! DOE Commercial Reference Building ! Medium office, new construction 90.1-2004 ! Version 1.3_5.0 ! EnergyPlus Version 5.0 ! ASHRAE Standards 90.1-2004 and 62-1999 ! ! Description: Three story, 15 zone office building. ! Form: Area = 4,982 m2 (53,628 ft2); Number of Stories = 3; Shape = rectangle, Aspect ratio = 1.5 ! Envelope: Envelope thermal properties vary with climate according to ASHRAE Standard 90.1-2004. ! Opaque constructions: steel frame walls; built-up flat roof (insulation above deck); slab-on-grade floor ! Windows: window-to-wall ratio = 33.0%, equal distribution of windows ! Infiltration in perimeter zones only ! = 0.4 cfm/ft2 above grade wall area at 0.3 in wc (75 Pa) adjusted to 0.016 in wc (4 Pa). ! 25% of full value when ventilation system on. ! ! HVAC: Packaged MZVAV with plenum zones, gas furnace, electric reheat ! Economizer per 90.1-2004 ! ! Int. gains: lights = 10.76 W/m2 (1.0 W/ft2) (building area method); ! elec. plug loads = 10.76 W/m2 (1.0 W/ft2) ! gas plug load = 0 W/m2 (0 W/ft2) ! people = 268 total; 5.38/100 m2 (5.0/1000 ft2) ! elevators = 2 @ 20 HP each, 91% motor efficiency ! ! Detached Shading: None ! Daylight: None ! Natural Ventilation: None ! Zonal Equipment: None ! Air Primary Loops: VAV with electric reheat ! Plant Loops: SHWSys1 ! System Equipment Autosize: Yes ! Purchased Cooling: None ! Purchased Heating: None ! Coils: Coil:Cooling:DX:TwoSpeed; Coil:Heating:Gas; Coil:Heating:Electric ! Pumps: Yes ! Boilers: None ! Chillers: None !***** NOTICE ***** !***** The Reference Buildings were prepared as an account of work sponsored by an ***** !***** agency of the United States government. Neither the United States ***** !***** government nor any agency thereof, nor any of their employees, makes ***** !***** any warranty, express or implied, or assumes any legal liability or ***** !***** responsibility for the accuracy, completeness, or usefulness of any ***** !***** information, apparatus, product, or process disclosed, or represents ***** !***** that its use would not infringe privately owned rights. Reference ***** !***** herein to any specific commercial product, process, or service by ***** !***** trade name, trademark, manufacturer, or otherwise does not necessarily ***** !***** constitute or imply its endorsement, recommendation, or favoring by ***** !***** the United States government or any agency thereof. The views and ***** !***** opinions of authors expressed herein do not necessarily state or ***** !***** reflect those of the United States government or any agency thereof. ***** !***** Access to and use of the Reference Buildings imposes the following obligations ***** !***** on the user. The user agrees to credit DOE, NREL, PNNL, and LBNL in ***** !***** any publication(s) that that result from the use of Reference Buildings. ***** !***** However, the names of DOE/NREL/PNNL/LBNL may not be used in any ***** !***** advertising or publicity that implies endorsement or promotion of any ***** !***** products, services or commercial entities. ***** ! Reference citation for the Commercial Reference Buildings: ! Deru, M.; Field, K.; Studer, D.; Benne, K.; Griffith, B.; Torcellini, P; ! Halverson, M.; Winiarski, D.; Liu, B.; Rosenberg, M.; Huang, J.; ! Yazdanian, M.; Crawley, D. (2010). ! U.S. Department of Energy Commercial Reference Building Models of the National Building Stock. ! Washington, DC: U.S. Department of Energy, Energy Efficiency and ! Renewable Energy, Office of Building Technologies. ! ***GENERAL SIMULATION PARAMETERS*** ! Number of Zones: 18 Version,9.6; SimulationControl, YES, !- Do Zone Sizing Calculation YES, !- Do System Sizing Calculation YES, !- Do Plant Sizing Calculation NO, !- Run Simulation for Sizing Periods YES, !- Run Simulation for Weather File Run Periods No, !- Do HVAC Sizing Simulation for Sizing Periods 1; !- Maximum Number of HVAC Sizing Simulation Passes Building, Ref Bldg Medium Office New2004_v1.3_5.0, !- Name 0.0000, !- North Axis {deg} City, !- Terrain 0.0400, !- Loads Convergence Tolerance Value {W} 0.2000, !- Temperature Convergence Tolerance Value {deltaC} FullInteriorAndExterior, !- Solar Distribution 25, !- Maximum Number of Warmup Days 6; !- Minimum Number of Warmup Days RunPeriod, RUNPERIOD 1, !- Name 1, !- Begin Month 1, !- Begin Day of Month , !- Begin Year 12, !- End Month 31, !- End Day of Month , !- End Year Sunday, !- Day of Week for Start Day No, !- Use Weather File Holidays and Special Days No, !- Use Weather File Daylight Saving Period No, !- Apply Weekend Holiday Rule Yes, !- Use Weather File Rain Indicators Yes, !- Use Weather File Snow Indicators ; !- Treat Weather as Actual ! ***HOLIDAYS & DAYLIGHT SAVINGS*** RunPeriodControl:DaylightSavingTime, 2nd Sunday in March, !- Start Date 1st Sunday in November; !- End Date RunPeriodControl:SpecialDays, New Years Day, !- Name January 1, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Veterans Day, !- Name November 11, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Christmas, !- Name December 25, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Independence Day, !- Name July 4, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, MLK Day, !- Name 3rd Monday in January, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Presidents Day, !- Name 3rd Monday in February, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Memorial Day, !- Name Last Monday in May, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Labor Day, !- Name 1st Monday in September, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Columbus Day, !- Name 2nd Monday in October, !- Start Date 1, !- Duration {days} Holiday; !- Special Day Type RunPeriodControl:SpecialDays, Thanksgiving, !- Name 4th Thursday in November,!- Start Date 1, !- Duration {days} Holiday; !- Special Day Type ! ***SCHEDULE TYPES*** ScheduleTypeLimits, Any Number; !- Name ScheduleTypeLimits, Fraction, !- Name 0.0, !- Lower Limit Value 1.0, !- Upper Limit Value CONTINUOUS; !- Numeric Type ScheduleTypeLimits, Temperature, !- Name -60, !- Lower Limit Value 200, !- Upper Limit Value CONTINUOUS; !- Numeric Type ScheduleTypeLimits, On/Off, !- Name 0, !- Lower Limit Value 1, !- Upper Limit Value DISCRETE; !- Numeric Type ScheduleTypeLimits, Control Type, !- Name 0, !- Lower Limit Value 4, !- Upper Limit Value DISCRETE; !- Numeric Type ScheduleTypeLimits, Humidity, !- Name 10, !- Lower Limit Value 90, !- Upper Limit Value CONTINUOUS; !- Numeric Type ScheduleTypeLimits, Number; !- Name ! ***ALWAYS ON SCHEDULE*** Schedule:Compact, ALWAYS_ON, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1; !- Field 3 ! ***MISC SIMULATION PARAMETERS*** SurfaceConvectionAlgorithm:Inside,TARP; SurfaceConvectionAlgorithm:Outside,DOE-2; HeatBalanceAlgorithm,ConductionTransferFunction,200.0000; ZoneAirHeatBalanceAlgorithm, AnalyticalSolution; !- Algorithm Sizing:Parameters, 1.33, !- Heating Sizing Factor 1.33, !- Cooling Sizing Factor 6; !- Timesteps in Averaging Window ConvergenceLimits, 2, !- Minimum System Timestep {minutes} 25; !- Maximum HVAC Iterations ShadowCalculation, PolygonClipping, !- Shading Calculation Method Periodic, !- Shading Calculation Update Frequency Method 7, !- Shading Calculation Update Frequency 15000; !- Maximum Figures in Shadow Overlap Calculations Timestep,6; ! WeatherFileName=USA_IL_Chicago-OHare_TMY2.epw Site:Location, USA IL-CHICAGO-OHARE, !- Name 41.77, !- Latitude {deg} -87.75, !- Longitude {deg} -6.00, !- Time Zone {hr} 190; !- Elevation {m} ! CHICAGO_IL_USA Annual Heating 99.6%, MaxDB=-20.6°C SizingPeriod:DesignDay, CHICAGO Ann Htg 99.6% Condns DB, !- Name 1, !- Month 21, !- Day of Month WinterDesignDay, !- Day Type -20.6, !- Maximum Dry-Bulb Temperature {C} 0.0, !- Daily Dry-Bulb Temperature Range {deltaC} , !- Dry-Bulb Temperature Range Modifier Type , !- Dry-Bulb Temperature Range Modifier Day Schedule Name Wetbulb, !- Humidity Condition Type -20.6, !- Wetbulb or DewPoint at Maximum Dry-Bulb {C} , !- Humidity Condition Day Schedule Name , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} , !- Enthalpy at Maximum Dry-Bulb {J/kg} , !- Daily Wet-Bulb Temperature Range {deltaC} 99063., !- Barometric Pressure {Pa} 4.9, !- Wind Speed {m/s} 270, !- Wind Direction {deg} No, !- Rain Indicator No, !- Snow Indicator No, !- Daylight Saving Time Indicator ASHRAEClearSky, !- Solar Model Indicator , !- Beam Solar Day Schedule Name , !- Diffuse Solar Day Schedule Name , !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless} , !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless} 0.00; !- Sky Clearness ! CHICAGO_IL_USA Annual Cooling (WB=>MDB) .4%, MDB=31.2°C WB=25.5°C SizingPeriod:DesignDay, CHICAGO Ann Clg .4% Condns WB=>MDB, !- Name 7, !- Month 21, !- Day of Month SummerDesignDay, !- Day Type 31.2, !- Maximum Dry-Bulb Temperature {C} 10.7, !- Daily Dry-Bulb Temperature Range {deltaC} , !- Dry-Bulb Temperature Range Modifier Type , !- Dry-Bulb Temperature Range Modifier Day Schedule Name Wetbulb, !- Humidity Condition Type 25.5, !- Wetbulb or DewPoint at Maximum Dry-Bulb {C} , !- Humidity Condition Day Schedule Name , !- Humidity Ratio at Maximum Dry-Bulb {kgWater/kgDryAir} , !- Enthalpy at Maximum Dry-Bulb {J/kg} , !- Daily Wet-Bulb Temperature Range {deltaC} 99063., !- Barometric Pressure {Pa} 5.3, !- Wind Speed {m/s} 230, !- Wind Direction {deg} No, !- Rain Indicator No, !- Snow Indicator No, !- Daylight Saving Time Indicator ASHRAEClearSky, !- Solar Model Indicator , !- Beam Solar Day Schedule Name , !- Diffuse Solar Day Schedule Name , !- ASHRAE Clear Sky Optical Depth for Beam Irradiance (taub) {dimensionless} , !- ASHRAE Clear Sky Optical Depth for Diffuse Irradiance (taud) {dimensionless} 1.00; !- Sky Clearness Site:WaterMainsTemperature, CORRELATION, !- Calculation Method , !- Temperature Schedule Name 9.69, !- Annual Average Outdoor Air Temperature {C} 28.10; !- Maximum Difference In Monthly Average Outdoor Air Temperatures {deltaC} Site:GroundTemperature:BuildingSurface,19.527,19.502,19.536,19.598,20.002,21.640,22.225,22.375,21.449,20.121,19.802,19.633; ! ***OPAQUE CONSTRUCTIONS AND MATERIALS*** ! Exterior Walls Construction, Steel Frame Non-res Ext Wall, !- Name Wood Siding, !- Outside Layer Steel Frame NonRes Wall Insulation, !- Layer 2 1/2IN Gypsum; !- Layer 3 Material, Steel Frame NonRes Wall Insulation, !- Name MediumRough, !- Roughness 0.0870564552646045, !- Thickness {m} 0.049, !- Conductivity {W/m-K} 265.0000, !- Density {kg/m3} 836.8000, !- Specific Heat {J/kg-K} 0.9000, !- Thermal Absorptance 0.7000, !- Solar Absorptance 0.7000; !- Visible Absorptance ! Roof Construction, IEAD Non-res Roof, !- Name Roof Membrane, !- Outside Layer IEAD NonRes Roof Insulation, !- Layer 2 Metal Decking; !- Layer 3 Material, IEAD NonRes Roof Insulation, !- Name MediumRough, !- Roughness 0.127338688569477, !- Thickness {m} 0.049, !- Conductivity {W/m-K} 265.0000, !- Density {kg/m3} 836.8000, !- Specific Heat {J/kg-K} 0.9000, !- Thermal Absorptance 0.7000, !- Solar Absorptance 0.7000; !- Visible Absorptance ! Slab on grade, unheated Construction, ext-slab, !- Name HW CONCRETE, !- Outside Layer CP02 CARPET PAD; !- Layer 2 ! Interior Walls Construction, int-walls, !- Name 1/2IN Gypsum, !- Outside Layer 1/2IN Gypsum; !- Layer 2 ! Interior Floors Construction, INT-FLOOR-TOPSIDE, !- Name MAT-CC05 4 HW CONCRETE, !- Outside Layer CP02 CARPET PAD; !- Layer 2 Construction, INT-FLOOR-UNDERSIDE, !- Name CP02 CARPET PAD, !- Outside Layer MAT-CC05 4 HW CONCRETE; !- Layer 2 ! ***WINDOW/DOOR CONSTRUCTIONS AND MATERIALS*** Construction, Window Non-res Fixed, !- Name NonRes Fixed Assembly Window; !- Outside Layer WindowMaterial:SimpleGlazingSystem, NonRes Fixed Assembly Window, !- Name 3.23646, !- U-Factor {W/m2-K} 0.39, !- Solar Heat Gain Coefficient ; !- Visible Transmittance ! ***COMMON CONSTRUCTIONS AND MATERIALS*** Construction, DropCeiling, !- Name Std AC02; !- Outside Layer Construction, AIR-WALL, !- Name MAT-AIR-WALL; !- Outside Layer Construction, InteriorFurnishings, !- Name Std Wood 6inch; !- Outside Layer Material, Std Wood 6inch, !- Name MediumSmooth, !- Roughness 0.15, !- Thickness {m} 0.12, !- Conductivity {W/m-K} 540.0000, !- Density {kg/m3} 1210, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.7000000, !- Solar Absorptance 0.7000000; !- Visible Absorptance Material, Wood Siding, !- Name MediumSmooth, !- Roughness 0.0100, !- Thickness {m} 0.1100, !- Conductivity {W/m-K} 544.6200, !- Density {kg/m3} 1210.0000, !- Specific Heat {J/kg-K} 0.9000, !- Thermal Absorptance 0.7800, !- Solar Absorptance 0.7800; !- Visible Absorptance Material, 1/2IN Gypsum, !- Name Smooth, !- Roughness 0.0127, !- Thickness {m} 0.1600, !- Conductivity {W/m-K} 784.9000, !- Density {kg/m3} 830.0000, !- Specific Heat {J/kg-K} 0.9000, !- Thermal Absorptance 0.9200, !- Solar Absorptance 0.9200; !- Visible Absorptance Material, 1IN Stucco, !- Name Smooth, !- Roughness 0.0253, !- Thickness {m} 0.6918, !- Conductivity {W/m-K} 1858.0000, !- Density {kg/m3} 837.0000, !- Specific Heat {J/kg-K} 0.9000, !- Thermal Absorptance 0.9200, !- Solar Absorptance 0.9200; !- Visible Absorptance Material, 8IN CONCRETE HW, !- Name Rough, !- Roughness 0.2032, !- Thickness {m} 1.3110, !- Conductivity {W/m-K} 2240.0000, !- Density {kg/m3} 836.8000, !- Specific Heat {J/kg-K} 0.9000, !- Thermal Absorptance 0.7000, !- Solar Absorptance 0.7000; !- Visible Absorptance Material, Metal Siding, !- Name Smooth, !- Roughness 0.0015, !- Thickness {m} 44.9600, !- Conductivity {W/m-K} 7688.8600, !- Density {kg/m3} 410.0000, !- Specific Heat {J/kg-K} 0.9000, !- Thermal Absorptance 0.2000, !- Solar Absorptance 0.2000; !- Visible Absorptance Material, HW CONCRETE, !- Name Rough, !- Roughness 0.1016, !- Thickness {m} 1.3110, !- Conductivity {W/m-K} 2240.0000, !- Density {kg/m3} 836.8000, !- Specific Heat {J/kg-K} 0.9000, !- Thermal Absorptance 0.7000, !- Solar Absorptance 0.7000; !- Visible Absorptance Material:NoMass, CP02 CARPET PAD, !- Name VeryRough, !- Roughness 0.2165, !- Thermal Resistance {m2-K/W} 0.9000, !- Thermal Absorptance 0.7000, !- Solar Absorptance 0.8000; !- Visible Absorptance Material, Roof Membrane, !- Name VeryRough, !- Roughness 0.0095, !- Thickness {m} 0.1600, !- Conductivity {W/m-K} 1121.2900, !- Density {kg/m3} 1460.0000, !- Specific Heat {J/kg-K} 0.9000, !- Thermal Absorptance 0.7000, !- Solar Absorptance 0.7000; !- Visible Absorptance Material, Metal Decking, !- Name MediumSmooth, !- Roughness 0.0015, !- Thickness {m} 45.0060, !- Conductivity {W/m-K} 7680.0000, !- Density {kg/m3} 418.4000, !- Specific Heat {J/kg-K} 0.9000, !- Thermal Absorptance 0.7000, !- Solar Absorptance 0.3000; !- Visible Absorptance Material, Metal Roofing, !- Name MediumSmooth, !- Roughness 0.0015, !- Thickness {m} 45.0060, !- Conductivity {W/m-K} 7680.0000, !- Density {kg/m3} 418.4000, !- Specific Heat {J/kg-K} 0.9000, !- Thermal Absorptance 0.7000, !- Solar Absorptance 0.3000; !- Visible Absorptance Material, MAT-CC05 4 HW CONCRETE, !- Name Rough, !- Roughness 0.1016, !- Thickness {m} 1.3110, !- Conductivity {W/m-K} 2240.0000, !- Density {kg/m3} 836.8000, !- Specific Heat {J/kg-K} 0.9000, !- Thermal Absorptance 0.7000, !- Solar Absorptance 0.7000; !- Visible Absorptance ! Acoustic tile for drop ceiling Material, Std AC02, !- Name MediumSmooth, !- Roughness 1.2700000E-02, !- Thickness {m} 5.7000000E-02, !- Conductivity {W/m-K} 288.0000, !- Density {kg/m3} 1339.000, !- Specific Heat {J/kg-K} 0.9000000, !- Thermal Absorptance 0.7000000, !- Solar Absorptance 0.2000000; !- Visible Absorptance Material:NoMass, MAT-AIR-WALL, !- Name Rough, !- Roughness 0.2079491, !- Thermal Resistance {m2-K/W} 0.9, !- Thermal Absorptance 0.7; !- Solar Absorptance ! ZONE LIST: ! Core_bottom ! Core_mid ! Core_top ! FirstFloor_Plenum ! MidFloor_Plenum ! Perimeter_bot_ZN_1 ! Perimeter_bot_ZN_2 ! Perimeter_bot_ZN_3 ! Perimeter_bot_ZN_4 ! Perimeter_mid_ZN_1 ! Perimeter_mid_ZN_2 ! Perimeter_mid_ZN_3 ! Perimeter_mid_ZN_4 ! Perimeter_top_ZN_1 ! Perimeter_top_ZN_2 ! Perimeter_top_ZN_3 ! Perimeter_top_ZN_4 ! TopFloor_Plenum ! ***ZONES*** Zone, Core_bottom, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Core_mid, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Core_top, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, FirstFloor_Plenum, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm No; !- Part of Total Floor Area Zone, MidFloor_Plenum, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm No; !- Part of Total Floor Area Zone, Perimeter_bot_ZN_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Perimeter_bot_ZN_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Perimeter_bot_ZN_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Perimeter_bot_ZN_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Perimeter_mid_ZN_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Perimeter_mid_ZN_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Perimeter_mid_ZN_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Perimeter_mid_ZN_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Perimeter_top_ZN_1, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Perimeter_top_ZN_2, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Perimeter_top_ZN_3, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, Perimeter_top_ZN_4, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm Yes; !- Part of Total Floor Area Zone, TopFloor_Plenum, !- Name 0.0000, !- Direction of Relative North {deg} 0.0000, !- X Origin {m} 0.0000, !- Y Origin {m} 0.0000, !- Z Origin {m} 1, !- Type 1, !- Multiplier , !- Ceiling Height {m} , !- Volume {m3} autocalculate, !- Floor Area {m2} , !- Zone Inside Convection Algorithm , !- Zone Outside Convection Algorithm No; !- Part of Total Floor Area ! ***WALLS*** BuildingSurface:Detailed, Building_Roof, !- Name Roof, !- Surface Type IEAD Non-res Roof, !- Construction Name TopFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,11.8872, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,11.8872, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,11.8872, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,11.8872; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_bot_ZN_5_Floor, !- Name Floor, !- Surface Type ext-slab, !- Construction Name Core_bottom, !- Zone Name , !- Space Name Ground, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_bot_ZN_5_Wall_East, !- Name Wall, !- Surface Type int-walls, !- Construction Name Core_bottom, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_2_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_bot_ZN_5_Wall_North,!- Name Wall, !- Surface Type int-walls, !- Construction Name Core_bottom, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_3_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_bot_ZN_5_Wall_South,!- Name Wall, !- Surface Type int-walls, !- Construction Name Core_bottom, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_1_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_bot_ZN_5_Wall_West, !- Name Wall, !- Surface Type int-walls, !- Construction Name Core_bottom, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_4_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_bottom_ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Core_bottom, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition FirstFloor_Plenum_Floor_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_mid_ZN_5_Floor, !- Name Floor, !- Surface Type INT-FLOOR-TOPSIDE, !- Construction Name Core_mid, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition FirstFloor_Plenum_Ceiling_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_mid_ZN_5_Wall_East, !- Name Wall, !- Surface Type int-walls, !- Construction Name Core_mid, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_2_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_mid_ZN_5_Wall_North,!- Name Wall, !- Surface Type int-walls, !- Construction Name Core_mid, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_3_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_mid_ZN_5_Wall_South,!- Name Wall, !- Surface Type int-walls, !- Construction Name Core_mid, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_1_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_mid_ZN_5_Wall_West, !- Name Wall, !- Surface Type int-walls, !- Construction Name Core_mid, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_4_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_mid_ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Core_mid, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition MidFloor_Plenum_Floor_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_top_ZN_5_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Core_top, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition TopFloor_Plenum_Floor_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,10.6680, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,10.6680, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,10.6680, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_top_ZN_5_Floor, !- Name Floor, !- Surface Type INT-FLOOR-TOPSIDE, !- Construction Name Core_top, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition MidFloor_Plenum_Ceiling_5, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_top_ZN_5_Wall_East, !- Name Wall, !- Surface Type int-walls, !- Construction Name Core_top, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_2_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,10.6680, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_top_ZN_5_Wall_North,!- Name Wall, !- Surface Type int-walls, !- Construction Name Core_top, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_3_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,10.6680, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_top_ZN_5_Wall_South,!- Name Wall, !- Surface Type int-walls, !- Construction Name Core_top, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_1_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,10.6680, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Core_top_ZN_5_Wall_West, !- Name Wall, !- Surface Type int-walls, !- Construction Name Core_top, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_4_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,10.6680, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, FirstFloor_Plenum_Ceiling_1, !- Name Ceiling, !- Surface Type INT-FLOOR-UNDERSIDE, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_1_Floor,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, FirstFloor_Plenum_Ceiling_2, !- Name Ceiling, !- Surface Type INT-FLOOR-UNDERSIDE, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_2_Floor,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, FirstFloor_Plenum_Ceiling_3, !- Name Ceiling, !- Surface Type INT-FLOOR-UNDERSIDE, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_3_Floor,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, FirstFloor_Plenum_Ceiling_4, !- Name Ceiling, !- Surface Type INT-FLOOR-UNDERSIDE, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_4_Floor,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, FirstFloor_Plenum_Ceiling_5, !- Name Ceiling, !- Surface Type INT-FLOOR-UNDERSIDE, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_mid_ZN_5_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, FirstFloor_Plenum_Floor_1, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,2.7432, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, FirstFloor_Plenum_Floor_2, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, FirstFloor_Plenum_Floor_3, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_3_Ceililng, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,2.7432, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, FirstFloor_Plenum_Floor_4, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, FirstFloor_Plenum_Floor_5, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_bottom_ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, MidFloor_Plenum_Ceiling_1, !- Name Ceiling, !- Surface Type INT-FLOOR-UNDERSIDE, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_1_Floor,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, MidFloor_Plenum_Ceiling_2, !- Name Ceiling, !- Surface Type INT-FLOOR-UNDERSIDE, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_2_Floor,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, MidFloor_Plenum_Ceiling_3, !- Name Ceiling, !- Surface Type INT-FLOOR-UNDERSIDE, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_3_Floor,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, MidFloor_Plenum_Ceiling_4, !- Name Ceiling, !- Surface Type INT-FLOOR-UNDERSIDE, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_4_Floor,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, MidFloor_Plenum_Ceiling_5, !- Name Ceiling, !- Surface Type INT-FLOOR-UNDERSIDE, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_top_ZN_5_Floor, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, MidFloor_Plenum_Floor_1, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, MidFloor_Plenum_Floor_2, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,6.7056, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, MidFloor_Plenum_Floor_3, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, MidFloor_Plenum_Floor_4, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, MidFloor_Plenum_Floor_5, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_mid_ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_Plenum_Wall_East, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,2.7432, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2738,2.7432, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_Plenum_Wall_North, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,2.7432, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_Plenum_Wall_South, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 2 {m} 49.9110,0.0000,2.7432, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_Plenum_Wall_West, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name FirstFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_1_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_bot_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition FirstFloor_Plenum_Floor_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_1_Floor,!- Name Floor, !- Surface Type ext-slab, !- Construction Name Perimeter_bot_ZN_1, !- Zone Name , !- Space Name Ground, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_1_Wall_East, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_bot_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_2_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_1_Wall_North, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_bot_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_bot_ZN_5_Wall_South,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_1_Wall_South, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name Perimeter_bot_ZN_1, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 49.9110,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_1_Wall_West, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_bot_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_4_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_2_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_bot_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition FirstFloor_Plenum_Floor_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 2 {m} 49.9110,0.0000,2.7432, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_2_Floor,!- Name Floor, !- Surface Type ext-slab, !- Construction Name Perimeter_bot_ZN_2, !- Zone Name , !- Space Name Ground, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,0.0000, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_2_Wall_East, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name Perimeter_bot_ZN_2, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2738,0.0000, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_2_Wall_North, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_bot_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_3_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_2_Wall_South, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_bot_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_1_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 49.9110,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_2_Wall_West, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_bot_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_bot_ZN_5_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_3_Ceililng, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_bot_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition FirstFloor_Plenum_Floor_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_3_Floor,!- Name Floor, !- Surface Type ext-slab, !- Construction Name Perimeter_bot_ZN_3, !- Zone Name , !- Space Name Ground, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,0.0000, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_3_Wall_East, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_bot_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_2_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2738,0.0000, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_3_Wall_North, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name Perimeter_bot_ZN_3, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_3_Wall_South, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_bot_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_bot_ZN_5_Wall_North,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_3_Wall_West, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_bot_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_4_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_4_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_bot_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition FirstFloor_Plenum_Floor_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_4_Floor,!- Name Floor, !- Surface Type ext-slab, !- Construction Name Perimeter_bot_ZN_4, !- Zone Name , !- Space Name Ground, !- Outside Boundary Condition , !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,0.0000; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_4_Wall_East, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_bot_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_bot_ZN_5_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_4_Wall_North, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_bot_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_3_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,2.7432, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_4_Wall_South, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_bot_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_bot_ZN_1_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,2.7432, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,0.0000, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_bot_ZN_4_Wall_West, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name Perimeter_bot_ZN_4, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,2.7432, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,0.0000, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,0.0000, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,2.7432; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_Plenum_Wall_East, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,6.7056, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2738,6.7056, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_Plenum_Wall_North, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,6.7056, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_Plenum_Wall_South, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 2 {m} 49.9110,0.0000,6.7056, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_Plenum_Wall_West, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name MidFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_1_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_mid_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition MidFloor_Plenum_Floor_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_1_Floor,!- Name Floor, !- Surface Type INT-FLOOR-TOPSIDE, !- Construction Name Perimeter_mid_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition FirstFloor_Plenum_Ceiling_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_1_Wall_East, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_mid_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_2_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_1_Wall_North, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_mid_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_mid_ZN_5_Wall_South,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_1_Wall_South, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name Perimeter_mid_ZN_1, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m} 49.9110,0.0000,3.9624, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_1_Wall_West, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_mid_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_4_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_2_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_mid_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition MidFloor_Plenum_Floor_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_2_Floor,!- Name Floor, !- Surface Type INT-FLOOR-TOPSIDE, !- Construction Name Perimeter_mid_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition FirstFloor_Plenum_Ceiling_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,3.9624, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_2_Wall_East, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name Perimeter_mid_ZN_2, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2738,3.9624, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_2_Wall_North, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_mid_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_3_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_2_Wall_South, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_mid_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_1_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 49.9110,0.0000,3.9624, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_2_Wall_West, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_mid_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_mid_ZN_5_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_3_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_mid_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition MidFloor_Plenum_Floor_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_3_Floor,!- Name Floor, !- Surface Type INT-FLOOR-TOPSIDE, !- Construction Name Perimeter_mid_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition FirstFloor_Plenum_Ceiling_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_3_Wall_East, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_mid_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_2_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2738,3.9624, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_3_Wall_North, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name Perimeter_mid_ZN_3, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_3_Wall_South, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_mid_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_mid_ZN_5_Wall_North,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_3_Wall_West, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_mid_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_4_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_4_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_mid_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition MidFloor_Plenum_Floor_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_4_Floor,!- Name Floor, !- Surface Type INT-FLOOR-TOPSIDE, !- Construction Name Perimeter_mid_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition FirstFloor_Plenum_Ceiling_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,3.9624; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_4_Wall_East, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_mid_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_mid_ZN_5_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_4_Wall_North, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_mid_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_3_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,6.7056, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,3.9624, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_4_Wall_South, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_mid_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_mid_ZN_1_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,6.7056, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,3.9624, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_mid_ZN_4_Wall_West, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name Perimeter_mid_ZN_4, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,6.7056, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,3.9624, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,3.9624, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,6.7056; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_Plenum_Wall_East, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name TopFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,11.8872, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,10.6680, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2738,10.6680, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,11.8872; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_Plenum_Wall_North, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name TopFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,11.8872, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,10.6680, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,10.6680, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,11.8872; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_Plenum_Wall_South, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name TopFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,11.8872, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,10.6680, !- X,Y,Z ==> Vertex 2 {m} 49.9110,0.0000,10.6680, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,11.8872; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_Plenum_Wall_West, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name TopFloor_Plenum, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,11.8872, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,10.6680, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,10.6680, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,11.8872; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_1_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_top_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition TopFloor_Plenum_Floor_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,10.6680, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,10.6680, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_1_Floor,!- Name Floor, !- Surface Type INT-FLOOR-TOPSIDE, !- Construction Name Perimeter_top_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition MidFloor_Plenum_Ceiling_1, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_1_Wall_East, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_top_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_2_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_1_Wall_North, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_top_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_top_ZN_5_Wall_South,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,10.6680, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_1_Wall_South, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name Perimeter_top_ZN_1, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 2 {m} 49.9110,0.0000,7.9248, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_1_Wall_West, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_top_ZN_1, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_4_Wall_South, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,10.6680, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_2_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_top_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition TopFloor_Plenum_Floor_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,10.6680, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,10.6680, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_2_Floor,!- Name Floor, !- Surface Type INT-FLOOR-TOPSIDE, !- Construction Name Perimeter_top_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition MidFloor_Plenum_Ceiling_2, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,7.9248, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_2_Wall_East, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name Perimeter_top_ZN_2, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,7.9248, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2738,7.9248, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_2_Wall_North, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_top_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_3_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,10.6680, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_2_Wall_South, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_top_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_1_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,4.5732,10.6680, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 49.9110,0.0000,7.9248, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_2_Wall_West, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_top_ZN_2, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_top_ZN_5_Wall_East, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,10.6680, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 45.3375,4.5732,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_3_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_top_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition TopFloor_Plenum_Floor_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,10.6680, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,10.6680, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,10.6680, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_3_Floor,!- Name Floor, !- Surface Type INT-FLOOR-TOPSIDE, !- Construction Name Perimeter_top_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition MidFloor_Plenum_Ceiling_3, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_3_Wall_East, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_top_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_2_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 45.3375,28.7006,10.6680, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2738,7.9248, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_3_Wall_North, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name Perimeter_top_ZN_3, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,33.2738,10.6680, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_3_Wall_South, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_top_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_top_ZN_5_Wall_North,!- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,10.6680, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 45.3375,28.7006,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_3_Wall_West, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_top_ZN_3, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_4_Wall_North, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,10.6680, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_4_Ceiling, !- Name Ceiling, !- Surface Type DropCeiling, !- Construction Name Perimeter_top_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition TopFloor_Plenum_Floor_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,10.6680, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,10.6680, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,10.6680, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_4_Floor,!- Name Floor, !- Surface Type INT-FLOOR-TOPSIDE, !- Construction Name Perimeter_top_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition MidFloor_Plenum_Ceiling_4, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,7.9248; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_4_Wall_East, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_top_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_top_ZN_5_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,4.5732,10.6680, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_4_Wall_North, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_top_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_3_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,10.6680, !- X,Y,Z ==> Vertex 1 {m} 4.5732,28.7006,7.9248, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_4_Wall_South, !- Name Wall, !- Surface Type int-walls, !- Construction Name Perimeter_top_ZN_4, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_1_Wall_West, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 2 {m} 4.5732,4.5732,7.9248, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, Perimeter_top_ZN_4_Wall_West, !- Name Wall, !- Surface Type Steel Frame Non-res Ext Wall, !- Construction Name Perimeter_top_ZN_4, !- Zone Name , !- Space Name Outdoors, !- Outside Boundary Condition , !- Outside Boundary Condition Object SunExposed, !- Sun Exposure WindExposed, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,10.6680, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,7.9248, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,7.9248, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, TopFloor_Plenum_Floor_1, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name TopFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_1_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m} 4.5732,4.5732,10.6680, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,10.6680, !- X,Y,Z ==> Vertex 3 {m} 49.9110,0.0000,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, TopFloor_Plenum_Floor_2, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name TopFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_2_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 49.9110,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m} 45.3375,4.5732,10.6680, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,10.6680, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2738,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, TopFloor_Plenum_Floor_3, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name TopFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_3_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,33.2738,10.6680, !- X,Y,Z ==> Vertex 1 {m} 49.9110,33.2738,10.6680, !- X,Y,Z ==> Vertex 2 {m} 45.3375,28.7006,10.6680, !- X,Y,Z ==> Vertex 3 {m} 4.5732,28.7006,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, TopFloor_Plenum_Floor_4, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name TopFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Perimeter_top_ZN_4_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 0.0000,0.0000,10.6680, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2738,10.6680, !- X,Y,Z ==> Vertex 2 {m} 4.5732,28.7006,10.6680, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,10.6680; !- X,Y,Z ==> Vertex 4 {m} BuildingSurface:Detailed, TopFloor_Plenum_Floor_5, !- Name Floor, !- Surface Type DropCeiling, !- Construction Name TopFloor_Plenum, !- Zone Name , !- Space Name Surface, !- Outside Boundary Condition Core_top_ZN_5_Ceiling, !- Outside Boundary Condition Object NoSun, !- Sun Exposure NoWind, !- Wind Exposure AutoCalculate, !- View Factor to Ground 4, !- Number of Vertices 4.5732,28.7006,10.6680, !- X,Y,Z ==> Vertex 1 {m} 45.3375,28.7006,10.6680, !- X,Y,Z ==> Vertex 2 {m} 45.3375,4.5732,10.6680, !- X,Y,Z ==> Vertex 3 {m} 4.5732,4.5732,10.6680; !- X,Y,Z ==> Vertex 4 {m} ! ***WINDOWS & DOORS*** FenestrationSurface:Detailed, Perimeter_bot_ZN_1_Wall_South_Window, !- Name Window, !- Surface Type Window Non-res Fixed, !- Construction Name Perimeter_bot_ZN_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.0000,0.0000,2.3293, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,1.0213, !- X,Y,Z ==> Vertex 2 {m} 49.9100,0.0000,1.0213, !- X,Y,Z ==> Vertex 3 {m} 49.9100,0.0000,2.3293; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_2_Wall_East_Window, !- Name Window, !- Surface Type Window Non-res Fixed, !- Construction Name Perimeter_bot_ZN_2_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.9110,0.0000,2.3293, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,1.0213, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2737,1.0213, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2737,2.3293; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_3_Wall_North_Window, !- Name Window, !- Surface Type Window Non-res Fixed, !- Construction Name Perimeter_bot_ZN_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.9100,33.2738,2.3293, !- X,Y,Z ==> Vertex 1 {m} 49.9100,33.2738,1.0213, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,1.0213, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,2.3293; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_bot_ZN_4_Wall_West_Window, !- Name Window, !- Surface Type Window Non-res Fixed, !- Construction Name Perimeter_bot_ZN_4_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.0000,33.2737,2.3293, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2737,1.0213, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,1.0213, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,2.3293; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_mid_ZN_1_Wall_South_Window, !- Name Window, !- Surface Type Window Non-res Fixed, !- Construction Name Perimeter_mid_ZN_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.0000,0.0000,6.2917, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,4.9837, !- X,Y,Z ==> Vertex 2 {m} 49.9100,0.0000,4.9837, !- X,Y,Z ==> Vertex 3 {m} 49.9100,0.0000,6.2917; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_mid_ZN_2_Wall_East_Window, !- Name Window, !- Surface Type Window Non-res Fixed, !- Construction Name Perimeter_mid_ZN_2_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.9110,0.0000,6.2917, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,4.9837, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2737,4.9837, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2737,6.2917; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_mid_ZN_3_Wall_North_Window, !- Name Window, !- Surface Type Window Non-res Fixed, !- Construction Name Perimeter_mid_ZN_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.9100,33.2738,6.2917, !- X,Y,Z ==> Vertex 1 {m} 49.9100,33.2738,4.9837, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,4.9837, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,6.2917; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_mid_ZN_4_Wall_West_Window, !- Name Window, !- Surface Type Window Non-res Fixed, !- Construction Name Perimeter_mid_ZN_4_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.0000,33.2737,6.2917, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2737,4.9837, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,4.9837, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,6.2917; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_top_ZN_1_Wall_South_Window, !- Name Window, !- Surface Type Window Non-res Fixed, !- Construction Name Perimeter_top_ZN_1_Wall_South, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.0000,0.0000,10.2541, !- X,Y,Z ==> Vertex 1 {m} 0.0000,0.0000,8.9461, !- X,Y,Z ==> Vertex 2 {m} 49.9100,0.0000,8.9461, !- X,Y,Z ==> Vertex 3 {m} 49.9100,0.0000,10.2541; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_top_ZN_2_Wall_East_Window, !- Name Window, !- Surface Type Window Non-res Fixed, !- Construction Name Perimeter_top_ZN_2_Wall_East, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.9110,0.0000,10.2541, !- X,Y,Z ==> Vertex 1 {m} 49.9110,0.0000,8.9461, !- X,Y,Z ==> Vertex 2 {m} 49.9110,33.2737,8.9461, !- X,Y,Z ==> Vertex 3 {m} 49.9110,33.2737,10.2541; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_top_ZN_3_Wall_North_Window, !- Name Window, !- Surface Type Window Non-res Fixed, !- Construction Name Perimeter_top_ZN_3_Wall_North, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 49.9100,33.2738,10.2541, !- X,Y,Z ==> Vertex 1 {m} 49.9100,33.2738,8.9461, !- X,Y,Z ==> Vertex 2 {m} 0.0000,33.2738,8.9461, !- X,Y,Z ==> Vertex 3 {m} 0.0000,33.2738,10.2541; !- X,Y,Z ==> Vertex 4 {m} FenestrationSurface:Detailed, Perimeter_top_ZN_4_Wall_West_Window, !- Name Window, !- Surface Type Window Non-res Fixed, !- Construction Name Perimeter_top_ZN_4_Wall_West, !- Building Surface Name , !- Outside Boundary Condition Object AutoCalculate, !- View Factor to Ground , !- Frame and Divider Name 1.0000, !- Multiplier 4, !- Number of Vertices 0.0000,33.2737,10.2541, !- X,Y,Z ==> Vertex 1 {m} 0.0000,33.2737,8.9461, !- X,Y,Z ==> Vertex 2 {m} 0.0000,0.0000,8.9461, !- X,Y,Z ==> Vertex 3 {m} 0.0000,0.0000,10.2541; !- X,Y,Z ==> Vertex 4 {m} ! ***GEOMETRY RULES*** GlobalGeometryRules, UpperLeftCorner, !- Starting Vertex Position Counterclockwise, !- Vertex Entry Direction Relative, !- Coordinate System Relative; !- Daylighting Reference Point Coordinate System ! ***PEOPLE*** People, Core_bottom People, !- Name Core_bottom, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Core_mid People, !- Name Core_mid, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Core_top People, !- Name Core_top, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_bot_ZN_1 People, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_bot_ZN_2 People, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_bot_ZN_3 People, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_bot_ZN_4 People, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_mid_ZN_1 People, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_mid_ZN_2 People, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_mid_ZN_3 People, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_mid_ZN_4 People, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_top_ZN_1 People, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_top_ZN_2 People, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_top_ZN_3 People, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type People, Perimeter_top_ZN_4 People, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList or Space or SpaceList Name BLDG_OCC_SCH, !- Number of People Schedule Name Area/Person, !- Number of People Calculation Method , !- Number of People , !- People per Floor Area {person/m2} 18.58, !- Floor Area per Person {m2/person} 0.3000, !- Fraction Radiant AUTOCALCULATE, !- Sensible Heat Fraction ACTIVITY_SCH, !- Activity Level Schedule Name , !- Carbon Dioxide Generation Rate {m3/s-W} No, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name WORK_EFF_SCH, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name CLOTHING_SCH, !- Clothing Insulation Schedule Name AIR_VELO_SCH, !- Air Velocity Schedule Name FANGER; !- Thermal Comfort Model 1 Type ! ***LIGHTS*** Lights, Core_bottom_Lights, !- Name Core_bottom, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Core_mid_Lights, !- Name Core_mid, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Core_top_Lights, !- Name Core_top, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_bot_ZN_1_Lights, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_bot_ZN_2_Lights, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_bot_ZN_3_Lights, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_bot_ZN_4_Lights, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_mid_ZN_1_Lights, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_mid_ZN_2_Lights, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_mid_ZN_3_Lights, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_mid_ZN_4_Lights, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_top_ZN_1_Lights, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_top_ZN_2_Lights, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_top_ZN_3_Lights, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature Lights, Perimeter_top_ZN_4_Lights, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList or Space or SpaceList Name BLDG_LIGHT_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Lighting Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.4000, !- Return Air Fraction 0.4000, !- Fraction Radiant 0.2000, !- Fraction Visible 1.0000, !- Fraction Replaceable General, !- End-Use Subcategory No; !- Return Air Fraction Calculated from Plenum Temperature ! ***EQUIPMENT GAINS*** ElectricEquipment, Core_bottom_PlugMisc_Equip, !- Name Core_bottom, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Core_mid_PlugMisc_Equip, !- Name Core_mid, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Core_top_PlugMisc_Equip, !- Name Core_top, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Perimeter_bot_ZN_1_PlugMisc_Equip, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Perimeter_bot_ZN_2_PlugMisc_Equip, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Perimeter_bot_ZN_3_PlugMisc_Equip, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Perimeter_bot_ZN_4_PlugMisc_Equip, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Perimeter_mid_ZN_1_PlugMisc_Equip, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Perimeter_mid_ZN_2_PlugMisc_Equip, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Perimeter_mid_ZN_3_PlugMisc_Equip, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Perimeter_mid_ZN_4_PlugMisc_Equip, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Perimeter_top_ZN_1_PlugMisc_Equip, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Perimeter_top_ZN_2_PlugMisc_Equip, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Perimeter_top_ZN_3_PlugMisc_Equip, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Perimeter_top_ZN_4_PlugMisc_Equip, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList or Space or SpaceList Name BLDG_EQUIP_SCH, !- Schedule Name Watts/Area, !- Design Level Calculation Method , !- Design Level {W} 10.76, !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost General; !- End-Use Subcategory ElectricEquipment, Core_bottom_Elevators_Equip, !- Name Core_bottom, !- Zone or ZoneList or Space or SpaceList Name BLDG_ELEVATORS, !- Schedule Name EquipmentLevel, !- Design Level Calculation Method 32109.8901098901, !- Design Level {W} , !- Watts per Zone Floor Area {W/m2} , !- Watts per Person {W/person} 0.0000, !- Fraction Latent 0.5000, !- Fraction Radiant 0.0000, !- Fraction Lost Elevators; !- End-Use Subcategory ! ***EXTERIOR LOADS*** Exterior:Lights, Exterior Facade Lighting,!- Name ALWAYS_ON, !- Schedule Name 14804, !- Design Level {W} AstronomicalClock, !- Control Option Exterior Facade Lighting;!- End-Use Subcategory ! ***INFILTRATION*** ZoneInfiltration:DesignFlowRate, FirstFloor_Plenum_Infiltration, !- Name FirstFloor_Plenum, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, MidFloor_Plenum_Infiltration, !- Name MidFloor_Plenum, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_bot_ZN_1_Infiltration, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_bot_ZN_2_Infiltration, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_bot_ZN_3_Infiltration, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_bot_ZN_4_Infiltration, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_mid_ZN_1_Infiltration, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_mid_ZN_2_Infiltration, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_mid_ZN_3_Infiltration, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_mid_ZN_4_Infiltration, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_top_ZN_1_Infiltration, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_top_ZN_2_Infiltration, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_top_ZN_3_Infiltration, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, Perimeter_top_ZN_4_Infiltration, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ZoneInfiltration:DesignFlowRate, TopFloor_Plenum_Infiltration, !- Name TopFloor_Plenum, !- Zone or ZoneList Name INFIL_QUARTER_ON_SCH, !- Schedule Name Flow/ExteriorArea, !- Design Flow Rate Calculation Method , !- Design Flow Rate {m3/s} , !- Flow per Zone Floor Area {m3/s-m2} 0.000302, !- Flow per Exterior Surface Area {m3/s-m2} , !- Air Changes per Hour {1/hr} 1.0000, !- Constant Term Coefficient 0.0000, !- Temperature Term Coefficient 0.0000, !- Velocity Term Coefficient 0.0000; !- Velocity Squared Term Coefficient ! ***INTERNAL MASS*** InternalMass, Core_bottom Internal Mass, !- Name InteriorFurnishings, !- Construction Name Core_bottom, !- Zone or ZoneList Name , !- Space or SpaceList Name 1967.0731; !- Surface Area {m2} InternalMass, Core_mid Internal Mass, !- Name InteriorFurnishings, !- Construction Name Core_mid, !- Zone or ZoneList Name , !- Space or SpaceList Name 1967.0731; !- Surface Area {m2} InternalMass, Core_top Internal Mass, !- Name InteriorFurnishings, !- Construction Name Core_top, !- Zone or ZoneList Name , !- Space or SpaceList Name 1967.0731; !- Surface Area {m2} InternalMass, Perimeter_bot_ZN_1 Internal Mass, !- Name InteriorFurnishings, !- Construction Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name , !- Space or SpaceList Name 414.6763; !- Surface Area {m2} InternalMass, Perimeter_bot_ZN_2 Internal Mass, !- Name InteriorFurnishings, !- Construction Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name , !- Space or SpaceList Name 262.5244; !- Surface Area {m2} InternalMass, Perimeter_bot_ZN_3 Internal Mass, !- Name InteriorFurnishings, !- Construction Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name , !- Space or SpaceList Name 414.6763; !- Surface Area {m2} InternalMass, Perimeter_bot_ZN_4 Internal Mass, !- Name InteriorFurnishings, !- Construction Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name , !- Space or SpaceList Name 262.5072; !- Surface Area {m2} InternalMass, Perimeter_mid_ZN_1 Internal Mass, !- Name InteriorFurnishings, !- Construction Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name , !- Space or SpaceList Name 414.6763; !- Surface Area {m2} InternalMass, Perimeter_mid_ZN_2 Internal Mass, !- Name InteriorFurnishings, !- Construction Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name , !- Space or SpaceList Name 262.5244; !- Surface Area {m2} InternalMass, Perimeter_mid_ZN_3 Internal Mass, !- Name InteriorFurnishings, !- Construction Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name , !- Space or SpaceList Name 414.6763; !- Surface Area {m2} InternalMass, Perimeter_mid_ZN_4 Internal Mass, !- Name InteriorFurnishings, !- Construction Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name , !- Space or SpaceList Name 262.5072; !- Surface Area {m2} InternalMass, Perimeter_top_ZN_1 Internal Mass, !- Name InteriorFurnishings, !- Construction Name Perimeter_top_ZN_1, !- Zone or ZoneList Name , !- Space or SpaceList Name 414.6763; !- Surface Area {m2} InternalMass, Perimeter_top_ZN_2 Internal Mass, !- Name InteriorFurnishings, !- Construction Name Perimeter_top_ZN_2, !- Zone or ZoneList Name , !- Space or SpaceList Name 262.5244; !- Surface Area {m2} InternalMass, Perimeter_top_ZN_3 Internal Mass, !- Name InteriorFurnishings, !- Construction Name Perimeter_top_ZN_3, !- Zone or ZoneList Name , !- Space or SpaceList Name 414.6763; !- Surface Area {m2} InternalMass, Perimeter_top_ZN_4 Internal Mass, !- Name InteriorFurnishings, !- Construction Name Perimeter_top_ZN_4, !- Zone or ZoneList Name , !- Space or SpaceList Name 262.5072; !- Surface Area {m2} ! ***INTERNAL GAINS SCHEDULES*** Schedule:Compact, ACTIVITY_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,120.; !- Field 3 Schedule:Compact, AIR_VELO_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, BLDG_ELEVATORS, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 07:00,0.0, !- Field 3 Until: 08:00,0.35, !- Field 5 Until: 09:00,0.69, !- Field 7 Until: 10:00,0.43, !- Field 9 Until: 11:00,0.37, !- Field 11 Until: 12:00,0.43, !- Field 13 Until: 13:00,0.58, !- Field 15 Until: 14:00,0.48, !- Field 17 Until: 15:00,0.37, !- Field 19 Until: 16:00,0.37, !- Field 21 Until: 17:00,0.46, !- Field 23 Until: 18:00,0.62, !- Field 25 Until: 19:00,0.12, !- Field 27 Until: 20:00,0.04, !- Field 29 Until: 21:00,0.04, !- Field 31 Until: 24:00,0.00, !- Field 33 For: Saturday WinterDesignDay, !- Field 35 Until: 07:00,0.0, !- Field 36 Until: 08:00,0.16, !- Field 38 Until: 09:00,0.14, !- Field 40 Until: 10:00,0.21, !- Field 42 Until: 11:00,0.18, !- Field 44 Until: 12:00,0.25, !- Field 46 Until: 13:00,0.21, !- Field 48 Until: 14:00,0.13, !- Field 50 Until: 15:00,0.08, !- Field 52 Until: 16:00,0.04, !- Field 54 Until: 17:00,0.05, !- Field 56 Until: 18:00,0.06, !- Field 58 Until: 24:00,0.00, !- Field 60 For: Sunday Holidays AllOtherDays, !- Field 62 Until: 24:00,0.0; !- Field 63 Schedule:Compact, BLDG_OCC_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: SummerDesignDay, !- Field 2 Until: 06:00,0.0, !- Field 3 Until: 22:00,1.0, !- Field 5 Until: 24:00,0.05, !- Field 7 For: Weekdays, !- Field 9 Until: 06:00,0.0, !- Field 10 Until: 07:00,0.1, !- Field 12 Until: 08:00,0.2, !- Field 14 Until: 12:00,0.95, !- Field 16 Until: 13:00,0.5, !- Field 18 Until: 17:00,0.95, !- Field 20 Until: 18:00,0.7, !- Field 22 Until: 20:00,0.4, !- Field 24 Until: 22:00,0.1, !- Field 26 Until: 24:00,0.05, !- Field 28 For: Saturday, !- Field 30 Until: 06:00,0.0, !- Field 31 Until: 08:00,0.1, !- Field 33 Until: 14:00,0.5, !- Field 35 Until: 17:00,0.1, !- Field 37 Until: 24:00,0.0, !- Field 39 For: AllOtherDays, !- Field 41 Until: 24:00,0.0; !- Field 42 Schedule:Compact, BLDG_LIGHT_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 05:00,0.05, !- Field 3 Until: 07:00,0.1, !- Field 5 Until: 08:00,0.3, !- Field 7 Until: 17:00,0.9, !- Field 9 Until: 18:00,0.7, !- Field 11 Until: 20:00,0.5, !- Field 13 Until: 22:00,0.3, !- Field 15 Until: 23:00,0.1, !- Field 17 Until: 24:00,0.05, !- Field 19 For: Saturday, !- Field 21 Until: 06:00,0.05, !- Field 22 Until: 08:00,0.1, !- Field 24 Until: 14:00,0.5, !- Field 26 Until: 17:00,0.15, !- Field 28 Until: 24:00,0.05, !- Field 30 For: SummerDesignDay, !- Field 32 Until: 24:00,1.0, !- Field 33 For: WinterDesignDay, !- Field 35 Until: 24:00,0.0, !- Field 36 For: AllOtherDays, !- Field 38 Until: 24:00,0.05; !- Field 39 Schedule:Compact, BLDG_EQUIP_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 08:00,0.40, !- Field 3 Until: 12:00,0.90, !- Field 5 Until: 13:00,0.80, !- Field 7 Until: 17:00,0.90, !- Field 9 Until: 18:00,0.80, !- Field 11 Until: 20:00,0.60, !- Field 13 Until: 22:00,0.50, !- Field 15 Until: 24:00,0.40, !- Field 17 For: Saturday, !- Field 19 Until: 06:00,0.30, !- Field 20 Until: 08:00,0.4, !- Field 22 Until: 14:00,0.5, !- Field 24 Until: 17:00,0.35, !- Field 26 Until: 24:00,0.30, !- Field 28 For: SummerDesignDay, !- Field 30 Until: 24:00,1.0, !- Field 31 For: WinterDesignDay, !- Field 33 Until: 24:00,0.0, !- Field 34 For: AllOtherDays, !- Field 36 Until: 24:00,0.30; !- Field 37 Schedule:Compact, CLOTHING_SCH, !- Name Any Number, !- Schedule Type Limits Name Through: 04/30, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,1.0, !- Field 3 Through: 09/30, !- Field 5 For: AllDays, !- Field 6 Until: 24:00,0.5, !- Field 7 Through: 12/31, !- Field 9 For: AllDays, !- Field 10 Until: 24:00,1.0; !- Field 11 Schedule:Compact, INFIL_QUARTER_ON_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 06:00,1.0, !- Field 3 Until: 22:00,0.25, !- Field 5 Until: 24:00,1.0, !- Field 7 For: Saturday WinterDesignDay, !- Field 9 Until: 06:00,1.0, !- Field 10 Until: 18:00,0.25, !- Field 12 Until: 24:00,1.0, !- Field 14 For: Sunday Holidays AllOtherDays, !- Field 16 Until: 24:00,1.0; !- Field 17 Schedule:Compact, WORK_EFF_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.0; !- Field 3 ! ***HVAC EQUIPMENT*** Fan:VariableVolume, VAV_1_Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.5915, !- Fan Total Efficiency 1109.648, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method , !- Fan Power Minimum Flow Fraction 0.0000, !- Fan Power Minimum Air Flow Rate {m3/s} 0.91, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0407598940, !- Fan Power Coefficient 1 0.08804497, !- Fan Power Coefficient 2 -0.072926120, !- Fan Power Coefficient 3 0.9437398230, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_1_HeatC-VAV_1_FanNode, !- Air Inlet Node Name VAV_1 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan Energy; !- End-Use Subcategory Fan:VariableVolume, VAV_2_Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.5915, !- Fan Total Efficiency 1109.648, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method , !- Fan Power Minimum Flow Fraction 0.0000, !- Fan Power Minimum Air Flow Rate {m3/s} 0.91, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0407598940, !- Fan Power Coefficient 1 0.08804497, !- Fan Power Coefficient 2 -0.072926120, !- Fan Power Coefficient 3 0.9437398230, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_2_HeatC-VAV_2_FanNode, !- Air Inlet Node Name VAV_2 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan Energy; !- End-Use Subcategory Fan:VariableVolume, VAV_3_Fan, !- Name HVACOperationSchd, !- Availability Schedule Name 0.5915, !- Fan Total Efficiency 1109.648, !- Pressure Rise {Pa} AUTOSIZE, !- Maximum Flow Rate {m3/s} FixedFlowRate, !- Fan Power Minimum Flow Rate Input Method , !- Fan Power Minimum Flow Fraction 0.0000, !- Fan Power Minimum Air Flow Rate {m3/s} 0.91, !- Motor Efficiency 1.0, !- Motor In Airstream Fraction 0.0407598940, !- Fan Power Coefficient 1 0.08804497, !- Fan Power Coefficient 2 -0.072926120, !- Fan Power Coefficient 3 0.9437398230, !- Fan Power Coefficient 4 0, !- Fan Power Coefficient 5 VAV_3_HeatC-VAV_3_FanNode, !- Air Inlet Node Name VAV_3 Supply Equipment Outlet Node, !- Air Outlet Node Name Fan Energy; !- End-Use Subcategory Coil:Heating:Fuel, VAV_1_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.8, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} VAV_1_CoolC-VAV_1_HeatCNode, !- Air Inlet Node Name VAV_1_HeatC-VAV_1_FanNode, !- Air Outlet Node Name VAV_1_HeatC-VAV_1_FanNode; !- Temperature Setpoint Node Name Coil:Heating:Fuel, VAV_2_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.8, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} VAV_2_CoolC-VAV_2_HeatCNode, !- Air Inlet Node Name VAV_2_HeatC-VAV_2_FanNode, !- Air Outlet Node Name VAV_2_HeatC-VAV_2_FanNode; !- Temperature Setpoint Node Name Coil:Heating:Fuel, VAV_3_HeatC, !- Name ALWAYS_ON, !- Availability Schedule Name NaturalGas, !- Fuel Type 0.8, !- Burner Efficiency AUTOSIZE, !- Nominal Capacity {W} VAV_3_CoolC-VAV_3_HeatCNode, !- Air Inlet Node Name VAV_3_HeatC-VAV_3_FanNode, !- Air Outlet Node Name VAV_3_HeatC-VAV_3_FanNode; !- Temperature Setpoint Node Name Coil:Cooling:DX:TwoSpeed, VAV_1_CoolC DXCoil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- High Speed Gross Rated Total Cooling Capacity {W} AUTOSIZE, !- High Speed Rated Sensible Heat Ratio 3.23372055845678, !- High Speed Gross Rated Cooling COP {W/W} AUTOSIZE, !- High Speed Rated Air Flow Rate {m3/s} , !- Unit Internal Static Air Pressure {Pa} VAV_1_OA-VAV_1_CoolCNode,!- Air Inlet Node Name VAV_1_CoolC-VAV_1_HeatCNode, !- Air Outlet Node Name Measured_CoolCStandard10Ton_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name Measured_CoolCStandard10Ton_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name Measured_CoolCStandard10Ton_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name Measured_CoolCStandard10Ton_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name No_PLR_Degredation, !- Part Load Fraction Correlation Curve Name AUTOSIZE, !- Low Speed Gross Rated Total Cooling Capacity {W} AUTOSIZE, !- Low Speed Gross Rated Sensible Heat Ratio 3.28186528141147, !- Low Speed Gross Rated Cooling COP {W/W} AUTOSIZE, !- Low Speed Rated Air Flow Rate {m3/s} Measured_LowSpeedCoolCapLSFT, !- Low Speed Total Cooling Capacity Function of Temperature Curve Name Measured_LowSpeedCoolEIRLSFT, !- Low Speed Energy Input Ratio Function of Temperature Curve Name ; !- Condenser Air Inlet Node Name Coil:Cooling:DX:TwoSpeed, VAV_2_CoolC DXCoil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- High Speed Gross Rated Total Cooling Capacity {W} AUTOSIZE, !- High Speed Rated Sensible Heat Ratio 3.23372055845678, !- High Speed Gross Rated Cooling COP {W/W} AUTOSIZE, !- High Speed Rated Air Flow Rate {m3/s} , !- Unit Internal Static Air Pressure {Pa} VAV_2_OA-VAV_2_CoolCNode,!- Air Inlet Node Name VAV_2_CoolC-VAV_2_HeatCNode, !- Air Outlet Node Name Measured_CoolCStandard10Ton_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name Measured_CoolCStandard10Ton_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name Measured_CoolCStandard10Ton_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name Measured_CoolCStandard10Ton_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name No_PLR_Degredation, !- Part Load Fraction Correlation Curve Name AUTOSIZE, !- Low Speed Gross Rated Total Cooling Capacity {W} AUTOSIZE, !- Low Speed Gross Rated Sensible Heat Ratio 3.28186528141147, !- Low Speed Gross Rated Cooling COP {W/W} AUTOSIZE, !- Low Speed Rated Air Flow Rate {m3/s} Measured_LowSpeedCoolCapLSFT, !- Low Speed Total Cooling Capacity Function of Temperature Curve Name Measured_LowSpeedCoolEIRLSFT, !- Low Speed Energy Input Ratio Function of Temperature Curve Name ; !- Condenser Air Inlet Node Name Coil:Cooling:DX:TwoSpeed, VAV_3_CoolC DXCoil, !- Name ALWAYS_ON, !- Availability Schedule Name AUTOSIZE, !- High Speed Gross Rated Total Cooling Capacity {W} AUTOSIZE, !- High Speed Rated Sensible Heat Ratio 3.23372055845678, !- High Speed Gross Rated Cooling COP {W/W} AUTOSIZE, !- High Speed Rated Air Flow Rate {m3/s} , !- Unit Internal Static Air Pressure {Pa} VAV_3_OA-VAV_3_CoolCNode,!- Air Inlet Node Name VAV_3_CoolC-VAV_3_HeatCNode, !- Air Outlet Node Name Measured_CoolCStandard10Ton_CapFT, !- Total Cooling Capacity Function of Temperature Curve Name Measured_CoolCStandard10Ton_CapFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name Measured_CoolCStandard10Ton_EIRFT, !- Energy Input Ratio Function of Temperature Curve Name Measured_CoolCStandard10Ton_EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name No_PLR_Degredation, !- Part Load Fraction Correlation Curve Name AUTOSIZE, !- Low Speed Gross Rated Total Cooling Capacity {W} AUTOSIZE, !- Low Speed Gross Rated Sensible Heat Ratio 3.28186528141147, !- Low Speed Gross Rated Cooling COP {W/W} AUTOSIZE, !- Low Speed Rated Air Flow Rate {m3/s} Measured_LowSpeedCoolCapLSFT, !- Low Speed Total Cooling Capacity Function of Temperature Curve Name Measured_LowSpeedCoolEIRLSFT, !- Low Speed Energy Input Ratio Function of Temperature Curve Name ; !- Condenser Air Inlet Node Name Coil:Heating:Electric, Core_bottom VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Core_bottom VAV Box Damper Node, !- Air Inlet Node Name Core_bottom VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Core_mid VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Core_mid VAV Box Damper Node, !- Air Inlet Node Name Core_mid VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Core_top VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Core_top VAV Box Damper Node, !- Air Inlet Node Name Core_top VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Perimeter_bot_ZN_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_bot_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_bot_ZN_1 VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Perimeter_bot_ZN_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_bot_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_bot_ZN_2 VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Perimeter_bot_ZN_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_bot_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_bot_ZN_3 VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Perimeter_bot_ZN_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_bot_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_bot_ZN_4 VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Perimeter_mid_ZN_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_mid_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_mid_ZN_1 VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Perimeter_mid_ZN_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_mid_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_mid_ZN_2 VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Perimeter_mid_ZN_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_mid_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_mid_ZN_3 VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Perimeter_mid_ZN_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_mid_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_mid_ZN_4 VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Perimeter_top_ZN_1 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_top_ZN_1 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_top_ZN_1 VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Perimeter_top_ZN_2 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_top_ZN_2 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_top_ZN_2 VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Perimeter_top_ZN_3 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_top_ZN_3 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_top_ZN_3 VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name Coil:Heating:Electric, Perimeter_top_ZN_4 VAV Box Reheat Coil, !- Name ALWAYS_ON, !- Availability Schedule Name 1, !- Efficiency AUTOSIZE, !- Nominal Capacity {W} Perimeter_top_ZN_4 VAV Box Damper Node, !- Air Inlet Node Name Perimeter_top_ZN_4 VAV Box Outlet Node Name, !- Air Outlet Node Name ; !- Temperature Setpoint Node Name AirTerminal:SingleDuct:VAV:Reheat, Core_bottom VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Core_bottom VAV Box Damper Node, !- Damper Air Outlet Node Name Core_bottom VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Core_bottom VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Core_bottom VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Core_mid VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Core_mid VAV Box Damper Node, !- Damper Air Outlet Node Name Core_mid VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Core_mid VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Core_mid VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Core_top VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Core_top VAV Box Damper Node, !- Damper Air Outlet Node Name Core_top VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Core_top VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Core_top VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Perimeter_bot_ZN_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_bot_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_bot_ZN_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_bot_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_bot_ZN_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Perimeter_bot_ZN_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_bot_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_bot_ZN_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_bot_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_bot_ZN_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Perimeter_bot_ZN_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_bot_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_bot_ZN_3 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_bot_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_bot_ZN_3 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Perimeter_bot_ZN_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_bot_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_bot_ZN_4 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_bot_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_bot_ZN_4 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Perimeter_mid_ZN_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_mid_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_mid_ZN_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_mid_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_mid_ZN_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Perimeter_mid_ZN_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_mid_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_mid_ZN_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_mid_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_mid_ZN_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Perimeter_mid_ZN_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_mid_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_mid_ZN_3 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_mid_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_mid_ZN_3 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Perimeter_mid_ZN_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_mid_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_mid_ZN_4 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_mid_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_mid_ZN_4 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Perimeter_top_ZN_1 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_top_ZN_1 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_top_ZN_1 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_top_ZN_1 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_top_ZN_1 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Perimeter_top_ZN_2 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_top_ZN_2 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_top_ZN_2 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_top_ZN_2 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_top_ZN_2 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Perimeter_top_ZN_3 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_top_ZN_3 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_top_ZN_3 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_top_ZN_3 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_top_ZN_3 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat AirTerminal:SingleDuct:VAV:Reheat, Perimeter_top_ZN_4 VAV Box Component, !- Name ALWAYS_ON, !- Availability Schedule Name Perimeter_top_ZN_4 VAV Box Damper Node, !- Damper Air Outlet Node Name Perimeter_top_ZN_4 VAV Box Inlet Node Name, !- Air Inlet Node Name AUTOSIZE, !- Maximum Air Flow Rate {m3/s} Constant, !- Zone Minimum Air Flow Input Method 0.3, !- Constant Minimum Air Flow Fraction , !- Fixed Minimum Air Flow Rate {m3/s} , !- Minimum Air Flow Fraction Schedule Name Coil:Heating:Electric, !- Reheat Coil Object Type Perimeter_top_ZN_4 VAV Box Reheat Coil, !- Reheat Coil Name AUTOSIZE, !- Maximum Hot Water or Steam Flow Rate {m3/s} 0.0, !- Minimum Hot Water or Steam Flow Rate {m3/s} Perimeter_top_ZN_4 VAV Box Outlet Node Name, !- Air Outlet Node Name 0.001, !- Convergence Tolerance NORMAL, !- Damper Heating Action , !- Maximum Flow per Zone Floor Area During Reheat {m3/s-m2} ; !- Maximum Flow Fraction During Reheat ZoneHVAC:EquipmentList, Core_bottom Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Core_bottom VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Core_mid Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Core_mid VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Core_top Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Core_top VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Perimeter_bot_ZN_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_bot_ZN_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Perimeter_bot_ZN_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_bot_ZN_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Perimeter_bot_ZN_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_bot_ZN_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Perimeter_bot_ZN_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_bot_ZN_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Perimeter_mid_ZN_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_mid_ZN_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Perimeter_mid_ZN_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_mid_ZN_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Perimeter_mid_ZN_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_mid_ZN_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Perimeter_mid_ZN_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_mid_ZN_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Perimeter_top_ZN_1 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_top_ZN_1 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Perimeter_top_ZN_2 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_top_ZN_2 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Perimeter_top_ZN_3 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_top_ZN_3 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ZoneHVAC:EquipmentList, Perimeter_top_ZN_4 Equipment, !- Name SequentialLoad, !- Load Distribution Scheme ZoneHVAC:AirDistributionUnit, !- Zone Equipment 1 Object Type Perimeter_top_ZN_4 VAV Box, !- Zone Equipment 1 Name 1, !- Zone Equipment 1 Cooling Sequence 1, !- Zone Equipment 1 Heating or No-Load Sequence , !- Zone Equipment 1 Sequential Cooling Fraction Schedule Name ; !- Zone Equipment 1 Sequential Heating Fraction Schedule Name ! ***SIZING & CONTROLS*** Sizing:Zone, Core_bottom, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Core_bottom, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Core_bottom, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Core_mid, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Core_mid, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Core_mid, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Core_top, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Core_top, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Core_top, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_bot_ZN_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_bot_ZN_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Perimeter_bot_ZN_1, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_bot_ZN_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_bot_ZN_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Perimeter_bot_ZN_2, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_bot_ZN_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_bot_ZN_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Perimeter_bot_ZN_3, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_bot_ZN_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_bot_ZN_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Perimeter_bot_ZN_4, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_mid_ZN_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_mid_ZN_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Perimeter_mid_ZN_1, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_mid_ZN_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_mid_ZN_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Perimeter_mid_ZN_2, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_mid_ZN_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_mid_ZN_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Perimeter_mid_ZN_3, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_mid_ZN_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_mid_ZN_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Perimeter_mid_ZN_4, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_top_ZN_1, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_top_ZN_1, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Perimeter_top_ZN_1, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_top_ZN_2, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_top_ZN_2, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Perimeter_top_ZN_2, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_top_ZN_3, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_top_ZN_3, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Perimeter_top_ZN_3, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} Sizing:Zone, Perimeter_top_ZN_4, !- Zone or ZoneList Name SupplyAirTemperature, !- Zone Cooling Design Supply Air Temperature Input Method 12.8000, !- Zone Cooling Design Supply Air Temperature {C} , !- Zone Cooling Design Supply Air Temperature Difference {deltaC} SupplyAirTemperature, !- Zone Heating Design Supply Air Temperature Input Method 50.0000, !- Zone Heating Design Supply Air Temperature {C} , !- Zone Heating Design Supply Air Temperature Difference {deltaC} 0.0085, !- Zone Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Zone Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} SZ DSOA Perimeter_top_ZN_4, !- Design Specification Outdoor Air Object Name , !- Zone Heating Sizing Factor , !- Zone Cooling Sizing Factor DesignDay, !- Cooling Design Air Flow Method , !- Cooling Design Air Flow Rate {m3/s} , !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2} , !- Cooling Minimum Air Flow {m3/s} , !- Cooling Minimum Air Flow Fraction DesignDay, !- Heating Design Air Flow Method , !- Heating Design Air Flow Rate {m3/s} , !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2} , !- Heating Maximum Air Flow {m3/s} , !- Heating Maximum Air Flow Fraction , !- Design Specification Zone Air Distribution Object Name No, !- Account for Dedicated Outdoor Air System NeutralSupplyAir, !- Dedicated Outdoor Air System Control Strategy autosize, !- Dedicated Outdoor Air Low Setpoint Temperature for Design {C} autosize; !- Dedicated Outdoor Air High Setpoint Temperature for Design {C} DesignSpecification:OutdoorAir, SZ DSOA Perimeter_top_ZN_4, !- Name Flow/Person, !- Outdoor Air Method 0.0125, !- Outdoor Air Flow per Person {m3/s-person} , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2} ; !- Outdoor Air Flow per Zone {m3/s} SetpointManager:Scheduled, VAV_1 SAT setpoint, !- Name Temperature, !- Control Variable Seasonal-Reset-Supply-Air-Temp-Sch, !- Schedule Name VAV_1 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, VAV_2 SAT setpoint, !- Name Temperature, !- Control Variable Seasonal-Reset-Supply-Air-Temp-Sch, !- Schedule Name VAV_2 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name SetpointManager:Scheduled, VAV_3 SAT setpoint, !- Name Temperature, !- Control Variable Seasonal-Reset-Supply-Air-Temp-Sch, !- Schedule Name VAV_3 Supply Equipment Outlet Node; !- Setpoint Node or NodeList Name ZoneControl:Thermostat, Core_bottom Thermostat, !- Name Core_bottom, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_bottom DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Core_mid Thermostat, !- Name Core_mid, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_mid DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Core_top Thermostat, !- Name Core_top, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Core_top DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_bot_ZN_1 Thermostat, !- Name Perimeter_bot_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_bot_ZN_2 Thermostat, !- Name Perimeter_bot_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_bot_ZN_3 Thermostat, !- Name Perimeter_bot_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_bot_ZN_4 Thermostat, !- Name Perimeter_bot_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_bot_ZN_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_mid_ZN_1 Thermostat, !- Name Perimeter_mid_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_mid_ZN_2 Thermostat, !- Name Perimeter_mid_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_mid_ZN_3 Thermostat, !- Name Perimeter_mid_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_mid_ZN_4 Thermostat, !- Name Perimeter_mid_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_mid_ZN_4 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_top_ZN_1 Thermostat, !- Name Perimeter_top_ZN_1, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_1 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_top_ZN_2 Thermostat, !- Name Perimeter_top_ZN_2, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_2 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_top_ZN_3 Thermostat, !- Name Perimeter_top_ZN_3, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_3 DualSPSched; !- Control 1 Name ZoneControl:Thermostat, Perimeter_top_ZN_4 Thermostat, !- Name Perimeter_top_ZN_4, !- Zone or ZoneList Name Dual Zone Control Type Sched, !- Control Type Schedule Name ThermostatSetpoint:DualSetpoint, !- Control 1 Object Type Perimeter_top_ZN_4 DualSPSched; !- Control 1 Name ThermostatSetpoint:DualSetpoint, Core_bottom DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Core_mid DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Core_top DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_bot_ZN_1 DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_bot_ZN_2 DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_bot_ZN_3 DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_bot_ZN_4 DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_mid_ZN_1 DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_mid_ZN_2 DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_mid_ZN_3 DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_mid_ZN_4 DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_top_ZN_1 DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_top_ZN_2 DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_top_ZN_3 DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name ThermostatSetpoint:DualSetpoint, Perimeter_top_ZN_4 DualSPSched, !- Name HTGSETP_SCH, !- Heating Setpoint Temperature Schedule Name CLGSETP_SCH; !- Cooling Setpoint Temperature Schedule Name Sizing:System, VAV_1, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 0.3, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 16.7000, !- Central Heating Design Supply Air Temperature {C} NonCoincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless} CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method Sizing:System, VAV_2, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 0.3, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 16.7000, !- Central Heating Design Supply Air Temperature {C} NonCoincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless} CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method Sizing:System, VAV_3, !- AirLoop Name Sensible, !- Type of Load to Size On AUTOSIZE, !- Design Outdoor Air Flow Rate {m3/s} 0.3, !- Central Heating Maximum System Air Flow Ratio 7.0, !- Preheat Design Temperature {C} 0.008, !- Preheat Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Precool Design Temperature {C} 0.008, !- Precool Design Humidity Ratio {kgWater/kgDryAir} 12.8000, !- Central Cooling Design Supply Air Temperature {C} 16.7000, !- Central Heating Design Supply Air Temperature {C} NonCoincident, !- Type of Zone Sum to Use No, !- 100% Outdoor Air in Cooling No, !- 100% Outdoor Air in Heating 0.0085, !- Central Cooling Design Supply Air Humidity Ratio {kgWater/kgDryAir} 0.0080, !- Central Heating Design Supply Air Humidity Ratio {kgWater/kgDryAir} DesignDay, !- Cooling Supply Air Flow Rate Method 0.0, !- Cooling Supply Air Flow Rate {m3/s} , !- Cooling Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Cooling Fraction of Autosized Cooling Supply Air Flow Rate , !- Cooling Supply Air Flow Rate Per Unit Cooling Capacity {m3/s-W} DesignDay, !- Heating Supply Air Flow Rate Method 0.0, !- Heating Supply Air Flow Rate {m3/s} , !- Heating Supply Air Flow Rate Per Floor Area {m3/s-m2} , !- Heating Fraction of Autosized Heating Supply Air Flow Rate , !- Heating Fraction of Autosized Cooling Supply Air Flow Rate , !- Heating Supply Air Flow Rate Per Unit Heating Capacity {m3/s-W} ZoneSum, !- System Outdoor Air Method 1.0, !- Zone Maximum Outdoor Air Fraction {dimensionless} CoolingDesignCapacity, !- Cooling Design Capacity Method autosize, !- Cooling Design Capacity {W} , !- Cooling Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Cooling Design Capacity HeatingDesignCapacity, !- Heating Design Capacity Method autosize, !- Heating Design Capacity {W} , !- Heating Design Capacity Per Floor Area {W/m2} , !- Fraction of Autosized Heating Design Capacity OnOff; !- Central Cooling Capacity Control Method Controller:OutdoorAir, VAV_1_OA_Controller, !- Name VAV_1_OARelief Node, !- Relief Air Outlet Node Name VAV_1 Supply Equipment Inlet Node, !- Return Air Node Name VAV_1_OA-VAV_1_CoolCNode,!- Mixed Air Node Name VAV_1_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name -100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} NoLockout, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name , !- Maximum Fraction of Outdoor Air Schedule Name ; !- Mechanical Ventilation Controller Name Controller:OutdoorAir, VAV_2_OA_Controller, !- Name VAV_2_OARelief Node, !- Relief Air Outlet Node Name VAV_2 Supply Equipment Inlet Node, !- Return Air Node Name VAV_2_OA-VAV_2_CoolCNode,!- Mixed Air Node Name VAV_2_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name -100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} NoLockout, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name , !- Maximum Fraction of Outdoor Air Schedule Name ; !- Mechanical Ventilation Controller Name Controller:OutdoorAir, VAV_3_OA_Controller, !- Name VAV_3_OARelief Node, !- Relief Air Outlet Node Name VAV_3 Supply Equipment Inlet Node, !- Return Air Node Name VAV_3_OA-VAV_3_CoolCNode,!- Mixed Air Node Name VAV_3_OAInlet Node, !- Actuator Node Name AUTOSIZE, !- Minimum Outdoor Air Flow Rate {m3/s} AUTOSIZE, !- Maximum Outdoor Air Flow Rate {m3/s} DifferentialDryBulb, !- Economizer Control Type ModulateFlow, !- Economizer Control Action Type 28.0, !- Economizer Maximum Limit Dry-Bulb Temperature {C} 64000.0, !- Economizer Maximum Limit Enthalpy {J/kg} , !- Economizer Maximum Limit Dewpoint Temperature {C} , !- Electronic Enthalpy Limit Curve Name -100.0, !- Economizer Minimum Limit Dry-Bulb Temperature {C} NoLockout, !- Lockout Type FixedMinimum, !- Minimum Limit Type MinOA_MotorizedDamper_Sched, !- Minimum Outdoor Air Schedule Name , !- Minimum Fraction of Outdoor Air Schedule Name , !- Maximum Fraction of Outdoor Air Schedule Name ; !- Mechanical Ventilation Controller Name !- Stage 1 : Lennox LGE Measured Total Cooling Capacity Function of Temperature Curve !- bi-quadratic curve = a + b*wb + c*wb**2 + d*edb + e*edb**2 + f*wb*edb !- wb = entering wet-bulb temperature (C) !- edb = dry-bulb temperature seen by the condenser (C) Curve:Biquadratic, Measured_LowSpeedCoolCapLSFT, !- Name 0.4136, !- Coefficient1 Constant 0.03105, !- Coefficient2 x 0, !- Coefficient3 x**2 0.006952, !- Coefficient4 y -0.00021280, !- Coefficient5 y**2 0, !- Coefficient6 x*y 11.1, !- Minimum Value of x 29.4, !- Maximum Value of x 10.0, !- Minimum Value of y 50.3; !- Maximum Value of y !- Stage 2 : Lennox LGE Measured Total Cooling Capacity Function of Temperature Curve !- bi-quadratic curve = a + b*wb + c*wb**2 + d*edb + e*edb**2 + f*wb*edb !- wb = entering wet-bulb temperature (C) !- edb = dry-bulb temperature seen by the condenser (C) Curve:Biquadratic, Measured_CoolCStandard10Ton_CapFT, !- Name 0.52357, !- Coefficient1 Constant 0.03478, !- Coefficient2 x 0, !- Coefficient3 x**2 -0.001915, !- Coefficient4 y -0.00010838, !- Coefficient5 y**2 0, !- Coefficient6 x*y 11.1, !- Minimum Value of x 29.4, !- Maximum Value of x 10.0, !- Minimum Value of y 50.3; !- Maximum Value of y !- Stage 2 : Lennox LGE Measured Total Cooling Capacity Function of Flow Fraction Curve !- quadratic curve = a + b*ff + c*ff**2 !- ff = fraction of the full load flow Curve:Quadratic, Measured_CoolCStandard10Ton_CapFF, !- Name 0.7685, !- Coefficient1 Constant 0.2315, !- Coefficient2 x 0, !- Coefficient3 x**2 0.776, !- Minimum Value of x 1.197; !- Maximum Value of x !- Stage 1 : Lennox LGE Measured Energy Input Ratio Function of Temperature Curve !- bi-quadratic curve = a + b*wb + c*wb**2 + d*edb + e*edb**2 + f*wb*edb !- wb = entering wet-bulb temperature (C) !- edb = dry-bulb temperature seen by the condenser (C) Curve:Biquadratic, Measured_LowSpeedCoolEIRLSFT, !- Name 1.1389, !- Coefficient1 Constant -0.04518, !- Coefficient2 x 0.0014298, !- Coefficient3 x**2 0.006044, !- Coefficient4 y 0.0006745, !- Coefficient5 y**2 -0.0012325, !- Coefficient6 x*y 11.1, !- Minimum Value of x 29.4, !- Maximum Value of x 10.0, !- Minimum Value of y 50.3; !- Maximum Value of y !- Stage 2 : Lennox LGE Measured Energy Input Ratio Function of Temperature Curve !- bi-quadratic curve = a + b*wb + c*wb**2 + d*edb + e*edb**2 + f*wb*edb !- wb = entering wet-bulb temperature (C) !- edb = dry-bulb temperature seen by the condenser (C) Curve:Biquadratic, Measured_CoolCStandard10Ton_EIRFT, !- Name 0.9847, !- Coefficient1 Constant -0.04285, !- Coefficient2 x 0.0013562, !- Coefficient3 x**2 0.009934, !- Coefficient4 y 0.0006398, !- Coefficient5 y**2 -0.0011690, !- Coefficient6 x*y 11.1, !- Minimum Value of x 29.4, !- Maximum Value of x 10.0, !- Minimum Value of y 50.3; !- Maximum Value of y !- Stage 2 : Lennox LGE Measured Energy Input Ratio Function of Flow Fraction Curve !- quadratic curve = a + b*ff + c*ff**2 !- ff = fraction of the full load flow Curve:Quadratic, Measured_CoolCStandard10Ton_EIRFFF, !- Name 1.192, !- Coefficient1 Constant -0.1917, !- Coefficient2 x 0, !- Coefficient3 x**2 0.776, !- Minimum Value of x 1.197; !- Maximum Value of x !- Part Load Fraction Correlation Curve [Assuming no compressor cycling degredation at part loads] !- quadratic curve = a + b*PLR + c*PLR**2 !- PLR = part load ratio (sensible cooling load/steady-state sensible cooling capacity) Curve:Quadratic, No_PLR_Degredation, !- Name 1.0, !- Coefficient1 Constant 0, !- Coefficient2 x 0, !- Coefficient3 x**2 0.0, !- Minimum Value of x 1.0; !- Maximum Value of x ! ***AIR LOOPS*** AirLoopHVAC, VAV_1, !- Name , !- Controller List Name VAV_1 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_1 Air Loop Branches, !- Branch List Name , !- Connector List Name VAV_1 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_1 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_1 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_1 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, VAV_2, !- Name , !- Controller List Name VAV_2 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_2 Air Loop Branches, !- Branch List Name , !- Connector List Name VAV_2 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_2 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_2 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_2 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names AirLoopHVAC, VAV_3, !- Name , !- Controller List Name VAV_3 Availability Manager List, !- Availability Manager List Name AUTOSIZE, !- Design Supply Air Flow Rate {m3/s} VAV_3 Air Loop Branches, !- Branch List Name , !- Connector List Name VAV_3 Supply Equipment Inlet Node, !- Supply Side Inlet Node Name VAV_3 Zone Equipment Outlet Node, !- Demand Side Outlet Node Name VAV_3 Zone Equipment Inlet Node, !- Demand Side Inlet Node Names VAV_3 Supply Equipment Outlet Node; !- Supply Side Outlet Node Names CoilSystem:Cooling:DX, VAV_1_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name VAV_1_OA-VAV_1_CoolCNode,!- DX Cooling Coil System Inlet Node Name VAV_1_CoolC-VAV_1_HeatCNode, !- DX Cooling Coil System Outlet Node Name VAV_1_CoolC-VAV_1_HeatCNode, !- DX Cooling Coil System Sensor Node Name Coil:Cooling:DX:TwoSpeed,!- Cooling Coil Object Type VAV_1_CoolC DXCoil; !- Cooling Coil Name CoilSystem:Cooling:DX, VAV_2_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name VAV_2_OA-VAV_2_CoolCNode,!- DX Cooling Coil System Inlet Node Name VAV_2_CoolC-VAV_2_HeatCNode, !- DX Cooling Coil System Outlet Node Name VAV_2_CoolC-VAV_2_HeatCNode, !- DX Cooling Coil System Sensor Node Name Coil:Cooling:DX:TwoSpeed,!- Cooling Coil Object Type VAV_2_CoolC DXCoil; !- Cooling Coil Name CoilSystem:Cooling:DX, VAV_3_CoolC, !- Name ALWAYS_ON, !- Availability Schedule Name VAV_3_OA-VAV_3_CoolCNode,!- DX Cooling Coil System Inlet Node Name VAV_3_CoolC-VAV_3_HeatCNode, !- DX Cooling Coil System Outlet Node Name VAV_3_CoolC-VAV_3_HeatCNode, !- DX Cooling Coil System Sensor Node Name Coil:Cooling:DX:TwoSpeed,!- Cooling Coil Object Type VAV_3_CoolC DXCoil; !- Cooling Coil Name AirLoopHVAC:ReturnPlenum, VAV_2 Return Plenum, !- Name MidFloor_Plenum, !- Zone Name MIDFLOOR_PLENUMPlenumNode, !- Zone Node Name MIDFLOOR_PLENUMPlenumOutletNode, !- Outlet Node Name , !- Induced Air Outlet Node or NodeList Name Core_mid Return Air Node Name, !- Inlet 1 Node Name Perimeter_mid_ZN_1 Return Air Node Name, !- Inlet 2 Node Name Perimeter_mid_ZN_2 Return Air Node Name, !- Inlet 3 Node Name Perimeter_mid_ZN_3 Return Air Node Name, !- Inlet 4 Node Name Perimeter_mid_ZN_4 Return Air Node Name; !- Inlet 5 Node Name AirLoopHVAC:ReturnPlenum, VAV_1 Return Plenum, !- Name FirstFloor_Plenum, !- Zone Name FIRSTFLOOR_PLENUMPlenumNode, !- Zone Node Name FIRSTFLOOR_PLENUMPlenumOutletNode, !- Outlet Node Name , !- Induced Air Outlet Node or NodeList Name Core_bottom Return Air Node Name, !- Inlet 1 Node Name Perimeter_bot_ZN_1 Return Air Node Name, !- Inlet 2 Node Name Perimeter_bot_ZN_2 Return Air Node Name, !- Inlet 3 Node Name Perimeter_bot_ZN_3 Return Air Node Name, !- Inlet 4 Node Name Perimeter_bot_ZN_4 Return Air Node Name; !- Inlet 5 Node Name AirLoopHVAC:ReturnPlenum, VAV_3 Return Plenum, !- Name TopFloor_Plenum, !- Zone Name TOPFLOOR_PLENUMPlenumNode, !- Zone Node Name TOPFLOOR_PLENUMPlenumOutletNode, !- Outlet Node Name , !- Induced Air Outlet Node or NodeList Name Core_top Return Air Node Name, !- Inlet 1 Node Name Perimeter_top_ZN_1 Return Air Node Name, !- Inlet 2 Node Name Perimeter_top_ZN_2 Return Air Node Name, !- Inlet 3 Node Name Perimeter_top_ZN_3 Return Air Node Name, !- Inlet 4 Node Name Perimeter_top_ZN_4 Return Air Node Name; !- Inlet 5 Node Name ! ***CONNECTIONS*** ZoneHVAC:EquipmentConnections, Core_bottom, !- Zone Name Core_bottom Equipment, !- Zone Conditioning Equipment List Name Core_bottom Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Core_bottom Air Node, !- Zone Air Node Name Core_bottom Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Core_mid, !- Zone Name Core_mid Equipment, !- Zone Conditioning Equipment List Name Core_mid Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Core_mid Air Node, !- Zone Air Node Name Core_mid Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Core_top, !- Zone Name Core_top Equipment, !- Zone Conditioning Equipment List Name Core_top Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Core_top Air Node, !- Zone Air Node Name Core_top Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_bot_ZN_1, !- Zone Name Perimeter_bot_ZN_1 Equipment, !- Zone Conditioning Equipment List Name Perimeter_bot_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_bot_ZN_1 Air Node, !- Zone Air Node Name Perimeter_bot_ZN_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_bot_ZN_2, !- Zone Name Perimeter_bot_ZN_2 Equipment, !- Zone Conditioning Equipment List Name Perimeter_bot_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_bot_ZN_2 Air Node, !- Zone Air Node Name Perimeter_bot_ZN_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_bot_ZN_3, !- Zone Name Perimeter_bot_ZN_3 Equipment, !- Zone Conditioning Equipment List Name Perimeter_bot_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_bot_ZN_3 Air Node, !- Zone Air Node Name Perimeter_bot_ZN_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_bot_ZN_4, !- Zone Name Perimeter_bot_ZN_4 Equipment, !- Zone Conditioning Equipment List Name Perimeter_bot_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_bot_ZN_4 Air Node, !- Zone Air Node Name Perimeter_bot_ZN_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_mid_ZN_1, !- Zone Name Perimeter_mid_ZN_1 Equipment, !- Zone Conditioning Equipment List Name Perimeter_mid_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_mid_ZN_1 Air Node, !- Zone Air Node Name Perimeter_mid_ZN_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_mid_ZN_2, !- Zone Name Perimeter_mid_ZN_2 Equipment, !- Zone Conditioning Equipment List Name Perimeter_mid_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_mid_ZN_2 Air Node, !- Zone Air Node Name Perimeter_mid_ZN_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_mid_ZN_3, !- Zone Name Perimeter_mid_ZN_3 Equipment, !- Zone Conditioning Equipment List Name Perimeter_mid_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_mid_ZN_3 Air Node, !- Zone Air Node Name Perimeter_mid_ZN_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_mid_ZN_4, !- Zone Name Perimeter_mid_ZN_4 Equipment, !- Zone Conditioning Equipment List Name Perimeter_mid_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_mid_ZN_4 Air Node, !- Zone Air Node Name Perimeter_mid_ZN_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_top_ZN_1, !- Zone Name Perimeter_top_ZN_1 Equipment, !- Zone Conditioning Equipment List Name Perimeter_top_ZN_1 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_top_ZN_1 Air Node, !- Zone Air Node Name Perimeter_top_ZN_1 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_top_ZN_2, !- Zone Name Perimeter_top_ZN_2 Equipment, !- Zone Conditioning Equipment List Name Perimeter_top_ZN_2 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_top_ZN_2 Air Node, !- Zone Air Node Name Perimeter_top_ZN_2 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_top_ZN_3, !- Zone Name Perimeter_top_ZN_3 Equipment, !- Zone Conditioning Equipment List Name Perimeter_top_ZN_3 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_top_ZN_3 Air Node, !- Zone Air Node Name Perimeter_top_ZN_3 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:EquipmentConnections, Perimeter_top_ZN_4, !- Zone Name Perimeter_top_ZN_4 Equipment, !- Zone Conditioning Equipment List Name Perimeter_top_ZN_4 Inlet Nodes, !- Zone Air Inlet Node or NodeList Name , !- Zone Air Exhaust Node or NodeList Name Perimeter_top_ZN_4 Air Node, !- Zone Air Node Name Perimeter_top_ZN_4 Return Air Node Name; !- Zone Return Air Node or NodeList Name ZoneHVAC:AirDistributionUnit, Core_bottom VAV Box, !- Name Core_bottom VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Core_bottom VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Core_mid VAV Box, !- Name Core_mid VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Core_mid VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Core_top VAV Box, !- Name Core_top VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Core_top VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_bot_ZN_1 VAV Box, !- Name Perimeter_bot_ZN_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_bot_ZN_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_bot_ZN_2 VAV Box, !- Name Perimeter_bot_ZN_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_bot_ZN_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_bot_ZN_3 VAV Box, !- Name Perimeter_bot_ZN_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_bot_ZN_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_bot_ZN_4 VAV Box, !- Name Perimeter_bot_ZN_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_bot_ZN_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_mid_ZN_1 VAV Box, !- Name Perimeter_mid_ZN_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_mid_ZN_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_mid_ZN_2 VAV Box, !- Name Perimeter_mid_ZN_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_mid_ZN_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_mid_ZN_3 VAV Box, !- Name Perimeter_mid_ZN_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_mid_ZN_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_mid_ZN_4 VAV Box, !- Name Perimeter_mid_ZN_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_mid_ZN_4 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_top_ZN_1 VAV Box, !- Name Perimeter_top_ZN_1 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_top_ZN_1 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_top_ZN_2 VAV Box, !- Name Perimeter_top_ZN_2 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_top_ZN_2 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_top_ZN_3 VAV Box, !- Name Perimeter_top_ZN_3 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_top_ZN_3 VAV Box Component; !- Air Terminal Name ZoneHVAC:AirDistributionUnit, Perimeter_top_ZN_4 VAV Box, !- Name Perimeter_top_ZN_4 VAV Box Outlet Node Name, !- Air Distribution Unit Outlet Node Name AirTerminal:SingleDuct:VAV:Reheat, !- Air Terminal Object Type Perimeter_top_ZN_4 VAV Box Component; !- Air Terminal Name NodeList, Core_bottom Inlet Nodes, !- Name Core_bottom VAV Box Outlet Node Name; !- Node 1 Name NodeList, Core_mid Inlet Nodes, !- Name Core_mid VAV Box Outlet Node Name; !- Node 1 Name NodeList, Core_top Inlet Nodes, !- Name Core_top VAV Box Outlet Node Name; !- Node 1 Name NodeList, Perimeter_bot_ZN_1 Inlet Nodes, !- Name Perimeter_bot_ZN_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Perimeter_bot_ZN_2 Inlet Nodes, !- Name Perimeter_bot_ZN_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Perimeter_bot_ZN_3 Inlet Nodes, !- Name Perimeter_bot_ZN_3 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Perimeter_bot_ZN_4 Inlet Nodes, !- Name Perimeter_bot_ZN_4 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Perimeter_mid_ZN_1 Inlet Nodes, !- Name Perimeter_mid_ZN_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Perimeter_mid_ZN_2 Inlet Nodes, !- Name Perimeter_mid_ZN_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Perimeter_mid_ZN_3 Inlet Nodes, !- Name Perimeter_mid_ZN_3 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Perimeter_mid_ZN_4 Inlet Nodes, !- Name Perimeter_mid_ZN_4 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Perimeter_top_ZN_1 Inlet Nodes, !- Name Perimeter_top_ZN_1 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Perimeter_top_ZN_2 Inlet Nodes, !- Name Perimeter_top_ZN_2 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Perimeter_top_ZN_3 Inlet Nodes, !- Name Perimeter_top_ZN_3 VAV Box Outlet Node Name; !- Node 1 Name NodeList, Perimeter_top_ZN_4 Inlet Nodes, !- Name Perimeter_top_ZN_4 VAV Box Outlet Node Name; !- Node 1 Name NodeList, VAV_1_OANode List, !- Name VAV_1_OAInlet Node; !- Node 1 Name NodeList, VAV_2_OANode List, !- Name VAV_2_OAInlet Node; !- Node 1 Name NodeList, VAV_3_OANode List, !- Name VAV_3_OAInlet Node; !- Node 1 Name AvailabilityManagerAssignmentList, VAV_1 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_1 Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, VAV_2 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_2 Availability Manager; !- Availability Manager 1 Name AvailabilityManagerAssignmentList, VAV_3 Availability Manager List, !- Name AvailabilityManager:NightCycle, !- Availability Manager 1 Object Type VAV_3 Availability Manager; !- Availability Manager 1 Name AvailabilityManager:NightCycle, VAV_1 Availability Manager, !- Name ALWAYS_ON, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, VAV_2 Availability Manager, !- Name ALWAYS_ON, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} AvailabilityManager:NightCycle, VAV_3 Availability Manager, !- Name ALWAYS_ON, !- Applicability Schedule Name HVACOperationSchd, !- Fan Schedule Name CycleOnAny, !- Control Type 1.0, !- Thermostat Tolerance {deltaC} FixedRunTime, !- Cycling Run Time Control Type 1800; !- Cycling Run Time {s} BranchList, VAV_1 Air Loop Branches, !- Name VAV_1 Air Loop Main Branch; !- Branch 1 Name BranchList, VAV_2 Air Loop Branches, !- Name VAV_2 Air Loop Main Branch; !- Branch 1 Name BranchList, VAV_3 Air Loop Branches, !- Name VAV_3 Air Loop Main Branch; !- Branch 1 Name Branch, VAV_1 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_1_OA, !- Component 1 Name VAV_1 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_1_OA-VAV_1_CoolCNode,!- Component 1 Outlet Node Name CoilSystem:Cooling:DX, !- Component 2 Object Type VAV_1_CoolC, !- Component 2 Name VAV_1_OA-VAV_1_CoolCNode,!- Component 2 Inlet Node Name VAV_1_CoolC-VAV_1_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Fuel, !- Component 3 Object Type VAV_1_HeatC, !- Component 3 Name VAV_1_CoolC-VAV_1_HeatCNode, !- Component 3 Inlet Node Name VAV_1_HeatC-VAV_1_FanNode, !- Component 3 Outlet Node Name Fan:VariableVolume, !- Component 4 Object Type VAV_1_Fan, !- Component 4 Name VAV_1_HeatC-VAV_1_FanNode, !- Component 4 Inlet Node Name VAV_1 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name Branch, VAV_2 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_2_OA, !- Component 1 Name VAV_2 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_2_OA-VAV_2_CoolCNode,!- Component 1 Outlet Node Name CoilSystem:Cooling:DX, !- Component 2 Object Type VAV_2_CoolC, !- Component 2 Name VAV_2_OA-VAV_2_CoolCNode,!- Component 2 Inlet Node Name VAV_2_CoolC-VAV_2_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Fuel, !- Component 3 Object Type VAV_2_HeatC, !- Component 3 Name VAV_2_CoolC-VAV_2_HeatCNode, !- Component 3 Inlet Node Name VAV_2_HeatC-VAV_2_FanNode, !- Component 3 Outlet Node Name Fan:VariableVolume, !- Component 4 Object Type VAV_2_Fan, !- Component 4 Name VAV_2_HeatC-VAV_2_FanNode, !- Component 4 Inlet Node Name VAV_2 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name Branch, VAV_3 Air Loop Main Branch, !- Name , !- Pressure Drop Curve Name AirLoopHVAC:OutdoorAirSystem, !- Component 1 Object Type VAV_3_OA, !- Component 1 Name VAV_3 Supply Equipment Inlet Node, !- Component 1 Inlet Node Name VAV_3_OA-VAV_3_CoolCNode,!- Component 1 Outlet Node Name CoilSystem:Cooling:DX, !- Component 2 Object Type VAV_3_CoolC, !- Component 2 Name VAV_3_OA-VAV_3_CoolCNode,!- Component 2 Inlet Node Name VAV_3_CoolC-VAV_3_HeatCNode, !- Component 2 Outlet Node Name Coil:Heating:Fuel, !- Component 3 Object Type VAV_3_HeatC, !- Component 3 Name VAV_3_CoolC-VAV_3_HeatCNode, !- Component 3 Inlet Node Name VAV_3_HeatC-VAV_3_FanNode, !- Component 3 Outlet Node Name Fan:VariableVolume, !- Component 4 Object Type VAV_3_Fan, !- Component 4 Name VAV_3_HeatC-VAV_3_FanNode, !- Component 4 Inlet Node Name VAV_3 Supply Equipment Outlet Node; !- Component 4 Outlet Node Name AirLoopHVAC:ControllerList, VAV_1_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_1_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, VAV_2_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_2_OA_Controller; !- Controller 1 Name AirLoopHVAC:ControllerList, VAV_3_OA_Controllers, !- Name Controller:OutdoorAir, !- Controller 1 Object Type VAV_3_OA_Controller; !- Controller 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_1_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type VAV_1_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_2_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type VAV_2_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem:EquipmentList, VAV_3_OA_Equipment, !- Name OutdoorAir:Mixer, !- Component 1 Object Type VAV_3_OAMixing Box; !- Component 1 Name AirLoopHVAC:OutdoorAirSystem, VAV_1_OA, !- Name VAV_1_OA_Controllers, !- Controller List Name VAV_1_OA_Equipment; !- Outdoor Air Equipment List Name AirLoopHVAC:OutdoorAirSystem, VAV_2_OA, !- Name VAV_2_OA_Controllers, !- Controller List Name VAV_2_OA_Equipment; !- Outdoor Air Equipment List Name AirLoopHVAC:OutdoorAirSystem, VAV_3_OA, !- Name VAV_3_OA_Controllers, !- Controller List Name VAV_3_OA_Equipment; !- Outdoor Air Equipment List Name OutdoorAir:NodeList, VAV_1_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, VAV_2_OANode List; !- Node or NodeList Name 1 OutdoorAir:NodeList, VAV_3_OANode List; !- Node or NodeList Name 1 OutdoorAir:Node, VAV_1_CoolC Cond OA node;!- Name OutdoorAir:Node, VAV_1_CoolCOA Ref node; !- Name OutdoorAir:Node, VAV_2_CoolC Cond OA node;!- Name OutdoorAir:Node, VAV_2_CoolCOA Ref node; !- Name OutdoorAir:Node, VAV_3_CoolC Cond OA node;!- Name OutdoorAir:Node, VAV_3_CoolCOA Ref node; !- Name OutdoorAir:Mixer, VAV_1_OAMixing Box, !- Name VAV_1_OA-VAV_1_CoolCNode,!- Mixed Air Node Name VAV_1_OAInlet Node, !- Outdoor Air Stream Node Name VAV_1_OARelief Node, !- Relief Air Stream Node Name VAV_1 Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, VAV_2_OAMixing Box, !- Name VAV_2_OA-VAV_2_CoolCNode,!- Mixed Air Node Name VAV_2_OAInlet Node, !- Outdoor Air Stream Node Name VAV_2_OARelief Node, !- Relief Air Stream Node Name VAV_2 Supply Equipment Inlet Node; !- Return Air Stream Node Name OutdoorAir:Mixer, VAV_3_OAMixing Box, !- Name VAV_3_OA-VAV_3_CoolCNode,!- Mixed Air Node Name VAV_3_OAInlet Node, !- Outdoor Air Stream Node Name VAV_3_OARelief Node, !- Relief Air Stream Node Name VAV_3 Supply Equipment Inlet Node; !- Return Air Stream Node Name SetpointManager:MixedAir, VAV_1_CoolC SAT Manager, !- Name Temperature, !- Control Variable VAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_1_HeatC-VAV_1_FanNode, !- Fan Inlet Node Name VAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_1_CoolC-VAV_1_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_1_HeatC MixedAir Manager, !- Name Temperature, !- Control Variable VAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_1_HeatC-VAV_1_FanNode, !- Fan Inlet Node Name VAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_1_HeatC-VAV_1_FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_1_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_1 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_1_HeatC-VAV_1_FanNode, !- Fan Inlet Node Name VAV_1 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_1_OA-VAV_1_CoolCNode;!- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_2_CoolC SAT Manager, !- Name Temperature, !- Control Variable VAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_2_HeatC-VAV_2_FanNode, !- Fan Inlet Node Name VAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_2_CoolC-VAV_2_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_2_HeatC MixedAir Manager, !- Name Temperature, !- Control Variable VAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_2_HeatC-VAV_2_FanNode, !- Fan Inlet Node Name VAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_2_HeatC-VAV_2_FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_2_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_2 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_2_HeatC-VAV_2_FanNode, !- Fan Inlet Node Name VAV_2 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_2_OA-VAV_2_CoolCNode;!- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_3_CoolC SAT Manager, !- Name Temperature, !- Control Variable VAV_3 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_3_HeatC-VAV_3_FanNode, !- Fan Inlet Node Name VAV_3 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_3_CoolC-VAV_3_HeatCNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_3_HeatC MixedAir Manager, !- Name Temperature, !- Control Variable VAV_3 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_3_HeatC-VAV_3_FanNode, !- Fan Inlet Node Name VAV_3 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_3_HeatC-VAV_3_FanNode; !- Setpoint Node or NodeList Name SetpointManager:MixedAir, VAV_3_OAMixed Air Temp Manager, !- Name Temperature, !- Control Variable VAV_3 Supply Equipment Outlet Node, !- Reference Setpoint Node Name VAV_3_HeatC-VAV_3_FanNode, !- Fan Inlet Node Name VAV_3 Supply Equipment Outlet Node, !- Fan Outlet Node Name VAV_3_OA-VAV_3_CoolCNode;!- Setpoint Node or NodeList Name AirLoopHVAC:SupplyPath, VAV_1, !- Name VAV_1 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_1 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, VAV_2, !- Name VAV_2 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_2 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:SupplyPath, VAV_3, !- Name VAV_3 Zone Equipment Inlet Node, !- Supply Air Path Inlet Node Name AirLoopHVAC:ZoneSplitter,!- Component 1 Object Type VAV_3 Supply Air Splitter; !- Component 1 Name AirLoopHVAC:ZoneSplitter, VAV_1 Supply Air Splitter, !- Name VAV_1 Zone Equipment Inlet Node, !- Inlet Node Name Core_bottom VAV Box Inlet Node Name, !- Outlet 1 Node Name Perimeter_bot_ZN_1 VAV Box Inlet Node Name, !- Outlet 2 Node Name Perimeter_bot_ZN_2 VAV Box Inlet Node Name, !- Outlet 3 Node Name Perimeter_bot_ZN_3 VAV Box Inlet Node Name, !- Outlet 4 Node Name Perimeter_bot_ZN_4 VAV Box Inlet Node Name; !- Outlet 5 Node Name AirLoopHVAC:ZoneSplitter, VAV_2 Supply Air Splitter, !- Name VAV_2 Zone Equipment Inlet Node, !- Inlet Node Name Core_mid VAV Box Inlet Node Name, !- Outlet 1 Node Name Perimeter_mid_ZN_1 VAV Box Inlet Node Name, !- Outlet 2 Node Name Perimeter_mid_ZN_2 VAV Box Inlet Node Name, !- Outlet 3 Node Name Perimeter_mid_ZN_3 VAV Box Inlet Node Name, !- Outlet 4 Node Name Perimeter_mid_ZN_4 VAV Box Inlet Node Name; !- Outlet 5 Node Name AirLoopHVAC:ZoneSplitter, VAV_3 Supply Air Splitter, !- Name VAV_3 Zone Equipment Inlet Node, !- Inlet Node Name Core_top VAV Box Inlet Node Name, !- Outlet 1 Node Name Perimeter_top_ZN_1 VAV Box Inlet Node Name, !- Outlet 2 Node Name Perimeter_top_ZN_2 VAV Box Inlet Node Name, !- Outlet 3 Node Name Perimeter_top_ZN_3 VAV Box Inlet Node Name, !- Outlet 4 Node Name Perimeter_top_ZN_4 VAV Box Inlet Node Name; !- Outlet 5 Node Name AirLoopHVAC:ReturnPath, VAV_1 Return Air Path, !- Name VAV_1 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type VAV_1 Return Plenum, !- Component 1 Name AirLoopHVAC:ZoneMixer, !- Component 2 Object Type VAV_1 Return Air Mixer; !- Component 2 Name AirLoopHVAC:ReturnPath, VAV_2 Return Air Path, !- Name VAV_2 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type VAV_2 Return Plenum, !- Component 1 Name AirLoopHVAC:ZoneMixer, !- Component 2 Object Type VAV_2 Return Air Mixer; !- Component 2 Name AirLoopHVAC:ReturnPath, VAV_3 Return Air Path, !- Name VAV_3 Zone Equipment Outlet Node, !- Return Air Path Outlet Node Name AirLoopHVAC:ReturnPlenum,!- Component 1 Object Type VAV_3 Return Plenum, !- Component 1 Name AirLoopHVAC:ZoneMixer, !- Component 2 Object Type VAV_3 Return Air Mixer; !- Component 2 Name AirLoopHVAC:ZoneMixer, VAV_1 Return Air Mixer, !- Name VAV_1 Zone Equipment Outlet Node, !- Outlet Node Name FIRSTFLOOR_PLENUMPlenumOutletNode; !- Inlet 1 Node Name AirLoopHVAC:ZoneMixer, VAV_2 Return Air Mixer, !- Name VAV_2 Zone Equipment Outlet Node, !- Outlet Node Name MIDFLOOR_PLENUMPlenumOutletNode; !- Inlet 1 Node Name AirLoopHVAC:ZoneMixer, VAV_3 Return Air Mixer, !- Name VAV_3 Zone Equipment Outlet Node, !- Outlet Node Name TOPFLOOR_PLENUMPlenumOutletNode; !- Inlet 1 Node Name ! ***SCHEDULES*** Schedule:Compact, Dual Zone Control Type Sched, !- Name Control Type, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,4; !- Field 3 Schedule:Compact, CLGSETP_SCH, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 06:00,26.7, !- Field 3 Until: 22:00,24.0, !- Field 5 Until: 24:00,26.7, !- Field 7 For: Saturday, !- Field 9 Until: 06:00,26.7, !- Field 10 Until: 18:00,24.0, !- Field 12 Until: 24:00,26.7, !- Field 14 For WinterDesignDay, !- Field 16 Until: 24:00,26.7, !- Field 17 For: AllOtherDays, !- Field 19 Until: 24:00,26.7; !- Field 20 Schedule:Compact, HTGSETP_SCH, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays, !- Field 2 Until: 06:00,15.6, !- Field 3 Until: 22:00,21.0, !- Field 5 Until: 24:00,15.6, !- Field 7 For SummerDesignDay, !- Field 9 Until: 24:00,15.6, !- Field 10 For: Saturday, !- Field 12 Until: 06:00,15.6, !- Field 13 Until: 18:00,21.0, !- Field 15 Until: 24:00,15.6, !- Field 17 For: WinterDesignDay, !- Field 19 Until: 24:00,21.0, !- Field 20 For: AllOtherDays, !- Field 22 Until: 24:00,15.6; !- Field 23 Schedule:Compact, HVACOperationSchd, !- Name On/Off, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 06:00,0.0, !- Field 3 Until: 22:00,1.0, !- Field 5 Until: 24:00,0.0, !- Field 7 For: Saturday WinterDesignDay, !- Field 9 Until: 06:00,0.0, !- Field 10 Until: 18:00,1.0, !- Field 12 Until: 24:00,0.0, !- Field 14 For: AllOtherDays, !- Field 16 Until: 24:00,0.0; !- Field 17 Schedule:Compact, MinOA_MotorizedDamper_Sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 07:00,0.0, !- Field 3 Until: 22:00,1.0, !- Field 5 Until: 24:00,0.0, !- Field 7 For: Saturday WinterDesignDay, !- Field 9 Until: 07:00,0.0, !- Field 10 Until: 18:00,1.0, !- Field 12 Until: 24:00,0.0, !- Field 14 For: AllOtherDays, !- Field 16 Until: 24:00,0.0; !- Field 17 Schedule:Compact, Seasonal-Reset-Supply-Air-Temp-Sch, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,12.8; !- Field 3 ! ***SWH EQUIPMENT*** WaterHeater:Mixed, SWHSys1 Water Heater, !- Name 0.3785, !- Tank Volume {m3} SWHSys1 Water Heater Setpoint Temperature Schedule Name, !- Setpoint Temperature Schedule Name 2.0, !- Deadband Temperature Difference {deltaC} 82.2222, !- Maximum Temperature Limit {C} Cycle, !- Heater Control Type 845000, !- Heater Maximum Capacity {W} , !- Heater Minimum Capacity {W} , !- Heater Ignition Minimum Flow Rate {m3/s} , !- Heater Ignition Delay {s} NATURALGAS, !- Heater Fuel Type 0.8, !- Heater Thermal Efficiency , !- Part Load Factor Curve Name 20, !- Off Cycle Parasitic Fuel Consumption Rate {W} NATURALGAS, !- Off Cycle Parasitic Fuel Type 0.8, !- Off Cycle Parasitic Heat Fraction to Tank , !- On Cycle Parasitic Fuel Consumption Rate {W} NATURALGAS, !- On Cycle Parasitic Fuel Type , !- On Cycle Parasitic Heat Fraction to Tank SCHEDULE, !- Ambient Temperature Indicator SWHSys1 Water Heater Ambient Temperature Schedule Name, !- Ambient Temperature Schedule Name , !- Ambient Temperature Zone Name , !- Ambient Temperature Outdoor Air Node Name 6.0, !- Off Cycle Loss Coefficient to Ambient Temperature {W/K} , !- Off Cycle Loss Fraction to Zone 6.0, !- On Cycle Loss Coefficient to Ambient Temperature {W/K} , !- On Cycle Loss Fraction to Zone , !- Peak Use Flow Rate {m3/s} , !- Use Flow Rate Fraction Schedule Name , !- Cold Water Supply Temperature Schedule Name SWHSys1 Pump-SWHSys1 Water HeaterNode, !- Use Side Inlet Node Name SWHSys1 Supply Equipment Outlet Node, !- Use Side Outlet Node Name 1.0, !- Use Side Effectiveness , !- Source Side Inlet Node Name , !- Source Side Outlet Node Name 1.0, !- Source Side Effectiveness AUTOSIZE, !- Use Side Design Flow Rate {m3/s} AUTOSIZE, !- Source Side Design Flow Rate {m3/s} 1.5; !- Indirect Water Heating Recovery Time {hr} WaterUse:Equipment, Core_bottom Water Equipment, !- Name , !- End-Use Subcategory 1.04e-005, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Water Equipment Temp Sched, !- Target Temperature Schedule Name Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Core_bottom, !- Zone Name Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name Water Equipment Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Core_mid Water Equipment,!- Name , !- End-Use Subcategory 1.04e-005, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Water Equipment Temp Sched, !- Target Temperature Schedule Name Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Core_mid, !- Zone Name Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name Water Equipment Latent fract sched; !- Latent Fraction Schedule Name WaterUse:Equipment, Core_top Water Equipment,!- Name , !- End-Use Subcategory 1.04e-005, !- Peak Flow Rate {m3/s} BLDG_SWH_SCH, !- Flow Rate Fraction Schedule Name Water Equipment Temp Sched, !- Target Temperature Schedule Name Water Equipment Hot Supply Temp Sched, !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name Core_top, !- Zone Name Water Equipment Sensible fract sched, !- Sensible Fraction Schedule Name Water Equipment Latent fract sched; !- Latent Fraction Schedule Name Pump:ConstantSpeed, SWHSys1 Pump, !- Name SWHSys1 Supply Inlet Node, !- Inlet Node Name SWHSys1 Pump-SWHSys1 Water HeaterNodeviaConnector, !- Outlet Node Name AUTOSIZE, !- Design Flow Rate {m3/s} 179352, !- Design Pump Head {Pa} AUTOSIZE, !- Design Power Consumption {W} 0.85, !- Motor Efficiency 0.0, !- Fraction of Motor Inefficiencies to Fluid Stream Intermittent, !- Pump Control Type ; !- Pump Flow Rate Schedule Name PlantEquipmentList, SWHSys1 Equipment List, !- Name WaterHeater:Mixed, !- Equipment 1 Object Type SWHSys1 Water Heater; !- Equipment 1 Name ! ***SWH SIZING & CONTROLS*** Sizing:Plant, SWHSys1, !- Plant or Condenser Loop Name Heating, !- Loop Type 60, !- Design Loop Exit Temperature {C} 5.0; !- Loop Design Temperature Difference {deltaC} SetpointManager:Scheduled, SWHSys1 Loop Setpoint Manager, !- Name Temperature, !- Control Variable SWHSys1-Loop-Temp-Schedule, !- Schedule Name SWHSys1 Supply Outlet Node; !- Setpoint Node or NodeList Name PlantEquipmentOperationSchemes, SWHSys1 Loop Operation Scheme List, !- Name PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type SWHSys1 Operation Scheme,!- Control Scheme 1 Name ALWAYS_ON; !- Control Scheme 1 Schedule Name PlantEquipmentOperation:HeatingLoad, SWHSys1 Operation Scheme,!- Name 0.0, !- Load Range 1 Lower Limit {W} 1000000000000000, !- Load Range 1 Upper Limit {W} SWHSys1 Equipment List; !- Range 1 Equipment List Name ! ***SWH LOOP*** PlantLoop, SWHSys1, !- Name Water, !- Fluid Type , !- User Defined Fluid Type SWHSys1 Loop Operation Scheme List, !- Plant Equipment Operation Scheme Name SWHSys1 Supply Outlet Node, !- Loop Temperature Setpoint Node Name 60.0, !- Maximum Loop Temperature {C} 10.0, !- Minimum Loop Temperature {C} AUTOSIZE, !- Maximum Loop Flow Rate {m3/s} 0.0, !- Minimum Loop Flow Rate {m3/s} AUTOSIZE, !- Plant Loop Volume {m3} SWHSys1 Supply Inlet Node, !- Plant Side Inlet Node Name SWHSys1 Supply Outlet Node, !- Plant Side Outlet Node Name SWHSys1 Supply Branches, !- Plant Side Branch List Name SWHSys1 Supply Connectors, !- Plant Side Connector List Name SWHSys1 Demand Inlet Node, !- Demand Side Inlet Node Name SWHSys1 Demand Outlet Node, !- Demand Side Outlet Node Name SWHSys1 Demand Branches, !- Demand Side Branch List Name SWHSys1 Demand Connectors, !- Demand Side Connector List Name Optimal; !- Load Distribution Scheme ! ***SWH CONNECTIONS*** BranchList, SWHSys1 Demand Branches, !- Name SWHSys1 Demand Inlet Branch, !- Branch 1 Name SWHSys1 Demand Load Branch 1, !- Branch 2 Name SWHSys1 Demand Load Branch 2, !- Branch 3 Name SWHSys1 Demand Load Branch 3, !- Branch 4 Name SWHSys1 Demand Bypass Branch, !- Branch 5 Name SWHSys1 Demand Outlet Branch; !- Branch 6 Name BranchList, SWHSys1 Supply Branches, !- Name SWHSys1 Supply Inlet Branch, !- Branch 1 Name SWHSys1 Supply Equipment Branch, !- Branch 2 Name SWHSys1 Supply Equipment Bypass Branch, !- Branch 3 Name SWHSys1 Supply Outlet Branch; !- Branch 4 Name Branch, SWHSys1 Demand Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SWHSys1 Demand Bypass Pipe, !- Component 1 Name SWHSys1 Demand Bypass Pipe Inlet Node, !- Component 1 Inlet Node Name SWHSys1 Demand Bypass Pipe Outlet Node; !- Component 1 Outlet Node Name Branch, SWHSys1 Demand Inlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SWHSys1 Demand Inlet Pipe, !- Component 1 Name SWHSys1 Demand Inlet Node, !- Component 1 Inlet Node Name SWHSys1 Demand Inlet Pipe-SWHSys1 Demand Mixer; !- Component 1 Outlet Node Name Branch, SWHSys1 Demand Load Branch 1, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Core_bottom Water Equipment, !- Component 1 Name Core_bottom Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name Core_bottom Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name Branch, SWHSys1 Demand Load Branch 2, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Core_mid Water Equipment,!- Component 1 Name Core_mid Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name Core_mid Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name Branch, SWHSys1 Demand Load Branch 3, !- Name , !- Pressure Drop Curve Name WaterUse:Connections, !- Component 1 Object Type Core_top Water Equipment,!- Component 1 Name Core_top Water Equipment Water Inlet Node, !- Component 1 Inlet Node Name Core_top Water Equipment Water Outlet Node; !- Component 1 Outlet Node Name Branch, SWHSys1 Demand Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SWHSys1 Demand Outlet Pipe, !- Component 1 Name SWHSys1 Demand Mixer-SWHSys1 Demand Outlet Pipe, !- Component 1 Inlet Node Name SWHSys1 Demand Outlet Node; !- Component 1 Outlet Node Name Branch, SWHSys1 Supply Equipment Branch, !- Name , !- Pressure Drop Curve Name WaterHeater:Mixed, !- Component 1 Object Type SWHSys1 Water Heater, !- Component 1 Name SWHSys1 Pump-SWHSys1 Water HeaterNode, !- Component 1 Inlet Node Name SWHSys1 Supply Equipment Outlet Node; !- Component 1 Outlet Node Name Branch, SWHSys1 Supply Equipment Bypass Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SWHSys1 Supply Equipment Bypass Pipe, !- Component 1 Name SWHSys1 Supply Equip Bypass Inlet Node, !- Component 1 Inlet Node Name SWHSys1 Supply Equip Bypass Outlet Node; !- Component 1 Outlet Node Name Branch, SWHSys1 Supply Inlet Branch, !- Name , !- Pressure Drop Curve Name Pump:ConstantSpeed, !- Component 1 Object Type SWHSys1 Pump, !- Component 1 Name SWHSys1 Supply Inlet Node, !- Component 1 Inlet Node Name SWHSys1 Pump-SWHSys1 Water HeaterNodeviaConnector; !- Component 1 Outlet Node Name Branch, SWHSys1 Supply Outlet Branch, !- Name , !- Pressure Drop Curve Name Pipe:Adiabatic, !- Component 1 Object Type SWHSys1 Supply Outlet Pipe, !- Component 1 Name SWHSys1 Supply Mixer-SWHSys1 Supply Outlet Pipe, !- Component 1 Inlet Node Name SWHSys1 Supply Outlet Node; !- Component 1 Outlet Node Name ConnectorList, SWHSys1 Demand Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type SWHSys1 Demand Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type SWHSys1 Demand Mixer; !- Connector 2 Name ConnectorList, SWHSys1 Supply Connectors, !- Name Connector:Splitter, !- Connector 1 Object Type SWHSys1 Supply Splitter, !- Connector 1 Name Connector:Mixer, !- Connector 2 Object Type SWHSys1 Supply Mixer; !- Connector 2 Name WaterUse:Connections, Core_bottom Water Equipment, !- Name Core_bottom Water Equipment Water Inlet Node, !- Inlet Node Name Core_bottom Water Equipment Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Core_bottom Water Equipment; !- Water Use Equipment 1 Name WaterUse:Connections, Core_mid Water Equipment,!- Name Core_mid Water Equipment Water Inlet Node, !- Inlet Node Name Core_mid Water Equipment Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Core_mid Water Equipment;!- Water Use Equipment 1 Name WaterUse:Connections, Core_top Water Equipment,!- Name Core_top Water Equipment Water Inlet Node, !- Inlet Node Name Core_top Water Equipment Water Outlet Node, !- Outlet Node Name , !- Supply Water Storage Tank Name , !- Reclamation Water Storage Tank Name , !- Hot Water Supply Temperature Schedule Name , !- Cold Water Supply Temperature Schedule Name , !- Drain Water Heat Exchanger Type , !- Drain Water Heat Exchanger Destination , !- Drain Water Heat Exchanger U-Factor Times Area {W/K} Core_top Water Equipment;!- Water Use Equipment 1 Name Connector:Splitter, SWHSys1 Demand Splitter, !- Name SWHSys1 Demand Inlet Branch, !- Inlet Branch Name SWHSys1 Demand Load Branch 1, !- Outlet Branch 1 Name SWHSys1 Demand Load Branch 2, !- Outlet Branch 2 Name SWHSys1 Demand Load Branch 3, !- Outlet Branch 3 Name SWHSys1 Demand Bypass Branch; !- Outlet Branch 4 Name Connector:Splitter, SWHSys1 Supply Splitter, !- Name SWHSys1 Supply Inlet Branch, !- Inlet Branch Name SWHSys1 Supply Equipment Branch, !- Outlet Branch 1 Name SWHSys1 Supply Equipment Bypass Branch; !- Outlet Branch 2 Name Connector:Mixer, SWHSys1 Demand Mixer, !- Name SWHSys1 Demand Outlet Branch, !- Outlet Branch Name SWHSys1 Demand Load Branch 1, !- Inlet Branch 1 Name SWHSys1 Demand Load Branch 2, !- Inlet Branch 2 Name SWHSys1 Demand Load Branch 3, !- Inlet Branch 3 Name SWHSys1 Demand Bypass Branch; !- Inlet Branch 4 Name Connector:Mixer, SWHSys1 Supply Mixer, !- Name SWHSys1 Supply Outlet Branch, !- Outlet Branch Name SWHSys1 Supply Equipment Branch, !- Inlet Branch 1 Name SWHSys1 Supply Equipment Bypass Branch; !- Inlet Branch 2 Name Pipe:Adiabatic, SWHSys1 Demand Bypass Pipe, !- Name SWHSys1 Demand Bypass Pipe Inlet Node, !- Inlet Node Name SWHSys1 Demand Bypass Pipe Outlet Node; !- Outlet Node Name Pipe:Adiabatic, SWHSys1 Demand Inlet Pipe, !- Name SWHSys1 Demand Inlet Node, !- Inlet Node Name SWHSys1 Demand Inlet Pipe-SWHSys1 Demand Mixer; !- Outlet Node Name Pipe:Adiabatic, SWHSys1 Demand Outlet Pipe, !- Name SWHSys1 Demand Mixer-SWHSys1 Demand Outlet Pipe, !- Inlet Node Name SWHSys1 Demand Outlet Node; !- Outlet Node Name Pipe:Adiabatic, SWHSys1 Supply Equipment Bypass Pipe, !- Name SWHSys1 Supply Equip Bypass Inlet Node, !- Inlet Node Name SWHSys1 Supply Equip Bypass Outlet Node; !- Outlet Node Name Pipe:Adiabatic, SWHSys1 Supply Outlet Pipe, !- Name SWHSys1 Supply Mixer-SWHSys1 Supply Outlet Pipe, !- Inlet Node Name SWHSys1 Supply Outlet Node; !- Outlet Node Name ! ***SWH SCHEDULES*** Schedule:Compact, BLDG_SWH_SCH, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: Weekdays SummerDesignDay, !- Field 2 Until: 05:00,0.05, !- Field 3 Until: 06:00,0.08, !- Field 5 Until: 07:00,0.07, !- Field 7 Until: 08:00,0.19, !- Field 9 Until: 09:00,0.35, !- Field 11 Until: 10:00,0.38, !- Field 13 Until: 11:00,0.39, !- Field 15 Until: 12:00,0.47, !- Field 17 Until: 13:00,0.57, !- Field 19 Until: 14:00,0.54, !- Field 21 Until: 15:00,0.34, !- Field 23 Until: 16:00,0.33, !- Field 25 Until: 17:00,0.44, !- Field 27 Until: 18:00,0.26, !- Field 29 Until: 19:00,0.21, !- Field 31 Until: 20:00,0.15, !- Field 33 Until: 21:00,0.17, !- Field 35 Until: 22:00,0.08, !- Field 37 Until: 24:00,0.05, !- Field 39 For: Saturday WinterDesignDay, !- Field 41 Until: 05:00,0.05, !- Field 42 Until: 06:00,0.08, !- Field 44 Until: 07:00,0.07, !- Field 46 Until: 08:00,0.11, !- Field 48 Until: 09:00,0.15, !- Field 50 Until: 10:00,0.21, !- Field 52 Until: 11:00,0.19, !- Field 54 Until: 12:00,0.23, !- Field 56 Until: 13:00,0.20, !- Field 58 Until: 14:00,0.19, !- Field 60 Until: 15:00,0.15, !- Field 62 Until: 16:00,0.13, !- Field 64 Until: 17:00,0.14, !- Field 66 Until: 21:00,0.07, !- Field 68 Until: 22:00,0.09, !- Field 70 Until: 24:00,0.05, !- Field 72 For: Sunday Holidays AllOtherDays, !- Field 74 Until: 05:00,0.04, !- Field 75 Until: 06:00,0.07, !- Field 77 Until: 11:00,0.04, !- Field 79 Until: 13:00,0.06, !- Field 81 Until: 14:00,0.09, !- Field 83 Until: 15:00,0.06, !- Field 85 Until: 21:00,0.04, !- Field 87 Until: 22:00,0.07, !- Field 89 Until: 24:00,0.04; !- Field 91 Schedule:Compact, Water Equipment Latent fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.05; !- Field 3 Schedule:Compact, Water Equipment Sensible fract sched, !- Name Fraction, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,0.2; !- Field 3 Schedule:Compact, Water Equipment Hot Supply Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,43.3; !- Field 3 Schedule:Compact, Water Equipment Temp Sched, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,43.3; !- Field 3 Schedule:Compact, SWHSys1 Water Heater Ambient Temperature Schedule Name, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,22.0; !- Field 3 Schedule:Compact, SWHSys1 Water Heater Setpoint Temperature Schedule Name, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 Schedule:Compact, SWHSys1-Loop-Temp-Schedule, !- Name Temperature, !- Schedule Type Limits Name Through: 12/31, !- Field 1 For: AllDays, !- Field 2 Until: 24:00,60.0; !- Field 3 ! ***ECONOMICS*** ! IN_EIAMonthlyRateGas, Source EIA historical Nov2003 thru Oct2004 ! Indiana 1999 state average electricity emissions factors based on eGRID, 1065, AirData ! PSI_CS_CommercialElectricService, source http://www.cinergypsi.com/pdfs/RateCS.pdf, effective 2004-05-24 ! PSI_LLF_LowLoadFactorService,source http://www.cinergypsi.com/pdfs/RATELLF.pdf, effective 2004-05-24 UtilityCost:Tariff, PSI_LLF_LowLoadFactorService, !- Name Electricity:Facility, !- Output Meter Name kWh, !- Conversion Factor Choice , !- Energy Conversion Factor , !- Demand Conversion Factor , !- Time of Use Period Schedule Name , !- Season Schedule Name , !- Month Schedule Name HalfHour, !- Demand Window Length 15.00, !- Monthly Charge or Variable Name , !- Minimum Monthly Charge or Variable Name , !- Real Time Pricing Charge Schedule Name , !- Customer Baseline Load Schedule Name Comm Elect; !- Group Name UtilityCost:Charge:Block, AnnualEnergyCharge, !- Utility Cost Charge Block Name PSI_LLF_LowLoadFactorService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name , !- Remaining Into Variable , !- Block Size Multiplier Value or Variable Name 300, !- Block Size 1 Value or Variable Name 0.108222, !- Block 1 Cost per Unit Value or Variable Name 700, !- Block Size 2 Value or Variable Name 0.087021, !- Block 2 Cost per Unit Value or Variable Name 1500, !- Block Size 3 Value or Variable Name 0.078420, !- Block 3 Cost per Unit Value or Variable Name remaining, !- Block Size 4 Value or Variable Name 0.058320; !- Block 4 Cost per Unit Value or Variable Name UtilityCost:Charge:Block, AnnualDemandBaseCharge, !- Utility Cost Charge Block Name PSI_LLF_LowLoadFactorService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name , !- Remaining Into Variable TotalDemand, !- Block Size Multiplier Value or Variable Name 190, !- Block Size 1 Value or Variable Name 0.0, !- Block 1 Cost per Unit Value or Variable Name 110, !- Block Size 2 Value or Variable Name 0.051773, !- Block 2 Cost per Unit Value or Variable Name remaining, !- Block Size 3 Value or Variable Name 0.046965; !- Block 3 Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, FuelCostAdjustEnergyCharge, !- Utility Cost Charge Simple Name PSI_LLF_LowLoadFactorService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name 0.002028; !- Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, QualPollutionControlAdjustEnergyCharge, !- Utility Cost Charge Simple Name PSI_LLF_LowLoadFactorService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name 0.000536; !- Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, SoxNoxRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name PSI_LLF_LowLoadFactorService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name 0.001127; !- Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, DSMRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name PSI_LLF_LowLoadFactorService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name -0.000370; !- Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, PurchPowerTrackerAdjustEnergyCharge, !- Utility Cost Charge Simple Name PSI_LLF_LowLoadFactorService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name -0.000031; !- Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, MidwestISOAdjustEnergyCharge, !- Utility Cost Charge Simple Name PSI_LLF_LowLoadFactorService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name -0.000216; !- Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, CleanCoalRiderEnergyCharge, !- Utility Cost Charge Simple Name PSI_LLF_LowLoadFactorService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name 0.000833; !- Cost per Unit Value or Variable Name UtilityCost:Qualify, MinDemand75kw, !- Utility Cost Qualify Name PSI_LLF_LowLoadFactorService, !- Tariff Name TotalDemand, !- Variable Name Minimum, !- Qualify Type 75, !- Threshold Value or Variable Name Annual, !- Season Count, !- Threshold Test 12; !- Number of Months UtilityCost:Charge:Simple, TaxofeightPercent, !- Utility Cost Charge Simple Name PSI_LLF_LowLoadFactorService, !- Tariff Name SubTotal, !- Source Variable Annual, !- Season Taxes, !- Category Variable Name 0.08; !- Cost per Unit Value or Variable Name !end PSI_LLF_LowLoadFactorService UtilityCost:Tariff, PSI_CS_CommercialElectricService, !- Name Electricity:Facility, !- Output Meter Name kWh, !- Conversion Factor Choice , !- Energy Conversion Factor , !- Demand Conversion Factor , !- Time of Use Period Schedule Name , !- Season Schedule Name , !- Month Schedule Name , !- Demand Window Length 9.40, !- Monthly Charge or Variable Name , !- Minimum Monthly Charge or Variable Name , !- Real Time Pricing Charge Schedule Name , !- Customer Baseline Load Schedule Name Comm Elect; !- Group Name UtilityCost:Charge:Block, AnnualEnergyCharge, !- Utility Cost Charge Block Name PSI_CS_CommercialElectricService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name , !- Remaining Into Variable , !- Block Size Multiplier Value or Variable Name 300, !- Block Size 1 Value or Variable Name 0.082409, !- Block 1 Cost per Unit Value or Variable Name 700, !- Block Size 2 Value or Variable Name 0.072873, !- Block 2 Cost per Unit Value or Variable Name 1500, !- Block Size 3 Value or Variable Name 0.061696, !- Block 3 Cost per Unit Value or Variable Name remaining, !- Block Size 4 Value or Variable Name 0.041179; !- Block 4 Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, FuelCostAdjustEnergyCharge, !- Utility Cost Charge Simple Name PSI_CS_CommercialElectricService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name 0.002028; !- Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, QualPollutionControlAdjustEnergyCharge, !- Utility Cost Charge Simple Name PSI_CS_CommercialElectricService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name 0.000536; !- Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, SoxNoxRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name PSI_CS_CommercialElectricService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name 0.001127; !- Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, DSMRiderAdjustEnergyCharge, !- Utility Cost Charge Simple Name PSI_CS_CommercialElectricService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name 0.000021; !- Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, PurchPowerTrackerAdjustEnergyCharge, !- Utility Cost Charge Simple Name PSI_CS_CommercialElectricService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name 0.000034; !- Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, MidwestISOAdjustEnergyCharge, !- Utility Cost Charge Simple Name PSI_CS_CommercialElectricService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name -0.000203; !- Cost per Unit Value or Variable Name UtilityCost:Charge:Simple, CleanCoalRiderEnergyCharge, !- Utility Cost Charge Simple Name PSI_CS_CommercialElectricService, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name 0.000807; !- Cost per Unit Value or Variable Name UtilityCost:Qualify, MaxDemand75kw, !- Utility Cost Qualify Name PSI_CS_CommercialElectricService, !- Tariff Name TotalDemand, !- Variable Name Maximum, !- Qualify Type 75, !- Threshold Value or Variable Name Annual, !- Season Count, !- Threshold Test 1; !- Number of Months UtilityCost:Charge:Simple, TaxofeightPercent, !- Utility Cost Charge Simple Name PSI_CS_CommercialElectricService, !- Tariff Name SubTotal, !- Source Variable Annual, !- Season Taxes, !- Category Variable Name 0.08; !- Cost per Unit Value or Variable Name UtilityCost:Tariff, IN_EIAMonthlyRateGas, !- Name NaturalGas:Facility, !- Output Meter Name MCF, !- Conversion Factor Choice , !- Energy Conversion Factor , !- Demand Conversion Factor , !- Time of Use Period Schedule Name , !- Season Schedule Name , !- Month Schedule Name , !- Demand Window Length 0.0, !- Monthly Charge or Variable Name , !- Minimum Monthly Charge or Variable Name , !- Real Time Pricing Charge Schedule Name , !- Customer Baseline Load Schedule Name Comm Gas; !- Group Name UtilityCost:Charge:Simple, MonthlyRateGasCharge, !- Utility Cost Charge Simple Name IN_EIAMonthlyRateGas, !- Tariff Name totalEnergy, !- Source Variable Annual, !- Season EnergyCharges, !- Category Variable Name IN_MonthlyGasRates; !- Cost per Unit Value or Variable Name UtilityCost:Variable, IN_MonthlyGasRates, !- Name IN_EIAMonthlyRateGas, !- Tariff Name Currency, !- Variable Type 8.22, !- January Value 7.51, !- February Value 8.97, !- March Value 9.01, !- April Value 9.16, !- May Value 10.44, !- June Value 10.32, !- July Value 10.13, !- August Value 9.20, !- September Value 8.18, !- October Value 7.83, !- November Value 7.63; !- December Value UtilityCost:Charge:Simple, TaxofEightPercent, !- Utility Cost Charge Simple Name IN_EIAMonthlyRateGas, !- Tariff Name SubTotal, !- Source Variable Annual, !- Season Taxes, !- Category Variable Name 0.08; !- Cost per Unit Value or Variable Name ! ***GENERAL REPORTING*** OutputControl:ReportingTolerances, 0.556, !- Tolerance for Time Heating Setpoint Not Met {deltaC} 0.556; !- Tolerance for Time Cooling Setpoint Not Met {deltaC} Output:SQLite, SimpleAndTabular; !- Option Type EnvironmentalImpactFactors, 0.663, !- District Heating Efficiency 4.18, !- District Cooling COP {W/W} 0.585, !- Steam Conversion Efficiency 80.7272, !- Total Carbon Equivalent Emission Factor From N2O {kg/kg} 6.2727, !- Total Carbon Equivalent Emission Factor From CH4 {kg/kg} 0.2727; !- Total Carbon Equivalent Emission Factor From CO2 {kg/kg} ! Indiana electricity source and emission factors based on Deru and Torcellini 2007 FuelFactors, Electricity, !- Existing Fuel Resource Name kg, !- Units of Measure , !- Energy per Unit Factor 3.546, !- Source Energy Factor {J/J} , !- Source Energy Schedule Name 3.417E+02, !- CO2 Emission Factor {g/MJ} , !- CO2 Emission Factor Schedule Name 1.186E-01, !- CO Emission Factor {g/MJ} , !- CO Emission Factor Schedule Name 7.472E-01, !- CH4 Emission Factor {g/MJ} , !- CH4 Emission Factor Schedule Name 6.222E-01, !- NOx Emission Factor {g/MJ} , !- NOx Emission Factor Schedule Name 8.028E-03, !- N2O Emission Factor {g/MJ} , !- N2O Emission Factor Schedule Name 1.872E+00, !- SO2 Emission Factor {g/MJ} , !- SO2 Emission Factor Schedule Name 0.0, !- PM Emission Factor {g/MJ} , !- PM Emission Factor Schedule Name 1.739E-02, !- PM10 Emission Factor {g/MJ} , !- PM10 Emission Factor Schedule Name 0.0, !- PM2.5 Emission Factor {g/MJ} , !- PM2.5 Emission Factor Schedule Name 0.0, !- NH3 Emission Factor {g/MJ} , !- NH3 Emission Factor Schedule Name 1.019E-02, !- NMVOC Emission Factor {g/MJ} , !- NMVOC Emission Factor Schedule Name 5.639E-06, !- Hg Emission Factor {g/MJ} , !- Hg Emission Factor Schedule Name 2.778E-05, !- Pb Emission Factor {g/MJ} , !- Pb Emission Factor Schedule Name 0.4309556, !- Water Emission Factor {L/MJ} , !- Water Emission Factor Schedule Name 0, !- Nuclear High Level Emission Factor {g/MJ} , !- Nuclear High Level Emission Factor Schedule Name 0; !- Nuclear Low Level Emission Factor {m3/MJ} ! Deru and Torcellini 2007 ! Source Energy and Emission Factors for Energy Use in Buildings ! NREL/TP-550-38617 ! source factor and Higher Heating Values from Table 5 ! post-combustion emission factors for boiler from Table 9 (with factor of 1000 correction for natural gas) FuelFactors, NaturalGas, !- Existing Fuel Resource Name m3, !- Units of Measure 37631000, !- Energy per Unit Factor 1.092, !- Source Energy Factor {J/J} , !- Source Energy Schedule Name 5.21E+01, !- CO2 Emission Factor {g/MJ} , !- CO2 Emission Factor Schedule Name 3.99E-02, !- CO Emission Factor {g/MJ} , !- CO Emission Factor Schedule Name 1.06E-03, !- CH4 Emission Factor {g/MJ} , !- CH4 Emission Factor Schedule Name 4.73E-02, !- NOx Emission Factor {g/MJ} , !- NOx Emission Factor Schedule Name 1.06E-03, !- N2O Emission Factor {g/MJ} , !- N2O Emission Factor Schedule Name 2.68E-04, !- SO2 Emission Factor {g/MJ} , !- SO2 Emission Factor Schedule Name 0.0, !- PM Emission Factor {g/MJ} , !- PM Emission Factor Schedule Name 3.59E-03, !- PM10 Emission Factor {g/MJ} , !- PM10 Emission Factor Schedule Name 0.0, !- PM2.5 Emission Factor {g/MJ} , !- PM2.5 Emission Factor Schedule Name 0, !- NH3 Emission Factor {g/MJ} , !- NH3 Emission Factor Schedule Name 2.61E-03, !- NMVOC Emission Factor {g/MJ} , !- NMVOC Emission Factor Schedule Name 1.11E-07, !- Hg Emission Factor {g/MJ} , !- Hg Emission Factor Schedule Name 2.13E-07, !- Pb Emission Factor {g/MJ} , !- Pb Emission Factor Schedule Name 0, !- Water Emission Factor {L/MJ} , !- Water Emission Factor Schedule Name 0, !- Nuclear High Level Emission Factor {g/MJ} , !- Nuclear High Level Emission Factor Schedule Name 0; !- Nuclear Low Level Emission Factor {m3/MJ} OutputControl:Table:Style, HTML; !- Column Separator Output:Table:SummaryReports, AllSummary; !- Report 1 Name Output:Meter,Electricity:Facility,hourly; Output:Meter,Heating:Electricity,hourly; Output:Meter,Cooling:Electricity,hourly; Output:Meter,InteriorLights:Electricity,hourly; Output:Meter,ExteriorLights:Electricity,hourly; Output:Meter,InteriorEquipment:Electricity,hourly; Output:Meter,ExteriorEquipment:Electricity,hourly; Output:Meter,Fans:Electricity,hourly; Output:Meter,Pumps:Electricity,hourly; Output:Meter,HeatRejection:Electricity,hourly; Output:Meter,Humidifier:Electricity,hourly; Output:Meter,Refrigeration:Electricity,hourly; Output:Meter,WaterSystems:Electricity,hourly; Output:Meter,NaturalGas:Facility,hourly; Output:Meter,Heating:NaturalGas,hourly; Output:Meter,InteriorEquipment:NaturalGas,hourly; Output:Meter,WaterSystems:NaturalGas,hourly;