule Name
|
|
|
|
Controller:OutdoorAir,
|
|
AHU-2_OA_Controller, !- Name
|
|
AHU-2_OARelief Node, !- Relief Air Outlet Node Name
|
|
AHU-2 Supply Equipment Inlet Node, !- Return Air Node Name
|
|
AHU-2_OA-AHU-2_CoolCNode,!- Mixed Air Node Name
|
|
AHU-2_OAInlet Node, !- Actuator Node Name
|
|
AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s}
|
|
AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s}
|
|
DifferentialDryBulb, !- Economizer Control Type
|
|
ModulateFlow, !- Economizer Control Action Type
|
|
18.3000, !- Economizer Maximum Limit Dry-Bulb Temperature {C}
|
|
64000.0, !- Economizer Maximum Limit Enthalpy {J/kg}
|
|
, !- Economizer Maximum Limit Dewpoint Temperature {C}
|
|
, !- Electronic Enthalpy Limit Curve Name
|
|
-100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C}
|
|
NoLockout, !- Lockout Type
|
|
FixedMinimum, !- Minimum Limit Type
|
|
AHU-2_Fan_Sch, !- Minimum Outdoor Air Schedule Name
|
|
, !- Minimum Fraction of Outdoor Air Schedule Name
|
|
; !- Maximum Fraction of Outdoor Air Schedule Name
|
|
|
|
Controller:WaterCoil,
|
|
AHU-1_HeatC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Normal, !- Action
|
|
Flow, !- Actuator Variable
|
|
AHU-1_HeatC-AHU-1_FanNode, !- Sensor Node Name
|
|
AHU-1_HeatCDemand Inlet Node, !- Actuator Node Name
|
|
0.0001, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
Controller:WaterCoil,
|
|
AHU-2_HeatC_Controller, !- Name
|
|
Temperature, !- Control Variable
|
|
Normal, !- Action
|
|
Flow, !- Actuator Variable
|
|
AHU-2_HeatC-AHU-2_FanNode, !- Sensor Node Name
|
|
AHU-2_HeatCDemand Inlet Node, !- Actuator Node Name
|
|
0.0001, !- Controller Convergence Tolerance {deltaC}
|
|
AUTOSIZE, !- Maximum Actuated Flow {m3/s}
|
|
0.0; !- Minimum Actuated Flow {m3/s}
|
|
|
|
SetpointManager:Scheduled,
|
|
AHU-1 SAT setpoint, !- Name
|
|
Temperature, !- Control Variable
|
|
CAV_SAT_SCH, !- Schedule Name
|
|
AHU-1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:Scheduled,
|
|
AHU-2 SAT setpoint, !- Name
|
|
Temperature, !- Control Variable
|
|
VAV_SAT_SCH, !- Schedule Name
|
|
AHU-2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
!- Stage 1 : Lennox LGE Measured Total Cooling Capacity Function of Temperature Curve
|
|
!- bi-quadratic curve = a + b*wb + c*wb**2 + d*edb + e*edb**2 + f*wb*edb
|
|
!- wb = entering wet-bulb temperature (C)
|
|
!- edb = dry-bulb temperature seen by the condenser (C)
|
|
|
|
Curve:Biquadratic,
|
|
Measured_LowSpeedCoolCapLSFT, !- Name
|
|
0.4136, !- Coefficient1 Constant
|
|
0.03105, !- Coefficient2 x
|
|
0, !- Coefficient3 x**2
|
|
0.006952, !- Coefficient4 y
|
|
-0.00021280, !- Coefficient5 y**2
|
|
0, !- Coefficient6 x*y
|
|
11.1, !- Minimum Value of x
|
|
29.4, !- Maximum Value of x
|
|
10.0, !- Minimum Value of y
|
|
50.3; !- Maximum Value of y
|
|
|
|
!- Stage 2 : Lennox LGE Measured Total Cooling Capacity Function of Temperature Curve
|
|
!- bi-quadratic curve = a + b*wb + c*wb**2 + d*edb + e*edb**2 + f*wb*edb
|
|
!- wb = entering wet-bulb temperature (C)
|
|
!- edb = dry-bulb temperature seen by the condenser (C)
|
|
|
|
Curve:Biquadratic,
|
|
Measured_CoolCStandard10Ton_CapFT, !- Name
|
|
0.52357, !- Coefficient1 Constant
|
|
0.03478, !- Coefficient2 x
|
|
0, !- Coefficient3 x**2
|
|
-0.001915, !- Coefficient4 y
|
|
-0.00010838, !- Coefficient5 y**2
|
|
0, !- Coefficient6 x*y
|
|
11.1, !- Minimum Value of x
|
|
29.4, !- Maximum Value of x
|
|
10.0, !- Minimum Value of y
|
|
50.3; !- Maximum Value of y
|
|
|
|
!- Stage 2 : Lennox LGE Measured Total Cooling Capacity Function of Flow Fraction Curve
|
|
!- quadratic curve = a + b*ff + c*ff**2
|
|
!- ff = fraction of the full load flow
|
|
|
|
Curve:Quadratic,
|
|
Measured_CoolCStandard10Ton_CapFF, !- Name
|
|
0.7685, !- Coefficient1 Constant
|
|
0.2315, !- Coefficient2 x
|
|
0, !- Coefficient3 x**2
|
|
0.776, !- Minimum Value of x
|
|
1.197; !- Maximum Value of x
|
|
|
|
!- Stage 1 : Lennox LGE Measured Energy Input Ratio Function of Temperature Curve
|
|
!- bi-quadratic curve = a + b*wb + c*wb**2 + d*edb + e*edb**2 + f*wb*edb
|
|
!- wb = entering wet-bulb temperature (C)
|
|
!- edb = dry-bulb temperature seen by the condenser (C)
|
|
|
|
Curve:Biquadratic,
|
|
Measured_LowSpeedCoolEIRLSFT, !- Name
|
|
1.1389, !- Coefficient1 Constant
|
|
-0.04518, !- Coefficient2 x
|
|
0.0014298, !- Coefficient3 x**2
|
|
0.006044, !- Coefficient4 y
|
|
0.0006745, !- Coefficient5 y**2
|
|
-0.0012325, !- Coefficient6 x*y
|
|
11.1, !- Minimum Value of x
|
|
29.4, !- Maximum Value of x
|
|
10.0, !- Minimum Value of y
|
|
50.3; !- Maximum Value of y
|
|
|
|
!- Stage 2 : Lennox LGE Measured Energy Input Ratio Function of Temperature Curve
|
|
!- bi-quadratic curve = a + b*wb + c*wb**2 + d*edb + e*edb**2 + f*wb*edb
|
|
!- wb = entering wet-bulb temperature (C)
|
|
!- edb = dry-bulb temperature seen by the condenser (C)
|
|
|
|
Curve:Biquadratic,
|
|
Measured_CoolCStandard10Ton_EIRFT, !- Name
|
|
0.9847, !- Coefficient1 Constant
|
|
-0.04285, !- Coefficient2 x
|
|
0.0013562, !- Coefficient3 x**2
|
|
0.009934, !- Coefficient4 y
|
|
0.0006398, !- Coefficient5 y**2
|
|
-0.0011690, !- Coefficient6 x*y
|
|
11.1, !- Minimum Value of x
|
|
29.4, !- Maximum Value of x
|
|
10.0, !- Minimum Value of y
|
|
50.3; !- Maximum Value of y
|
|
|
|
!- Stage 2 : Lennox LGE Measured Energy Input Ratio Function of Flow Fraction Curve
|
|
!- quadratic curve = a + b*ff + c*ff**2
|
|
!- ff = fraction of the full load flow
|
|
|
|
Curve:Quadratic,
|
|
Measured_CoolCStandard10Ton_EIRFFF, !- Name
|
|
1.192, !- Coefficient1 Constant
|
|
-0.1917, !- Coefficient2 x
|
|
0, !- Coefficient3 x**2
|
|
0.776, !- Minimum Value of x
|
|
1.197; !- Maximum Value of x
|
|
|
|
!- Part Load Fraction Correlation Curve [Assuming no compressor cycling degredation at part loads]
|
|
!- quadratic curve = a + b*PLR + c*PLR**2
|
|
!- PLR = part load ratio (sensible cooling load/steady-state sensible cooling capacity)
|
|
|
|
Curve:Quadratic,
|
|
No_PLR_Degredation, !- Name
|
|
1.0, !- Coefficient1 Constant
|
|
0, !- Coefficient2 x
|
|
0, !- Coefficient3 x**2
|
|
0.0, !- Minimum Value of x
|
|
1.0; !- Maximum Value of x
|
|
|
|
! ***AIR LOOPS***
|
|
|
|
AirLoopHVAC,
|
|
AHU-1, !- Name
|
|
AHU-1_Controllers, !- Controller List Name
|
|
AHU-1 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
AHU-1 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
AHU-1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
AHU-1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
AHU-1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
AHU-1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
AirLoopHVAC,
|
|
AHU-2, !- Name
|
|
AHU-2_Controllers, !- Controller List Name
|
|
AHU-2 Availability Manager List, !- Availability Manager List Name
|
|
AUTOSIZE, !- Design Supply Air Flow Rate {m3/s}
|
|
AHU-2 Air Loop Branches, !- Branch List Name
|
|
, !- Connector List Name
|
|
AHU-2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name
|
|
AHU-2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name
|
|
AHU-2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names
|
|
AHU-2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names
|
|
|
|
CoilSystem:Cooling:DX,
|
|
AHU-1_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AHU-1_OA-AHU-1_CoolCNode,!- DX Cooling Coil System Inlet Node Name
|
|
AHU-1_CoolC-AHU-1_HeatCNode, !- DX Cooling Coil System Outlet Node Name
|
|
AHU-1_CoolC-AHU-1_HeatCNode, !- DX Cooling Coil System Sensor Node Name
|
|
Coil:Cooling:DX:TwoSpeed,!- Cooling Coil Object Type
|
|
AHU-1_CoolC DXCoil; !- Cooling Coil Name
|
|
|
|
CoilSystem:Cooling:DX,
|
|
AHU-2_CoolC, !- Name
|
|
ALWAYS_ON, !- Availability Schedule Name
|
|
AHU-2_OA-AHU-2_CoolCNode,!- DX Cooling Coil System Inlet Node Name
|
|
AHU-2_CoolC-AHU-2_HeatCNode, !- DX Cooling Coil System Outlet Node Name
|
|
AHU-2_CoolC-AHU-2_HeatCNode, !- DX Cooling Coil System Sensor Node Name
|
|
Coil:Cooling:DX:TwoSpeed,!- Cooling Coil Object Type
|
|
AHU-2_CoolC DXCoil; !- Cooling Coil Name
|
|
|
|
! ***CONNECTIONS***
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Anesthesia, !- Zone Name
|
|
Floor 1 Anesthesia Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Anesthesia Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Floor 1 Anesthesia Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Anesthesia Air Node, !- Zone Air Node Name
|
|
Floor 1 Anesthesia Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Bio Haz, !- Zone Name
|
|
Floor 1 Bio Haz Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Bio Haz Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Bio Haz Air Node,!- Zone Air Node Name
|
|
Floor 1 Bio Haz Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Cafe, !- Zone Name
|
|
Floor 1 Cafe Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Cafe Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Cafe Air Node, !- Zone Air Node Name
|
|
Floor 1 Cafe Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Clean, !- Zone Name
|
|
Floor 1 Clean Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Clean Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Clean Air Node, !- Zone Air Node Name
|
|
Floor 1 Clean Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Clean Work, !- Zone Name
|
|
Floor 1 Clean Work Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Clean Work Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Clean Work Air Node, !- Zone Air Node Name
|
|
Floor 1 Clean Work Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Dictation, !- Zone Name
|
|
Floor 1 Dictation Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Dictation Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Dictation Air Node, !- Zone Air Node Name
|
|
Floor 1 Dictation Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Dressing Room, !- Zone Name
|
|
Floor 1 Dressing Room Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Dressing Room Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Dressing Room Air Node, !- Zone Air Node Name
|
|
Floor 1 Dressing Room Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Humid, !- Zone Name
|
|
Floor 1 Humid Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Humid Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Humid Air Node, !- Zone Air Node Name
|
|
Floor 1 Humid Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 IT Hall, !- Zone Name
|
|
Floor 1 IT Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 IT Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 IT Hall Air Node,!- Zone Air Node Name
|
|
Floor 1 IT Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 IT Room, !- Zone Name
|
|
Floor 1 IT Room Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 IT Room Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 IT Room Air Node,!- Zone Air Node Name
|
|
Floor 1 IT Room Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Lobby, !- Zone Name
|
|
Floor 1 Lobby Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Lobby Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Lobby Air Node, !- Zone Air Node Name
|
|
Floor 1 Lobby Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Lobby Hall, !- Zone Name
|
|
Floor 1 Lobby Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Lobby Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Lobby Hall Air Node, !- Zone Air Node Name
|
|
Floor 1 Lobby Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Locker Room, !- Zone Name
|
|
Floor 1 Locker Room Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Locker Room Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Locker Room Air Node, !- Zone Air Node Name
|
|
Floor 1 Locker Room Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Locker Room Hall,!- Zone Name
|
|
Floor 1 Locker Room Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Locker Room Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Locker Room Hall Air Node, !- Zone Air Node Name
|
|
Floor 1 Locker Room Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Lounge, !- Zone Name
|
|
Floor 1 Lounge Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 1 Lounge Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Lounge Air Node, !- Zone Air Node Name
|
|
Floor 1 Lounge Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 MRI Control Room,!- Zone Name
|
|
Floor 1 MRI Control Room Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 MRI Control Room Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Floor 1 MRI Control Room Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 MRI Control Room Air Node, !- Zone Air Node Name
|
|
Floor 1 MRI Control Room Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 MRI Hall, !- Zone Name
|
|
Floor 1 MRI Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 MRI Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 MRI Hall Air Node, !- Zone Air Node Name
|
|
Floor 1 MRI Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 MRI Room, !- Zone Name
|
|
Floor 1 MRI Room Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 MRI Room Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Floor 1 MRI Room Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 MRI Room Air Node, !- Zone Air Node Name
|
|
Floor 1 MRI Room Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Med Gas, !- Zone Name
|
|
Floor 1 Med Gas Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Med Gas Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Med Gas Air Node,!- Zone Air Node Name
|
|
Floor 1 Med Gas Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Nourishment, !- Zone Name
|
|
Floor 1 Nourishment Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Nourishment Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Nourishment Air Node, !- Zone Air Node Name
|
|
Floor 1 Nourishment Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Nurse Hall, !- Zone Name
|
|
Floor 1 Nurse Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Nurse Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Nurse Hall Air Node, !- Zone Air Node Name
|
|
Floor 1 Nurse Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Nurse Station, !- Zone Name
|
|
Floor 1 Nurse Station Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Nurse Station Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Nurse Station Air Node, !- Zone Air Node Name
|
|
Floor 1 Nurse Station Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Office, !- Zone Name
|
|
Floor 1 Office Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 1 Office Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Office Air Node, !- Zone Air Node Name
|
|
Floor 1 Office Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Operating Room 1,!- Zone Name
|
|
Floor 1 Operating Room 1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Operating Room 1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Operating Room 1 Air Node, !- Zone Air Node Name
|
|
Floor 1 Operating Room 1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Operating Room 2,!- Zone Name
|
|
Floor 1 Operating Room 2 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Operating Room 2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Operating Room 2 Air Node, !- Zone Air Node Name
|
|
Floor 1 Operating Room 2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Operating Room 3,!- Zone Name
|
|
Floor 1 Operating Room 3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Operating Room 3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Operating Room 3 Air Node, !- Zone Air Node Name
|
|
Floor 1 Operating Room 3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 PACU, !- Zone Name
|
|
Floor 1 PACU Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 PACU Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 PACU Air Node, !- Zone Air Node Name
|
|
Floor 1 PACU Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Pre-Op Hall, !- Zone Name
|
|
Floor 1 Pre-Op Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Pre-Op Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Pre-Op Hall Air Node, !- Zone Air Node Name
|
|
Floor 1 Pre-Op Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Pre-Op Room 1, !- Zone Name
|
|
Floor 1 Pre-Op Room 1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Pre-Op Room 1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Pre-Op Room 1 Air Node, !- Zone Air Node Name
|
|
Floor 1 Pre-Op Room 1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Pre-Op Room 2, !- Zone Name
|
|
Floor 1 Pre-Op Room 2 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Pre-Op Room 2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Pre-Op Room 2 Air Node, !- Zone Air Node Name
|
|
Floor 1 Pre-Op Room 2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Procedure Room, !- Zone Name
|
|
Floor 1 Procedure Room Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Procedure Room Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Procedure Room Air Node, !- Zone Air Node Name
|
|
Floor 1 Procedure Room Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Reception, !- Zone Name
|
|
Floor 1 Reception Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Reception Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Reception Air Node, !- Zone Air Node Name
|
|
Floor 1 Reception Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Reception Hall, !- Zone Name
|
|
Floor 1 Reception Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Reception Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Reception Hall Air Node, !- Zone Air Node Name
|
|
Floor 1 Reception Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Recovery Room, !- Zone Name
|
|
Floor 1 Recovery Room Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Recovery Room Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Recovery Room Air Node, !- Zone Air Node Name
|
|
Floor 1 Recovery Room Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Scheduling, !- Zone Name
|
|
Floor 1 Scheduling Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Scheduling Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Scheduling Air Node, !- Zone Air Node Name
|
|
Floor 1 Scheduling Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Scrub, !- Zone Name
|
|
Floor 1 Scrub Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Scrub Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Scrub Air Node, !- Zone Air Node Name
|
|
Floor 1 Scrub Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Soil, !- Zone Name
|
|
Floor 1 Soil Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Soil Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
Floor 1 Soil Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Soil Air Node, !- Zone Air Node Name
|
|
Floor 1 Soil Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Soil Hold, !- Zone Name
|
|
Floor 1 Soil Hold Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Soil Hold Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Floor 1 Soil Hold Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Soil Hold Air Node, !- Zone Air Node Name
|
|
Floor 1 Soil Hold Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Soil Work, !- Zone Name
|
|
Floor 1 Soil Work Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Soil Work Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
Floor 1 Soil Work Exhaust Nodes, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Soil Work Air Node, !- Zone Air Node Name
|
|
Floor 1 Soil Work Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Step Down, !- Zone Name
|
|
Floor 1 Step Down Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Step Down Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Step Down Air Node, !- Zone Air Node Name
|
|
Floor 1 Step Down Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Sterile Hall, !- Zone Name
|
|
Floor 1 Sterile Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Sterile Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Sterile Hall Air Node, !- Zone Air Node Name
|
|
Floor 1 Sterile Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Sterile Storage, !- Zone Name
|
|
Floor 1 Sterile Storage Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Sterile Storage Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Sterile Storage Air Node, !- Zone Air Node Name
|
|
Floor 1 Sterile Storage Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Sub-Sterile, !- Zone Name
|
|
Floor 1 Sub-Sterile Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Sub-Sterile Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Sub-Sterile Air Node, !- Zone Air Node Name
|
|
Floor 1 Sub-Sterile Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Utility Hall, !- Zone Name
|
|
Floor 1 Utility Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Utility Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Utility Hall Air Node, !- Zone Air Node Name
|
|
Floor 1 Utility Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 1 Vestibule, !- Zone Name
|
|
Floor 1 Vestibule Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 1 Vestibule Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 1 Vestibule Air Node, !- Zone Air Node Name
|
|
Floor 1 Vestibule Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Conference, !- Zone Name
|
|
Floor 2 Conference Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Conference Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Conference Air Node, !- Zone Air Node Name
|
|
Floor 2 Conference Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Dictation, !- Zone Name
|
|
Floor 2 Dictation Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Dictation Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Dictation Air Node, !- Zone Air Node Name
|
|
Floor 2 Dictation Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam 1, !- Zone Name
|
|
Floor 2 Exam 1 Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam 1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam 1 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam 1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam 2, !- Zone Name
|
|
Floor 2 Exam 2 Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam 2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam 2 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam 2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam 3, !- Zone Name
|
|
Floor 2 Exam 3 Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam 3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam 3 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam 3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam 4, !- Zone Name
|
|
Floor 2 Exam 4 Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam 4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam 4 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam 4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam 5, !- Zone Name
|
|
Floor 2 Exam 5 Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam 5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam 5 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam 5 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam 6, !- Zone Name
|
|
Floor 2 Exam 6 Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam 6 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam 6 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam 6 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam 7, !- Zone Name
|
|
Floor 2 Exam 7 Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam 7 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam 7 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam 7 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam 8, !- Zone Name
|
|
Floor 2 Exam 8 Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam 8 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam 8 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam 8 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam 9, !- Zone Name
|
|
Floor 2 Exam 9 Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam 9 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam 9 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam 9 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam Hall 1, !- Zone Name
|
|
Floor 2 Exam Hall 1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam Hall 1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam Hall 1 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam Hall 1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam Hall 2, !- Zone Name
|
|
Floor 2 Exam Hall 2 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam Hall 2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam Hall 2 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam Hall 2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam Hall 3, !- Zone Name
|
|
Floor 2 Exam Hall 3 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam Hall 3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam Hall 3 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam Hall 3 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam Hall 4, !- Zone Name
|
|
Floor 2 Exam Hall 4 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam Hall 4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam Hall 4 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam Hall 4 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam Hall 5, !- Zone Name
|
|
Floor 2 Exam Hall 5 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam Hall 5 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam Hall 5 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam Hall 5 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Exam Hall 6, !- Zone Name
|
|
Floor 2 Exam Hall 6 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Exam Hall 6 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Exam Hall 6 Air Node, !- Zone Air Node Name
|
|
Floor 2 Exam Hall 6 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Lounge, !- Zone Name
|
|
Floor 2 Lounge Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 2 Lounge Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Lounge Air Node, !- Zone Air Node Name
|
|
Floor 2 Lounge Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Nurse Station 1, !- Zone Name
|
|
Floor 2 Nurse Station 1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Nurse Station 1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Nurse Station 1 Air Node, !- Zone Air Node Name
|
|
Floor 2 Nurse Station 1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Nurse Station 2, !- Zone Name
|
|
Floor 2 Nurse Station 2 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Nurse Station 2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Nurse Station 2 Air Node, !- Zone Air Node Name
|
|
Floor 2 Nurse Station 2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Office, !- Zone Name
|
|
Floor 2 Office Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 2 Office Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Office Air Node, !- Zone Air Node Name
|
|
Floor 2 Office Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Office Hall, !- Zone Name
|
|
Floor 2 Office Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Office Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Office Hall Air Node, !- Zone Air Node Name
|
|
Floor 2 Office Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Reception, !- Zone Name
|
|
Floor 2 Reception Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Reception Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Reception Air Node, !- Zone Air Node Name
|
|
Floor 2 Reception Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Reception Hall, !- Zone Name
|
|
Floor 2 Reception Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Reception Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Reception Hall Air Node, !- Zone Air Node Name
|
|
Floor 2 Reception Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Scheduling 1, !- Zone Name
|
|
Floor 2 Scheduling 1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Scheduling 1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Scheduling 1 Air Node, !- Zone Air Node Name
|
|
Floor 2 Scheduling 1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Scheduling 2, !- Zone Name
|
|
Floor 2 Scheduling 2 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Scheduling 2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Scheduling 2 Air Node, !- Zone Air Node Name
|
|
Floor 2 Scheduling 2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Work, !- Zone Name
|
|
Floor 2 Work Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Work Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Work Air Node, !- Zone Air Node Name
|
|
Floor 2 Work Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 Work Hall, !- Zone Name
|
|
Floor 2 Work Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 Work Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 Work Hall Air Node, !- Zone Air Node Name
|
|
Floor 2 Work Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 2 X-Ray, !- Zone Name
|
|
Floor 2 X-Ray Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 2 X-Ray Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 2 X-Ray Air Node, !- Zone Air Node Name
|
|
Floor 2 X-Ray Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 3 Dressing Room, !- Zone Name
|
|
Floor 3 Dressing Room Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 3 Dressing Room Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 3 Dressing Room Air Node, !- Zone Air Node Name
|
|
Floor 3 Dressing Room Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 3 Elevator Hall, !- Zone Name
|
|
Floor 3 Elevator Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 3 Elevator Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 3 Elevator Hall Air Node, !- Zone Air Node Name
|
|
Floor 3 Elevator Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 3 Humid, !- Zone Name
|
|
Floor 3 Humid Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 3 Humid Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 3 Humid Air Node, !- Zone Air Node Name
|
|
Floor 3 Humid Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 3 Locker, !- Zone Name
|
|
Floor 3 Locker Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 3 Locker Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 3 Locker Air Node, !- Zone Air Node Name
|
|
Floor 3 Locker Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 3 Lounge, !- Zone Name
|
|
Floor 3 Lounge Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 3 Lounge Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 3 Lounge Air Node, !- Zone Air Node Name
|
|
Floor 3 Lounge Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 3 Mechanical Hall, !- Zone Name
|
|
Floor 3 Mechanical Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 3 Mechanical Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 3 Mechanical Hall Air Node, !- Zone Air Node Name
|
|
Floor 3 Mechanical Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 3 Office, !- Zone Name
|
|
Floor 3 Office Equipment,!- Zone Conditioning Equipment List Name
|
|
Floor 3 Office Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 3 Office Air Node, !- Zone Air Node Name
|
|
Floor 3 Office Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 3 Office Hall, !- Zone Name
|
|
Floor 3 Office Hall Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 3 Office Hall Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 3 Office Hall Air Node, !- Zone Air Node Name
|
|
Floor 3 Office Hall Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 3 Physical Therapy 1, !- Zone Name
|
|
Floor 3 Physical Therapy 1 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 3 Physical Therapy 1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 3 Physical Therapy 1 Air Node, !- Zone Air Node Name
|
|
Floor 3 Physical Therapy 1 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 3 Physical Therapy 2, !- Zone Name
|
|
Floor 3 Physical Therapy 2 Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 3 Physical Therapy 2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 3 Physical Therapy 2 Air Node, !- Zone Air Node Name
|
|
Floor 3 Physical Therapy 2 Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 3 Treatment, !- Zone Name
|
|
Floor 3 Treatment Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 3 Treatment Inlet Nodes, !- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 3 Treatment Air Node, !- Zone Air Node Name
|
|
Floor 3 Treatment Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:EquipmentConnections,
|
|
Floor 3 Work, !- Zone Name
|
|
Floor 3 Work Equipment, !- Zone Conditioning Equipment List Name
|
|
Floor 3 Work Inlet Nodes,!- Zone Air Inlet Node or NodeList Name
|
|
, !- Zone Air Exhaust Node or NodeList Name
|
|
Floor 3 Work Air Node, !- Zone Air Node Name
|
|
Floor 3 Work Return Air Node Name; !- Zone Return Air Node or NodeList Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Anesthesia VAV Box, !- Name
|
|
Floor 1 Anesthesia VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Anesthesia VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Bio Haz VAV Box, !- Name
|
|
Floor 1 Bio Haz VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Bio Haz VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Cafe VAV Box, !- Name
|
|
Floor 1 Cafe VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Cafe VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Clean VAV Box, !- Name
|
|
Floor 1 Clean VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Clean VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Clean Work VAV Box, !- Name
|
|
Floor 1 Clean Work VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Clean Work VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Dictation VAV Box, !- Name
|
|
Floor 1 Dictation VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Dictation VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Dressing Room VAV Box, !- Name
|
|
Floor 1 Dressing Room VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Dressing Room VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Humid VAV Box, !- Name
|
|
Floor 1 Humid VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Humid VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 IT Hall VAV Box, !- Name
|
|
Floor 1 IT Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 IT Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 IT Room VAV Box, !- Name
|
|
Floor 1 IT Room VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 IT Room VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Lobby Hall VAV Box, !- Name
|
|
Floor 1 Lobby Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Lobby Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Lobby VAV Box, !- Name
|
|
Floor 1 Lobby VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Lobby VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Locker Room Hall VAV Box, !- Name
|
|
Floor 1 Locker Room Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Locker Room Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Locker Room VAV Box, !- Name
|
|
Floor 1 Locker Room VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Locker Room VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Lounge VAV Box, !- Name
|
|
Floor 1 Lounge VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Lounge VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 MRI Control Room VAV Box, !- Name
|
|
Floor 1 MRI Control Room VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 MRI Control Room VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 MRI Hall VAV Box,!- Name
|
|
Floor 1 MRI Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 MRI Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 MRI Room VAV Box,!- Name
|
|
Floor 1 MRI Room VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 MRI Room VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Med Gas VAV Box, !- Name
|
|
Floor 1 Med Gas VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Med Gas VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Nourishment VAV Box, !- Name
|
|
Floor 1 Nourishment VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Nourishment VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Nurse Hall VAV Box, !- Name
|
|
Floor 1 Nurse Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Nurse Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Nurse Station VAV Box, !- Name
|
|
Floor 1 Nurse Station VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Nurse Station VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Office VAV Box, !- Name
|
|
Floor 1 Office VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Office VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Operating Room 1 VAV Box, !- Name
|
|
Floor 1 Operating Room 1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Operating Room 1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Operating Room 2 VAV Box, !- Name
|
|
Floor 1 Operating Room 2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Operating Room 2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Operating Room 3 VAV Box, !- Name
|
|
Floor 1 Operating Room 3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Operating Room 3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 PACU VAV Box, !- Name
|
|
Floor 1 PACU VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 PACU VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Pre-Op Hall VAV Box, !- Name
|
|
Floor 1 Pre-Op Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Pre-Op Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Pre-Op Room 1 VAV Box, !- Name
|
|
Floor 1 Pre-Op Room 1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Pre-Op Room 1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Pre-Op Room 2 VAV Box, !- Name
|
|
Floor 1 Pre-Op Room 2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Pre-Op Room 2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Procedure Room VAV Box, !- Name
|
|
Floor 1 Procedure Room VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Procedure Room VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Reception Hall VAV Box, !- Name
|
|
Floor 1 Reception Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Reception Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Reception VAV Box, !- Name
|
|
Floor 1 Reception VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Reception VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Recovery Room VAV Box, !- Name
|
|
Floor 1 Recovery Room VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Recovery Room VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Scheduling VAV Box, !- Name
|
|
Floor 1 Scheduling VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Scheduling VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Scrub VAV Box, !- Name
|
|
Floor 1 Scrub VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Scrub VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Soil Hold VAV Box, !- Name
|
|
Floor 1 Soil Hold VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Soil Hold VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Soil VAV Box, !- Name
|
|
Floor 1 Soil VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Soil VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Soil Work VAV Box, !- Name
|
|
Floor 1 Soil Work VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Soil Work VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Step Down VAV Box, !- Name
|
|
Floor 1 Step Down VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Step Down VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Sterile Hall VAV Box, !- Name
|
|
Floor 1 Sterile Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Sterile Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Sterile Storage VAV Box, !- Name
|
|
Floor 1 Sterile Storage VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Sterile Storage VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Sub-Sterile VAV Box, !- Name
|
|
Floor 1 Sub-Sterile VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Sub-Sterile VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Utility Hall VAV Box, !- Name
|
|
Floor 1 Utility Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Utility Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 1 Vestibule VAV Box, !- Name
|
|
Floor 1 Vestibule VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 1 Vestibule VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Conference VAV Box, !- Name
|
|
Floor 2 Conference VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Conference VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Dictation VAV Box, !- Name
|
|
Floor 2 Dictation VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Dictation VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam 1 VAV Box, !- Name
|
|
Floor 2 Exam 1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam 1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam 2 VAV Box, !- Name
|
|
Floor 2 Exam 2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam 2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam 3 VAV Box, !- Name
|
|
Floor 2 Exam 3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam 3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam 4 VAV Box, !- Name
|
|
Floor 2 Exam 4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam 4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam 5 VAV Box, !- Name
|
|
Floor 2 Exam 5 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam 5 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam 6 VAV Box, !- Name
|
|
Floor 2 Exam 6 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam 6 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam 7 VAV Box, !- Name
|
|
Floor 2 Exam 7 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam 7 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam 8 VAV Box, !- Name
|
|
Floor 2 Exam 8 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam 8 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam 9 VAV Box, !- Name
|
|
Floor 2 Exam 9 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam 9 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam Hall 1 VAV Box, !- Name
|
|
Floor 2 Exam Hall 1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam Hall 1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam Hall 2 VAV Box, !- Name
|
|
Floor 2 Exam Hall 2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam Hall 2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam Hall 3 VAV Box, !- Name
|
|
Floor 2 Exam Hall 3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam Hall 3 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam Hall 4 VAV Box, !- Name
|
|
Floor 2 Exam Hall 4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam Hall 4 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam Hall 5 VAV Box, !- Name
|
|
Floor 2 Exam Hall 5 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam Hall 5 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Exam Hall 6 VAV Box, !- Name
|
|
Floor 2 Exam Hall 6 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Exam Hall 6 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Lounge VAV Box, !- Name
|
|
Floor 2 Lounge VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Lounge VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Nurse Station 1 VAV Box, !- Name
|
|
Floor 2 Nurse Station 1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Nurse Station 1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Nurse Station 2 VAV Box, !- Name
|
|
Floor 2 Nurse Station 2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Nurse Station 2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Office Hall VAV Box, !- Name
|
|
Floor 2 Office Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Office Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Office VAV Box, !- Name
|
|
Floor 2 Office VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Office VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Reception Hall VAV Box, !- Name
|
|
Floor 2 Reception Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Reception Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Reception VAV Box, !- Name
|
|
Floor 2 Reception VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Reception VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Scheduling 1 VAV Box, !- Name
|
|
Floor 2 Scheduling 1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Scheduling 1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Scheduling 2 VAV Box, !- Name
|
|
Floor 2 Scheduling 2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Scheduling 2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Work Hall VAV Box, !- Name
|
|
Floor 2 Work Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Work Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 Work VAV Box, !- Name
|
|
Floor 2 Work VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 Work VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 2 X-Ray VAV Box, !- Name
|
|
Floor 2 X-Ray VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 2 X-Ray VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 3 Dressing Room VAV Box, !- Name
|
|
Floor 3 Dressing Room VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 3 Dressing Room VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 3 Elevator Hall VAV Box, !- Name
|
|
Floor 3 Elevator Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 3 Elevator Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 3 Humid VAV Box, !- Name
|
|
Floor 3 Humid VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 3 Humid VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 3 Locker VAV Box, !- Name
|
|
Floor 3 Locker VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 3 Locker VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 3 Lounge VAV Box, !- Name
|
|
Floor 3 Lounge VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 3 Lounge VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 3 Mechanical Hall VAV Box, !- Name
|
|
Floor 3 Mechanical Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 3 Mechanical Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 3 Office Hall VAV Box, !- Name
|
|
Floor 3 Office Hall VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 3 Office Hall VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 3 Office VAV Box, !- Name
|
|
Floor 3 Office VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 3 Office VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 3 Physical Therapy 1 VAV Box, !- Name
|
|
Floor 3 Physical Therapy 1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 3 Physical Therapy 1 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 3 Physical Therapy 2 VAV Box, !- Name
|
|
Floor 3 Physical Therapy 2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 3 Physical Therapy 2 VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 3 Treatment VAV Box, !- Name
|
|
Floor 3 Treatment VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 3 Treatment VAV Box Component; !- Air Terminal Name
|
|
|
|
ZoneHVAC:AirDistributionUnit,
|
|
Floor 3 Work VAV Box, !- Name
|
|
Floor 3 Work VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name
|
|
AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type
|
|
Floor 3 Work VAV Box Component; !- Air Terminal Name
|
|
|
|
NodeList,
|
|
AHU-1_OANode List, !- Name
|
|
AHU-1_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
AHU-2_OANode List, !- Name
|
|
AHU-2_OAInlet Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Anesthesia Exhaust Nodes, !- Name
|
|
Floor 1 Anesthesia Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Anesthesia Inlet Nodes, !- Name
|
|
Floor 1 Anesthesia VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Bio Haz Inlet Nodes, !- Name
|
|
Floor 1 Bio Haz VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Cafe Inlet Nodes,!- Name
|
|
Floor 1 Cafe VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Clean Inlet Nodes, !- Name
|
|
Floor 1 Clean VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Clean Work Inlet Nodes, !- Name
|
|
Floor 1 Clean Work VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Dictation Inlet Nodes, !- Name
|
|
Floor 1 Dictation VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Dressing Room Inlet Nodes, !- Name
|
|
Floor 1 Dressing Room VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Humid Inlet Nodes, !- Name
|
|
Floor 1 Humid VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 IT Hall Inlet Nodes, !- Name
|
|
Floor 1 IT Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 IT Room Inlet Nodes, !- Name
|
|
Floor 1 IT Room VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Lobby Hall Inlet Nodes, !- Name
|
|
Floor 1 Lobby Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Lobby Inlet Nodes, !- Name
|
|
Floor 1 Lobby VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Lobby Toilet Exhaust Nodes, !- Name
|
|
Floor 1 Lobby Toilet Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Locker Room Hall Inlet Nodes, !- Name
|
|
Floor 1 Locker Room Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Locker Room Inlet Nodes, !- Name
|
|
Floor 1 Locker Room VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Lounge Inlet Nodes, !- Name
|
|
Floor 1 Lounge VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 MRI Control Room Exhaust Nodes, !- Name
|
|
Floor 1 MRI Control Room Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 MRI Control Room Inlet Nodes, !- Name
|
|
Floor 1 MRI Control Room VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 MRI Hall Inlet Nodes, !- Name
|
|
Floor 1 MRI Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 MRI Room Exhaust Nodes, !- Name
|
|
Floor 1 MRI Room Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 MRI Room Inlet Nodes, !- Name
|
|
Floor 1 MRI Room VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 MRI Toilet Exhaust Nodes, !- Name
|
|
Floor 1 MRI Toilet Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Med Gas Inlet Nodes, !- Name
|
|
Floor 1 Med Gas VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Nourishment Inlet Nodes, !- Name
|
|
Floor 1 Nourishment VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Nurse Hall Inlet Nodes, !- Name
|
|
Floor 1 Nurse Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Nurse Station Inlet Nodes, !- Name
|
|
Floor 1 Nurse Station VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Nurse Toilet Exhaust Nodes, !- Name
|
|
Floor 1 Nurse Toilet Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Office Inlet Nodes, !- Name
|
|
Floor 1 Office VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Operating Room 1 Inlet Nodes, !- Name
|
|
Floor 1 Operating Room 1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Operating Room 2 Inlet Nodes, !- Name
|
|
Floor 1 Operating Room 2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Operating Room 3 Inlet Nodes, !- Name
|
|
Floor 1 Operating Room 3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 PACU Inlet Nodes,!- Name
|
|
Floor 1 PACU VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Pre-Op Hall Inlet Nodes, !- Name
|
|
Floor 1 Pre-Op Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Pre-Op Room 1 Inlet Nodes, !- Name
|
|
Floor 1 Pre-Op Room 1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Pre-Op Room 2 Inlet Nodes, !- Name
|
|
Floor 1 Pre-Op Room 2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Pre-Op Toilet Exhaust Nodes, !- Name
|
|
Floor 1 Pre-Op Toilet Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Procedure Room Inlet Nodes, !- Name
|
|
Floor 1 Procedure Room VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Reception Hall Inlet Nodes, !- Name
|
|
Floor 1 Reception Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Reception Inlet Nodes, !- Name
|
|
Floor 1 Reception VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Recovery Room Inlet Nodes, !- Name
|
|
Floor 1 Recovery Room VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Scheduling Inlet Nodes, !- Name
|
|
Floor 1 Scheduling VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Scrub Inlet Nodes, !- Name
|
|
Floor 1 Scrub VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Soil Exhaust Nodes, !- Name
|
|
Floor 1 Soil Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Soil Hold Exhaust Nodes, !- Name
|
|
Floor 1 Soil Hold Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Soil Hold Inlet Nodes, !- Name
|
|
Floor 1 Soil Hold VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Soil Inlet Nodes,!- Name
|
|
Floor 1 Soil VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Soil Work Exhaust Nodes, !- Name
|
|
Floor 1 Soil Work Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Soil Work Inlet Nodes, !- Name
|
|
Floor 1 Soil Work VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Step Down Inlet Nodes, !- Name
|
|
Floor 1 Step Down VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Sterile Hall Inlet Nodes, !- Name
|
|
Floor 1 Sterile Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Sterile Storage Inlet Nodes, !- Name
|
|
Floor 1 Sterile Storage VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Sub-Sterile Inlet Nodes, !- Name
|
|
Floor 1 Sub-Sterile VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Utility Hall Inlet Nodes, !- Name
|
|
Floor 1 Utility Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 1 Vestibule Inlet Nodes, !- Name
|
|
Floor 1 Vestibule VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Conference Inlet Nodes, !- Name
|
|
Floor 2 Conference VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Conference Toilet Exhaust Nodes, !- Name
|
|
Floor 2 Conference Toilet Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Dictation Inlet Nodes, !- Name
|
|
Floor 2 Dictation VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam 1 Inlet Nodes, !- Name
|
|
Floor 2 Exam 1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam 2 Inlet Nodes, !- Name
|
|
Floor 2 Exam 2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam 3 Inlet Nodes, !- Name
|
|
Floor 2 Exam 3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam 4 Inlet Nodes, !- Name
|
|
Floor 2 Exam 4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam 5 Inlet Nodes, !- Name
|
|
Floor 2 Exam 5 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam 6 Inlet Nodes, !- Name
|
|
Floor 2 Exam 6 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam 7 Inlet Nodes, !- Name
|
|
Floor 2 Exam 7 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam 8 Inlet Nodes, !- Name
|
|
Floor 2 Exam 8 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam 9 Inlet Nodes, !- Name
|
|
Floor 2 Exam 9 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam Hall 1 Inlet Nodes, !- Name
|
|
Floor 2 Exam Hall 1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam Hall 2 Inlet Nodes, !- Name
|
|
Floor 2 Exam Hall 2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam Hall 3 Inlet Nodes, !- Name
|
|
Floor 2 Exam Hall 3 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam Hall 4 Inlet Nodes, !- Name
|
|
Floor 2 Exam Hall 4 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam Hall 5 Inlet Nodes, !- Name
|
|
Floor 2 Exam Hall 5 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Exam Hall 6 Inlet Nodes, !- Name
|
|
Floor 2 Exam Hall 6 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Lounge Inlet Nodes, !- Name
|
|
Floor 2 Lounge VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Nurse Station 1 Inlet Nodes, !- Name
|
|
Floor 2 Nurse Station 1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Nurse Station 2 Inlet Nodes, !- Name
|
|
Floor 2 Nurse Station 2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Office Hall Inlet Nodes, !- Name
|
|
Floor 2 Office Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Office Inlet Nodes, !- Name
|
|
Floor 2 Office VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Reception Hall Inlet Nodes, !- Name
|
|
Floor 2 Reception Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Reception Inlet Nodes, !- Name
|
|
Floor 2 Reception VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Reception Toilet Exhaust Nodes, !- Name
|
|
Floor 2 Reception Toilet Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Scheduling 1 Inlet Nodes, !- Name
|
|
Floor 2 Scheduling 1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Scheduling 2 Inlet Nodes, !- Name
|
|
Floor 2 Scheduling 2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Work Hall Inlet Nodes, !- Name
|
|
Floor 2 Work Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Work Inlet Nodes,!- Name
|
|
Floor 2 Work VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 Work Toilet Exhaust Nodes, !- Name
|
|
Floor 2 Work Toilet Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 2 X-Ray Inlet Nodes, !- Name
|
|
Floor 2 X-Ray VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Dressing Room Inlet Nodes, !- Name
|
|
Floor 3 Dressing Room VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Elevator Hall Inlet Nodes, !- Name
|
|
Floor 3 Elevator Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Humid Inlet Nodes, !- Name
|
|
Floor 3 Humid VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Locker Inlet Nodes, !- Name
|
|
Floor 3 Locker VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Lounge Inlet Nodes, !- Name
|
|
Floor 3 Lounge VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Lounge Toilet Exhaust Nodes, !- Name
|
|
Floor 3 Lounge Toilet Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Mechanical Hall Inlet Nodes, !- Name
|
|
Floor 3 Mechanical Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Office Hall Inlet Nodes, !- Name
|
|
Floor 3 Office Hall VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Office Inlet Nodes, !- Name
|
|
Floor 3 Office VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Office Toilet Exhaust Nodes, !- Name
|
|
Floor 3 Office Toilet Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Physical Therapy 1 Inlet Nodes, !- Name
|
|
Floor 3 Physical Therapy 1 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Physical Therapy 2 Inlet Nodes, !- Name
|
|
Floor 3 Physical Therapy 2 VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Physical Therapy Toilet Exhaust Nodes, !- Name
|
|
Floor 3 Physical Therapy Toilet Exhaust Fan Node; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Treatment Inlet Nodes, !- Name
|
|
Floor 3 Treatment VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
NodeList,
|
|
Floor 3 Work Inlet Nodes,!- Name
|
|
Floor 3 Work VAV Box Outlet Node Name; !- Node 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
AHU-1 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
AHU-1 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManagerAssignmentList,
|
|
AHU-2 Availability Manager List, !- Name
|
|
AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type
|
|
AHU-2 Availability Manager; !- Availability Manager 1 Name
|
|
|
|
AvailabilityManager:NightCycle,
|
|
AHU-1 Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
AHU-1_Fan_Sch, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
AvailabilityManager:NightCycle,
|
|
AHU-2 Availability Manager, !- Name
|
|
ALWAYS_ON, !- Applicability Schedule Name
|
|
AHU-2_Fan_Sch, !- Fan Schedule Name
|
|
CycleOnAny, !- Control Type
|
|
1.0, !- Thermostat Tolerance {deltaC}
|
|
FixedRunTime, !- Cycling Run Time Control Type
|
|
1800; !- Cycling Run Time {s}
|
|
|
|
BranchList,
|
|
AHU-1 Air Loop Branches, !- Name
|
|
AHU-1 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
BranchList,
|
|
AHU-2 Air Loop Branches, !- Name
|
|
AHU-2 Air Loop Main Branch; !- Branch 1 Name
|
|
|
|
Branch,
|
|
AHU-1 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
AHU-1_OA, !- Component 1 Name
|
|
AHU-1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
AHU-1_OA-AHU-1_CoolCNode,!- Component 1 Outlet Node Name
|
|
CoilSystem:Cooling:DX, !- Component 2 Object Type
|
|
AHU-1_CoolC, !- Component 2 Name
|
|
AHU-1_OA-AHU-1_CoolCNode,!- Component 2 Inlet Node Name
|
|
AHU-1_CoolC-AHU-1_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Water, !- Component 3 Object Type
|
|
AHU-1_HeatC, !- Component 3 Name
|
|
AHU-1_CoolC-AHU-1_HeatCNode, !- Component 3 Inlet Node Name
|
|
AHU-1_HeatC-AHU-1_FanNode, !- Component 3 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 4 Object Type
|
|
AHU-1_Fan, !- Component 4 Name
|
|
AHU-1_HeatC-AHU-1_FanNode, !- Component 4 Inlet Node Name
|
|
AHU-1_Fan-AHU-1 HumidifierNode, !- Component 4 Outlet Node Name
|
|
Humidifier:Steam:Electric, !- Component 5 Object Type
|
|
AHU-1 Humidifier, !- Component 5 Name
|
|
AHU-1_Fan-AHU-1 HumidifierNode, !- Component 5 Inlet Node Name
|
|
AHU-1 Supply Equipment Outlet Node; !- Component 5 Outlet Node Name
|
|
|
|
Branch,
|
|
AHU-2 Air Loop Main Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type
|
|
AHU-2_OA, !- Component 1 Name
|
|
AHU-2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name
|
|
AHU-2_OA-AHU-2_CoolCNode,!- Component 1 Outlet Node Name
|
|
CoilSystem:Cooling:DX, !- Component 2 Object Type
|
|
AHU-2_CoolC, !- Component 2 Name
|
|
AHU-2_OA-AHU-2_CoolCNode,!- Component 2 Inlet Node Name
|
|
AHU-2_CoolC-AHU-2_HeatCNode, !- Component 2 Outlet Node Name
|
|
Coil:Heating:Water, !- Component 3 Object Type
|
|
AHU-2_HeatC, !- Component 3 Name
|
|
AHU-2_CoolC-AHU-2_HeatCNode, !- Component 3 Inlet Node Name
|
|
AHU-2_HeatC-AHU-2_FanNode, !- Component 3 Outlet Node Name
|
|
Fan:VariableVolume, !- Component 4 Object Type
|
|
AHU-2_Fan, !- Component 4 Name
|
|
AHU-2_HeatC-AHU-2_FanNode, !- Component 4 Inlet Node Name
|
|
AHU-2 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
AHU-1_Controllers, !- Name
|
|
Controller:WaterCoil, !- Controller 1 Object Type
|
|
AHU-1_HeatC_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
AHU-1_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
AHU-1_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
AHU-2_Controllers, !- Name
|
|
Controller:WaterCoil, !- Controller 1 Object Type
|
|
AHU-2_HeatC_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:ControllerList,
|
|
AHU-2_OA_Controllers, !- Name
|
|
Controller:OutdoorAir, !- Controller 1 Object Type
|
|
AHU-2_OA_Controller; !- Controller 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
AHU-1_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
AHU-1_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem:EquipmentList,
|
|
AHU-2_OA_Equipment, !- Name
|
|
OutdoorAir:Mixer, !- Component 1 Object Type
|
|
AHU-2_OAMixing Box; !- Component 1 Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
AHU-1_OA, !- Name
|
|
AHU-1_OA_Controllers, !- Controller List Name
|
|
AHU-1_OA_Equipment; !- Outdoor Air Equipment List Name
|
|
|
|
AirLoopHVAC:OutdoorAirSystem,
|
|
AHU-2_OA, !- Name
|
|
AHU-2_OA_Controllers, !- Controller List Name
|
|
AHU-2_OA_Equipment; !- Outdoor Air Equipment List Name
|
|
|
|
OutdoorAir:NodeList,
|
|
AHU-1_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:NodeList,
|
|
AHU-2_OANode List; !- Node or NodeList Name 1
|
|
|
|
OutdoorAir:Node,
|
|
AHU-1_CoolC Cond OA node;!- Name
|
|
|
|
OutdoorAir:Node,
|
|
AHU-1_CoolCOA Ref node; !- Name
|
|
|
|
OutdoorAir:Node,
|
|
AHU-2_CoolC Cond OA node;!- Name
|
|
|
|
OutdoorAir:Node,
|
|
AHU-2_CoolCOA Ref node; !- Name
|
|
|
|
OutdoorAir:Mixer,
|
|
AHU-1_OAMixing Box, !- Name
|
|
AHU-1_OA-AHU-1_CoolCNode,!- Mixed Air Node Name
|
|
AHU-1_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
AHU-1_OARelief Node, !- Relief Air Stream Node Name
|
|
AHU-1 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
OutdoorAir:Mixer,
|
|
AHU-2_OAMixing Box, !- Name
|
|
AHU-2_OA-AHU-2_CoolCNode,!- Mixed Air Node Name
|
|
AHU-2_OAInlet Node, !- Outdoor Air Stream Node Name
|
|
AHU-2_OARelief Node, !- Relief Air Stream Node Name
|
|
AHU-2 Supply Equipment Inlet Node; !- Return Air Stream Node Name
|
|
|
|
SetpointManager:MixedAir,
|
|
AHU-1_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
AHU-1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
AHU-1_HeatC-AHU-1_FanNode, !- Fan Inlet Node Name
|
|
AHU-1_Fan-AHU-1 HumidifierNode, !- Fan Outlet Node Name
|
|
AHU-1_CoolC-AHU-1_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
AHU-1_HeatC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
AHU-1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
AHU-1_HeatC-AHU-1_FanNode, !- Fan Inlet Node Name
|
|
AHU-1_Fan-AHU-1 HumidifierNode, !- Fan Outlet Node Name
|
|
AHU-1_HeatC-AHU-1_FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
AHU-1_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
AHU-1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
AHU-1_HeatC-AHU-1_FanNode, !- Fan Inlet Node Name
|
|
AHU-1_Fan-AHU-1 HumidifierNode, !- Fan Outlet Node Name
|
|
AHU-1_OA-AHU-1_CoolCNode;!- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
AHU-2_CoolC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
AHU-2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
AHU-2_HeatC-AHU-2_FanNode, !- Fan Inlet Node Name
|
|
AHU-2 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
AHU-2_CoolC-AHU-2_HeatCNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
AHU-2_HeatC SAT Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
AHU-2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
AHU-2_HeatC-AHU-2_FanNode, !- Fan Inlet Node Name
|
|
AHU-2 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
AHU-2_HeatC-AHU-2_FanNode; !- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:MixedAir,
|
|
AHU-2_OAMixed Air Temp Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
AHU-2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name
|
|
AHU-2_HeatC-AHU-2_FanNode, !- Fan Inlet Node Name
|
|
AHU-2 Supply Equipment Outlet Node, !- Fan Outlet Node Name
|
|
AHU-2_OA-AHU-2_CoolCNode;!- Setpoint Node or NodeList Name
|
|
|
|
SetpointManager:SingleZone:Humidity:Minimum,
|
|
AHU-1 Humidifier HUMRAT setpoint, !- Name
|
|
AHU-1 Supply Equipment Outlet Node, !- Setpoint Node or NodeList Name
|
|
FLOOR 1 OPERATING ROOM 1 Air Node; !- Control Zone Air Node Name
|
|
|
|
SetpointManager:SingleZone:Humidity:Maximum,
|
|
AHU-1_CoolC HUMRAT setpoint, !- Name
|
|
AHU-1_CoolC-AHU-1_HeatCNode, !- Setpoint Node or NodeList Name
|
|
FLOOR 1 OPERATING ROOM 1 Air Node; !- Control Zone Air Node Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
AHU-1, !- Name
|
|
AHU-1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
AHU-1 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:SupplyPath,
|
|
AHU-2, !- Name
|
|
AHU-2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name
|
|
AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type
|
|
AHU-2 Supply Air Splitter; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
AHU-1 Supply Air Splitter, !- Name
|
|
AHU-1 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Floor 1 Anesthesia VAV Box Inlet Node Name, !- Outlet 1 Node Name
|
|
Floor 1 Bio Haz VAV Box Inlet Node Name, !- Outlet 2 Node Name
|
|
Floor 1 Cafe VAV Box Inlet Node Name, !- Outlet 3 Node Name
|
|
Floor 1 Clean VAV Box Inlet Node Name, !- Outlet 4 Node Name
|
|
Floor 1 Clean Work VAV Box Inlet Node Name, !- Outlet 5 Node Name
|
|
Floor 1 Dictation VAV Box Inlet Node Name, !- Outlet 6 Node Name
|
|
Floor 1 Dressing Room VAV Box Inlet Node Name, !- Outlet 7 Node Name
|
|
Floor 1 Humid VAV Box Inlet Node Name, !- Outlet 8 Node Name
|
|
Floor 1 IT Hall VAV Box Inlet Node Name, !- Outlet 9 Node Name
|
|
Floor 1 IT Room VAV Box Inlet Node Name, !- Outlet 10 Node Name
|
|
Floor 1 Lobby VAV Box Inlet Node Name, !- Outlet 11 Node Name
|
|
Floor 1 Lobby Hall VAV Box Inlet Node Name, !- Outlet 12 Node Name
|
|
Floor 1 Locker Room VAV Box Inlet Node Name, !- Outlet 13 Node Name
|
|
Floor 1 Locker Room Hall VAV Box Inlet Node Name, !- Outlet 14 Node Name
|
|
Floor 1 Lounge VAV Box Inlet Node Name, !- Outlet 15 Node Name
|
|
Floor 1 Med Gas VAV Box Inlet Node Name, !- Outlet 16 Node Name
|
|
Floor 1 MRI Control Room VAV Box Inlet Node Name, !- Outlet 17 Node Name
|
|
Floor 1 MRI Hall VAV Box Inlet Node Name, !- Outlet 18 Node Name
|
|
Floor 1 MRI Room VAV Box Inlet Node Name, !- Outlet 19 Node Name
|
|
Floor 1 Nourishment VAV Box Inlet Node Name, !- Outlet 20 Node Name
|
|
Floor 1 Nurse Hall VAV Box Inlet Node Name, !- Outlet 21 Node Name
|
|
Floor 1 Nurse Station VAV Box Inlet Node Name, !- Outlet 22 Node Name
|
|
Floor 1 Office VAV Box Inlet Node Name, !- Outlet 23 Node Name
|
|
Floor 1 Operating Room 1 VAV Box Inlet Node Name, !- Outlet 24 Node Name
|
|
Floor 1 Operating Room 2 VAV Box Inlet Node Name, !- Outlet 25 Node Name
|
|
Floor 1 Operating Room 3 VAV Box Inlet Node Name, !- Outlet 26 Node Name
|
|
Floor 1 PACU VAV Box Inlet Node Name, !- Outlet 27 Node Name
|
|
Floor 1 Pre-Op Hall VAV Box Inlet Node Name, !- Outlet 28 Node Name
|
|
Floor 1 Pre-Op Room 1 VAV Box Inlet Node Name, !- Outlet 29 Node Name
|
|
Floor 1 Pre-Op Room 2 VAV Box Inlet Node Name, !- Outlet 30 Node Name
|
|
Floor 1 Procedure Room VAV Box Inlet Node Name, !- Outlet 31 Node Name
|
|
Floor 1 Reception VAV Box Inlet Node Name, !- Outlet 32 Node Name
|
|
Floor 1 Reception Hall VAV Box Inlet Node Name, !- Outlet 33 Node Name
|
|
Floor 1 Recovery Room VAV Box Inlet Node Name, !- Outlet 34 Node Name
|
|
Floor 1 Scheduling VAV Box Inlet Node Name, !- Outlet 35 Node Name
|
|
Floor 1 Scrub VAV Box Inlet Node Name, !- Outlet 36 Node Name
|
|
Floor 1 Soil VAV Box Inlet Node Name, !- Outlet 37 Node Name
|
|
Floor 1 Soil Hold VAV Box Inlet Node Name, !- Outlet 38 Node Name
|
|
Floor 1 Soil Work VAV Box Inlet Node Name, !- Outlet 39 Node Name
|
|
Floor 1 Step Down VAV Box Inlet Node Name, !- Outlet 40 Node Name
|
|
Floor 1 Sterile Hall VAV Box Inlet Node Name, !- Outlet 41 Node Name
|
|
Floor 1 Sterile Storage VAV Box Inlet Node Name, !- Outlet 42 Node Name
|
|
Floor 1 Sub-Sterile VAV Box Inlet Node Name, !- Outlet 43 Node Name
|
|
Floor 1 Utility Hall VAV Box Inlet Node Name, !- Outlet 44 Node Name
|
|
Floor 1 Vestibule VAV Box Inlet Node Name; !- Outlet 45 Node Name
|
|
|
|
AirLoopHVAC:ZoneSplitter,
|
|
AHU-2 Supply Air Splitter, !- Name
|
|
AHU-2 Zone Equipment Inlet Node, !- Inlet Node Name
|
|
Floor 2 Conference VAV Box Inlet Node Name, !- Outlet 1 Node Name
|
|
Floor 2 Dictation VAV Box Inlet Node Name, !- Outlet 2 Node Name
|
|
Floor 2 Exam 1 VAV Box Inlet Node Name, !- Outlet 3 Node Name
|
|
Floor 2 Exam 2 VAV Box Inlet Node Name, !- Outlet 4 Node Name
|
|
Floor 2 Exam 3 VAV Box Inlet Node Name, !- Outlet 5 Node Name
|
|
Floor 2 Exam 4 VAV Box Inlet Node Name, !- Outlet 6 Node Name
|
|
Floor 2 Exam 5 VAV Box Inlet Node Name, !- Outlet 7 Node Name
|
|
Floor 2 Exam 6 VAV Box Inlet Node Name, !- Outlet 8 Node Name
|
|
Floor 2 Exam 7 VAV Box Inlet Node Name, !- Outlet 9 Node Name
|
|
Floor 2 Exam 8 VAV Box Inlet Node Name, !- Outlet 10 Node Name
|
|
Floor 2 Exam 9 VAV Box Inlet Node Name, !- Outlet 11 Node Name
|
|
Floor 2 Exam Hall 1 VAV Box Inlet Node Name, !- Outlet 12 Node Name
|
|
Floor 2 Exam Hall 2 VAV Box Inlet Node Name, !- Outlet 13 Node Name
|
|
Floor 2 Exam Hall 3 VAV Box Inlet Node Name, !- Outlet 14 Node Name
|
|
Floor 2 Exam Hall 4 VAV Box Inlet Node Name, !- Outlet 15 Node Name
|
|
Floor 2 Exam Hall 5 VAV Box Inlet Node Name, !- Outlet 16 Node Name
|
|
Floor 2 Exam Hall 6 VAV Box Inlet Node Name, !- Outlet 17 Node Name
|
|
Floor 2 Lounge VAV Box Inlet Node Name, !- Outlet 18 Node Name
|
|
Floor 2 Nurse Station 1 VAV Box Inlet Node Name, !- Outlet 19 Node Name
|
|
Floor 2 Nurse Station 2 VAV Box Inlet Node Name, !- Outlet 20 Node Name
|
|
Floor 2 Office VAV Box Inlet Node Name, !- Outlet 21 Node Name
|
|
Floor 2 Office Hall VAV Box Inlet Node Name, !- Outlet 22 Node Name
|
|
Floor 2 Reception VAV Box Inlet Node Name, !- Outlet 23 Node Name
|
|
Floor 2 Reception Hall VAV Box Inlet Node Name, !- Outlet 24 Node Name
|
|
Floor 2 Scheduling 1 VAV Box Inlet Node Name, !- Outlet 25 Node Name
|
|
Floor 2 Scheduling 2 VAV Box Inlet Node Name, !- Outlet 26 Node Name
|
|
Floor 2 Work VAV Box Inlet Node Name, !- Outlet 27 Node Name
|
|
Floor 2 Work Hall VAV Box Inlet Node Name, !- Outlet 28 Node Name
|
|
Floor 2 X-Ray VAV Box Inlet Node Name, !- Outlet 29 Node Name
|
|
Floor 3 Dressing Room VAV Box Inlet Node Name, !- Outlet 30 Node Name
|
|
Floor 3 Elevator Hall VAV Box Inlet Node Name, !- Outlet 31 Node Name
|
|
Floor 3 Humid VAV Box Inlet Node Name, !- Outlet 32 Node Name
|
|
Floor 3 Locker VAV Box Inlet Node Name, !- Outlet 33 Node Name
|
|
Floor 3 Lounge VAV Box Inlet Node Name, !- Outlet 34 Node Name
|
|
Floor 3 Mechanical Hall VAV Box Inlet Node Name, !- Outlet 35 Node Name
|
|
Floor 3 Office VAV Box Inlet Node Name, !- Outlet 36 Node Name
|
|
Floor 3 Office Hall VAV Box Inlet Node Name, !- Outlet 37 Node Name
|
|
Floor 3 Physical Therapy 1 VAV Box Inlet Node Name, !- Outlet 38 Node Name
|
|
Floor 3 Physical Therapy 2 VAV Box Inlet Node Name, !- Outlet 39 Node Name
|
|
Floor 3 Treatment VAV Box Inlet Node Name, !- Outlet 40 Node Name
|
|
Floor 3 Work VAV Box Inlet Node Name; !- Outlet 41 Node Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
AHU-1 Return Air Path, !- Name
|
|
AHU-1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
AHU-1 Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ReturnPath,
|
|
AHU-2 Return Air Path, !- Name
|
|
AHU-2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name
|
|
AirLoopHVAC:ZoneMixer, !- Component 1 Object Type
|
|
AHU-2 Return Air Mixer; !- Component 1 Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
AHU-1 Return Air Mixer, !- Name
|
|
AHU-1 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
Floor 1 Anesthesia Return Air Node Name, !- Inlet 1 Node Name
|
|
Floor 1 Bio Haz Return Air Node Name, !- Inlet 2 Node Name
|
|
Floor 1 Cafe Return Air Node Name, !- Inlet 3 Node Name
|
|
Floor 1 Clean Return Air Node Name, !- Inlet 4 Node Name
|
|
Floor 1 Clean Work Return Air Node Name, !- Inlet 5 Node Name
|
|
Floor 1 Dictation Return Air Node Name, !- Inlet 6 Node Name
|
|
Floor 1 Dressing Room Return Air Node Name, !- Inlet 7 Node Name
|
|
Floor 1 Humid Return Air Node Name, !- Inlet 8 Node Name
|
|
Floor 1 IT Hall Return Air Node Name, !- Inlet 9 Node Name
|
|
Floor 1 IT Room Return Air Node Name, !- Inlet 10 Node Name
|
|
Floor 1 Lobby Return Air Node Name, !- Inlet 11 Node Name
|
|
Floor 1 Lobby Hall Return Air Node Name, !- Inlet 12 Node Name
|
|
Floor 1 Locker Room Return Air Node Name, !- Inlet 13 Node Name
|
|
Floor 1 Locker Room Hall Return Air Node Name, !- Inlet 14 Node Name
|
|
Floor 1 Lounge Return Air Node Name, !- Inlet 15 Node Name
|
|
Floor 1 Med Gas Return Air Node Name, !- Inlet 16 Node Name
|
|
Floor 1 MRI Control Room Return Air Node Name, !- Inlet 17 Node Name
|
|
Floor 1 MRI Hall Return Air Node Name, !- Inlet 18 Node Name
|
|
Floor 1 MRI Room Return Air Node Name, !- Inlet 19 Node Name
|
|
Floor 1 Nourishment Return Air Node Name, !- Inlet 20 Node Name
|
|
Floor 1 Nurse Hall Return Air Node Name, !- Inlet 21 Node Name
|
|
Floor 1 Nurse Station Return Air Node Name, !- Inlet 22 Node Name
|
|
Floor 1 Office Return Air Node Name, !- Inlet 23 Node Name
|
|
Floor 1 Operating Room 1 Return Air Node Name, !- Inlet 24 Node Name
|
|
Floor 1 Operating Room 2 Return Air Node Name, !- Inlet 25 Node Name
|
|
Floor 1 Operating Room 3 Return Air Node Name, !- Inlet 26 Node Name
|
|
Floor 1 PACU Return Air Node Name, !- Inlet 27 Node Name
|
|
Floor 1 Pre-Op Hall Return Air Node Name, !- Inlet 28 Node Name
|
|
Floor 1 Pre-Op Room 1 Return Air Node Name, !- Inlet 29 Node Name
|
|
Floor 1 Pre-Op Room 2 Return Air Node Name, !- Inlet 30 Node Name
|
|
Floor 1 Procedure Room Return Air Node Name, !- Inlet 31 Node Name
|
|
Floor 1 Reception Return Air Node Name, !- Inlet 32 Node Name
|
|
Floor 1 Reception Hall Return Air Node Name, !- Inlet 33 Node Name
|
|
Floor 1 Recovery Room Return Air Node Name, !- Inlet 34 Node Name
|
|
Floor 1 Scheduling Return Air Node Name, !- Inlet 35 Node Name
|
|
Floor 1 Scrub Return Air Node Name, !- Inlet 36 Node Name
|
|
Floor 1 Soil Return Air Node Name, !- Inlet 37 Node Name
|
|
Floor 1 Soil Hold Return Air Node Name, !- Inlet 38 Node Name
|
|
Floor 1 Soil Work Return Air Node Name, !- Inlet 39 Node Name
|
|
Floor 1 Step Down Return Air Node Name, !- Inlet 40 Node Name
|
|
Floor 1 Sterile Hall Return Air Node Name, !- Inlet 41 Node Name
|
|
Floor 1 Sterile Storage Return Air Node Name, !- Inlet 42 Node Name
|
|
Floor 1 Sub-Sterile Return Air Node Name, !- Inlet 43 Node Name
|
|
Floor 1 Utility Hall Return Air Node Name, !- Inlet 44 Node Name
|
|
Floor 1 Vestibule Return Air Node Name; !- Inlet 45 Node Name
|
|
|
|
AirLoopHVAC:ZoneMixer,
|
|
AHU-2 Return Air Mixer, !- Name
|
|
AHU-2 Zone Equipment Outlet Node, !- Outlet Node Name
|
|
Floor 2 Conference Return Air Node Name, !- Inlet 1 Node Name
|
|
Floor 2 Dictation Return Air Node Name, !- Inlet 2 Node Name
|
|
Floor 2 Exam 1 Return Air Node Name, !- Inlet 3 Node Name
|
|
Floor 2 Exam 2 Return Air Node Name, !- Inlet 4 Node Name
|
|
Floor 2 Exam 3 Return Air Node Name, !- Inlet 5 Node Name
|
|
Floor 2 Exam 4 Return Air Node Name, !- Inlet 6 Node Name
|
|
Floor 2 Exam 5 Return Air Node Name, !- Inlet 7 Node Name
|
|
Floor 2 Exam 6 Return Air Node Name, !- Inlet 8 Node Name
|
|
Floor 2 Exam 7 Return Air Node Name, !- Inlet 9 Node Name
|
|
Floor 2 Exam 8 Return Air Node Name, !- Inlet 10 Node Name
|
|
Floor 2 Exam 9 Return Air Node Name, !- Inlet 11 Node Name
|
|
Floor 2 Exam Hall 1 Return Air Node Name, !- Inlet 12 Node Name
|
|
Floor 2 Exam Hall 2 Return Air Node Name, !- Inlet 13 Node Name
|
|
Floor 2 Exam Hall 3 Return Air Node Name, !- Inlet 14 Node Name
|
|
Floor 2 Exam Hall 4 Return Air Node Name, !- Inlet 15 Node Name
|
|
Floor 2 Exam Hall 5 Return Air Node Name, !- Inlet 16 Node Name
|
|
Floor 2 Exam Hall 6 Return Air Node Name, !- Inlet 17 Node Name
|
|
Floor 2 Lounge Return Air Node Name, !- Inlet 18 Node Name
|
|
Floor 2 Nurse Station 1 Return Air Node Name, !- Inlet 19 Node Name
|
|
Floor 2 Nurse Station 2 Return Air Node Name, !- Inlet 20 Node Name
|
|
Floor 2 Office Return Air Node Name, !- Inlet 21 Node Name
|
|
Floor 2 Office Hall Return Air Node Name, !- Inlet 22 Node Name
|
|
Floor 2 Reception Return Air Node Name, !- Inlet 23 Node Name
|
|
Floor 2 Reception Hall Return Air Node Name, !- Inlet 24 Node Name
|
|
Floor 2 Scheduling 1 Return Air Node Name, !- Inlet 25 Node Name
|
|
Floor 2 Scheduling 2 Return Air Node Name, !- Inlet 26 Node Name
|
|
Floor 2 Work Return Air Node Name, !- Inlet 27 Node Name
|
|
Floor 2 Work Hall Return Air Node Name, !- Inlet 28 Node Name
|
|
Floor 2 X-Ray Return Air Node Name, !- Inlet 29 Node Name
|
|
Floor 3 Dressing Room Return Air Node Name, !- Inlet 30 Node Name
|
|
Floor 3 Elevator Hall Return Air Node Name, !- Inlet 31 Node Name
|
|
Floor 3 Humid Return Air Node Name, !- Inlet 32 Node Name
|
|
Floor 3 Locker Return Air Node Name, !- Inlet 33 Node Name
|
|
Floor 3 Lounge Return Air Node Name, !- Inlet 34 Node Name
|
|
Floor 3 Mechanical Hall Return Air Node Name, !- Inlet 35 Node Name
|
|
Floor 3 Office Return Air Node Name, !- Inlet 36 Node Name
|
|
Floor 3 Office Hall Return Air Node Name, !- Inlet 37 Node Name
|
|
Floor 3 Physical Therapy 1 Return Air Node Name, !- Inlet 38 Node Name
|
|
Floor 3 Physical Therapy 2 Return Air Node Name, !- Inlet 39 Node Name
|
|
Floor 3 Treatment Return Air Node Name, !- Inlet 40 Node Name
|
|
Floor 3 Work Return Air Node Name; !- Inlet 41 Node Name
|
|
|
|
! ***SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
OR_CLGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 06:00,22.2, !- Field 3
|
|
Until: 17:00,18.3, !- Field 5
|
|
Until: 24:00,22.2; !- Field 7
|
|
|
|
Schedule:Compact,
|
|
OR_HTGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: ALLDays, !- Field 2
|
|
Until: 24:00,18.3; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CLGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 05:00,25.0, !- Field 3
|
|
Until: 18:00,22.2, !- Field 5
|
|
Until: 24:00,25.0, !- Field 7
|
|
For: Saturdays WinterDesignDay, !- Field 9
|
|
Until: 07:00,25.0, !- Field 10
|
|
Until: 15:00,22.2, !- Field 12
|
|
Until: 24:00,25.0, !- Field 14
|
|
For: AllOtherDays, !- Field 16
|
|
Until: 24:00,25.0; !- Field 17
|
|
|
|
Schedule:Compact,
|
|
HTGSETP_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 05:00,18.3, !- Field 3
|
|
Until: 18:00,21.1, !- Field 5
|
|
Until: 24:00,18.3, !- Field 7
|
|
For: Saturdays WinterDesignDay, !- Field 9
|
|
Until: 07:00,18.3, !- Field 10
|
|
Until: 15:00,21.1, !- Field 12
|
|
Until: 24:00,18.3, !- Field 14
|
|
For: AllOtherDays, !- Field 16
|
|
Until: 24:00,18.3; !- Field 17
|
|
|
|
Schedule:Compact,
|
|
Dual Zone Control Type Sched, !- Name
|
|
Control Type, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,4; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
MaxRelHumSetSch, !- Name
|
|
Humidity, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
MinRelHumSetSch, !- Name
|
|
Humidity, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,40; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
AHU-1_MinOAFracSchedule, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.33; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
AHU-1_Fan_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays Saturday, !- Field 2
|
|
Until: 04:00,0.00, !- Field 3
|
|
Until: 21:00,1.00, !- Field 5
|
|
Until: 24:00,0.00, !- Field 7
|
|
For: SummerDesignDay WinterDesignDay, !- Field 9
|
|
Until: 24:00,1.00, !- Field 10
|
|
For: AllOtherDays, !- Field 12
|
|
Until: 24:00,0.00; !- Field 13
|
|
|
|
Schedule:Compact,
|
|
AHU-2_Fan_Sch, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays Saturday, !- Field 2
|
|
Until: 06:00,0.00, !- Field 3
|
|
Until: 18:00,1.00, !- Field 5
|
|
Until: 24:00,0.00, !- Field 7
|
|
For: SummerDesignDay WinterDesignDay, !- Field 9
|
|
Until: 24:00,1.00, !- Field 10
|
|
For: AllOtherDays, !- Field 12
|
|
Until: 24:00,0.00; !- Field 13
|
|
|
|
Schedule:Compact,
|
|
VAV_SAT_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,12.8; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CAV_SAT_SCH, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,11.1; !- Field 3
|
|
|
|
! ***EQUIPMENT***
|
|
|
|
Output:PreprocessorMessage,
|
|
Conversion 7.2 => 8.0, !- Preprocessor Name
|
|
Warning, !- Error Severity
|
|
Boiler:HotWater="HeatSys1 Boiler", !- Message Line 1
|
|
defaults for this object have changed. Results may be different than previous. See, !- Message Line 2
|
|
InputOutputReference document for details.; !- Message Line 3
|
|
|
|
Boiler:HotWater,
|
|
HeatSys1 Boiler, !- Name
|
|
NATURALGAS, !- Fuel Type
|
|
AUTOSIZE, !- Nominal Capacity {W}
|
|
0.75, !- Nominal Thermal Efficiency
|
|
LeavingBoiler, !- Efficiency Curve Temperature Evaluation Variable
|
|
HeatSys1 Boiler Non-Condensing Boiler Curve, !- Normalized Boiler Efficiency Curve Name
|
|
AUTOSIZE, !- Design Water Flow Rate {m3/s}
|
|
0.0, !- Minimum Part Load Ratio
|
|
1.2, !- Maximum Part Load Ratio
|
|
1.0, !- Optimum Part Load Ratio
|
|
HeatSys1 Pump-HeatSys1 BoilerNode, !- Boiler Water Inlet Node Name
|
|
HeatSys1 Supply Equipment Outlet Node, !- Boiler Water Outlet Node Name
|
|
95.0, !- Water Outlet Upper Temperature Limit {C}
|
|
LeavingSetpointModulated,!- Boiler Flow Mode
|
|
0.0000, !- Parasitic Electric Load {W}
|
|
0.3000; !- Sizing Factor
|
|
|
|
SetpointManager:Scheduled,
|
|
HeatSys1 Boiler Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
HeatSys1 Loop Setpoint Sched, !- Schedule Name
|
|
HeatSys1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
Pump:ConstantSpeed,
|
|
HeatSys1 Pump, !- Name
|
|
HeatSys1 Supply Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector, !- Outlet Node Name
|
|
AUTOSIZE, !- Design Flow Rate {m3/s}
|
|
179352, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.9, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
Intermittent, !- Pump Control Type
|
|
; !- Pump Flow Rate Schedule Name
|
|
|
|
PlantEquipmentList,
|
|
HeatSys1 Equipment List, !- Name
|
|
Boiler:HotWater, !- Equipment 1 Object Type
|
|
HeatSys1 Boiler; !- Equipment 1 Name
|
|
|
|
! ***SIZING & CONTROLS***
|
|
|
|
Sizing:Plant,
|
|
HeatSys1, !- Plant or Condenser Loop Name
|
|
Heating, !- Loop Type
|
|
82.2000, !- Design Loop Exit Temperature {C}
|
|
11.1000; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
SetpointManager:Scheduled,
|
|
HeatSys1 Loop Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
HeatSys1 Loop Setpoint Sched, !- Schedule Name
|
|
HeatSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
PlantEquipmentOperationSchemes,
|
|
HeatSys1 Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type
|
|
HeatSys1 Operation Scheme, !- Control Scheme 1 Name
|
|
PlantOnSched; !- Control Scheme 1 Schedule Name
|
|
|
|
PlantEquipmentOperation:HeatingLoad,
|
|
HeatSys1 Operation Scheme, !- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
1000000000000000, !- Load Range 1 Upper Limit {W}
|
|
HeatSys1 Equipment List; !- Range 1 Equipment List Name
|
|
|
|
Curve:Cubic,
|
|
HeatSys1 Boiler Non-Condensing Boiler Curve, !- Name
|
|
0.626428326, !- Coefficient1 Constant
|
|
0.645643582, !- Coefficient2 x
|
|
-0.77720685, !- Coefficient3 x**2
|
|
0.313806701, !- Coefficient4 x**3
|
|
0.1, !- Minimum Value of x
|
|
1; !- Maximum Value of x
|
|
|
|
! ***LOOP***
|
|
|
|
PlantLoop,
|
|
HeatSys1, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
HeatSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
|
|
HeatSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
|
|
100.0, !- Maximum Loop Temperature {C}
|
|
10.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Plant Loop Volume {m3}
|
|
HeatSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
|
|
HeatSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
|
|
HeatSys1 Supply Branches,!- Plant Side Branch List Name
|
|
HeatSys1 Supply Connectors, !- Plant Side Connector List Name
|
|
HeatSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
HeatSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
HeatSys1 Demand Branches,!- Demand Side Branch List Name
|
|
HeatSys1 Demand Connectors, !- Demand Side Connector List Name
|
|
Optimal; !- Load Distribution Scheme
|
|
|
|
! ***CONNECTIONS***
|
|
|
|
BranchList,
|
|
HeatSys1 Demand Branches,!- Name
|
|
HeatSys1 Demand Inlet Branch, !- Branch 1 Name
|
|
HeatSys1 Demand Load Branch 1, !- Branch 2 Name
|
|
HeatSys1 Demand Load Branch 2, !- Branch 3 Name
|
|
HeatSys1 Demand Load Branch 3, !- Branch 4 Name
|
|
HeatSys1 Demand Load Branch 4, !- Branch 5 Name
|
|
HeatSys1 Demand Load Branch 5, !- Branch 6 Name
|
|
HeatSys1 Demand Load Branch 6, !- Branch 7 Name
|
|
HeatSys1 Demand Load Branch 7, !- Branch 8 Name
|
|
HeatSys1 Demand Load Branch 10, !- Branch 9 Name
|
|
HeatSys1 Demand Load Branch 11, !- Branch 10 Name
|
|
HeatSys1 Demand Load Branch 12, !- Branch 11 Name
|
|
HeatSys1 Demand Load Branch 13, !- Branch 12 Name
|
|
HeatSys1 Demand Load Branch 14, !- Branch 13 Name
|
|
HeatSys1 Demand Load Branch 16, !- Branch 14 Name
|
|
HeatSys1 Demand Load Branch 17, !- Branch 15 Name
|
|
HeatSys1 Demand Load Branch 18, !- Branch 16 Name
|
|
HeatSys1 Demand Load Branch 19, !- Branch 17 Name
|
|
HeatSys1 Demand Load Branch 20, !- Branch 18 Name
|
|
HeatSys1 Demand Load Branch 21, !- Branch 19 Name
|
|
HeatSys1 Demand Load Branch 22, !- Branch 20 Name
|
|
HeatSys1 Demand Load Branch 24, !- Branch 21 Name
|
|
HeatSys1 Demand Load Branch 25, !- Branch 22 Name
|
|
HeatSys1 Demand Load Branch 27, !- Branch 23 Name
|
|
HeatSys1 Demand Load Branch 29, !- Branch 24 Name
|
|
HeatSys1 Demand Load Branch 30, !- Branch 25 Name
|
|
HeatSys1 Demand Load Branch 31, !- Branch 26 Name
|
|
HeatSys1 Demand Load Branch 32, !- Branch 27 Name
|
|
HeatSys1 Demand Load Branch 33, !- Branch 28 Name
|
|
HeatSys1 Demand Load Branch 34, !- Branch 29 Name
|
|
HeatSys1 Demand Load Branch 35, !- Branch 30 Name
|
|
HeatSys1 Demand Load Branch 36, !- Branch 31 Name
|
|
HeatSys1 Demand Load Branch 38, !- Branch 32 Name
|
|
HeatSys1 Demand Load Branch 39, !- Branch 33 Name
|
|
HeatSys1 Demand Load Branch 40, !- Branch 34 Name
|
|
HeatSys1 Demand Load Branch 41, !- Branch 35 Name
|
|
HeatSys1 Demand Load Branch 42, !- Branch 36 Name
|
|
HeatSys1 Demand Load Branch 43, !- Branch 37 Name
|
|
HeatSys1 Demand Load Branch 44, !- Branch 38 Name
|
|
HeatSys1 Demand Load Branch 45, !- Branch 39 Name
|
|
HeatSys1 Demand Load Branch 46, !- Branch 40 Name
|
|
HeatSys1 Demand Load Branch 47, !- Branch 41 Name
|
|
HeatSys1 Demand Load Branch 48, !- Branch 42 Name
|
|
HeatSys1 Demand Load Branch 49, !- Branch 43 Name
|
|
HeatSys1 Demand Load Branch 51, !- Branch 44 Name
|
|
HeatSys1 Demand Load Branch 52, !- Branch 45 Name
|
|
HeatSys1 Demand Load Branch 55, !- Branch 46 Name
|
|
HeatSys1 Demand Load Branch 56, !- Branch 47 Name
|
|
HeatSys1 Demand Load Branch 57, !- Branch 48 Name
|
|
HeatSys1 Demand Bypass Branch, !- Branch 49 Name
|
|
HeatSys1 Demand Outlet Branch; !- Branch 50 Name
|
|
|
|
BranchList,
|
|
HeatSys1 Supply Branches,!- Name
|
|
HeatSys1 Supply Inlet Branch, !- Branch 1 Name
|
|
HeatSys1 Supply Equipment Branch, !- Branch 2 Name
|
|
HeatSys1 Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
HeatSys1 Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Demand Bypass Pipe, !- Component 1 Name
|
|
HeatSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Demand Inlet Pipe, !- Component 1 Name
|
|
HeatSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Anesthesia VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Anesthesia VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Anesthesia VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 10, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Humid VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Humid VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Humid VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 11, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 IT Hall VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 IT Hall VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 IT Hall VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 12, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 IT Room VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 IT Room VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 IT Room VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 13, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Lobby VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Lobby VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Lobby VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 14, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Lobby Hall VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Lobby Hall VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Lobby Hall VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 16, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Locker Room VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Locker Room VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Locker Room VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 17, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Locker Room Hall VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Locker Room Hall VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Locker Room Hall VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 18, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Lounge VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Lounge VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Lounge VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 19, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Med Gas VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Med Gas VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Med Gas VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Bio Haz VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Bio Haz VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Bio Haz VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 20, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 MRI Control Room VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 MRI Control Room VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 MRI Control Room VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 21, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 MRI Hall VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 MRI Hall VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 MRI Hall VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 22, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 MRI Room VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 MRI Room VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 MRI Room VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 24, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Nourishment VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Nourishment VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Nourishment VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 25, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Nurse Hall VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Nurse Hall VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Nurse Hall VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 27, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Nurse Station VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Nurse Station VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Nurse Station VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 29, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Office VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Office VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Office VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 3, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Cafe VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Cafe VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Cafe VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 30, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Operating Room 1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Operating Room 1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Operating Room 1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 31, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Operating Room 2 VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Operating Room 2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Operating Room 2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 32, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Operating Room 3 VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Operating Room 3 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Operating Room 3 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 33, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 PACU VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 PACU VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 PACU VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 34, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Pre-Op Hall VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Pre-Op Hall VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Pre-Op Hall VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 35, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Pre-Op Room 1 VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Pre-Op Room 1 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Pre-Op Room 1 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 36, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Pre-Op Room 2 VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Pre-Op Room 2 VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Pre-Op Room 2 VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 38, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Procedure Room VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Procedure Room VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Procedure Room VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 39, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Reception VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Reception VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Reception VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 4, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Clean VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Clean VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Clean VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 40, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Reception Hall VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Reception Hall VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Reception Hall VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 41, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Recovery Room VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Recovery Room VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Recovery Room VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 42, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Scheduling VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Scheduling VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Scheduling VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 43, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Scrub VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Scrub VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Scrub VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 44, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Soil VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Soil VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Soil VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 45, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Soil Hold VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Soil Hold VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Soil Hold VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 46, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Soil Work VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Soil Work VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Soil Work VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 47, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Step Down VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Step Down VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Step Down VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 48, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Sterile Hall VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Sterile Hall VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Sterile Hall VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 49, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Sterile Storage VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Sterile Storage VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Sterile Storage VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 5, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Clean Work VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Clean Work VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Clean Work VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 51, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Sub-Sterile VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Sub-Sterile VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Sub-Sterile VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 52, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Utility Hall VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Utility Hall VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Utility Hall VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 55, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Vestibule VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Vestibule VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Vestibule VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 56, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
AHU-1_HeatC, !- Component 1 Name
|
|
AHU-1_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
AHU-1_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 57, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
AHU-2_HeatC, !- Component 1 Name
|
|
AHU-2_HeatCDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
AHU-2_HeatCDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 6, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Dictation VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Dictation VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Dictation VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Load Branch 7, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Coil:Heating:Water, !- Component 1 Object Type
|
|
Floor 1 Dressing Room VAV Box Reheat Coil, !- Component 1 Name
|
|
Floor 1 Dressing Room VAV Box Reheat CoilDemand Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Dressing Room VAV Box Reheat CoilDemand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Demand Outlet Pipe, !- Component 1 Name
|
|
HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
HeatSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Boiler:HotWater, !- Component 1 Object Type
|
|
HeatSys1 Boiler, !- Component 1 Name
|
|
HeatSys1 Pump-HeatSys1 BoilerNode, !- Component 1 Inlet Node Name
|
|
HeatSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
HeatSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:ConstantSpeed, !- Component 1 Object Type
|
|
HeatSys1 Pump, !- Component 1 Name
|
|
HeatSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
HeatSys1 Pump-HeatSys1 BoilerNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
HeatSys1 Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
HeatSys1 Supply Outlet Pipe, !- Component 1 Name
|
|
HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
HeatSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
ConnectorList,
|
|
HeatSys1 Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
HeatSys1 Demand Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
HeatSys1 Demand Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
HeatSys1 Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
HeatSys1 Supply Splitter,!- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
HeatSys1 Supply Mixer; !- Connector 2 Name
|
|
|
|
Connector:Splitter,
|
|
HeatSys1 Demand Splitter,!- Name
|
|
HeatSys1 Demand Inlet Branch, !- Inlet Branch Name
|
|
HeatSys1 Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
HeatSys1 Demand Load Branch 2, !- Outlet Branch 2 Name
|
|
HeatSys1 Demand Load Branch 3, !- Outlet Branch 3 Name
|
|
HeatSys1 Demand Load Branch 4, !- Outlet Branch 4 Name
|
|
HeatSys1 Demand Load Branch 5, !- Outlet Branch 5 Name
|
|
HeatSys1 Demand Load Branch 6, !- Outlet Branch 6 Name
|
|
HeatSys1 Demand Load Branch 7, !- Outlet Branch 7 Name
|
|
HeatSys1 Demand Load Branch 10, !- Outlet Branch 8 Name
|
|
HeatSys1 Demand Load Branch 11, !- Outlet Branch 9 Name
|
|
HeatSys1 Demand Load Branch 12, !- Outlet Branch 10 Name
|
|
HeatSys1 Demand Load Branch 13, !- Outlet Branch 11 Name
|
|
HeatSys1 Demand Load Branch 14, !- Outlet Branch 12 Name
|
|
HeatSys1 Demand Load Branch 16, !- Outlet Branch 13 Name
|
|
HeatSys1 Demand Load Branch 17, !- Outlet Branch 14 Name
|
|
HeatSys1 Demand Load Branch 18, !- Outlet Branch 15 Name
|
|
HeatSys1 Demand Load Branch 19, !- Outlet Branch 16 Name
|
|
HeatSys1 Demand Load Branch 20, !- Outlet Branch 17 Name
|
|
HeatSys1 Demand Load Branch 21, !- Outlet Branch 18 Name
|
|
HeatSys1 Demand Load Branch 22, !- Outlet Branch 19 Name
|
|
HeatSys1 Demand Load Branch 24, !- Outlet Branch 20 Name
|
|
HeatSys1 Demand Load Branch 25, !- Outlet Branch 21 Name
|
|
HeatSys1 Demand Load Branch 27, !- Outlet Branch 22 Name
|
|
HeatSys1 Demand Load Branch 29, !- Outlet Branch 23 Name
|
|
HeatSys1 Demand Load Branch 30, !- Outlet Branch 24 Name
|
|
HeatSys1 Demand Load Branch 31, !- Outlet Branch 25 Name
|
|
HeatSys1 Demand Load Branch 32, !- Outlet Branch 26 Name
|
|
HeatSys1 Demand Load Branch 33, !- Outlet Branch 27 Name
|
|
HeatSys1 Demand Load Branch 34, !- Outlet Branch 28 Name
|
|
HeatSys1 Demand Load Branch 35, !- Outlet Branch 29 Name
|
|
HeatSys1 Demand Load Branch 36, !- Outlet Branch 30 Name
|
|
HeatSys1 Demand Load Branch 38, !- Outlet Branch 31 Name
|
|
HeatSys1 Demand Load Branch 39, !- Outlet Branch 32 Name
|
|
HeatSys1 Demand Load Branch 40, !- Outlet Branch 33 Name
|
|
HeatSys1 Demand Load Branch 41, !- Outlet Branch 34 Name
|
|
HeatSys1 Demand Load Branch 42, !- Outlet Branch 35 Name
|
|
HeatSys1 Demand Load Branch 43, !- Outlet Branch 36 Name
|
|
HeatSys1 Demand Load Branch 44, !- Outlet Branch 37 Name
|
|
HeatSys1 Demand Load Branch 45, !- Outlet Branch 38 Name
|
|
HeatSys1 Demand Load Branch 46, !- Outlet Branch 39 Name
|
|
HeatSys1 Demand Load Branch 47, !- Outlet Branch 40 Name
|
|
HeatSys1 Demand Load Branch 48, !- Outlet Branch 41 Name
|
|
HeatSys1 Demand Load Branch 49, !- Outlet Branch 42 Name
|
|
HeatSys1 Demand Load Branch 51, !- Outlet Branch 43 Name
|
|
HeatSys1 Demand Load Branch 52, !- Outlet Branch 44 Name
|
|
HeatSys1 Demand Load Branch 55, !- Outlet Branch 45 Name
|
|
HeatSys1 Demand Load Branch 56, !- Outlet Branch 46 Name
|
|
HeatSys1 Demand Load Branch 57, !- Outlet Branch 47 Name
|
|
HeatSys1 Demand Bypass Branch; !- Outlet Branch 48 Name
|
|
|
|
Connector:Splitter,
|
|
HeatSys1 Supply Splitter,!- Name
|
|
HeatSys1 Supply Inlet Branch, !- Inlet Branch Name
|
|
HeatSys1 Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
HeatSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
HeatSys1 Demand Mixer, !- Name
|
|
HeatSys1 Demand Outlet Branch, !- Outlet Branch Name
|
|
HeatSys1 Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
HeatSys1 Demand Load Branch 2, !- Inlet Branch 2 Name
|
|
HeatSys1 Demand Load Branch 3, !- Inlet Branch 3 Name
|
|
HeatSys1 Demand Load Branch 4, !- Inlet Branch 4 Name
|
|
HeatSys1 Demand Load Branch 5, !- Inlet Branch 5 Name
|
|
HeatSys1 Demand Load Branch 6, !- Inlet Branch 6 Name
|
|
HeatSys1 Demand Load Branch 7, !- Inlet Branch 7 Name
|
|
HeatSys1 Demand Load Branch 10, !- Inlet Branch 8 Name
|
|
HeatSys1 Demand Load Branch 11, !- Inlet Branch 9 Name
|
|
HeatSys1 Demand Load Branch 12, !- Inlet Branch 10 Name
|
|
HeatSys1 Demand Load Branch 13, !- Inlet Branch 11 Name
|
|
HeatSys1 Demand Load Branch 14, !- Inlet Branch 12 Name
|
|
HeatSys1 Demand Load Branch 16, !- Inlet Branch 13 Name
|
|
HeatSys1 Demand Load Branch 17, !- Inlet Branch 14 Name
|
|
HeatSys1 Demand Load Branch 18, !- Inlet Branch 15 Name
|
|
HeatSys1 Demand Load Branch 19, !- Inlet Branch 16 Name
|
|
HeatSys1 Demand Load Branch 20, !- Inlet Branch 17 Name
|
|
HeatSys1 Demand Load Branch 21, !- Inlet Branch 18 Name
|
|
HeatSys1 Demand Load Branch 22, !- Inlet Branch 19 Name
|
|
HeatSys1 Demand Load Branch 24, !- Inlet Branch 20 Name
|
|
HeatSys1 Demand Load Branch 25, !- Inlet Branch 21 Name
|
|
HeatSys1 Demand Load Branch 27, !- Inlet Branch 22 Name
|
|
HeatSys1 Demand Load Branch 29, !- Inlet Branch 23 Name
|
|
HeatSys1 Demand Load Branch 30, !- Inlet Branch 24 Name
|
|
HeatSys1 Demand Load Branch 31, !- Inlet Branch 25 Name
|
|
HeatSys1 Demand Load Branch 32, !- Inlet Branch 26 Name
|
|
HeatSys1 Demand Load Branch 33, !- Inlet Branch 27 Name
|
|
HeatSys1 Demand Load Branch 34, !- Inlet Branch 28 Name
|
|
HeatSys1 Demand Load Branch 35, !- Inlet Branch 29 Name
|
|
HeatSys1 Demand Load Branch 36, !- Inlet Branch 30 Name
|
|
HeatSys1 Demand Load Branch 38, !- Inlet Branch 31 Name
|
|
HeatSys1 Demand Load Branch 39, !- Inlet Branch 32 Name
|
|
HeatSys1 Demand Load Branch 40, !- Inlet Branch 33 Name
|
|
HeatSys1 Demand Load Branch 41, !- Inlet Branch 34 Name
|
|
HeatSys1 Demand Load Branch 42, !- Inlet Branch 35 Name
|
|
HeatSys1 Demand Load Branch 43, !- Inlet Branch 36 Name
|
|
HeatSys1 Demand Load Branch 44, !- Inlet Branch 37 Name
|
|
HeatSys1 Demand Load Branch 45, !- Inlet Branch 38 Name
|
|
HeatSys1 Demand Load Branch 46, !- Inlet Branch 39 Name
|
|
HeatSys1 Demand Load Branch 47, !- Inlet Branch 40 Name
|
|
HeatSys1 Demand Load Branch 48, !- Inlet Branch 41 Name
|
|
HeatSys1 Demand Load Branch 49, !- Inlet Branch 42 Name
|
|
HeatSys1 Demand Load Branch 51, !- Inlet Branch 43 Name
|
|
HeatSys1 Demand Load Branch 52, !- Inlet Branch 44 Name
|
|
HeatSys1 Demand Load Branch 55, !- Inlet Branch 45 Name
|
|
HeatSys1 Demand Load Branch 56, !- Inlet Branch 46 Name
|
|
HeatSys1 Demand Load Branch 57, !- Inlet Branch 47 Name
|
|
HeatSys1 Demand Bypass Branch; !- Inlet Branch 48 Name
|
|
|
|
Connector:Mixer,
|
|
HeatSys1 Supply Mixer, !- Name
|
|
HeatSys1 Supply Outlet Branch, !- Outlet Branch Name
|
|
HeatSys1 Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
HeatSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Demand Bypass Pipe, !- Name
|
|
HeatSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Demand Inlet Pipe, !- Name
|
|
HeatSys1 Demand Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Demand Inlet Pipe-HeatSys1 Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Demand Outlet Pipe, !- Name
|
|
HeatSys1 Demand Mixer-HeatSys1 Demand Outlet Pipe, !- Inlet Node Name
|
|
HeatSys1 Demand Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Supply Equipment Bypass Pipe, !- Name
|
|
HeatSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
HeatSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
HeatSys1 Supply Outlet Pipe, !- Name
|
|
HeatSys1 Supply Mixer-HeatSys1 Supply Outlet Pipe, !- Inlet Node Name
|
|
HeatSys1 Supply Outlet Node; !- Outlet Node Name
|
|
|
|
! ***SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
HW-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
PlantOnSched, !- Name
|
|
On/Off, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,1.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
CW-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,6.7; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
HeatSys1 Loop Setpoint Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,82.2; !- Field 3
|
|
|
|
! ***SWH EQUIPMENT***
|
|
|
|
Pump:VariableSpeed,
|
|
SWHSys1 Pump, !- Name
|
|
SWHSys1 Supply Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNodeviaConnector, !- Outlet Node Name
|
|
AUTOSIZE, !- Design Maximum Flow Rate {m3/s}
|
|
179352, !- Design Pump Head {Pa}
|
|
AUTOSIZE, !- Design Power Consumption {W}
|
|
0.9, !- Motor Efficiency
|
|
0.0, !- Fraction of Motor Inefficiencies to Fluid Stream
|
|
0, !- Coefficient 1 of the Part Load Performance Curve
|
|
1, !- Coefficient 2 of the Part Load Performance Curve
|
|
0, !- Coefficient 3 of the Part Load Performance Curve
|
|
0, !- Coefficient 4 of the Part Load Performance Curve
|
|
0.0, !- Design Minimum Flow Rate {m3/s}
|
|
Intermittent, !- Pump Control Type
|
|
; !- Pump Flow Rate Schedule Name
|
|
|
|
WaterHeater:Mixed,
|
|
SWHSys1 Water Heater, !- Name
|
|
3.0, !- Tank Volume {m3}
|
|
SWHSys1 Water Heater Setpoint Temperature Schedule Name, !- Setpoint Temperature Schedule Name
|
|
2.0, !- Deadband Temperature Difference {deltaC}
|
|
82.2222, !- Maximum Temperature Limit {C}
|
|
Cycle, !- Heater Control Type
|
|
845000, !- Heater Maximum Capacity {W}
|
|
, !- Heater Minimum Capacity {W}
|
|
, !- Heater Ignition Minimum Flow Rate {m3/s}
|
|
, !- Heater Ignition Delay {s}
|
|
NATURALGAS, !- Heater Fuel Type
|
|
0.8, !- Heater Thermal Efficiency
|
|
, !- Part Load Factor Curve Name
|
|
20, !- Off Cycle Parasitic Fuel Consumption Rate {W}
|
|
NATURALGAS, !- Off Cycle Parasitic Fuel Type
|
|
0.8, !- Off Cycle Parasitic Heat Fraction to Tank
|
|
, !- On Cycle Parasitic Fuel Consumption Rate {W}
|
|
NATURALGAS, !- On Cycle Parasitic Fuel Type
|
|
, !- On Cycle Parasitic Heat Fraction to Tank
|
|
SCHEDULE, !- Ambient Temperature Indicator
|
|
SWHSys1 Water Heater Ambient Temperature Schedule Name, !- Ambient Temperature Schedule Name
|
|
, !- Ambient Temperature Zone Name
|
|
, !- Ambient Temperature Outdoor Air Node Name
|
|
6.0, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- Off Cycle Loss Fraction to Zone
|
|
6.0, !- On Cycle Loss Coefficient to Ambient Temperature {W/K}
|
|
, !- On Cycle Loss Fraction to Zone
|
|
, !- Peak Use Flow Rate {m3/s}
|
|
, !- Use Flow Rate Fraction Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNode, !- Use Side Inlet Node Name
|
|
SWHSys1 Supply Equipment Outlet Node, !- Use Side Outlet Node Name
|
|
1.0, !- Use Side Effectiveness
|
|
, !- Source Side Inlet Node Name
|
|
, !- Source Side Outlet Node Name
|
|
1.0, !- Source Side Effectiveness
|
|
AUTOSIZE, !- Use Side Design Flow Rate {m3/s}
|
|
AUTOSIZE, !- Source Side Design Flow Rate {m3/s}
|
|
1.5; !- Indirect Water Heating Recovery Time {hr}
|
|
|
|
WaterUse:Equipment,
|
|
Floor 1 Anesthesia Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.055556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 1 Anesthesia, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 1 MRI Control Room Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.055556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 1 MRI Control Room,!- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 1 MRI Room Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.055556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 1 MRI Room, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 1 Operating Room 1 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
6.305556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 1 Operating Room 1,!- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 1 Operating Room 2 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
6.305556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 1 Operating Room 2,!- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 1 Operating Room 3 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
6.305556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 1 Operating Room 3,!- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 1 PACU Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.055556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 1 PACU, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 1 Pre-Op Room 1 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.055556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 1 Pre-Op Room 1, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 1 Pre-Op Room 2 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.055556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 1 Pre-Op Room 2, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 1 Procedure Room Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.055556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 1 Procedure Room, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 1 Recovery Room Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.055556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 1 Recovery Room, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 1 Step Down Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.055556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 1 Step Down, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 2 X-Ray Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.055556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 2 X-Ray, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 3 Physical Therapy 1 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.055556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 3 Physical Therapy 1, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
WaterUse:Equipment,
|
|
Floor 3 Physical Therapy 2 Water Equipment, !- Name
|
|
, !- End-Use Subcategory
|
|
1.055556e-006, !- Peak Flow Rate {m3/s}
|
|
BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name
|
|
Water Equipment Temp Sched, !- Target Temperature Schedule Name
|
|
Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
Floor 3 Physical Therapy 2, !- Zone Name
|
|
Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name
|
|
Water Equipment Latent fract sched; !- Latent Fraction Schedule Name
|
|
|
|
PlantEquipmentList,
|
|
SWHSys1 Equipment List, !- Name
|
|
WaterHeater:Mixed, !- Equipment 1 Object Type
|
|
SWHSys1 Water Heater; !- Equipment 1 Name
|
|
|
|
! ***SWH SIZING & CONTROLS***
|
|
|
|
Sizing:Plant,
|
|
SWHSys1, !- Plant or Condenser Loop Name
|
|
Heating, !- Loop Type
|
|
60, !- Design Loop Exit Temperature {C}
|
|
5.0; !- Loop Design Temperature Difference {deltaC}
|
|
|
|
SetpointManager:Scheduled,
|
|
SWHSys1 Loop Setpoint Manager, !- Name
|
|
Temperature, !- Control Variable
|
|
SWHSys1-Loop-Temp-Schedule, !- Schedule Name
|
|
SWHSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name
|
|
|
|
PlantEquipmentOperationSchemes,
|
|
SWHSys1 Loop Operation Scheme List, !- Name
|
|
PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type
|
|
SWHSys1 Operation Scheme,!- Control Scheme 1 Name
|
|
PlantOnSched; !- Control Scheme 1 Schedule Name
|
|
|
|
PlantEquipmentOperation:HeatingLoad,
|
|
SWHSys1 Operation Scheme,!- Name
|
|
0.0, !- Load Range 1 Lower Limit {W}
|
|
1000000000000000, !- Load Range 1 Upper Limit {W}
|
|
SWHSys1 Equipment List; !- Range 1 Equipment List Name
|
|
|
|
! ***SWH LOOP***
|
|
|
|
PlantLoop,
|
|
SWHSys1, !- Name
|
|
Water, !- Fluid Type
|
|
, !- User Defined Fluid Type
|
|
SWHSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name
|
|
SWHSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name
|
|
60.0, !- Maximum Loop Temperature {C}
|
|
10.0, !- Minimum Loop Temperature {C}
|
|
AUTOSIZE, !- Maximum Loop Flow Rate {m3/s}
|
|
0.0, !- Minimum Loop Flow Rate {m3/s}
|
|
AUTOSIZE, !- Plant Loop Volume {m3}
|
|
SWHSys1 Supply Inlet Node, !- Plant Side Inlet Node Name
|
|
SWHSys1 Supply Outlet Node, !- Plant Side Outlet Node Name
|
|
SWHSys1 Supply Branches, !- Plant Side Branch List Name
|
|
SWHSys1 Supply Connectors, !- Plant Side Connector List Name
|
|
SWHSys1 Demand Inlet Node, !- Demand Side Inlet Node Name
|
|
SWHSys1 Demand Outlet Node, !- Demand Side Outlet Node Name
|
|
SWHSys1 Demand Branches, !- Demand Side Branch List Name
|
|
SWHSys1 Demand Connectors, !- Demand Side Connector List Name
|
|
Optimal; !- Load Distribution Scheme
|
|
|
|
! ***SWH CONNECTIONS***
|
|
|
|
BranchList,
|
|
SWHSys1 Demand Branches, !- Name
|
|
SWHSys1 Demand Inlet Branch, !- Branch 1 Name
|
|
SWHSys1 Demand Load Branch 1, !- Branch 2 Name
|
|
SWHSys1 Demand Load Branch 2, !- Branch 3 Name
|
|
SWHSys1 Demand Load Branch 3, !- Branch 4 Name
|
|
SWHSys1 Demand Load Branch 4, !- Branch 5 Name
|
|
SWHSys1 Demand Load Branch 5, !- Branch 6 Name
|
|
SWHSys1 Demand Load Branch 6, !- Branch 7 Name
|
|
SWHSys1 Demand Load Branch 7, !- Branch 8 Name
|
|
SWHSys1 Demand Load Branch 8, !- Branch 9 Name
|
|
SWHSys1 Demand Load Branch 9, !- Branch 10 Name
|
|
SWHSys1 Demand Load Branch 10, !- Branch 11 Name
|
|
SWHSys1 Demand Load Branch 11, !- Branch 12 Name
|
|
SWHSys1 Demand Load Branch 12, !- Branch 13 Name
|
|
SWHSys1 Demand Load Branch 13, !- Branch 14 Name
|
|
SWHSys1 Demand Load Branch 14, !- Branch 15 Name
|
|
SWHSys1 Demand Load Branch 15, !- Branch 16 Name
|
|
SWHSys1 Demand Bypass Branch, !- Branch 17 Name
|
|
SWHSys1 Demand Outlet Branch; !- Branch 18 Name
|
|
|
|
BranchList,
|
|
SWHSys1 Supply Branches, !- Name
|
|
SWHSys1 Supply Inlet Branch, !- Branch 1 Name
|
|
SWHSys1 Supply Equipment Branch, !- Branch 2 Name
|
|
SWHSys1 Supply Equipment Bypass Branch, !- Branch 3 Name
|
|
SWHSys1 Supply Outlet Branch; !- Branch 4 Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Demand Bypass Pipe, !- Component 1 Name
|
|
SWHSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Demand Inlet Pipe, !- Component 1 Name
|
|
SWHSys1 Demand Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Demand Inlet Pipe-SWHSys1 Demand Mixer; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 1, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 1 Anesthesia Water Equipment, !- Component 1 Name
|
|
Floor 1 Anesthesia Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Anesthesia Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 10, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 1 Procedure Room Water Equipment, !- Component 1 Name
|
|
Floor 1 Procedure Room Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Procedure Room Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 11, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 1 Recovery Room Water Equipment, !- Component 1 Name
|
|
Floor 1 Recovery Room Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Recovery Room Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 12, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 1 Step Down Water Equipment, !- Component 1 Name
|
|
Floor 1 Step Down Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Step Down Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 13, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 2 X-Ray Water Equipment, !- Component 1 Name
|
|
Floor 2 X-Ray Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 2 X-Ray Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 14, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 3 Physical Therapy 1 Water Equipment, !- Component 1 Name
|
|
Floor 3 Physical Therapy 1 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 3 Physical Therapy 1 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 15, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 3 Physical Therapy 2 Water Equipment, !- Component 1 Name
|
|
Floor 3 Physical Therapy 2 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 3 Physical Therapy 2 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 2, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 1 MRI Control Room Water Equipment, !- Component 1 Name
|
|
Floor 1 MRI Control Room Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 MRI Control Room Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 3, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 1 MRI Room Water Equipment, !- Component 1 Name
|
|
Floor 1 MRI Room Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 MRI Room Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 4, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 1 Operating Room 1 Water Equipment, !- Component 1 Name
|
|
Floor 1 Operating Room 1 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Operating Room 1 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 5, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 1 Operating Room 2 Water Equipment, !- Component 1 Name
|
|
Floor 1 Operating Room 2 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Operating Room 2 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 6, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 1 Operating Room 3 Water Equipment, !- Component 1 Name
|
|
Floor 1 Operating Room 3 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Operating Room 3 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 7, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 1 PACU Water Equipment, !- Component 1 Name
|
|
Floor 1 PACU Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 PACU Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 8, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 1 Pre-Op Room 1 Water Equipment, !- Component 1 Name
|
|
Floor 1 Pre-Op Room 1 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Pre-Op Room 1 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Load Branch 9, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterUse:Connections, !- Component 1 Object Type
|
|
Floor 1 Pre-Op Room 2 Water Equipment, !- Component 1 Name
|
|
Floor 1 Pre-Op Room 2 Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name
|
|
Floor 1 Pre-Op Room 2 Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Demand Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Demand Outlet Pipe, !- Component 1 Name
|
|
SWHSys1 Demand Mixer-SWHSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name
|
|
SWHSys1 Demand Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Equipment Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
WaterHeater:Mixed, !- Component 1 Object Type
|
|
SWHSys1 Water Heater, !- Component 1 Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNode, !- Component 1 Inlet Node Name
|
|
SWHSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Equipment Bypass Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Supply Equipment Bypass Pipe, !- Component 1 Name
|
|
SWHSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Inlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pump:VariableSpeed, !- Component 1 Object Type
|
|
SWHSys1 Pump, !- Component 1 Name
|
|
SWHSys1 Supply Inlet Node, !- Component 1 Inlet Node Name
|
|
SWHSys1 Pump-SWHSys1 Water HeaterNodeviaConnector; !- Component 1 Outlet Node Name
|
|
|
|
Branch,
|
|
SWHSys1 Supply Outlet Branch, !- Name
|
|
, !- Pressure Drop Curve Name
|
|
Pipe:Adiabatic, !- Component 1 Object Type
|
|
SWHSys1 Supply Outlet Pipe, !- Component 1 Name
|
|
SWHSys1 Supply Mixer-SWHSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name
|
|
SWHSys1 Supply Outlet Node; !- Component 1 Outlet Node Name
|
|
|
|
ConnectorList,
|
|
SWHSys1 Demand Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
SWHSys1 Demand Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
SWHSys1 Demand Mixer; !- Connector 2 Name
|
|
|
|
ConnectorList,
|
|
SWHSys1 Supply Connectors, !- Name
|
|
Connector:Splitter, !- Connector 1 Object Type
|
|
SWHSys1 Supply Splitter, !- Connector 1 Name
|
|
Connector:Mixer, !- Connector 2 Object Type
|
|
SWHSys1 Supply Mixer; !- Connector 2 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 1 Anesthesia Water Equipment, !- Name
|
|
Floor 1 Anesthesia Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 1 Anesthesia Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 1 Anesthesia Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 1 MRI Control Room Water Equipment, !- Name
|
|
Floor 1 MRI Control Room Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 1 MRI Control Room Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 1 MRI Control Room Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 1 MRI Room Water Equipment, !- Name
|
|
Floor 1 MRI Room Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 1 MRI Room Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 1 MRI Room Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 1 Operating Room 1 Water Equipment, !- Name
|
|
Floor 1 Operating Room 1 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 1 Operating Room 1 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 1 Operating Room 1 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 1 Operating Room 2 Water Equipment, !- Name
|
|
Floor 1 Operating Room 2 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 1 Operating Room 2 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 1 Operating Room 2 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 1 Operating Room 3 Water Equipment, !- Name
|
|
Floor 1 Operating Room 3 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 1 Operating Room 3 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 1 Operating Room 3 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 1 PACU Water Equipment, !- Name
|
|
Floor 1 PACU Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 1 PACU Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 1 PACU Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 1 Pre-Op Room 1 Water Equipment, !- Name
|
|
Floor 1 Pre-Op Room 1 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 1 Pre-Op Room 1 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 1 Pre-Op Room 1 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 1 Pre-Op Room 2 Water Equipment, !- Name
|
|
Floor 1 Pre-Op Room 2 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 1 Pre-Op Room 2 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 1 Pre-Op Room 2 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 1 Procedure Room Water Equipment, !- Name
|
|
Floor 1 Procedure Room Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 1 Procedure Room Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 1 Procedure Room Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 1 Recovery Room Water Equipment, !- Name
|
|
Floor 1 Recovery Room Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 1 Recovery Room Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 1 Recovery Room Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 1 Step Down Water Equipment, !- Name
|
|
Floor 1 Step Down Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 1 Step Down Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 1 Step Down Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 2 X-Ray Water Equipment, !- Name
|
|
Floor 2 X-Ray Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 2 X-Ray Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 2 X-Ray Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 3 Physical Therapy 1 Water Equipment, !- Name
|
|
Floor 3 Physical Therapy 1 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 3 Physical Therapy 1 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 3 Physical Therapy 1 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
WaterUse:Connections,
|
|
Floor 3 Physical Therapy 2 Water Equipment, !- Name
|
|
Floor 3 Physical Therapy 2 Water Equipment Water Inlet Node, !- Inlet Node Name
|
|
Floor 3 Physical Therapy 2 Water Equipment Water Outlet Node, !- Outlet Node Name
|
|
, !- Supply Water Storage Tank Name
|
|
, !- Reclamation Water Storage Tank Name
|
|
, !- Hot Water Supply Temperature Schedule Name
|
|
, !- Cold Water Supply Temperature Schedule Name
|
|
, !- Drain Water Heat Exchanger Type
|
|
, !- Drain Water Heat Exchanger Destination
|
|
, !- Drain Water Heat Exchanger U-Factor Times Area {W/K}
|
|
Floor 3 Physical Therapy 2 Water Equipment; !- Water Use Equipment 1 Name
|
|
|
|
Connector:Splitter,
|
|
SWHSys1 Demand Splitter, !- Name
|
|
SWHSys1 Demand Inlet Branch, !- Inlet Branch Name
|
|
SWHSys1 Demand Load Branch 1, !- Outlet Branch 1 Name
|
|
SWHSys1 Demand Load Branch 2, !- Outlet Branch 2 Name
|
|
SWHSys1 Demand Load Branch 3, !- Outlet Branch 3 Name
|
|
SWHSys1 Demand Load Branch 4, !- Outlet Branch 4 Name
|
|
SWHSys1 Demand Load Branch 5, !- Outlet Branch 5 Name
|
|
SWHSys1 Demand Load Branch 6, !- Outlet Branch 6 Name
|
|
SWHSys1 Demand Load Branch 7, !- Outlet Branch 7 Name
|
|
SWHSys1 Demand Load Branch 8, !- Outlet Branch 8 Name
|
|
SWHSys1 Demand Load Branch 9, !- Outlet Branch 9 Name
|
|
SWHSys1 Demand Load Branch 10, !- Outlet Branch 10 Name
|
|
SWHSys1 Demand Load Branch 11, !- Outlet Branch 11 Name
|
|
SWHSys1 Demand Load Branch 12, !- Outlet Branch 12 Name
|
|
SWHSys1 Demand Load Branch 13, !- Outlet Branch 13 Name
|
|
SWHSys1 Demand Load Branch 14, !- Outlet Branch 14 Name
|
|
SWHSys1 Demand Load Branch 15, !- Outlet Branch 15 Name
|
|
SWHSys1 Demand Bypass Branch; !- Outlet Branch 16 Name
|
|
|
|
Connector:Splitter,
|
|
SWHSys1 Supply Splitter, !- Name
|
|
SWHSys1 Supply Inlet Branch, !- Inlet Branch Name
|
|
SWHSys1 Supply Equipment Branch, !- Outlet Branch 1 Name
|
|
SWHSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name
|
|
|
|
Connector:Mixer,
|
|
SWHSys1 Demand Mixer, !- Name
|
|
SWHSys1 Demand Outlet Branch, !- Outlet Branch Name
|
|
SWHSys1 Demand Load Branch 1, !- Inlet Branch 1 Name
|
|
SWHSys1 Demand Load Branch 2, !- Inlet Branch 2 Name
|
|
SWHSys1 Demand Load Branch 3, !- Inlet Branch 3 Name
|
|
SWHSys1 Demand Load Branch 4, !- Inlet Branch 4 Name
|
|
SWHSys1 Demand Load Branch 5, !- Inlet Branch 5 Name
|
|
SWHSys1 Demand Load Branch 6, !- Inlet Branch 6 Name
|
|
SWHSys1 Demand Load Branch 7, !- Inlet Branch 7 Name
|
|
SWHSys1 Demand Load Branch 8, !- Inlet Branch 8 Name
|
|
SWHSys1 Demand Load Branch 9, !- Inlet Branch 9 Name
|
|
SWHSys1 Demand Load Branch 10, !- Inlet Branch 10 Name
|
|
SWHSys1 Demand Load Branch 11, !- Inlet Branch 11 Name
|
|
SWHSys1 Demand Load Branch 12, !- Inlet Branch 12 Name
|
|
SWHSys1 Demand Load Branch 13, !- Inlet Branch 13 Name
|
|
SWHSys1 Demand Load Branch 14, !- Inlet Branch 14 Name
|
|
SWHSys1 Demand Load Branch 15, !- Inlet Branch 15 Name
|
|
SWHSys1 Demand Bypass Branch; !- Inlet Branch 16 Name
|
|
|
|
Connector:Mixer,
|
|
SWHSys1 Supply Mixer, !- Name
|
|
SWHSys1 Supply Outlet Branch, !- Outlet Branch Name
|
|
SWHSys1 Supply Equipment Branch, !- Inlet Branch 1 Name
|
|
SWHSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Demand Bypass Pipe, !- Name
|
|
SWHSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Demand Inlet Pipe, !- Name
|
|
SWHSys1 Demand Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Demand Inlet Pipe-SWHSys1 Demand Mixer; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Demand Outlet Pipe, !- Name
|
|
SWHSys1 Demand Mixer-SWHSys1 Demand Outlet Pipe, !- Inlet Node Name
|
|
SWHSys1 Demand Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Supply Equipment Bypass Pipe, !- Name
|
|
SWHSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name
|
|
SWHSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name
|
|
|
|
Pipe:Adiabatic,
|
|
SWHSys1 Supply Outlet Pipe, !- Name
|
|
SWHSys1 Supply Mixer-SWHSys1 Supply Outlet Pipe, !- Inlet Node Name
|
|
SWHSys1 Supply Outlet Node; !- Outlet Node Name
|
|
|
|
! ***SWH SCHEDULES***
|
|
|
|
Schedule:Compact,
|
|
BLDG_SWH_SCH, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: Weekdays SummerDesignDay, !- Field 2
|
|
Until: 07:00,0.01, !- Field 3
|
|
Until: 08:00,0.17, !- Field 5
|
|
Until: 09:00,0.58, !- Field 7
|
|
Until: 10:00,0.66, !- Field 9
|
|
Until: 11:00,0.78, !- Field 11
|
|
Until: 12:00,0.82, !- Field 13
|
|
Until: 13:00,0.71, !- Field 15
|
|
Until: 14:00,0.82, !- Field 17
|
|
Until: 15:00,0.78, !- Field 19
|
|
Until: 16:00,0.74, !- Field 21
|
|
Until: 17:00,0.63, !- Field 23
|
|
Until: 18:00,0.41, !- Field 25
|
|
Until: 21:00,0.18, !- Field 27
|
|
Until: 22:00,0.1, !- Field 29
|
|
Until: 24:00,0.01, !- Field 31
|
|
For: Saturday, !- Field 33
|
|
Until: 08:00,0.01, !- Field 34
|
|
Until: 09:00,0.2, !- Field 36
|
|
Until: 10:00,0.28, !- Field 38
|
|
Until: 12:00,0.3, !- Field 40
|
|
Until: 14:00,0.24, !- Field 42
|
|
Until: 17:00,0.23, !- Field 44
|
|
Until: 18:00,0.1, !- Field 46
|
|
Until: 24:00,0.01, !- Field 48
|
|
For: AllOtherDays, !- Field 50
|
|
Until: 24:00,0.01; !- Field 51
|
|
|
|
Schedule:Compact,
|
|
Water Equipment Latent fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.05; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Water Equipment Sensible fract sched, !- Name
|
|
Fraction, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,0.2; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Water Equipment Hot Supply Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,43.3; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
Water Equipment Temp Sched, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,43.3; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
SWHSys1 Water Heater Ambient Temperature Schedule Name, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,22.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
SWHSys1 Water Heater Setpoint Temperature Schedule Name, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
Schedule:Compact,
|
|
SWHSys1-Loop-Temp-Schedule, !- Name
|
|
Temperature, !- Schedule Type Limits Name
|
|
Through: 12/31, !- Field 1
|
|
For: AllDays, !- Field 2
|
|
Until: 24:00,60.0; !- Field 3
|
|
|
|
! ***ECONOMICS***
|
|
! IN_EIAMonthlyRateGas, Source EIA historical Nov2003 thru Oct2004
|
|
! Indiana 1999 state average electricity emissions factors based on eGRID, 1065, AirData
|
|
! PSI_CS_CommercialElectricService, source http://www.cinergypsi.com/pdfs/RateCS.pdf, effective 2004-05-24
|
|
! PSI_LLF_LowLoadFactorService,source http://www.cinergypsi.com/pdfs/RATELLF.pdf, effective 2004-05-24
|
|
|
|
UtilityCost:Tariff,
|
|
PSI_LLF_LowLoadFactorService, !- Name
|
|
Electricity:Facility, !- Output Meter Name
|
|
kWh, !- Conversion Factor Choice
|
|
, !- Energy Conversion Factor
|
|
, !- Demand Conversion Factor
|
|
, !- Time of Use Period Schedule Name
|
|
, !- Season Schedule Name
|
|
, !- Month Schedule Name
|
|
HalfHour, !- Demand Window Length
|
|
15.00, !- Monthly Charge or Variable Name
|
|
, !- Minimum Monthly Charge or Variable Name
|
|
, !- Real Time Pricing Charge Schedule Name
|
|
, !- Customer Baseline Load Schedule Name
|
|
Comm Elect; !- Group Name
|
|
|
|
UtilityCost:Charge:Block,
|
|
AnnualEnergyCharge, !- Utility Cost Charge Block Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
, !- Remaining Into Variable
|
|
, !- Block Size Multiplier Value or Variable Name
|
|
300, !- Block Size 1 Value or Variable Name
|
|
0.108222, !- Block 1 Cost per Unit Value or Variable Name
|
|
700, !- Block Size 2 Value or Variable Name
|
|
0.087021, !- Block 2 Cost per Unit Value or Variable Name
|
|
1500, !- Block Size 3 Value or Variable Name
|
|
0.078420, !- Block 3 Cost per Unit Value or Variable Name
|
|
remaining, !- Block Size 4 Value or Variable Name
|
|
0.058320; !- Block 4 Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Block,
|
|
AnnualDemandBaseCharge, !- Utility Cost Charge Block Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
, !- Remaining Into Variable
|
|
TotalDemand, !- Block Size Multiplier Value or Variable Name
|
|
190, !- Block Size 1 Value or Variable Name
|
|
0.0, !- Block 1 Cost per Unit Value or Variable Name
|
|
110, !- Block Size 2 Value or Variable Name
|
|
0.051773, !- Block 2 Cost per Unit Value or Variable Name
|
|
remaining, !- Block Size 3 Value or Variable Name
|
|
0.046965; !- Block 3 Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
FuelCostAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.002028; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
QualPollutionControlAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000536; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
SoxNoxRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.001127; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
DSMRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000370; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
PurchPowerTrackerAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000031; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
MidwestISOAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000216; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
CleanCoalRiderEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000833; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Qualify,
|
|
MinDemand75kw, !- Utility Cost Qualify Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
TotalDemand, !- Variable Name
|
|
Minimum, !- Qualify Type
|
|
75, !- Threshold Value or Variable Name
|
|
Annual, !- Season
|
|
Count, !- Threshold Test
|
|
12; !- Number of Months
|
|
|
|
UtilityCost:Charge:Simple,
|
|
TaxofeightPercent, !- Utility Cost Charge Simple Name
|
|
PSI_LLF_LowLoadFactorService, !- Tariff Name
|
|
SubTotal, !- Source Variable
|
|
Annual, !- Season
|
|
Taxes, !- Category Variable Name
|
|
0.08; !- Cost per Unit Value or Variable Name
|
|
|
|
!end PSI_LLF_LowLoadFactorService
|
|
|
|
UtilityCost:Tariff,
|
|
PSI_CS_CommercialElectricService, !- Name
|
|
Electricity:Facility, !- Output Meter Name
|
|
kWh, !- Conversion Factor Choice
|
|
, !- Energy Conversion Factor
|
|
, !- Demand Conversion Factor
|
|
, !- Time of Use Period Schedule Name
|
|
, !- Season Schedule Name
|
|
, !- Month Schedule Name
|
|
, !- Demand Window Length
|
|
9.40, !- Monthly Charge or Variable Name
|
|
, !- Minimum Monthly Charge or Variable Name
|
|
, !- Real Time Pricing Charge Schedule Name
|
|
, !- Customer Baseline Load Schedule Name
|
|
Comm Elect; !- Group Name
|
|
|
|
UtilityCost:Charge:Block,
|
|
AnnualEnergyCharge, !- Utility Cost Charge Block Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
, !- Remaining Into Variable
|
|
, !- Block Size Multiplier Value or Variable Name
|
|
300, !- Block Size 1 Value or Variable Name
|
|
0.082409, !- Block 1 Cost per Unit Value or Variable Name
|
|
700, !- Block Size 2 Value or Variable Name
|
|
0.072873, !- Block 2 Cost per Unit Value or Variable Name
|
|
1500, !- Block Size 3 Value or Variable Name
|
|
0.061696, !- Block 3 Cost per Unit Value or Variable Name
|
|
remaining, !- Block Size 4 Value or Variable Name
|
|
0.041179; !- Block 4 Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
FuelCostAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.002028; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
QualPollutionControlAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000536; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
SoxNoxRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.001127; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
DSMRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000021; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
PurchPowerTrackerAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000034; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
MidwestISOAdjustEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
-0.000203; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
CleanCoalRiderEnergyCharge, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
0.000807; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Qualify,
|
|
MaxDemand75kw, !- Utility Cost Qualify Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
TotalDemand, !- Variable Name
|
|
Maximum, !- Qualify Type
|
|
75, !- Threshold Value or Variable Name
|
|
Annual, !- Season
|
|
Count, !- Threshold Test
|
|
1; !- Number of Months
|
|
|
|
UtilityCost:Charge:Simple,
|
|
TaxofeightPercent, !- Utility Cost Charge Simple Name
|
|
PSI_CS_CommercialElectricService, !- Tariff Name
|
|
SubTotal, !- Source Variable
|
|
Annual, !- Season
|
|
Taxes, !- Category Variable Name
|
|
0.08; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Tariff,
|
|
IN_EIAMonthlyRateGas, !- Name
|
|
NaturalGas:Facility, !- Output Meter Name
|
|
MCF, !- Conversion Factor Choice
|
|
, !- Energy Conversion Factor
|
|
, !- Demand Conversion Factor
|
|
, !- Time of Use Period Schedule Name
|
|
, !- Season Schedule Name
|
|
, !- Month Schedule Name
|
|
, !- Demand Window Length
|
|
0.0, !- Monthly Charge or Variable Name
|
|
, !- Minimum Monthly Charge or Variable Name
|
|
, !- Real Time Pricing Charge Schedule Name
|
|
, !- Customer Baseline Load Schedule Name
|
|
Comm Gas; !- Group Name
|
|
|
|
UtilityCost:Charge:Simple,
|
|
MonthlyRateGasCharge, !- Utility Cost Charge Simple Name
|
|
IN_EIAMonthlyRateGas, !- Tariff Name
|
|
totalEnergy, !- Source Variable
|
|
Annual, !- Season
|
|
EnergyCharges, !- Category Variable Name
|
|
IN_MonthlyGasRates; !- Cost per Unit Value or Variable Name
|
|
|
|
UtilityCost:Variable,
|
|
IN_MonthlyGasRates, !- Name
|
|
IN_EIAMonthlyRateGas, !- Tariff Name
|
|
Currency, !- Variable Type
|
|
8.22, !- January Value
|
|
7.51, !- February Value
|
|
8.97, !- March Value
|
|
9.01, !- April Value
|
|
9.16, !- May Value
|
|
10.44, !- June Value
|
|
10.32, !- July Value
|
|
10.13, !- August Value
|
|
9.20, !- September Value
|
|
8.18, !- October Value
|
|
7.83, !- November Value
|
|
7.63; !- December Value
|
|
|
|
UtilityCost:Charge:Simple,
|
|
TaxofEightPercent, !- Utility Cost Charge Simple Name
|
|
IN_EIAMonthlyRateGas, !- Tariff Name
|
|
SubTotal, !- Source Variable
|
|
Annual, !- Season
|
|
Taxes, !- Category Variable Name
|
|
0.08; !- Cost per Unit Value or Variable Name
|
|
|
|
! ***GENERAL REPORTING***
|
|
|
|
OutputControl:ReportingTolerances,
|
|
0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC}
|
|
0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC}
|
|
|
|
Output:SQLite,
|
|
SimpleAndTabular; !- Option Type
|
|
|
|
EnvironmentalImpactFactors,
|
|
0.663, !- District Heating Efficiency
|
|
4.18, !- District Cooling COP {W/W}
|
|
0.585, !- Steam Conversion Efficiency
|
|
80.7272, !- Total Carbon Equivalent Emission Factor From N2O {kg/kg}
|
|
6.2727, !- Total Carbon Equivalent Emission Factor From CH4 {kg/kg}
|
|
0.2727; !- Total Carbon Equivalent Emission Factor From CO2 {kg/kg}
|
|
|
|
! Indiana electricity source and emission factors based on Deru and Torcellini 2007
|
|
|
|
FuelFactors,
|
|
Electricity, !- Existing Fuel Resource Name
|
|
kg, !- Units of Measure
|
|
, !- Energy per Unit Factor
|
|
3.546, !- Source Energy Factor {J/J}
|
|
, !- Source Energy Schedule Name
|
|
3.417E+02, !- CO2 Emission Factor {g/MJ}
|
|
, !- CO2 Emission Factor Schedule Name
|
|
1.186E-01, !- CO Emission Factor {g/MJ}
|
|
, !- CO Emission Factor Schedule Name
|
|
7.472E-01, !- CH4 Emission Factor {g/MJ}
|
|
, !- CH4 Emission Factor Schedule Name
|
|
6.222E-01, !- NOx Emission Factor {g/MJ}
|
|
, !- NOx Emission Factor Schedule Name
|
|
8.028E-03, !- N2O Emission Factor {g/MJ}
|
|
, !- N2O Emission Factor Schedule Name
|
|
1.872E+00, !- SO2 Emission Factor {g/MJ}
|
|
, !- SO2 Emission Factor Schedule Name
|
|
0.0, !- PM Emission Factor {g/MJ}
|
|
, !- PM Emission Factor Schedule Name
|
|
1.739E-02, !- PM10 Emission Factor {g/MJ}
|
|
, !- PM10 Emission Factor Schedule Name
|
|
0.0, !- PM2.5 Emission Factor {g/MJ}
|
|
, !- PM2.5 Emission Factor Schedule Name
|
|
0.0, !- NH3 Emission Factor {g/MJ}
|
|
, !- NH3 Emission Factor Schedule Name
|
|
1.019E-02, !- NMVOC Emission Factor {g/MJ}
|
|
, !- NMVOC Emission Factor Schedule Name
|
|
5.639E-06, !- Hg Emission Factor {g/MJ}
|
|
, !- Hg Emission Factor Schedule Name
|
|
2.778E-05, !- Pb Emission Factor {g/MJ}
|
|
, !- Pb Emission Factor Schedule Name
|
|
0.4309556, !- Water Emission Factor {L/MJ}
|
|
, !- Water Emission Factor Schedule Name
|
|
0, !- Nuclear High Level Emission Factor {g/MJ}
|
|
, !- Nuclear High Level Emission Factor Schedule Name
|
|
0; !- Nuclear Low Level Emission Factor {m3/MJ}
|
|
|
|
! Deru and Torcellini 2007
|
|
! Source Energy and Emission Factors for Energy Use in Buildings
|
|
! NREL/TP-550-38617
|
|
! source factor and Higher Heating Values from Table 5
|
|
! post-combustion emission factors for boiler from Table 9 (with factor of 1000 correction for natural gas)
|
|
|
|
FuelFactors,
|
|
NaturalGas, !- Existing Fuel Resource Name
|
|
m3, !- Units of Measure
|
|
37631000, !- Energy per Unit Factor
|
|
1.092, !- Source Energy Factor {J/J}
|
|
, !- Source Energy Schedule Name
|
|
5.21E+01, !- CO2 Emission Factor {g/MJ}
|
|
, !- CO2 Emission Factor Schedule Name
|
|
3.99E-02, !- CO Emission Factor {g/MJ}
|
|
, !- CO Emission Factor Schedule Name
|
|
1.06E-03, !- CH4 Emission Factor {g/MJ}
|
|
, !- CH4 Emission Factor Schedule Name
|
|
4.73E-02, !- NOx Emission Factor {g/MJ}
|
|
, !- NOx Emission Factor Schedule Name
|
|
1.06E-03, !- N2O Emission Factor {g/MJ}
|
|
, !- N2O Emission Factor Schedule Name
|
|
2.68E-04, !- SO2 Emission Factor {g/MJ}
|
|
, !- SO2 Emission Factor Schedule Name
|
|
0.0, !- PM Emission Factor {g/MJ}
|
|
, !- PM Emission Factor Schedule Name
|
|
3.59E-03, !- PM10 Emission Factor {g/MJ}
|
|
, !- PM10 Emission Factor Schedule Name
|
|
0.0, !- PM2.5 Emission Factor {g/MJ}
|
|
, !- PM2.5 Emission Factor Schedule Name
|
|
0, !- NH3 Emission Factor {g/MJ}
|
|
, !- NH3 Emission Factor Schedule Name
|
|
2.61E-03, !- NMVOC Emission Factor {g/MJ}
|
|
, !- NMVOC Emission Factor Schedule Name
|
|
1.11E-07, !- Hg Emission Factor {g/MJ}
|
|
, !- Hg Emission Factor Schedule Name
|
|
2.13E-07, !- Pb Emission Factor {g/MJ}
|
|
, !- Pb Emission Factor Schedule Name
|
|
0, !- Water Emission Factor {L/MJ}
|
|
, !- Water Emission Factor Schedule Name
|
|
0, !- Nuclear High Level Emission Factor {g/MJ}
|
|
, !- Nuclear High Level Emission Factor Schedule Name
|
|
0; !- Nuclear Low Level Emission Factor {m3/MJ}
|
|
|
|
OutputControl:Table:Style,
|
|
HTML; !- Column Separator
|
|
|
|
Output:Table:SummaryReports,
|
|
AllSummary; !- Report 1 Name
|
|
|
|
Output:Meter,Electricity:Facility,hourly;
|
|
|
|
Output:Meter,Heating:Electricity,hourly;
|
|
|
|
Output:Meter,Cooling:Electricity,hourly;
|
|
|
|
Output:Meter,InteriorLights:Electricity,hourly;
|
|
|
|
Output:Meter,ExteriorLights:Electricity,hourly;
|
|
|
|
Output:Meter,InteriorEquipment:Electricity,hourly;
|
|
|
|
Output:Meter,ExteriorEquipment:Electricity,hourly;
|
|
|
|
Output:Meter,Fans:Electricity,hourly;
|
|
|
|
Output:Meter,Pumps:Electricity,hourly;
|
|
|
|
Output:Meter,HeatRejection:Electricity,hourly;
|
|
|
|
Output:Meter,Humidifier:Electricity,hourly;
|
|
|
|
Output:Meter,Refrigeration:Electricity,hourly;
|
|
|
|
Output:Meter,WaterSystems:Electricity,hourly;
|
|
|
|
Output:Meter,NaturalGas:Facility,hourly;
|
|
|
|
Output:Meter,Heating:NaturalGas,hourly;
|
|
|
|
Output:Meter,InteriorEquipment:NaturalGas,hourly;
|
|
|
|
Output:Meter,WaterSystems:NaturalGas,hourly;
|
|
|